Choose a Category
For Shaft Diameter For Shaft Diameter |
|---|
ID ID |
|---|
OD OD |
|---|
For Load Direction For Load Direction |
|---|
 | Thrust |
 | Combined Radial and Thrust |
Dynamic Thrust Load Capacity Dynamic ThrustLoad Capacity |
|---|
For Housing ID For Housing ID |
|---|
|
|
|
Dynamic Radial Load Capacity Dynamic RadialLoad Capacity |
|---|
|
About Plain Bearings
More
Ultra-Low-Friction Dry-Running Thrust Bearings
Use these bearings in applications with frequent starts and stops because they operate with very little friction.
PTFE bearings have good chemical resistance.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| OD | Thick. | Dynamic Thrust Load Capacity | Color | Temperature Range, °F | Each | |
PTFE Plastic Bearings | ||||||
|---|---|---|---|---|---|---|
For 1/4" Shaft Dia. | ||||||
| 5/8" | 1/16" | 13 lbs. @ 120 rpm | White | -350° to 500° | 0000000 | 00000 |
For 3/8" Shaft Dia. | ||||||
| 3/4" | 1/16" | 14 lbs. @ 120 rpm | White | -350° to 500° | 0000000 | 0000 |
For 1/2" Shaft Dia. | ||||||
| 1" | 1/16" | 18 lbs. @ 120 rpm | White | -350° to 500° | 0000000 | 0000 |
For 3/4" Shaft Dia. | ||||||
| 1 3/8" | 1/8" | 48 lbs. @ 60 rpm | White | -350° to 500° | 0000000 | 00000 |
For 1" Shaft Dia. | ||||||
| 2" | 1/8" | 75 lbs. @ 60 rpm | White | -350° to 500° | 0000000 | 00000 |
For 1 1/2" Shaft Dia. | ||||||
| 3" | 1/8" | 225 lbs. @ 30 rpm | White | -350° to 500° | 0000000 | 00000 |
High-Load Dry-Running Thrust Bearings
A steel backing adds strength to these slippery PTFE bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| OD, mm | Thick., mm | Dynamic Thrust Load Capacity | Temperature Range, °F | Each | |
Steel-Backed PTFE Plastic Bearings | |||||
|---|---|---|---|---|---|
For 10 mm Shaft Dia. | |||||
| 20 | 1.5 | 730 lbs. @ 120 rpm | -320° to 530° | 0000000 | 00000 |
For 12 mm Shaft Dia. | |||||
| 24 | 1.5 | 880 lbs. @ 120 rpm | -320° to 530° | 0000000 | 0000 |
For 18 mm Shaft Dia. | |||||
| 32 | 1.5 | 2,150 lbs. @ 60 rpm | -320° to 530° | 0000000 | 0000 |
For 20 mm Shaft Dia. | |||||
| 36 | 1.5 | 2,400 lbs. @ 60 rpm | -320° to 530° | 0000000 | 0000 |
For 26 mm Shaft Dia. | |||||
| 44 | 1.5 | 5,600 lbs. @ 30 rpm | -320° to 530° | 0000000 | 00000 |
For 28 mm Shaft Dia. | |||||
| 48 | 1.5 | 6,200 lbs. @ 30 rpm | -320° to 530° | 0000000 | 00000 |
For 32 mm Shaft Dia. | |||||
| 54 | 1.5 | 6,850 lbs. @ 30 rpm | -320° to 530° | 0000000 | 00000 |
For 38 mm Shaft Dia. | |||||
| 62 | 1.5 | 7,600 lbs. @ 30 rpm | -320° to 530° | 0000000 | 00000 |
For 42 mm Shaft Dia. | |||||
| 66 | 1.5 | 7,700 lbs. @ 30 rpm | -320° to 530° | 0000000 | 00000 |
Multipurpose Dry-Running Flanged Sleeve Bearings
Reinforced with polyester fabric, these plastic bearings have load and speed capabilities comparable to metal bearings. Bearings resist corrosion in outdoor and saltwater environments.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Color | Temperature Range, °F | Each | |
Polyester Fabric-Reinforced PTFE Plastic Bearings | |||||||||
|---|---|---|---|---|---|---|---|---|---|
For 5/16" Shaft Dia. | |||||||||
| 9/16" | 1/2" | 11/16" | 1/16" | 390 lbs. @ 120 rpm | 340 lbs. @ 120 rpm | Blue | -40° to 150° | 0000000 | 000000 |
| 5/8" | 3/4" | 7/8" | 1/8" | 590 lbs. @ 120 rpm | 470 lbs. @ 120 rpm | Blue | -40° to 150° | 0000000 | 00000 |
For 3/8" Shaft Dia. | |||||||||
| 5/8" | 1/2" | 7/8" | 1/16" | 390 lbs. @ 120 rpm | 440 lbs. @ 120 rpm | Blue | -40° to 150° | 000000 | 00000 |
| 5/8" | 3/4" | 7/8" | 1/16" | 590 lbs. @ 120 rpm | 440 lbs. @ 120 rpm | Blue | -40° to 150° | 0000000 | 00000 |
| 5/8" | 1" | 7/8" | 1/16" | 790 lbs. @ 120 rpm | 440 lbs. @ 120 rpm | Blue | -40° to 150° | 0000000 | 00000 |
For 1/2" Shaft Dia. | |||||||||
| 3/4" | 1/2" | 1" | 1/8" | 390 lbs. @ 120 rpm | 460 lbs. @ 120 rpm | Blue | -40° to 150° | 0000000 | 00000 |
| 3/4" | 3/4" | 1" | 1/8" | 590 lbs. @ 120 rpm | 460 lbs. @ 120 rpm | Blue | -40° to 150° | 0000000 | 00000 |
| 3/4" | 1" | 1" | 1/8" | 790 lbs. @ 120 rpm | 460 lbs. @ 120 rpm | Blue | -40° to 150° | 0000000 | 00000 |
For 5/8" Shaft Dia. | |||||||||
| 7/8" | 1/2" | 1 1/8" | 1/8" | 790 lbs. @ 60 rpm | 960 lbs. @ 60 rpm | Blue | -40° to 150° | 0000000 | 0000 |
| 7/8" | 5/8" | 1 1/8" | 1/8" | 990 lbs. @ 60 rpm | 960 lbs. @ 60 rpm | Blue | -40° to 150° | 0000000 | 00000 |
| 7/8" | 3/4" | 1 1/8" | 1/8" | 1,150 lbs. @ 60 rpm | 960 lbs. @ 60 rpm | Blue | -40° to 150° | 0000000 | 00000 |
| 7/8" | 1" | 1 1/8" | 1/8" | 1,550 lbs. @ 60 rpm | 960 lbs. @ 60 rpm | Blue | -40° to 150° | 0000000 | 00000 |
| 7/8" | 1 1/4" | 1 1/8" | 1/8" | 1,950 lbs. @ 60 rpm | 960 lbs. @ 60 rpm | Blue | -40° to 150° | 0000000 | 00000 |
| 7/8" | 1 1/4" | 1 1/4" | 1/8" | 1,950 lbs. @ 60 rpm | 1,150 lbs. @ 60 rpm | Blue | -40° to 150° | 000000 | 00000 |
For 3/4" Shaft Dia. | |||||||||
| 1" | 5/8" | 1 1/4" | 3/16" | 990 lbs. @ 60 rpm | 990 lbs. @ 60 rpm | Blue | -40° to 150° | 0000000 | 00000 |
| 1" | 3/4" | 1 1/4" | 1/8" | 1,150 lbs. @ 60 rpm | 1,000 lbs. @ 60 rpm | Blue | -40° to 150° | 0000000 | 00000 |
| 1" | 1" | 1 1/4" | 3/16" | 1,550 lbs. @ 60 rpm | 990 lbs. @ 60 rpm | Blue | -40° to 150° | 0000000 | 00000 |
| 1" | 1 1/4" | 1 1/4" | 3/16" | 1,950 lbs. @ 60 rpm | 990 lbs. @ 60 rpm | Blue | -40° to 150° | 0000000 | 00000 |
For 7/8" Shaft Dia. | |||||||||
| 1 1/8" | 3/4" | 1 1/2" | 1/8" | 1,150 lbs. @ 60 rpm | 1,200 lbs. @ 60 rpm | Blue | -40° to 150° | 0000000 | 00000 |
| 1 1/8" | 1" | 1 1/2" | 1/8" | 1,550 lbs. @ 60 rpm | 1,200 lbs. @ 60 rpm | Blue | -40° to 150° | 0000000 | 00000 |
| 1 1/8" | 1 1/4" | 1 1/2" | 1/8" | 1,950 lbs. @ 60 rpm | 1,200 lbs. @ 60 rpm | Blue | -40° to 150° | 0000000 | 00000 |
For 1" Shaft Dia. | |||||||||
| 1 1/4" | 3/4" | 1 1/2" | 1/8" | 1,150 lbs. @ 60 rpm | 1,000 lbs. @ 60 rpm | Blue | -40° to 150° | 0000000 | 00000 |
| 1 1/4" | 1" | 1 1/2" | 1/8" | 1,550 lbs. @ 60 rpm | 1,000 lbs. @ 60 rpm | Blue | -40° to 150° | 0000000 | 00000 |
| 1 1/4" | 1 1/4" | 1 1/2" | 1/8" | 1,950 lbs. @ 60 rpm | 1,000 lbs. @ 60 rpm | Blue | -40° to 150° | 0000000 | 00000 |
| 1 1/4" | 1 1/2" | 1 1/2" | 1/8" | 2,350 lbs. @ 60 rpm | 1,000 lbs. @ 60 rpm | Blue | -40° to 150° | 0000000 | 00000 |
For 1 1/4" Shaft Dia. | |||||||||
| 1 1/2" | 1" | 1 3/4" | 3/16" | 3,150 lbs. @ 30 rpm | 2,100 lbs. @ 30 rpm | Blue | -40° to 150° | 000000 | 00000 |
| 1 1/2" | 1 1/4" | 1 3/4" | 1/4" | 3,950 lbs. @ 30 rpm | 2,100 lbs. @ 30 rpm | Blue | -40° to 150° | 0000000 | 00000 |
| 1 1/2" | 1 1/2" | 1 3/4" | 3/16" | 4,750 lbs. @ 30 rpm | 2,100 lbs. @ 30 rpm | Blue | -40° to 150° | 0000000 | 00000 |
For 1 3/8" Shaft Dia. | |||||||||
| 1 5/8" | 1" | 2" | 1/8" | 3,150 lbs. @ 30 rpm | 2,600 lbs. @ 30 rpm | Blue | -40° to 150° | 0000000 | 00000 |
For 1 1/2" Shaft Dia. | |||||||||
| 1 3/4" | 1 1/2" | 2" | 1/4" | 4,750 lbs. @ 30 rpm | 2,150 lbs. @ 30 rpm | Blue | -40° to 150° | 0000000 | 00000 |
For 1 3/4" Shaft Dia. | |||||||||
| 2" | 1 3/4" | 2 1/4" | 1/4" | 5,550 lbs. @ 30 rpm | 2,200 lbs. @ 30 rpm | Blue | -40° to 150° | 0000000 | 00000 |
For 2" Shaft Dia. | |||||||||
| 2 1/4" | 2" | 2 1/2" | 1/4" | 6,350 lbs. @ 30 rpm | 2,250 lbs. @ 30 rpm | Blue | -40° to 150° | 0000000 | 00000 |
Metric Polyester Fabric-Reinforced PTFE Plastic Bearings | |||||||||
For 9mm Shaft Dia. | |||||||||
| 14mm | 10mm | 19mm | 2.5mm | 310 lbs. @ 120 rpm | 360 lbs. @ 120 rpm | Blue | -40° to 150° | 0000000 | 00000 |
For 10mm Shaft Dia. | |||||||||
| 15mm | 10mm | 21mm | 3mm | 310 lbs. @ 120 rpm | 390 lbs. @ 120 rpm | Blue | -40° to 150° | 0000000 | 00000 |
| 15mm | 20mm | 21mm | 3mm | 620 lbs. @ 120 rpm | 390 lbs. @ 120 rpm | Blue | -40° to 150° | 0000000 | 00000 |
For 12mm Shaft Dia. | |||||||||
| 18mm | 8mm | 24mm | 3mm | 250 lbs. @ 120 rpm | 440 lbs. @ 120 rpm | Blue | -40° to 150° | 0000000 | 00000 |
| 18mm | 12mm | 24mm | 3mm | 370 lbs. @ 120 rpm | 440 lbs. @ 120 rpm | Blue | -40° to 150° | 0000000 | 00000 |
| 18mm | 20mm | 24mm | 3mm | 620 lbs. @ 120 rpm | 440 lbs. @ 120 rpm | Blue | -40° to 150° | 0000000 | 00000 |
For 16mm Shaft Dia. | |||||||||
| 22mm | 16mm | 28mm | 2mm | 1,000 lbs. @ 60 rpm | 920 lbs. @ 60 rpm | Blue | -40° to 150° | 0000000 | 0000 |
For 20mm Shaft Dia. | |||||||||
| 26mm | 16mm | 32mm | 3mm | 1,000 lbs. @ 60 rpm | 960 lbs. @ 60 rpm | Blue | -40° to 150° | 0000000 | 00000 |
| 26mm | 20mm | 32mm | 3mm | 1,250 lbs. @ 60 rpm | 960 lbs. @ 60 rpm | Blue | -40° to 150° | 0000000 | 00000 |
For 25mm Shaft Dia. | |||||||||
| 30mm | 20mm | 39mm | 3.5mm | 1,250 lbs. @ 60 rpm | 1,100 lbs. @ 60 rpm | Blue | -40° to 150° | 0000000 | 00000 |
| 32mm | 20mm | 39mm | 3.5mm | 1,250 lbs. @ 60 rpm | 1,100 lbs. @ 60 rpm | Blue | -40° to 150° | 0000000 | 00000 |
For 30mm Shaft Dia. | |||||||||
| 38mm | 20mm | 46mm | 4mm | 2,500 lbs. @ 30 rpm | 2,600 lbs. @ 30 rpm | Blue | -40° to 150° | 0000000 | 00000 |
For 40mm Shaft Dia. | |||||||||
| 46mm | 20mm | 56mm | 5mm | 2,500 lbs. @ 30 rpm | 2,700 lbs. @ 30 rpm | Blue | -40° to 150° | 0000000 | 00000 |
| 50mm | 30mm | 60mm | 5mm | 3,750 lbs. @ 30 rpm | 3,250 lbs. @ 30 rpm | Blue | -40° to 150° | 0000000 | 00000 |
For 50mm Shaft Dia. | |||||||||
| 56mm | 30mm | 62mm | 3mm | 3,750 lbs. @ 30 rpm | 2,100 lbs. @ 30 rpm | Blue | -40° to 150° | 0000000 | 00000 |
For 60mm Shaft Dia. | |||||||||
| 70mm | 50mm | 80mm | 5mm | 6,250 lbs. @ 30 rpm | 3,400 lbs. @ 30 rpm | Blue | -40° to 150° | 0000000 | 00000 |