Cable Core Material Cable Core Material |
|---|
|
Dynamic Push Load Capacity Dynamic Push Load Capacity |
|---|
|
|
Dynamic Pull Load Capacity Dynamic Pull Load Capacity |
|---|
|
|
Fitting Length Fitting Length |
|---|
|
|
|
Fitting Material Fitting Material |
|---|
|
About Rod Ends
More
Trigger-Lever Push/Pull Control Cables
Control this flexible, ready-to-use cable with the attached trigger-style spring-return lever. Weave it around obstructions to operate valves, throttle controls, and HVAC damper controls from a distance. It can be mounted to a tube with a screw (not included).
Cable | Dynamic Load Cap., lbs. | Lever | Tube-Mount Cables | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Lg. | OD | Core Dia. | Max. Stroke Lg. | Push | Pull | Bend Radius | For Mount. Tube Dia. | Material | Actuation | Ht. | Lg. | Temp. Range, °F | Mount. Fasteners Included | For Screw Size | No. of Mount. Holes | Mount. Hole Dia. | Each | |
Steel Cable Core with Plastic Cover | ||||||||||||||||||
| 10' | 0.22" | 0.06" | 0.69" | 20 | 20 | 3 1/2" | 3/4"-1" | Plastic | Hand | 1 1/2" | 3 3/4" | 0° to 120° | No | No. 10 | 1 | 0.2" | 0000000 | 000000 |
Turn-Lock Push/Pull Control Cables
Pull and turn the knob to lock, so it's secure in applications where severe vibration is a concern. Flexible for weaving around obstructions, these ready-to-use cables operate valves, throttle controls, and HVAC damper controls from a distance. The cables can be cut to length. They can also be panel mounted.
Cable | Dynamic Load Cap., lbs. | Knob | Panel-Mount Cables | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Lg. | Outer Dia. | Core Dia. | Max. Stroke Lg. | Push | Pull | Bend Radius | Material | Dia. | Thread Size | Temp. Range, °F | Each | |
Stainless Steel Cable Core with Plastic Cover | ||||||||||||
| 9' | 0.31" | 0.085" | 3" | 25 | 25 | 6" | Plastic | 2 1/2" | 5/8"-18 | -40° to 225° | 0000000 | 000000 |
| 15' | 0.31" | 0.085" | 3" | 25 | 25 | 6" | Plastic | 2 1/2" | 5/8"-18 | -40° to 225° | 0000000 | 00000 |
| 25' | 0.31" | 0.085" | 3" | 25 | 25 | 6" | Plastic | 2 1/2" | 5/8"-18 | -40° to 225° | 0000000 | 00000 |
Precision Turn-Lock Push/Pull Control Cables
Use these cables for high-precision motion control. Tighten the locknut to secure your setting in applications where severe vibration is a concern. Flexible for weaving around obstructions, these ready-to-use cables operate valves, throttle controls, and HVAC damper controls from a distance. The cable can be cut to length. It can also be panel mounted.
Cable | Dynamic Load Cap., lbs. | Knob | Panel-Mount Cables | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Lg. | Outer Dia. | Core Dia. | Max. Stroke Lg. | Push | Pull | Bend Radius | Material | Dia. | Thread Size | Temp. Range, °F | Each | |
Stainless Steel Cable Core with Plastic Cover | ||||||||||||
| 5' | 0.31" | 0.085" | 3" | 25 | 25 | 6" | Plastic | 1.62" | 3/4"-16 | -40° to 225° | 000000 | 000000 |
Push/Pull Control Cables
Use the attached knob to control these flexible, ready-to-use cables. Weave them around obstructions to operate valves, throttle controls, and HVAC damper controls from a distance. The cables can be cut to length. They can also be panel mounted.
Cable | Dynamic Load Cap., lbs. | Knob | Panel-Mount Cables | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Lg. | OD | Core Dia. | Max. Stroke Lg. | Push | Pull | Bend Radius | Material | Dia. | Thread Size | Temp. Range, °F | Each | |
Stainless Steel Cable Core with Plastic Cover | ||||||||||||
| 10'8" | 0.31" | 0.085" | 5" | 50 | 50 | 6" | Plastic | 2" | 1/2"-20 | -40° to 225° | 000000 | 000000 |
| 15'8" | 0.31" | 0.085" | 5" | 50 | 50 | 6" | Plastic | 2" | 1/2"-20 | -40° to 225° | 000000 | 00000 |
Low-Friction Create-Your-Own Push/Pull Control Cables
A splined core limits contact points on the cable’s liner, so the core slides back and forth smoothly and keeps the cable from twisting. Pair these cables with a knob or lever (not included) to operate valves, throttle controls, and HVAC damper controls from a distance. They're flexible for weaving around obstructions.
Clamp-mount cables have threaded fittings on both ends and a grooved body for mounting with strap clamps or U-bolts.
Panel-mount cables are also known as bulkhead mount cables. They have threaded fittings with hex nuts and washers at each end for mounting through a panel.
Thread | Dynamic Load Cap., lbs. | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Size | Lg. | O'all Lg., ft. | Max. Stroke Lg. | Push | Pull | Bend Radius | Temp. Range, °F | For Clamp Hole Dia. | Fitting Lg. | Each | |
Steel Cable Core with Plastic Cover | |||||||||||
| 10-32 | 7/8" | 4 | 3" | 40 | 50 | 8" | -40° to 210° | 7/16" | 8" | 0000000 | 000000 |
| 1/4"-28 | 1" | 3 | 3" | 130 | 170 | 8" | -40° to 210° | 9/16" | 8 3/8" | 0000000 | 00000 |
| 1/4"-28 | 1" | 4 | 3" | 130 | 170 | 8" | -40° to 210° | 9/16" | 8 3/8" | 0000000 | 00000 |
| 1/4"-28 | 1" | 6 | 2" | 150 | 170 | 8" | -40° to 210° | 9/16" | 6 7/8" | 0000000 | 00000 |
| 1/4"-28 | 1" | 6 | 3" | 130 | 170 | 8" | -40° to 210° | 9/16" | 8 3/8" | 0000000 | 00000 |
| 1/4"-28 | 1" | 6 | 4" | 110 | 170 | 8" | -40° to 210° | 9/16" | 9 7/8" | 0000000 | 00000 |
| 1/4"-28 | 1" | 15 | 4" | 110 | 170 | 8" | -40° to 210° | 9/16" | 9 7/8" | 0000000 | 00000 |
Thread | Dynamic Load Cap., lbs. | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Size | Lg. | O'all Lg., ft. | Max. Stroke Lg. | Push | Pull | Bend Radius | Temp. Range, °F | For Panel Cutout Dia. | Fitting Lg. | Each | |
Steel Cable Core with Plastic Cover | |||||||||||
| 10-32 | 7/8" | 4 | 3" | 40 | 50 | 8" | -40° to 210° | 7/16" | 8 53/64" | 0000000 | 000000 |
| 1/4"-28 | 1" | 3 | 3" | 130 | 170 | 8" | -40° to 210° | 5/8" | 9 25/64" | 0000000 | 00000 |
| 1/4"-28 | 1" | 4 | 3" | 130 | 170 | 8" | -40° to 210° | 5/8" | 9 25/64" | 0000000 | 00000 |
| 1/4"-28 | 1" | 6 | 2" | 150 | 170 | 8" | -40° to 210° | 5/8" | 7 57/64" | 0000000 | 00000 |
| 1/4"-28 | 1" | 6 | 3" | 130 | 170 | 8" | -40° to 210° | 5/8" | 9 25/64" | 0000000 | 00000 |
| 1/4"-28 | 1" | 6 | 4" | 110 | 170 | 8" | -40° to 210° | 5/8" | 10 57/64" | 0000000 | 00000 |
| 1/4"-28 | 1" | 15 | 4" | 110 | 170 | 8" | -40° to 210° | 5/8" | 10 57/64" | 00000000 | 00000 |
Dynamic Load Cap., lbs. | ||||||||
|---|---|---|---|---|---|---|---|---|
| For Thread Size | For Max. Stroke Lg. | Push | Pull | Length | Height | Material | Each | |
| 1/4"-28 | 3" | 200 | 200 | 5 3/8" | 15 1/2" | Zinc-Plated Steel | 0000000 | 000000 |
Create-Your-Own Push/Pull Control Cables
Pair these cables with a knob or lever (not included) to operate valves, throttle controls, and HVAC damper controls from a distance. They're flexible for weaving around obstructions.
Clamp-mount cables have threaded fittings on both ends and a grooved body for mounting with strap clamps or U-bolts.
Panel-mount cables are also known as bulkhead mount cables. They have threaded fittings with hex nuts and washers at each end for mounting through a panel.
Thread | Dynamic Load Cap., lbs. | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Size | Lg. | O'all Lg., ft. | Max. Stroke Lg. | Push | Pull | Bend Radius | Temp. Range, °F | For Clamp Hole Dia. | Fitting Lg. | Each | |
Stainless Steel Cable Core with Plastic Cover | |||||||||||
| 10-32 | 7/8" | 3 | 2" | 50 | 50 | 8" | -40° to 210° | 7/16" | 6 1/2" | 0000000 | 000000 |
| 10-32 | 7/8" | 6 | 2" | 50 | 50 | 8" | -40° to 210° | 7/16" | 6 1/2" | 0000000 | 00000 |
Thread | Dynamic Load Cap., lbs. | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Size | Lg. | O'all Lg., ft. | Max. Stroke Lg. | Push | Pull | Bend Radius | Temp. Range, °F | For Panel Cutout Dia. | Fitting Lg. | Each | |
Stainless Steel Cable Core with Plastic Cover | |||||||||||
| 10-32 | 7/8" | 3 | 2" | 50 | 50 | 8" | -40° to 210° | 7/16" | 7 5/16" | 0000000 | 000000 |
| 10-32 | 7/8" | 6 | 2" | 50 | 50 | 8" | -40° to 210° | 7/16" | 7 5/16" | 0000000 | 00000 |
| For Thread Size | Material | Each | |
| 10-32 | Steel | 0000000 | 00000 |
| For Thread Size | Material | Each | |
| 10-32 | Zinc-Plated Carbon Steel | 0000000 | 00000 |
| For Thread Size | Material | Includes | Each | |
| 10-32 | Carbon Steel | Clevis Pin, Cotter Pin | 0000000 | 00000 |
Corrosion-Resistant Create-Your-Own
Push/Pull Control Cables
Well-suited for damp environments, these control cables have stainless steel fittings for excellent corrosion resistance. Pair them with a knob or lever (not included) to operate valves, throttle controls, and HVAC damper controls from a distance. They're flexible for weaving around obstructions.
Clamp-mount cables have threaded fittings on both ends and a grooved body for mounting with strap clamps or U-bolts.
Panel-mount cables are also known as bulkhead mount cables. They have threaded fittings with hex nuts and washers at each end for mounting through a panel.
Dynamic Load Cap., lbs. | ||||||||
|---|---|---|---|---|---|---|---|---|
| For Thread Size | For Max. Stroke Lg. | Push | Pull | Length | Height | Material | Each | |
| 1/4"-28 | 3" | 200 | 200 | 5 3/8" | 15 1/2" | Zinc-Plated Steel | 0000000 | 000000 |
Pull Control Cables
Similar to the brake cable on a bicycle, these cables exert pulling force so you can control components such as latches, release valves, and brakes. When you relax your pull, springs in your component pull the cable back. To connect these cables, anchor them on both ends through a panel or bulkhead using the included nuts. They have a steel core, but they’re flexible so you can weave them around obstacles and corners to connect to hard-to-reach components. Surrounding the cable is a plastic cover that stays in place as the cable slides through smoothly. The cover is durable and protects the cable from dirt and abrasion.
Once they’re connected, control these cables using a knob or handle. Some come with a knob attached, but add your own otherwise.
Cable | Thread | Knob | Panel-Mount Cables | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| OD | Core Dia. | Size | Lg. | O'all Lg., ft. | Max. Stroke Lg. | Dynamic Pull Load Cap., lbs. | Bend Radius | Material | Dia. | Temp. Range, °F | Mounting Hardware Included | For Panel Cutout Dia. | Fitting Lg. | Each | |
Steel Cable Core with Plastic Cover | |||||||||||||||
Without Knob | |||||||||||||||
| 0.31" | 0.080" | 10-32 | 3/4" | 5 | 2" | 350 | 6" | __ | __ | -65° to 225° | Yes | 27/64" | 7 1/4" | 00000000 | 000000 |
| 0.31" | 0.080" | 10-32 | 3/4" | 5 | 3" | 350 | 6" | __ | __ | -65° to 225° | Yes | 27/64" | 8 3/4" | 00000000 | 00000 |
| 0.31" | 0.080" | 10-32 | 3/4" | 10 | 2" | 350 | 6" | __ | __ | -65° to 225° | Yes | 27/64" | 7 1/4" | 00000000 | 00000 |
| 0.31" | 0.080" | 10-32 | 3/4" | 10 | 3" | 350 | 6" | __ | __ | -65° to 225° | Yes | 27/64" | 8 3/4" | 00000000 | 00000 |
| 0.44" | 0.093" | 1/4"-28 | 3/4" | 5 | 2" | 500 | 6" | __ | __ | -65° to 225° | Yes | 39/64" | 7 7/8" | 00000000 | 000000 |
| 0.44" | 0.093" | 1/4"-28 | 3/4" | 5 | 3" | 500 | 6" | __ | __ | -65° to 225° | Yes | 39/64" | 9 3/8" | 00000000 | 000000 |
| 0.44" | 0.093" | 1/4"-28 | 3/4" | 10 | 2" | 500 | 6" | __ | __ | -65° to 225° | Yes | 39/64" | 7 7/8" | 00000000 | 000000 |
| 0.44" | 0.093" | 1/4"-28 | 3/4" | 10 | 3" | 500 | 6" | __ | __ | -65° to 225° | Yes | 39/64" | 9 3/8" | 00000000 | 000000 |
With Knob | |||||||||||||||
| 0.44" | 0.125" | 1/4"-28 | 7/8" | 6 | 2" | 500 | 6" | Plastic | 2 1/2" | -65° to 225° | Yes | 39/64" | 9 1/8" | 00000000 | 00000 |
| 0.44" | 0.125" | 1/4"-28 | 7/8" | 10 | 3" | 500 | 6" | Plastic | 2 1/2" | -65° to 225° | Yes | 39/64" | 11 1/8" | 00000000 | 00000 |
Quick-Install Ball Joint Linkages
A spring-loaded sleeve allows for rapid assembly and disassembly. The stud is machined to fit perfectly inside its housing and swivel in all directions—good for light mechanical components and controls.
For technical drawings and 3-D models, click on a part number.
Shank | Ball Stud | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Thread Size | Center Lg. | Thread Lg. | Thread Size | Center Lg. | Lg. | Max. Ball Swivel | Static Radial Load Cap. | Material | Ball Stud Thread Direction | Each | |
Right-Hand Threaded Shank | |||||||||||
| 10-32 | 7/8" | 1/2" | 10-32 | 7/8" | 7/16" | 40° | Not Rated | Zinc-Plated Carbon Steel | Right Hand | 0000000 | 00000 |