Fasten these handles directly to the front of your surface to open and close a variety of doors and drawers, including those on furniture, machines, and equipment.

For applications that require a large gripping area, these handles have a center-to-center distance of 12" or more. Fasten them directly to the front of your surface to open and close a variety of doors and drawers, including those on furniture, machines, and equipment.

Cut the grip to the length you need before mounting. Fasten these handles directly to the front of your surface to open and close a variety of doors and drawers, including those on furniture, machines, and equipment.

Thread screws through holes from the back of your surface into the handles to open and close a variety of doors and drawers, including those on furniture, machines, and equipment.

For applications that require a large gripping area, these handles have a center-to-center distance of 12" or more. Thread screws through holes from the back of your surface into the handles to open and close a variety of doors and drawers on furniture, machines, and equipment.

Open and close a variety of doors and drawers on machines and equipment next to food processing lines while reducing the risk of contaminating the food. Thread screws through holes from the back of your surface into the handles to install them.

Fasten these handles directly to the front of your surface to open and close a variety of doors and drawers on chests, crates, furniture, machines, and equipment. Their grip folds out of the way when it's not in use.

Add or replace handles on drums and barrels. All of these handles have a curved mounting plate that sits flush against the surface and a folding grip that drops out of the way when you let go. Fasten them directly to the front of the surface.

Add or replace handles on drums and barrels. All of these handles have a curved mounting plate that sits flush against the surface and a folding grip that drops out of the way when you let go. They provide a stronger connection than those attached with screws or nuts.

Thread screws through holes from the back of your surface into the handles to install. These handles fit into a cutout, so they are flush with the mounting surface. Their grip drops out of the way when you let go. Use them to open and close a variety of doors and drawers on chests, crates, furniture, machines, and equipment.

These handles have a folding grip that drops out of the way when you let go. Insert studs into holes in your surface and secure from the backside to open and close a variety of doors and drawers on chests, crates, furniture, machines, and equipment.

Fasten these handles directly to the front of your surface to open and close a variety of doors and drawers, including those on furniture, machines, and equipment. They fit into a cutout, so they are flush with the mounting surface.

Designed to snap into a cutout, these handles are flush with the mounting surface. Use them to open and close a variety of doors and drawers, including those on furniture, machines, and equipment.

Insert studs into holes in your surface and fasten with locknuts from the backside to open and close a variety of doors and drawers, including those on furniture, machines, and equipment. These handles fit into a cutout, so they are flush with the mounting surface.

Thread screws through holes from the back of your surface into the handles to open and close a variety of doors and drawers, including those on furniture, machines, and equipment. The grip is offset from the mounting surface so there's room to fully grasp the handle.

Thread a screw through a hole from the back of your surface into the knobs to open and close a variety of doors and drawers, including those on furniture, machines, and equipment.

Thread these sanitary knobs into holes so you can open doors and drawers in hygienic environments.

With a sanitary design, these threaded-hole knobs are often to open and close doors and drawers on furniture, machines, and other equipment in pharmaceutical and food-processing facilities.

Use these handles as grips on hand wheels and cranks to operate machinery.

These handles are often used as grips on hand wheels or cranks to operate machinery around food processing lines without the risk of contaminating the food. Install them on a threaded stud.

Attach a ball knob to one of these shafts to create custom handles for operating machinery.

These handles are often used for operating machinery.

Also known as clamping handles, use these standard adjustable handles for applications involving frequent positioning, tightening, and holding adjustments. Lift the handle to rotate freely; then release the handle to engage and tighten.

A soft textured surface provides a comfortable grip for applications involving frequent positioning, tightening, and holding adjustments. Lift the handle to rotate freely; then release the handle to engage and tighten. These handles are also known as clamping handles.

These rugged steel handles provide lasting durability for applications involving frequent positioning, tightening, and holding adjustments in areas with limited vertical space. Lift the handle to rotate freely; then release the handle to engage and tighten. These handles are also known as clamping handles.

Prevent unintentional changes to equipment settings—when not in use, these handles are disengaged and turn freely. To change the position, push down on the handle and turn. When you release the handle, it disengages once again. These handles are also known as clamping handles.

Also known as double cams, these complete cam handles have a durable, extra-large handle for clamping on fixture bases, plates, and workpieces. For fast adjustments, push down on the handle and the head applies pressure to quickly draw two parts together.

Use these handles to keep holes aligned or lift several sheets of thin material. They have a plug that expands to grip the edges inside holes. They are not suitable for permanent installation—use only for temporary mounting.

Long straps allow you to carry bundles of boxes, lumber, pipe, and other objects that weigh up to 85 lbs.

With adhesive at both ends, these plastic strips stick to boxes, bags, and other objects to create a carrying handle.

These chain pulls are more durable than rope pulls to operate doors, vents, skylights, and overhead equipment.

Quickly identify equipment controls and components by their color. Use these knobs to control devices with round shafts and view settings at a glance with a pointer.

The domed top allows you to firmly hold these knobs in the palm of your hand to position, tighten, and hold fixtures, equipment, and machinery. Mount them into a threaded hole.

The domed top allows you to firmly hold these knobs in the palm of your hand to position, tighten, and hold fixtures, equipment, and machinery. Install these knobs on a threaded stud.

Square long shafts can pass through these handles for mounting versatility. Drill a hole in the side of the hub to secure with a set screw. These crank handles provide leverage to maximize force for turning and tightening. They are often used on cross-slide tables.

Balanced weight distribution prevents unintentional handle movement, even in high-vibration applications. Mill specific holes or keyways in the hub to meet your specifications or weld in place. Often used on cross-slide tables, these crank handles provide leverage to maximize force for turning and tightening.

A combination ratchet arm and revolving-grip crank handle makes frequent machinery adjustments in tight spaces fast and easy.

Use these latches with three-point locking systems, such as those on filing cabinet doors.

Also known as compression cam latches, these reach full compression when you lift the handle, turn it a quarter-turn, and then push it down for a secure hold.

These latches are IP65 rated for protection against dust, dirt, and washdowns.

Press the button and the handle snaps open; push the handle shut for a secure hold.

The mounting screws on these latches are concealed to prevent tampering.

Also known as compression cam latches, turn the handle a quarter-turn to latch, then another quarter-turn to draw the cam firmly against the door or drawer surface.

These tight-hold latches are IP65 and NEMA 4 rated for protection against dust, dirt, and washdowns. Press the button and the handle snaps open; push the handle shut for a secure hold.

Designed for food-processing and hygienic applications, these corrosion-resistant latches are DGUV tested to meet European regulations for use with food.

Designed for use in 1/2" dia. through holes.

With a flat inset grip, the handle is recessed to stay out of the way.

These locks are IP65 rated for protection against dust, dirt, and washdowns.

Also known as compression cam locks, turn the handle a quarter-turn to latch, then another quarter-turn to draw the cam firmly against the door or drawer surface.

In addition to an IP65 rating for washdown environments, these locks have a squeeze-release handle to prevent accidental opening when unlocked.

Fold the ring handle into the recess to stay out of the way when not in use.

Open these locks with both a master key and their own unique key.

The mounting screws on these locks are concealed to prevent tampering.

Open multiple locks with the same key.

The mounting screws on these locks are concealed to prevent tampering.

The mounting screws on these locks are concealed to prevent tampering.

Also known as compression cam locks, these reach full compression when you lift the handle, turn it a quarter-turn, and then push it down for a secure hold.

Raise the handle and it swings smoothly for easy latching and unlatching.

These padlockable latches are IP65 rated for protection against dust, dirt, and washdowns.

Also known as paddle latches, these are often used on electrical panels, cabinets, and lockers.

Their spring-loaded design withstands vibration, rattling, and shaking better than other face-mount push-to-close latches for a more secure hold.

Mount these padlockable latches horizontally to the face of doors on refrigerators, ovens, and industrial enclosures with the strike plate mounted on the frame.

Operate these padlockable latches from either side of the door—there is a handle on both sides.

Also known as paddle locks, these are often used on electrical panels, cabinets, and lockers.

An emergency release handle offers a means of escape if the door closes with someone inside an enclosure. Mount these locks horizontally to the face of doors on refrigerators and industrial enclosures with the strike plate mounted on the frame.

To open these latches, push in the knob and pull the tab.

These latches are typically used to secure hoods and covers.

Use these latches alone for single-point latching, or add latch kits for more holding power.

A paddle handle activates the top and bottom spring-loaded latching points to secure large cabinet doors.

Choose these locks if you need locks that each open with a different key.