Gates Powergrip GT2 Pulleys

Filter by

System of Measurement

Inch

Metric

For Maximum Belt Width

Number of Teeth

Shaft Diameter

Pitch

Belt Trade Size

Manufacturer Equivalent Series

Tooth Profile

Bore Type

Width

Pitch Diameter

Pulley Type

Idler Type

Shaft Mount Type

Shaft Type

Number of Flanges

Material

Hub Type

RoHS

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

REACH

Compliant

Not Compliant

DFARS Specialty Metals

Exempt

Export Control Classification Number (ECCN)

EAR99

Forward

How can we improve?

337 Products

Precision High-Torque GT Timing Belt Pulleys

Finished Bore

Bushing Bore

When precise synchronization is crucial, these pulleys minimize play (backlash). They’re often found in 3D printers, where accurate positioning is essential. Their curved teeth fit snugly with matching belts. Compared to pulleys with standard trapezoidal teeth, these pulleys transmit about three times more torque and run at higher speeds. All are compatible with Gates PowerGrip GT, 2GT, GT2, GT3, and GT4 series.

Iron—Strong but best for dry environments since moisture will cause them to rust.

Corrosion-Resistant Aluminum—Won't rust in wet environments and one-third the weight of steel and iron. However, aluminum pulleys are not as strong as iron and steel.

Finished Bore—Mount these pulleys onto the shaft and secure with a set screw—no machining required.

Bushing Bore—Quickly swap or service parts in tight spaces—no press-fitting or special tools required. Mount a bushing (sold separately) on your shaft and slide the pulley over it. As you tighten the included set screws, the bushing grips the shaft and draws it into the pulley, creating a final hold that is more secure than with set screws alone.

						For Bushing
	For Max. Belt Wd., mm	Pitch, mm	No. of Teeth	Bore Type	For Shaft Dia.	Type	Trade No.	Pitch Dia., mm	No. of Flanges	Hub Type		Each
For 2MGT Trade Size







				Corrosion-Resistant Aluminum

				6	2	12	Finished	1/8"	—	—	7.6	1	Standard	3764N101	000000


				6	2	14	Finished	1/8"	—	—	8.9	1	Standard	3764N102	00000
				6	2	15	Finished	3/16"	—	—	9.6	1	Standard	3764N103	00000
				6	2	16	Finished	3/16"	—	—	10.2	1	Standard	3764N104	00000
				6	2	16	Finished	5 mm	—	—	9.7	1	Standard	3684N11	0000
				6	2	17	Finished	1/4"	—	—	10.8	1	Standard	3764N105	00000
				6	2	18	Finished	1/4"	—	—	11.5	1	Standard	3764N106	00000
				6	2	20	Finished	1/4"	—	—	12.7	1	Standard	3764N107	00000
				6	2	20	Finished	5 mm	—	—	12.2	1	Standard	3684N12	0000
				6	2	24	Finished	1/4"	—	—	15.3	2	Standard	3764N108	00000
				6	2	26	Finished	1/4"	—	—	16.6	2	Standard	3764N109	00000


				6	2	28	Finished	1/4"	—	—	17.8	2	Standard	3764N11	00000
				6	2	32	Finished	1/4"	—	—	20.4	2	Standard	3764N112	00000
				6	2	36	Finished	1/4"	—	—	22.9	2	Standard	3764N113	00000
				6	2	40	Finished	1/4"	—	—	25.5	2	Standard	3764N114	00000
				6	2	48	Finished	1/4"	—	—	30.6	2	Standard	3764N116	00000
				6	2	50	Finished	1/4"	—	—	31.8	2	Standard	3764N117	00000
				6	2	60	Finished	1/4"	—	—	38.2	2	Standard	3764N118	00000
				6	2	72	Finished	1/4"	—	—	45.8	—	Standard	3764N119	00000
				6	2	100	Finished	5/16"	—	—	63.7	—	Standard	3764N122	00000
				6	2	120	Finished	3/8"	—	—	76.4	—	Standard	3764N123	00000


				9	2	20	Finished	5 mm	—	—	12.2	1	Standard	3684N13	0000
				12	2	20	Finished	5 mm	—	—	12.2	1	Standard	3684N14	0000


				For 3MGT Trade Size







								Corrosion-Resistant Aluminum

								9	3	16	Finished	3/16"	—	—	15.3	1	Standard	3764N124	00000


								9	3	16	Finished	1/4"	—	—	15.3	1	Standard	3764N125	00000
								9	3	17	Finished	1/4"	—	—	16.2	1	Standard	3764N126	00000
								9	3	18	Finished	1/4"	—	—	17.2	2	Standard	3764N127	00000
								9	3	20	Finished	1/4"	—	—	19.1	2	Standard	3764N128	00000
								9	3	22	Finished	1/4"	—	—	21	2	Standard	3764N129	00000
								9	3	24	Finished	1/4"	—	—	22.9	2	Standard	3764N13	00000
								9	3	25	Finished	1/4"	—	—	23.9	2	Standard	3764N131	00000
								9	3	26	Finished	1/4"	—	—	24.8	2	Standard	3764N132	00000
								9	3	28	Finished	1/4"	—	—	26.7	2	Standard	3764N133	00000
								9	3	30	Finished	1/4"	—	—	28.7	2	Standard	3764N134	00000


9	3							32	Finished	1/4"	—	—	30.6	2	Standard	3764N135	00000
9	3							34	Finished	1/4"	—	—	32.5	2	Standard	3764N136	00000
9	3							36	Finished	1/4"	—	—	34.4	2	Standard	3764N137	00000
9	3							40	Finished	1/4"	—	—	38.2	2	Standard	3764N139	00000
9	3	44						Finished	1/4"	—	—	42	2	Standard	3764N14	00000
9	3	45	Finished					1/4"	—	—	43	2	Standard	3764N141	00000
9	3	48	Finished					5/16"	—	—	45.8	—	Standard	3764N142	00000
9	3	50	Finished					5/16"	—	—	47.8	—	Standard	3764N143	00000
9	3	56	Finished					5/16"	—	—	53.5	—	Standard	3764N144	00000
9	3	60	Finished					5/16"	—	—	57.3	—	Standard	3764N145	00000


9	3	72	Finished					5/16"	—	—	68.8	—	Standard	3764N147	00000
9	3	80	Finished					5/16"	—	—	76.4	—	Standard	3764N148	00000
9	3	90	Finished					5/16"	—	—	86	—	Standard	3764N149	00000
9	3	100	Finished					5/16"	—	—	95.5	—	Standard	3764N15	00000
9	3	120	Finished					5/16"	—	—	114.6	—	Standard	3764N151	00000


For 14MGT Trade Size







								Iron

								40	14	28	Bushing	—	Taper Lock	2012	124.8	2	—	3764N152	000000


								40	14	46	Bushing	—	Taper Lock	2517	205	2	—	3764N167	000000
								40	14	72	Bushing	—	Taper Lock	3020	320.9	2	—	3764N175	000000

Bushings

Taper-Lock

Bushing

Bushing
Type	Trade No.	For Shaft Dia.		Each
Taper Lock	2012	1/2"	57095K181	000000
Taper Lock	2012	5/8"	57095K294	00000
Taper Lock	2012	3/4"	57095K182	00000
Taper Lock	2012	7/8"	57095K295	00000
Taper Lock	2012	15/16"	57095K545	00000
Taper Lock	2012	1"	57095K183	00000
Taper Lock	2012	1 1/8"	57095K184	00000
Taper Lock	2012	1 3/16"	57095K199	00000
Taper Lock	2012	1 1/4"	57095K185	00000
Taper Lock	2012	1 3/8"	57095K186	00000
Taper Lock	2012	1 7/16"	57095K187	00000
Taper Lock	2012	1 1/2"	57095K188	00000
Taper Lock	2012	1 9/16"	57095K542	00000
Taper Lock	2012	1 5/8"	57095K189	00000
Taper Lock	2012	1 11/16"	57095K538	00000
Taper Lock	2012	1 3/4"	57095K191	00000
Taper Lock	2012	1 7/8"	57095K192	00000
Taper Lock	2012	1 15/16"	57095K313	00000
Taper Lock	2012	2"	57095K193	00000
Taper Lock	2012	2 1/8"	57095K196	000000
Taper Lock	2012	20 mm	57095K548	00000
Taper Lock	2012	22 mm	57095K549	00000
Taper Lock	2012	24 mm	57095K551	00000
Taper Lock	2012	25 mm	57095K552	00000
Taper Lock	2012	28 mm	57095K553	00000
Taper Lock	2012	30 mm	57095K554	00000
Taper Lock	2012	32 mm	57095K555	00000
Taper Lock	2012	35 mm	57095K556	00000
Taper Lock	2012	38 mm	57095K557	00000
Taper Lock	2012	40 mm	57095K558	00000
Taper Lock	2012	42 mm	57095K559	00000
Taper Lock	2012	45 mm	57095K561	00000
Taper Lock	2012	50 mm	57095K563	00000
Taper Lock	2517	3/4"	57095K224	00000
Taper Lock	2517	7/8"	57095K225	00000
Taper Lock	2517	1"	57095K211	00000
Taper Lock	2517	1 1/8"	57095K226	00000
Taper Lock	2517	1 3/16"	57095K232	00000
Taper Lock	2517	1 1/4"	57095K227	00000
Taper Lock	2517	1 5/16"	57095K233	00000
Taper Lock	2517	1 3/8"	57095K212	00000
Taper Lock	2517	1 7/16"	57095K234	00000
Taper Lock	2517	1 1/2"	57095K213	00000
Taper Lock	2517	1 5/8"	57095K214	00000
Taper Lock	2517	1 11/16"	57095K235	00000
Taper Lock	2517	1 3/4"	57095K215	00000
Taper Lock	2517	1 13/16"	57095K566	00000
Taper Lock	2517	1 7/8"	57095K228	00000
Taper Lock	2517	1 15/16"	57095K236	00000
Taper Lock	2517	2"	57095K216	00000
Taper Lock	2517	2 1/8"	57095K217	00000
Taper Lock	2517	2 3/16"	57095K237	00000
Taper Lock	2517	2 1/4"	57095K218	00000
Taper Lock	2517	2 3/8"	57095K219	00000
Taper Lock	2517	2 7/16"	57095K238	00000
Taper Lock	2517	2 1/2"	57095K221	00000
Taper Lock	2517	2 5/8"	57095K229	000000
Taper Lock	2517	2 11/16"	57095K231	000000
Taper Lock	2517	24 mm	57095K578	00000
Taper Lock	2517	25 mm	57095K579	00000
Taper Lock	2517	30 mm	57095K582	00000
Taper Lock	2517	32 mm	57095K583	00000
Taper Lock	2517	35 mm	57095K584	00000
Taper Lock	2517	38 mm	57095K585	00000
Taper Lock	2517	40 mm	57095K586	00000
Taper Lock	2517	42 mm	57095K587	00000
Taper Lock	2517	45 mm	57095K588	00000
Taper Lock	2517	48 mm	57095K589	00000
Taper Lock	2517	50 mm	57095K591	00000
Taper Lock	3020	1"	57095K314	00000
Taper Lock	3020	1 1/8"	57095K318	00000
Taper Lock	3020	1 1/4"	57095K317	00000
Taper Lock	3020	1 3/8"	57095K325	00000
Taper Lock	3020	1 7/16"	57095K328	00000
Taper Lock	3020	1 1/2"	57095K316	00000
Taper Lock	3020	1 5/8"	57095K327	00000
Taper Lock	3020	1 3/4"	57095K324	00000
Taper Lock	3020	1 7/8"	57095K329	00000
Taper Lock	3020	1 15/16"	57095K322	00000
Taper Lock	3020	2"	57095K333	00000
Taper Lock	3020	2 1/8"	57095K337	00000
Taper Lock	3020	2 3/8"	57095K344	00000
Taper Lock	3020	2 7/16"	57095K347	00000
Taper Lock	3020	2 1/2"	57095K335	00000
Taper Lock	3020	2 3/4"	57095K343	00000
Taper Lock	3020	2 7/8"	57095K348	00000
Taper Lock	3020	2 15/16"	57095K341	00000
Taper Lock	3020	3"	57095K352	00000
Taper Lock	3020	40 mm	57095K357	00000
Taper Lock	3020	48 mm	57095K361	00000
Taper Lock	3020	55 mm	57095K363	00000

GT Timing Belt Idler Pulleys

Toothed

Without Teeth

Get pitch-perfect compatibility with these free-spinning pulleys. They mesh with belts that have curved GT-profile teeth, reducing vibration and wear. As they rotate on their bearings, these pulleys press up against belts to reduce slack and keep the system moving smoothly. All are compatible with GatesPowerGrip GT, 2GT, GT2, GT3, and GT4 series. Idler pulleys are often used with belt tensioners.

Iron—Strong, but best for dry environments since moisture will cause them to rust.

Corrosion-Resistant Aluminum—Lightweight and resist rust in wet environments. Although aluminum pulleys are one-third the weight of iron pulleys, they aren't as strong.

Without Teeth—These pulleys press against the smooth side of the belt instead of the toothed side to maintain tension.

						Toothed			Without Teeth
	For Max. Belt Wd., mm	Pitch, mm	For Shaft Dia., mm	OD, mm	Bearing Type	No. of Teeth		Each		Each
For 2MGT Trade Size







				Corrosion-Resistant Aluminum

				6	2	3	15	Ball	20	3693N211	00000	3693N214	00000


				6	2	5	15	Ball	20	3693N11	0000	3693N14	0000
				9	2	3	15	Ball	20	3693N212	0000	3693N215	0000
				9	2	5	15	Ball	20	3693N12	0000	3693N15	0000
				12	2	3	15	Ball	20	3693N213	0000	3693N216	0000
				12	2	5	15	Ball	20	3693N13	0000	3693N16	0000


				For 8MGT Trade Size







								Iron

								20	8	20	90	Roller	32	7769N21	000000	———	0


								30	8	30	100	Roller	36	7769N22	000000	———	0
								62	8	30	100	Roller	36	7769N28	000000	———	0


								For 14MGT Trade Size







												Iron

												37	14	40	146	Roller	30	7769N31	000000	———	0

Precision High-Torque GT Timing Belts

When precision timing is crucial, these timing belts minimize play (backlash). They’re often found in 3D printers, where accurate positioning is essential. Their curved teeth fit snugly with matching pulleys. Compared to belts with standard trapezoidal teeth, these belts transmit about three times more torque and run at higher speeds. All are compatible with Gates PowerGrip GT, 2GT, GT2, GT3, and GT4 series.

Neoprene—Durable and weather resistant, but lose elasticity if exposed to oil and fuel. These belts are reinforced, so they're strong enough to transmit power without stretching. Plus, nylon-coated teeth minimize friction and protect the surface from wear.

	Wd., mm	Outer Circle, mm	No. of Teeth	Pitch, mm	Reinforcement Material	Tooth Finish	Temp. Range, ° F		Each
Neoprene







				2MGT Trade Size

				6	100	50	2	Fiberglass	Nylon Coated	-30 to 180	7947K711	00000


				6	112	56	2	Fiberglass	Nylon Coated	-30 to 180	7947K712	0000
				6	124	62	2	Fiberglass	Nylon Coated	-30 to 180	7947K713	0000
				6	126	63	2	Fiberglass	Nylon Coated	-30 to 180	7947K714	0000
				6	134	67	2	Fiberglass	Nylon Coated	-30 to 180	7947K715	0000
				6	136	68	2	Fiberglass	Nylon Coated	-30 to 180	7947K716	0000
				6	140	70	2	Fiberglass	Nylon Coated	-30 to 180	7947K717	0000
				6	152	76	2	Fiberglass	Nylon Coated	-30 to 180	7947K718	0000
				6	158	79	2	Fiberglass	Nylon Coated	-30 to 180	7947K719	0000
				6	160	80	2	Fiberglass	Nylon Coated	-30 to 180	7947K721	0000
				6	164	82	2	Fiberglass	Nylon Coated	-30 to 180	7947K722	0000


				6	172	86	2	Fiberglass	Nylon Coated	-30 to 180	7947K725	0000
				6	180	90	2	Fiberglass	Nylon Coated	-30 to 180	7947K726	0000
				6	186	93	2	Fiberglass	Nylon Coated	-30 to 180	7947K727	0000
				6	192	96	2	Fiberglass	Nylon Coated	-30 to 180	7947K728	0000
				6	200	100	2	Fiberglass	Nylon Coated	-30 to 180	7947K729	0000
				6	202	101	2	Fiberglass	Nylon Coated	-30 to 180	7947K731	0000
				6	212	106	2	Fiberglass	Nylon Coated	-30 to 180	7947K732	0000
				6	220	110	2	Fiberglass	Nylon Coated	-30 to 180	7947K733	0000
				6	232	116	2	Fiberglass	Nylon Coated	-30 to 180	7947K734	0000
				6	236	118	2	Fiberglass	Nylon Coated	-30 to 180	7947K735	0000


				6	240	120	2	Fiberglass	Nylon Coated	-30 to 180	7947K736	0000
				6	250	125	2	Fiberglass	Nylon Coated	-30 to 180	7947K737	0000
				6	252	126	2	Fiberglass	Nylon Coated	-30 to 180	7947K738	0000
				6	258	129	2	Fiberglass	Nylon Coated	-30 to 180	7947K739	0000
				6	280	140	2	Fiberglass	Nylon Coated	-30 to 180	7947K741	0000
				6	300	150	2	Fiberglass	Nylon Coated	-30 to 180	7947K742	0000
				6	320	160	2	Fiberglass	Nylon Coated	-30 to 180	7947K743	0000
				6	332	166	2	Fiberglass	Nylon Coated	-30 to 180	7947K744	0000
				6	350	175	2	Fiberglass	Nylon Coated	-30 to 180	7947K745	0000
				6	370	185	2	Fiberglass	Nylon Coated	-30 to 180	7947K746	0000


				6	380	190	2	Fiberglass	Nylon Coated	-30 to 180	7947K747	0000
				6	400	200	2	Fiberglass	Nylon Coated	-30 to 180	7947K748	0000
				6	420	210	2	Fiberglass	Nylon Coated	-30 to 180	7947K749	0000
				6	456	228	2	Fiberglass	Nylon Coated	-30 to 180	7947K751	0000
				6	488	244	2	Fiberglass	Nylon Coated	-30 to 180	7947K753	0000
				6	504	252	2	Fiberglass	Nylon Coated	-30 to 180	7947K754	0000
				6	528	264	2	Fiberglass	Nylon Coated	-30 to 180	7947K755	0000
				6	552	276	2	Fiberglass	Nylon Coated	-30 to 180	7947K756	00000
				6	576	288	2	Fiberglass	Nylon Coated	-30 to 180	7947K757	00000
				6	600	300	2	Fiberglass	Nylon Coated	-30 to 180	7947K758	00000


				6	640	320	2	Fiberglass	Nylon Coated	-30 to 180	7947K759	00000
				6	696	348	2	Fiberglass	Nylon Coated	-30 to 180	7947K761	00000
				6	744	372	2	Fiberglass	Nylon Coated	-30 to 180	7947K762	00000
				6	848	424	2	Fiberglass	Nylon Coated	-30 to 180	7947K763	00000
6				1,164	582	2	Fiberglass	Nylon Coated	-30 to 180	7947K764	00000




		3MGT Trade Size

		9	99	33	3	Fiberglass	Nylon Coated	-30 to 180	7947K765	0000


		9	123	41	3	Fiberglass	Nylon Coated	-30 to 180	7947K767	0000
		9	165	55	3	Fiberglass	Nylon Coated	-30 to 180	7947K769	00000
		9	180	60	3	Fiberglass	Nylon Coated	-30 to 180	7947K771	00000
		9	183	61	3	Fiberglass	Nylon Coated	-30 to 180	7947K772	00000
		9	189	63	3	Fiberglass	Nylon Coated	-30 to 180	7947K773	00000
		9	201	67	3	Fiberglass	Nylon Coated	-30 to 180	7947K774	00000
		9	219	73	3	Fiberglass	Nylon Coated	-30 to 180	7947K775	00000
		9	225	75	3	Fiberglass	Nylon Coated	-30 to 180	7947K776	00000
		9	240	80	3	Fiberglass	Nylon Coated	-30 to 180	7947K777	00000
		9	243	81	3	Fiberglass	Nylon Coated	-30 to 180	7947K778	00000


		9	255	85	3	Fiberglass	Nylon Coated	-30 to 180	7947K779	00000
		9	267	89	3	Fiberglass	Nylon Coated	-30 to 180	7947K781	00000
		9	282	94	3	Fiberglass	Nylon Coated	-30 to 180	7947K782	00000
		9	291	97	3	Fiberglass	Nylon Coated	-30 to 180	7947K783	00000
		9	300	100	3	Fiberglass	Nylon Coated	-30 to 180	7947K784	00000
		9	339	113	3	Fiberglass	Nylon Coated	-30 to 180	7947K785	00000
		9	348	116	3	Fiberglass	Nylon Coated	-30 to 180	7947K786	00000
		9	357	119	3	Fiberglass	Nylon Coated	-30 to 180	7947K787	00000
		9	360	120	3	Fiberglass	Nylon Coated	-30 to 180	7947K788	00000
		9	375	125	3	Fiberglass	Nylon Coated	-30 to 180	7947K789	00000


		9	393	131	3	Fiberglass	Nylon Coated	-30 to 180	7947K791	00000
		9	414	138	3	Fiberglass	Nylon Coated	-30 to 180	7947K792	00000
		9	420	140	3	Fiberglass	Nylon Coated	-30 to 180	7947K793	00000
		9	450	150	3	Fiberglass	Nylon Coated	-30 to 180	7947K795	00000
		9	474	158	3	Fiberglass	Nylon Coated	-30 to 180	7947K796	00000
		9	480	160	3	Fiberglass	Nylon Coated	-30 to 180	7947K797	00000
		9	483	161	3	Fiberglass	Nylon Coated	-30 to 180	7947K798	00000
		9	504	168	3	Fiberglass	Nylon Coated	-30 to 180	7947K811	00000
		9	537	179	3	Fiberglass	Nylon Coated	-30 to 180	7947K812	00000
		9	552	184	3	Fiberglass	Nylon Coated	-30 to 180	7947K813	00000


		9	564	188	3	Fiberglass	Nylon Coated	-30 to 180	7947K814	00000
		9	600	200	3	Fiberglass	Nylon Coated	-30 to 180	7947K815	00000
		9	630	210	3	Fiberglass	Nylon Coated	-30 to 180	7947K816	00000
		9	684	228	3	Fiberglass	Nylon Coated	-30 to 180	7947K817	00000
		9	735	245	3	Fiberglass	Nylon Coated	-30 to 180	7947K818	00000
		9	840	280	3	Fiberglass	Nylon Coated	-30 to 180	7947K822	00000
		9	945	315	3	Fiberglass	Nylon Coated	-30 to 180	7947K823	00000
		9	1,050	350	3	Fiberglass	Nylon Coated	-30 to 180	7947K824	00000
		9	1,080	360	3	Fiberglass	Nylon Coated	-30 to 180	7947K825	00000
		9	1,536	512	3	Fiberglass	Nylon Coated	-30 to 180	7947K826	00000


		9	2,061	687	3	Fiberglass	Nylon Coated	-30 to 180	7947K828	00000




				8MGT Trade Size

				20	480	60	8	Fiberglass	Nylon Coated	-22 to 212	6486K111	00000


20	560			70	8	Fiberglass	Nylon Coated	-22 to 212	6486K112	00000
20	600			75	8	Fiberglass	Nylon Coated	-22 to 212	6486K113	00000
20	640			80	8	Fiberglass	Nylon Coated	-22 to 212	6486K114	00000
20	720			90	8	Fiberglass	Nylon Coated	-22 to 212	6486K115	00000
20	800			100	8	Fiberglass	Nylon Coated	-22 to 212	6486K116	00000
20	840			105	8	Fiberglass	Nylon Coated	-22 to 212	6486K61	00000
20	880			110	8	Fiberglass	Nylon Coated	-22 to 212	6486K117	00000
20	920			115	8	Fiberglass	Nylon Coated	-22 to 212	6486K631	00000
20	960			120	8	Fiberglass	Nylon Coated	-22 to 212	6486K118	00000
20	1,040			130	8	Fiberglass	Nylon Coated	-22 to 212	6486K119	00000


20	1,064			133	8	Fiberglass	Nylon Coated	-22 to 212	6486K632	00000
20	1,120			140	8	Fiberglass	Nylon Coated	-22 to 212	6486K12	00000
20	1,160			145	8	Fiberglass	Nylon Coated	-22 to 212	6486K633	00000
20	1,200			150	8	Fiberglass	Nylon Coated	-22 to 212	6486K121	00000
20	1,224			153	8	Fiberglass	Nylon Coated	-22 to 212	6486K634	00000
20	1,280			160	8	Fiberglass	Nylon Coated	-22 to 212	6486K122	00000
20	1,440			180	8	Fiberglass	Nylon Coated	-22 to 212	6486K635	00000
20	1,512			189	8	Fiberglass	Nylon Coated	-22 to 212	6486K636	00000
20	1,584			198	8	Fiberglass	Nylon Coated	-22 to 212	6486K637	00000
20	1,600			200	8	Fiberglass	Nylon Coated	-22 to 212	6486K638	00000


20	1,760			220	8	Fiberglass	Nylon Coated	-22 to 212	6486K125	00000
20	1,800			225	8	Fiberglass	Nylon Coated	-22 to 212	6486K126	00000
20	2,000			250	8	Fiberglass	Nylon Coated	-22 to 212	6486K127	000000
20	2,200			275	8	Fiberglass	Nylon Coated	-22 to 212	6486K64	000000
20	2,400			300	8	Fiberglass	Nylon Coated	-22 to 212	6486K641	000000
20	2,600			325	8	Fiberglass	Nylon Coated	-22 to 212	6486K642	000000
20	2,800			350	8	Fiberglass	Nylon Coated	-22 to 212	6486K643	000000
20	3,280			410	8	Fiberglass	Nylon Coated	-22 to 212	6486K644	000000
20	3,600			450	8	Fiberglass	Nylon Coated	-22 to 212	6486K134	000000
20	4,400			550	8	Fiberglass	Nylon Coated	-22 to 212	6486K135	000000


30	480			60	8	Fiberglass	Nylon Coated	-22 to 212	6486K211	00000
30	560			70	8	Fiberglass	Nylon Coated	-22 to 212	6486K212	00000
30	600			75	8	Fiberglass	Nylon Coated	-22 to 212	6486K213	00000
30	640			80	8	Fiberglass	Nylon Coated	-22 to 212	6486K214	00000
30	720			90	8	Fiberglass	Nylon Coated	-22 to 212	6486K215	00000
30	800			100	8	Fiberglass	Nylon Coated	-22 to 212	6486K216	00000
30	840			105	8	Fiberglass	Nylon Coated	-22 to 212	6486K645	00000
30	880			110	8	Fiberglass	Nylon Coated	-22 to 212	6486K217	00000
30	920			115	8	Fiberglass	Nylon Coated	-22 to 212	6486K646	00000
30	960			120	8	Fiberglass	Nylon Coated	-22 to 212	6486K218	00000


30	1,040			130	8	Fiberglass	Nylon Coated	-22 to 212	6486K219	00000
30	1,064			133	8	Fiberglass	Nylon Coated	-22 to 212	6486K647	00000
30	1,120			140	8	Fiberglass	Nylon Coated	-22 to 212	6486K22	00000
30	1,160			145	8	Fiberglass	Nylon Coated	-22 to 212	6486K648	000000
30	1,200			150	8	Fiberglass	Nylon Coated	-22 to 212	6486K221	00000
30	1,224			153	8	Fiberglass	Nylon Coated	-22 to 212	6486K649	000000
30	1,280			160	8	Fiberglass	Nylon Coated	-22 to 212	6486K222	00000
30	1,440			180	8	Fiberglass	Nylon Coated	-22 to 212	6486K223	000000
30	1,512			189	8	Fiberglass	Nylon Coated	-22 to 212	6486K65	000000
30	1,584	198		8	Fiberglass	Nylon Coated	-22 to 212	6486K651	000000
30	1,600	200	8	Fiberglass	Nylon Coated	-22 to 212	6486K224	000000
30	1,760	220	8	Fiberglass	Nylon Coated	-22 to 212	6486K225	000000
30	1,800	225	8	Fiberglass	Nylon Coated	-22 to 212	6486K652	000000
30	2,000	250	8	Fiberglass	Nylon Coated	-22 to 212	6486K227	000000
30	2,200	275	8	Fiberglass	Nylon Coated	-22 to 212	6486K653	000000
30	2,400	300	8	Fiberglass	Nylon Coated	-22 to 212	6486K654	000000
30	2,600	325	8	Fiberglass	Nylon Coated	-22 to 212	6486K655	000000
30	2,800	350	8	Fiberglass	Nylon Coated	-22 to 212	6486K656	000000
30	3,280	410	8	Fiberglass	Nylon Coated	-22 to 212	6486K657	000000
50	720	90	8	Fiberglass	Nylon Coated	-22 to 212	6486K315	000000
50	800	100	8	Fiberglass	Nylon Coated	-22 to 212	6486K316	000000
50	880	110	8	Fiberglass	Nylon Coated	-22 to 212	6486K317	000000
50	920	115	8	Fiberglass	Nylon Coated	-22 to 212	6486K659	000000
50	960	120	8	Fiberglass	Nylon Coated	-22 to 212	6486K318	000000
50	1,040	130	8	Fiberglass	Nylon Coated	-22 to 212	6486K319	000000
50	1,064	133	8	Fiberglass	Nylon Coated	-22 to 212	6486K67	000000
50	1,120	140	8	Fiberglass	Nylon Coated	-22 to 212	6486K32	000000
50	1,160	145	8	Fiberglass	Nylon Coated	-22 to 212	6486K671	000000
50	1,200	150	8	Fiberglass	Nylon Coated	-22 to 212	6486K321	000000
50	1,224	153	8	Fiberglass	Nylon Coated	-22 to 212	6486K672	000000
50	1,280	160	8	Fiberglass	Nylon Coated	-22 to 212	6486K322	000000
50	1,440	180	8	Fiberglass	Nylon Coated	-22 to 212	6486K673	000000
50	1,512	189	8	Fiberglass	Nylon Coated	-22 to 212	6486K674	000000
50	1,584	198	8	Fiberglass	Nylon Coated	-22 to 212	6486K675	000000
50	1,600	200	8	Fiberglass	Nylon Coated	-22 to 212	6486K324	000000
50	1,760	220	8	Fiberglass	Nylon Coated	-22 to 212	6486K325	000000
50	1,800	225	8	Fiberglass	Nylon Coated	-22 to 212	6486K326	000000
50	2,000	250	8	Fiberglass	Nylon Coated	-22 to 212	6486K327	000000
50	2,200	275	8	Fiberglass	Nylon Coated	-22 to 212	6486K676	000000
50	2,400	300	8	Fiberglass	Nylon Coated	-22 to 212	6486K677	000000
50	2,600	325	8	Fiberglass	Nylon Coated	-22 to 212	6486K678	000000
50	3,280	410	8	Fiberglass	Nylon Coated	-22 to 212	6486K68	000000



		14MGT Trade Size

		40	1,190	85	14	Fiberglass	Nylon Coated	-30 to 180	7947K829	000000


		40	1,400	100	14	Fiberglass	Nylon Coated	-30 to 180	7947K831	000000
		55	2,100	150	14	Fiberglass	Nylon Coated	-30 to 180	7947K852	000000
		55	4,578	327	14	Fiberglass	Nylon Coated	-30 to 180	7947K861	00000000

Precision High-Torque GT Cut-to-Length Timing Belts

Best for custom setups that demand powerful, controlled motion. Use these timing belts for linear applications or join the ends to create a custom belt. Their curved teeth fit snugly with matching pulleys to minimize play (backlash). That means these belts respond precisely to starts and stops, making them ideal for applications such as 3D printers. Compared to belts with trapezoidal teeth, these belts transmit about three times as much torque and run at higher speeds. All are compatible with Gates PowerGrip GT, 2GT, GT2, GT3, and GT4 series.

	Tooth Finish	Temp. Range, ° F		500 mm Long	1,000 mm Long	2,000 mm Long	3,000 mm Long
Neoprene







	2MGT Trade Size

	6	2	Fiberglass	Nylon Coated	-22 to 212	3682N1	00000	000000	000000	000000


	9	2	Fiberglass	Nylon Coated	-22 to 212	3682N2	0000	00000	00000	00000
	12	2	Fiberglass	Nylon Coated	-22 to 212	3682N3	00000	00000	00000	00000