McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    38 Products

    Face-Grip Gear and Bearing Pullers

    Install and remove bearings, pulleys, sprockets, and other press-fit parts with tapered holes. Face-grip pullers can be used with Bearing Separators and V-Belt Pulley Separators (not included). Select a separator with a thread size that matches the leg thread size of your face-grip puller.
    Legs and replacement legs (both sold separately) come in pairs. Choose from the legs to change the reach of your face-grip puller.
    Two Jaws with Tips on One End
    Image of Product. Front orientation. Gear and Bearing Pullers. Face-Grip Gear and Bearing Pullers .
    Pullers
    Replacement Legs
    Forcing Screw
    Fasteners
    For OD
    Reach
    Lg.
    Wt. Cap.,
    ton
    Puller
    Material
    Material
    Overall
    Lg.
    Thread Size
    Pipe
    Size
    Leg Thread
    Size
    Req.
    Included
    End Cap
    Lg.
    Includes
    Each
    Pair
    1 1/4" to 4 1/2"5 7/8"3SteelSteel6 1/8"M12 × 1.5 mm—M10 × 1.5 mmNoNo—Forcing Screw00000000000000———0
    2 1/4" to 7 1/4"6 3/4"10SteelSteel12"3/4"-16
    		—5/8"-18
    		NoNo1 1/2"Forcing Screw0000000000000000000000000000
    2 1/2" to 5 3/4"7 7/8"5 1/2SteelSteel8"M18 × 1.5 mm—M10 × 1.5 mmNoNo—Forcing Screw0000000000000———0
    2 3/4" to 9 1/2"10 1/4"7 1/2SteelSteel7 1/2"1/2"-14
    		—M14 × 1.5 mmNoNo—Forcing Screw0000000000000———0
    3" to 12"11 3/4"11SteelSteel13 1/4"—3/4
    		M18 × 1.5 mmNoNo—Forcing Screw0000000000000———0
    3 1/4" to 11 3/4"9 1/2"17 1/2SteelSteel13 1/4"1"-14
    		—5/8"-18
    		NoNo2"Forcing Screw000000000000000000000000000
    7" to 16 1/4"8 1/2"30SteelSteel17 1/4"1 1/2"-12
    		—1"-14
    		NoNo2"Forcing Screw000000000000000000000000000
     
    Gear and Bearing Puller Legs
    Pair
    Legs for 10-ton Capacity Pullers (11 ¾" Reach)00000000000000
    Legs for 10-ton Capacity Pullers (15 ¾" Reach)0000000000000
    Legs for 17 ½-ton Capacity Pullers (4 ½" Reach)00000000000000
    Legs for 17 ½-ton Capacity Pullers (16 ½" Reach)00000000000000
    Legs for 17 ½-ton Capacity Pullers (22 ½" Reach)00000000000000
    Legs for 17 ½-ton Capacity Pullers (30" Reach)00000000000000
    Legs for 30-ton Capacity Pullers (18" Reach)00000000000000
    Legs for 30-ton Capacity Pullers (28" Reach)00000000000000

    Bearing Separators

    Image of Product. Front orientation. Bearing Separators.
    Image of Product. Separator with Clamping Screw. Front orientation. Bearing Separators. Clamping Screw.

    Separator

    with Clamping Screw

    Separate bearings, collars, hubs, and other shaft-mounted items so you can remove them. After separation, use a puller (not included) to remove them from the shaft.
    Separators can be used with Face-Grip Gear and Bearing Pullers. Select a face-grip gear and bearing puller with a leg thread size that matches the thread size of your separator.
    Clamping Screw—Separators with a clamping screw use screw tension to force separator plates under bearings when there isn’t enough space for them to fit.
    Spreader Opening
    Thread Size
    Lg.
    Wd.
    Each
    Steel Bearing Separators
    1/8" to 1 7/8"3/8"-16
    		2 3/4"3 1/2"000000000000
    1/4" to 13/16"15/16"-18
    		2 1/4"2 3/4"000000000000
    1/2" to 4 1/4"5/8"-18
    		5"6 1/4"000000000000
    1/2" to 5 5/8"5/8"-18
    		6 3/4"8 1/4"000000000000
    1/2" to 8 7/8"5/8"-18
    		6 3/4"8 1/4"000000000000
    3/4" to 13 1/4"1"-14
    		10 3/4"13 1/2"00000000000000
     
    Steel Bearing Separators with Clamping Screw
    3/8" to 2 3/16"M10 × 1.5 mm7 3/4"4"00000000000000
    3/8" to 2 13/16"M10 × 1.5 mm8"4 3/4"00000000000000
    7/8" to 4 3/8"M14 × 1.5 mm11 1/4"6 3/4"00000000000000
    1 3/16" to 5 3/4"M18 × 1.5 mm14 1/4"8 1/2"00000000000000
     

    Bearing and V-Belt Pulley Separator Sets

    Image of Product. Set with 5 Separators. Front orientation. Bearing and V-Belt Pulley Separator Sets. 5 Separators.
    Image of Product. Set with Face-Grip Puller. Front orientation. Bearing and V-Belt Pulley Separator Sets. 1 Separator.
    Image of Product. Set with Face-Grip Puller and Clamping Screw. Front orientation. Bearing and V-Belt Pulley Separator Sets. 1 Separator, Clamping Screw.

    Set with 5 Separators

    Set with Face-Grip Puller

    Set with Face-Grip Puller

    and Clamping Screw

    Separate bearings, collars, hubs, and other shaft-mounted items so you can remove them. After separation, use a puller (not included with all sets) to remove them from the shaft.
    5 Separators—Sets with 5 separators do not include face-grip pullers. Select a face-grip gear and bearing puller with a leg thread size that matches the thread size of your separator.
    Clamping Screw—Sets that include a clamping screw use screw tension to force separator plates under bearing if there is not enough clearance.
    Thread Size
    Material
    Includes
    Each
    5 Separators
    3/8"-16
    5/8"-18
    15/16"-18
    		Steel5 Separators (1 3/4"-5 3/4" Spread, 1/2"-4 1/4" Spread, 1/2"-8 7/8" Spread, 1/4"-13/16" Spread, 1/8"-1 7/8" Spread)
    Plastic Case    		00000000000000
     
    1 Separator
    3/4"-14
    		SteelSeparator (1 3/16"-9 7/8" Spread)
    Face-Grip Puller (For 5 7/8"-17 3/8" OD, 15 3/4" Reach, 3/4"-14 Leg Thread Size) with 19 5/8" Long Forcing Screw
    Pair of Legs (7 7/8" Reach) for Face-Grip Puller
    Grease
    Plastic Case    		000000000000000
    M10
    		SteelSeparator (5/16"-2 3/8" Spread)
    Face-Grip Puller (For 2"-4 3/8" OD, 5 7/8" Reach, M10 Leg Thread Size) with 5 1/8" Long Forcing Screw
    Pair of Legs (3 7/8" Reach) for Face-Grip Puller
    Grease
    Metal Case    		0000000000000
    M10
    		SteelSeparator (5/16"-2 3/8" Spread)
    Clamping Screw
    Face-Grip Puller (For 2"-4 3/8" OD, 5 7/8" Reach, M10 Leg Thread Size) with 5 1/8" Long Forcing Screw
    Pair of Legs (3 7/8" Reach) for Face-Grip Puller
    Grease
    Metal Case    		0000000000000
    M14
    		SteelSeparator (7/8"-4 1/2" Spread)
    Face-Grip Puller (For 2 3/4"-9 5/8" OD, 11 1/32" Reach, M14 Leg Thread Size) with 6 3/4" Long Forcing Screw
    Pair of Legs (3 7/8" Reach) for Face-Grip Puller
    Grease
    Plastic Case    		0000000000000
    M14
    		SteelSeparator (7/8"-4 1/2" Spread)
    Clamping Screw
    Face-Grip Puller (For 2 3/4"-9 5/8" OD, 11 1/32" Reach, M14 Leg Thread Size) with 6 3/4" Long Forcing Screw
    Pair of Legs (3 7/8" Reach) for Face-Grip Puller
    Grease
    Plastic Case    		0000000000000
    M18
    		SteelSeparator (1"-6 1/8" Spread)
    Face-Grip Puller (For 3 3/16"-11 7/8" OD, 11 7/8" Reach, M18 Leg Thread Size) with 11 3/4" Long Forcing Screw
    Pair of Legs (3 7/8" Reach) for Face-Grip Puller
    Grease
    Metal Case    		000000000000000
    M18
    		SteelSeparator (1"-6 1/8" Spread)
    Clamping Screw
    Face-Grip Puller (For 3 3/16"-11 7/8" OD, 11 7/8" Reach, M18 Leg Thread Size) with 11 3/4" Long Forcing Screw
    Pair of Legs (3 7/8" Reach) for Face-Grip Puller
    Grease
    Plastic Case    		000000000000000
     

    V-Belt Pulley Separators

    Image of Product. Front orientation. V-Belt Pulley Separators.
    Clamp these separators into the V-groove of a pulley for a secure grip. After separating pulleys, use a puller (not included) to remove them from the shaft.
    Separators can be used with Face-Grip Gear and Bearing Pullers (not included). Select a face-grip puller with a leg thread size that matches the thread size of your separator.
    For OD
    Thread
    Size
    Lg.
    Wd.
    Material
    Each
    1 3/4" to 5 3/4"5/8"-18
    		7"7 1/4"Steel0000000000000
    1 5/8" to 9 7/8"5/8"-18
    		9 1/4"12 3/4"Steel000000000000
    back to top