Search Results
Pump Material Pump Material |
|---|
|
Height Height |
|---|
|
|
|
Clarity Clarity |
|---|
|
Specifications Met Specifications Met |
|---|
|
Label Type Label Type |
|---|
|
Seal Material Seal Material |
|---|
|
Component Component |
|---|
|
Flow Rate Flow Rate |
|---|
|
Push-Top Dispensers
Semi-Clear Polyethylene Plastic
Amber Glass
Tin
Moisten swabs and wipes by pushing down on the top.
Dispensers with locking cap prevent spills.
Amber glass dispenser is good for light-sensitive contents.
Dispensers
| Cap., oz. | Dia. | Wd. | Dp. | Ht. | Dish Dia. | Clarity | Pump Material | Each | |
Semi-Clear Polyethylene Plastic | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 4 | __ | 2" | 2 1/8" | 3 3/8" | 1 1/2" | Semi-Clear | 303 Stainless Steel | 0000000 | 000000 |
| 6 | __ | 2 1/8" | 2 1/8" | 4 1/2" | 1 1/2" | Semi-Clear | 303 Stainless Steel | 0000000 | 00000 |
| 8 | __ | 2 1/8" | 2 1/8" | 5 1/4" | 1 1/2" | Semi-Clear | 303 Stainless Steel | 0000000 | 00000 |
Amber Glass | |||||||||
| 4 | 2 1/8" | __ | __ | 4 1/8" | 1 1/2" | Semi-Clear | 303 Stainless Steel | 0000000 | 00000 |
Tin | |||||||||
| 4 | 2 1/8" | __ | __ | 3 3/4" | 1 1/2" | __ | 303 Stainless Steel | 0000000 | 00000 |
Push-Top Dispensers for Flammable Liquids
Dispense flammable liquids with these FM-approved push-top dispensers. Excess liquid drains back into the dispenser through a mesh flame-arrester plate.
Dispensers
Powder-Coated Steel Dispenser
Polyethylene Plastic Dispenser
| Capacity | Diameter | Height | Dish Diameter | Color | Clarity | Pump Material | Specifications Met | Each | |
Powder-Coated Steel | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 16 oz. | 4 7/8" | 5 1/4" | 2 3/4" | Red | __ | Brass | FM Approved | 000000 | 000000 |
| 32 oz. | 7 1/4" | 5 5/8" | 5" | Red | __ | Brass | FM Approved | 000000 | 00000 |
| 64 oz. | 7 1/4" | 7 3/8" | 5" | Red | __ | Brass | FM Approved | 000000 | 00000 |
| 1 gal. | 7 1/4" | 10 1/2" | 5" | Red | __ | Brass | FM Approved | 000000 | 00000 |
Polyethylene Plastic | |||||||||
| 32 oz. | 5 1/4" | 9 3/4" | 5 1/4" | Red | Opaque | Brass | FM Approved | 0000000 | 00000 |
| 64 oz. | 6 1/2" | 11" | 5 1/4" | Red | Opaque | Brass | FM Approved | 0000000 | 00000 |
| 1 gal. | 7 3/4" | 13" | 5 1/4" | Red | Opaque | Brass | FM Approved | 0000000 | 00000 |
Replacement Parts for Plastic Dispensers
Replacement Can Body
Replacement Kit
Static Control Push-Top Dispensers
A
B
C
D
E (Acetone Shown)
F (Acetone Shown)
An additive prevents electrostatic discharge from building up on the surface of this dispenser.
| Contents Message | Electrical Properties | Surface Resistivity, ohms/sq. | Cap., oz. | Wd. | Dp. | Ht. | Dish Dia. | Color | Pump Material | Features | Specifications Met | Each | ||
Opaque Polyethylene Plastic | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| A | __ | Static Dissipative | 104-1011 | 4 | 2 1/8" | 2 1/8" | 3 1/4" | 1 1/2" | Blue | 303 Stainless Steel | __ | __ | 0000000 | 000000 |
| A | __ | Static Dissipative | 104-1011 | 6 | 2 1/8" | 2 1/8" | 4 1/4" | 1 1/2" | Blue | 303 Stainless Steel | __ | __ | 0000000 | 00000 |
| A | __ | Static Dissipative | 104-1011 | 6 | 2 1/8" | 2 1/8" | 4 1/4" | 1 1/2" | Green | 303 Stainless Steel | __ | __ | 0000000 | 00000 |
| A | __ | Static Dissipative | 104-1011 | 6 | 2 1/8" | 2 1/8" | 4 1/4" | 1 1/2" | Orange | 303 Stainless Steel | __ | __ | 0000000 | 00000 |
| A | __ | Static Dissipative | 104-1011 | 6 | 2 1/8" | 2 1/8" | 4 1/4" | 1 1/2" | Yellow | 303 Stainless Steel | __ | __ | 0000000 | 00000 |
| A | __ | Static Dissipative | 104-1011 | 8 | 2 1/8" | 2 1/8" | 5" | 1 1/2" | Blue | 303 Stainless Steel | __ | __ | 0000000 | 00000 |
| B | __ | Static Dissipative | 104-1011 | 6 | 2 1/8" | 2 1/8" | 4 1/4" | 1 1/2" | Blue | 303 Stainless Steel | Locking Cap | __ | 0000000 | 00000 |
| C | __ | Static Dissipative | 104-1011 | 6 | 2 1/8" | 2 1/8" | 4 1/4" | 1 1/2" | Blue | 303 Stainless Steel | Locking Cap | __ | 0000000 | 00000 |
| C | __ | Static Dissipative | 104-1011 | 6 | 2 1/8" | 2 1/8" | 4 1/4" | 1 1/2" | Yellow | 303 Stainless Steel | Locking Cap | __ | 0000000 | 00000 |
| D | Flux Remover | Static Dissipative | 104-1011 | 6 | 2 1/8" | 2 1/8" | 4 1/4" | 1 1/2" | Blue | 303 Stainless Steel | __ | __ | 0000000 | 00000 |
| D | Flux Remover | Static Dissipative | 104-1011 | 6 | 2 1/8" | 2 1/8" | 4 1/4" | 1 1/2" | Green | 303 Stainless Steel | __ | __ | 0000000 | 00000 |
| D | Flux Remover | Static Dissipative | 104-1011 | 6 | 2 1/8" | 2 1/8" | 4 1/4" | 1 1/2" | Orange | 303 Stainless Steel | __ | __ | 0000000 | 00000 |
| D | Flux Remover | Static Dissipative | 104-1011 | 6 | 2 1/8" | 2 1/8" | 4 1/4" | 1 1/2" | Yellow | 303 Stainless Steel | __ | __ | 0000000 | 00000 |
| E | Acetone | Static Dissipative | 104-1011 | 6 | 2 1/8" | 2 1/8" | 4 1/4" | 1 1/2" | Blue | 303 Stainless Steel | __ | GHS Standards | 0000000 | 00000 |
| E | Isopropanol | Static Dissipative | 104-1011 | 6 | 2 1/8" | 2 1/8" | 4 1/4" | 1 1/2" | Blue | 303 Stainless Steel | __ | GHS Standards | 0000000 | 00000 |
| E | Toluene | Static Dissipative | 104-1011 | 6 | 2 1/8" | 2 1/8" | 4 1/4" | 1 1/2" | Blue | 303 Stainless Steel | __ | GHS Standards | 0000000 | 00000 |
| F | Acetone | Static Dissipative | 104-1011 | 6 | 2 1/8" | 2 1/8" | 4 1/4" | 1 1/2" | Blue | 303 Stainless Steel | __ | __ | 0000000 | 00000 |
| F | Acetone | Static Dissipative | 104-1011 | 6 | 2 1/8" | 2 1/8" | 4 1/4" | 1 1/2" | Green | 303 Stainless Steel | __ | __ | 0000000 | 00000 |
| F | Acetone | Static Dissipative | 104-1011 | 6 | 2 1/8" | 2 1/8" | 4 1/4" | 1 1/2" | Orange | 303 Stainless Steel | __ | __ | 0000000 | 00000 |
| F | Acetone | Static Dissipative | 104-1011 | 6 | 2 1/8" | 2 1/8" | 4 1/4" | 1 1/2" | Yellow | 303 Stainless Steel | __ | __ | 0000000 | 00000 |
| F | Acetone | Static Dissipative | 104-1011 | 8 | 2 1/8" | 2 1/8" | 5" | 1 1/2" | Blue | 303 Stainless Steel | __ | __ | 0000000 | 00000 |
| F | Blank | Static Dissipative | 104-1011 | 6 | 2 1/8" | 2 1/8" | 4 1/4" | 1 1/2" | Blue | 303 Stainless Steel | __ | __ | 0000000 | 00000 |
| F | Isopropanol | Static Dissipative | 104-1011 | 6 | 2 1/8" | 2 1/8" | 4 1/4" | 1 1/2" | Blue | 303 Stainless Steel | __ | __ | 0000000 | 00000 |
| F | Isopropanol | Static Dissipative | 104-1011 | 6 | 2 1/8" | 2 1/8" | 4 1/4" | 1 1/2" | Green | 303 Stainless Steel | __ | __ | 0000000 | 00000 |
| F | Isopropanol | Static Dissipative | 104-1011 | 6 | 2 1/8" | 2 1/8" | 4 1/4" | 1 1/2" | Orange | 303 Stainless Steel | __ | __ | 0000000 | 00000 |
| F | Isopropanol | Static Dissipative | 104-1011 | 6 | 2 1/8" | 2 1/8" | 4 1/4" | 1 1/2" | Yellow | 303 Stainless Steel | __ | __ | 0000000 | 00000 |
| F | Isopropanol | Static Dissipative | 104-1011 | 8 | 2 1/8" | 2 1/8" | 5" | 1 1/2" | Blue | 303 Stainless Steel | __ | __ | 0000000 | 00000 |
Bottle-Top Dispensers
Often used in laboratories, these dispensers fit on most lab bottles. Push down on the top to dispense precise amounts of acids, solvents, and other liquids.
| Flow Rate, ml/stroke | For Mouth OD | Ht. | Spout Lg. | Graduation Marks | Pump Material | Spout Material | Seal Material | Intake Tube Material | Max. Temperature, °F | Includes | Each | |
| 0.2-2 | 1 1/4", 1 1/2", 1 3/4" | 7 1/2" | 4" | 0.04 ml | Polyethylene Plastic | FEP Plastic | EPDM Rubber | Polypropylene Plastic | 100° | Two Thread Adapters | 0000000 | 0000000 |
| 1-10 | 1 1/4", 1 1/2", 1 3/4" | 7 1/2" | 4" | 0.2 ml | Polyethylene Plastic | FEP Plastic | EPDM Rubber | Polypropylene Plastic | 100° | Two Thread Adapters | 0000000 | 000000 |
| 2.5-25 | 1 1/4", 1 1/2", 1 3/4" | 7 1/2" | 4" | 0.5 ml | Polyethylene Plastic | FEP Plastic | EPDM Rubber | Polypropylene Plastic | 100° | Two Thread Adapters | 0000000 | 000000 |
Push-Top Jugs
Semi-Clear
Opaque
Push-to-Dispense Bottles for Flammable Liquids
A
B
C
Turn these bottles upside down and press the flange to dispense.
| Cap., oz. | Dia. | Ht. | Color | Clarity | Material | Pump Material | Specifications Met | Each | ||
| A | 8 | 3 1/8" | 5 1/2" | Red | Opaque | Polyethylene Plastic | Brass | FM Approved | 000000 | 000000 |
| A | 8 | 3 1/8" | 5 1/2" | Semi-Clear | Semi-Clear | Polyethylene Plastic | Brass | FM Approved | 000000 | 00000 |
| B | 32 | 4" | 10 1/2" | Red | Opaque | Polyethylene Plastic | Brass | FM Approved | 000000 | 00000 |
| B | 32 | 4" | 10 1/2" | Semi-Clear | Semi-Clear | Polyethylene Plastic | Brass | FM Approved | 000000 | 00000 |
| C | 4 | 2 1/4" | 5 1/2" | Semi-Clear | Semi-Clear | Polyethylene Plastic | Brass | FM Approved | 000000 | 00000 |
Dispensing Bottles for Flammable Liquids
Squeeze the ball to create pressure, then push down on the dispenser to dispense flammable liquids into vials, test tubes, and other small containers. Only a PTFE tube and stainless steel pump come into contact with the liquid. The dispenser has a self-closing valve to prevent dripping.
Optional thread adapters allow you to fit the dispenser onto most laboratory bottles.
Dispensing Bottles
Capacity | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| ml | oz. | Mouth OD | Graduation Marks | Color | Material | Pump Material | Intake Tube Material | Autoclavable | Includes | Each | |
| 1,000 | 34 | 1 3/4" | 50 ml | Clear | Glass | 304 Stainless Steel | PTFE Plastic | Yes | Grounding Wire with Clamp | 0000000 | 0000000 |
Replacement Intake Tubing
Intake Tube | |||||
|---|---|---|---|---|---|
| ID | OD | Lg., ft. | Material | Each | |
| 0.24" | 0.31" | 16 1/2 | PTFE Plastic | 0000000 | 000000 |
Design-Your-Own Sealed Dispensers
Choose from a variety of containers, lids, and accessories to design a dispenser that will pour or pump contents without allowing contaminants inside. These dispensers are often used with oil and other lubricating fluids. Not for use with fuels or solvents.
Containers and lids are all interchangeable.
Spout extenders are used with the lids with twist-open spout. They allow controlled pouring in hard-to-reach areas.
Pumps are used with the lids with threaded cap. They dispense approximately 2.8 oz. per stroke. Pumps cannot be used with the 64-oz. container.
Hose kit is used with the heavy duty pump. It allows you to fill the container without removing the lid. You can also use it to attach the container to threaded machinery fill points.
Breather vent screws into the inlet on the heavy duty pump to protect against contaminants.
Reducer nozzle is used with either the standard or heavy duty pump to reduce the hose outlet for controlled dispensing.
Containers
64 oz. to 1 1/4 gal.
2 1/2 gal.
| Cap. | Dia. | Ht. | Mouth OD | Graduation Marks | Material | Color | Max. Temp., °F | Each | |
| 64 oz. | 6 5/8" | 8 3/4" | 4 7/8" | 1/4 qt., 0.25 L | Polyethylene Plastic | Semi-Clear | 175° | 0000000 | 000000 |
| 96 oz. | 6 3/4" | 10 1/2" | 4 7/8" | 1/4 qt., 0.25 L | Polyethylene Plastic | Semi-Clear | 175° | 0000000 | 00000 |
| 1 1/4 gal. | 7" | 11" | 4 7/8" | 1/2 qt., 0.5 L | Polyethylene Plastic | Semi-Clear | 175° | 0000000 | 00000 |
| 2 1/2 gal. | 9 3/4" | 13 3/4" | 4 7/8" | 1/2 qt., 0.5 L | Polyethylene Plastic | Semi-Clear | 175° | 0000000 | 00000 |
Lids
Lid
Lid with Threaded Cap
Lid with Twist-Open Spout
Lids | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
Spout | Replacement Seal Kits | ||||||||||
| Component | For Mouth OD | Opening Dia. | Lg. | Lid Material | Seal Material | Max. Temp., °F | Choose a Lid Color | Each | Each | ||
| Lid | 4 7/8" | __ | __ | Polyethylene Plastic | Buna-N Rubber | 175° | 0000000 | 000000 | 000000 | 00 | |
| Lid with Threaded Cap | 4 7/8" | __ | __ | Polyethylene Plastic | Buna-N Rubber | 175° | 0000000 | 00000 | 000000 | 00 | |
| Lid with Twist-Open Spout | 4 7/8" | 1/4" | 5" | Polyethylene Plastic | Buna-N Rubber | 175° | 0000000 | 00000 | 0000000 | 00000 | |
| Lid with Twist-Open Spout | 4 7/8" | 1/2" | 8" | Polyethylene Plastic | Buna-N Rubber | 175° | 0000000 | 00000 | 0000000 | 0000 | |
| Lid with Twist-Open Spout | 4 7/8" | 1" | 5" | Polyethylene Plastic | Buna-N Rubber | 175° | 0000000 | 00000 | 0000000 | 0000 | |
Pumps for Lid with Threaded Cap
Pump
Heavy Duty Pump
Pumps | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Outlet | Inlet | Replacement Seal Kits | |||||||||||||||
| Component | Max. Viscosity, cP | Flow Rate, oz./stroke | Nozzle OD | Hose Lg., ft. | Hose Material | Seal Material | Pipe Size | Thread Type | Gender | Pipe Size | Thread Type | Gender | Max. Temp., °F | Each | Each | ||
| Pump | 400 | 2.8 | 1/2" | 5 | PVC Plastic | Buna-N Rubber | 1/4 | NPT | Male | __ | __ | __ | 175° | 0000000 | 000000 | 0000000 | 00000 |
| Heavy Duty Pump | 600 | 2.8 | 1/2" | 5 | PVC Plastic | Viton® Fluoroelastomer Rubber | 1/4 | NPT | Male | 1/4 | NPT | Male | 175° | 0000000 | 000000 | 0000000 | 00000 |
Reducer Nozzles for Pumps
Nozzle | ||||
|---|---|---|---|---|
| OD | Material | Max. Temp., °F | Each | |
| 1/4" | Polyethylene Plastic | 175° | 0000000 | 00000 |
Optional Discharge Hoses for Pumps
With Nozzle
With NPT Outlet
Nozzle | Outlet | Inlet | Hose | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| OD | Material | Pipe Size | Thread Type | Gender | Pipe Size | Thread Type | Gender | Material | Reinforcement Material | Max. Temp., °F | Each | |
5-ft. Lg. | ||||||||||||
| 1/2" | Aluminum | __ | __ | __ | 1/4 | NPT | Female | PVC Plastic | 304 Stainless Steel | 175° | 0000000 | 000000 |
| __ | __ | 1/4 | NPT | Male | 1/4 | NPT | Female | PVC Plastic | 304 Stainless Steel | 175° | 0000000 | 00000 |
10-ft. Lg. | ||||||||||||
| 1/2" | Aluminum | __ | __ | __ | 1/4 | NPT | Female | PVC Plastic | 304 Stainless Steel | 175° | 0000000 | 00000 |
| __ | __ | 1/4 | NPT | Male | 1/4 | NPT | Female | PVC Plastic | 304 Stainless Steel | 175° | 0000000 | 00000 |
Hose Kits for Heavy Duty Pump
Outlet | Inlet | Hose | 5-ft. Lg. | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Pipe Size | Thread Type | Gender | Pipe Size | Thread Type | Inlet Gender | Material | Reinforcement Material | Removes Particle Size Down To, microns | Max. Temp., °F | Includes | Each | |
| 1/4 | NPT | Male | 1/4 | NPT | Female | PVC Plastic | 304 Stainless Steel | 10 | 175° | 1/4 NPT Male Adapter, Breather Vent | 0000000 | 000000 |
Breather Vents for Heavy Duty Pump
| Removes Particle Size Down To, microns | Max. Temp., °F | Each | |
| 10 | 175° | 0000000 | 000000 |