PVC Pipe Saddles | McMaster-Carr

Filter by

Material

Pipe Material

System of Measurement

Pipe Size

Fitting Type

Pipe Schedule

Shape

Fitting Connection

For Pipe OD

Hole Diameter

For Use With

Sodium Hydroxide (Caustic Soda)

Flange Material

Length

Maximum Pressure @ Temperature

Color

Connects To

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Maximum Temperature

Minimum Temperature

REACH

RoHS

Export Control Classification Number (ECCN)

2B999

EAR99

DFARS Specialty Metals

Finish

Performance

150 Products

About Pipe and Fittings

Measure your pipe and fittings to identify their pipe size, thread size, schedule, and thread type. Then, find compatible components.

Thick-Wall Plastic Pipe Fittings for Water

Connect these fittings to Schedule 80 pipe. With thicker, stronger walls than standard-wall fittings, they can handle heavy duty supply applications, such as water processing, wastewater treatment, and irrigation. Fittings are plastic for good corrosion resistance. They meet ASTM specifications and testing requirements for material quality.

To prevent leaks in threaded connections, apply a sealant to the male threads. Threaded connections can be taken apart as needed for maintenance and repair. For metal threads, use PTFE tape. For plastic threads, apply a non-hardening, plastic-compatible sealant. Tape or sealants with PTFE are not recommended for plastic-to-plastic connections. When making a threaded connection be careful not to overtighten the threads. To prevent cracks and leaks, finger tighten the fitting, then wrench-tighten one to two turns.

Warning: Never use plastic pipe fittings, flanges, and pipe with compressed air or gas.

Note: For fittings that are not rated for pressure, you can use the pressure rating of the plastic pipe as a reference. Threaded fittings are limited to 50% of the rated pressure of the pipe.

Saddle Tap Tees with Gasket

Cement Socket

Female × Clamp

Saddle-tap tee adapters allow you to create additional outlets and connections in metal or plastic pipe. To install, shut down your line and drill a hole in the pipe where you want to create a connection. Position the saddle over the hole so the gasket and lip are fully engaged and secure with the included nuts, bolts, and washers.

Cement-Socket Fitting Connection—Attach socket-connect ends to unthreaded pipe or another socket-connect fitting with a PVC primer and cement (also known as solvent weld).

NSF/ANSI 61—To adhere to safety standards for drinking water systems, use pipe that meets NSF/ANSI 61.

	For Pipe Size (B)	For Pipe OD (B)	For Hole Dia.	Pipe Schedule	Material	Color	Max. Pressure @ Temp.	Gasket Material	Food Industry Std.		Each
Cement Socket Female × Clamp On



	1/2	2	2 3/8"	3/4"	80	PVC	Dark Gray	200 psi @ 72° F	EPDM	NSF/ANSI 61	4849K14	000000


	1/2	3	3 1/2"	7/8"	80	PVC	Dark Gray	185 psi @ 72° F	EPDM	NSF/ANSI 61	4849K19	00000
	1/2	4	4 1/2"	1 1/8"	80	PVC	Dark Gray	160 psi @ 72° F	EPDM	NSF/ANSI 61	4849K42	00000
	3/4	2	2 3/8"	7/8"	80	PVC	Dark Gray	345 psi @ 72° F	EPDM	NSF/ANSI 61	4849K15	00000
	3/4	3	3 1/2"	1 1/8"	80	PVC	Dark Gray	345 psi @ 72° F	EPDM	NSF/ANSI 61	4849K26	00000
	3/4	4	4 1/2"	1 1/8"	80	PVC	Dark Gray	345 psi @ 72° F	EPDM	NSF/ANSI 61	4849K43	00000
	1	2	2 3/8"	1 1/8"	80	PVC	Dark Gray	315 psi @ 72° F	EPDM	NSF/ANSI 61	4849K13	00000
	1	3	3 1/2"	2 1/4"	80	PVC	Dark Gray	315 psi @ 72° F	EPDM	NSF/ANSI 61	4849K29	00000
	1	4	4 1/2"	1 1/8"	80	PVC	Dark Gray	315 psi @ 72° F	EPDM	NSF/ANSI 61	4849K44	00000
	1	6	6 5/8"	1 1/8"	80	PVC	Dark Gray	315 psi @ 72° F	EPDM	NSF/ANSI 61	4849K69	000000
	1 1/2	3	3 1/2"	2 1/4"	80	PVC	Dark Gray	235 psi @ 72° F	EPDM	NSF/ANSI 61	4849K35	00000


	1 1/2	4	4 1/2"	1 3/4"	80	PVC	Dark Gray	235 psi @ 72° F	EPDM	NSF/ANSI 61	4849K45	00000
	2	3	3 1/2"	1 1/8"	80	PVC	Dark Gray	200 psi @ 72° F	EPDM	NSF/ANSI 61	4849K38	00000
	2	4	4 1/2"	2 1/4"	80	PVC	Dark Gray	200 psi @ 72° F	EPDM	NSF/ANSI 61	4849K46	00000
	2	6	6 5/8"	2 1/4"	80	PVC	Dark Gray	200 psi @ 72° F	EPDM	NSF/ANSI 61	4849K37	000000
	3	4	4 1/2"	3"	80	PVC	Dark Gray	185 psi @ 72° F	EPDM	NSF/ANSI 61	4849K31	000000
	3	6	6 5/8"	3"	80	PVC	Dark Gray	185 psi @ 72° F	EPDM	NSF/ANSI 61	4849K39	000000

Saddle Tap Tees with Collar and Gasket

Female x Clamp On

Fittings with collar have a stainless steel reinforcement on the female threads to prevent the threads from cracking.

NSF/ANSI 61—To adhere to safety standards for drinking water systems, use pipe that meets NSF/ANSI 61.

	For Pipe Size (B)	For Pipe OD (B)	For Hole Dia.	Pipe Schedule	Material	Color	Max. Pressure @ Temp.	Gasket Material	Food Industry Std.		Each
NPT Female × Clamp On



	1/2	2	2 3/8"	3/4"	80	PVC	Dark Gray	200 psi @ 72° F	EPDM	NSF/ANSI 61	4849K51	000000


	1/2	3	3 1/2"	7/8"	80	PVC	Dark Gray	200 psi @ 72° F	EPDM	NSF/ANSI 61	4849K56	00000
	1/2	4	4 1/2"	1 1/8"	80	PVC	Dark Gray	200 psi @ 72° F	EPDM	NSF/ANSI 61	4849K63	000000
	3/4	2	2 3/8"	7/8"	80	PVC	Dark Gray	200 psi @ 72° F	EPDM	NSF/ANSI 61	4849K52	00000
	3/4	3	3 1/2"	7/8"	80	PVC	Dark Gray	200 psi @ 72° F	EPDM	NSF/ANSI 61	4849K57	00000
	3/4	4	4 1/2"	1 1/8"	80	PVC	Dark Gray	200 psi @ 72° F	EPDM	NSF/ANSI 61	4849K64	000000
	1	2	2 3/8"	1 1/8"	80	PVC	Dark Gray	200 psi @ 72° F	EPDM	NSF/ANSI 61	4849K53	00000
	1	3	3 1/2"	1 1/8"	80	PVC	Dark Gray	200 psi @ 72° F	EPDM	NSF/ANSI 61	4849K58	00000
	1	4	4 1/2"	1 1/8"	80	PVC	Dark Gray	200 psi @ 72° F	EPDM	NSF/ANSI 61	4849K65	000000
	1	6	6 5/8"	1 1/8"	80	PVC	Dark Gray	315 psi @ 72° F	EPDM	NSF/ANSI 61	4849K74	000000
	1 1/2	3	3 1/2"	2 1/4"	80	PVC	Dark Gray	200 psi @ 72° F	EPDM	NSF/ANSI 61	4849K61	00000


	1 1/2	4	4 1/2"	1 3/4"	80	PVC	Dark Gray	200 psi @ 72° F	EPDM	NSF/ANSI 61	4849K67	000000
	2	3	3 1/2"	2 1/4"	80	PVC	Dark Gray	200 psi @ 72° F	EPDM	NSF/ANSI 61	4849K62	00000
	2	4	4 1/2"	2 1/4"	80	PVC	Dark Gray	200 psi @ 72° F	EPDM	NSF/ANSI 61	4849K68	000000
	2	6	6 5/8"	2 1/4"	80	PVC	Dark Gray	200 psi @ 72° F	EPDM	NSF/ANSI 61	4849K82	000000
	3	4	4 1/2"	3"	80	PVC	Dark Gray	185 psi @ 72° F	EPDM	NSF/ANSI 61	4849K71	000000
	3	6	6 5/8"	3"	80	PVC	Dark Gray	185 psi @ 72° F	EPDM	NSF/ANSI 61	4849K83	000000

Standard-Wall Plastic Pipe Fittings for Water

Connect these fittings to Schedule 40 plastic pipe–they are the industry standard for residential and commercial low-pressure plumbing and water supply applications. They are plastic for good corrosion resistance.

Warning: Never use plastic pipe fittings, flanges, and pipe with compressed air or gas.

Note: For fittings that are not rated for pressure, you can use the pressure rating of the plastic pipe as a reference. Threaded fittings are limited to 50% of the rated pressure of the pipe.

Saddle Tap Tees with Gasket

Female × Clamp On

Cement-Socket Fitting Connection—Attach socket-connect ends to unthreaded pipe or another socket-connect fitting with a PVC primer and cement (also known as solvent weld).

NSF/ANSI 61—To adhere to safety standards for drinking water systems, use pipe that meets NSF/ANSI 61.

	For Pipe Size (B)	For Pipe OD (B)	For Hole Dia.	OD	Pipe Schedule	Material	Color	Max. Pressure @ Temp.	Gasket Material	Food Industry Std.		Each
Cement Socket Female × Clamp On



	1/2	2	2 3/8"	3/4"	27/32"	40	PVC	White	300 psi @ 72° F	EPDM	NSF/ANSI 61	4763K11	000000


	1/2	3	3 1/2"	7/8"	27/32"	40	PVC	White	300 psi @ 72° F	EPDM	NSF/ANSI 61	4763K16	00000
	1/2	4	4 1/2"	1 1/8"	27/32"	40	PVC	White	300 psi @ 72° F	EPDM	NSF/ANSI 61	4763K23	00000
	3/4	2	2 3/8"	7/8"	1 1/16"	40	PVC	White	240 psi @ 72° F	EPDM	NSF/ANSI 61	4763K43	00000
	3/4	3	3 1/2"	7/8"	1 1/16"	40	PVC	White	240 psi @ 72° F	EPDM	NSF/ANSI 61	4763K17	00000
	3/4	4	4 1/2"	1 1/8"	1 1/16"	40	PVC	White	240 psi @ 72° F	EPDM	NSF/ANSI 61	4763K24	000000
	1	2	2 3/8"	1 1/8"	1 5/16"	40	PVC	White	225 psi @ 72° F	EPDM	NSF/ANSI 61	4763K44	00000
	1	3	3 1/2"	1 1/8"	1 5/16"	40	PVC	White	225 psi @ 72° F	EPDM	NSF/ANSI 61	4763K18	00000
	1	4	4 1/2"	1 1/8"	1 5/16"	40	PVC	White	225 psi @ 72° F	EPDM	NSF/ANSI 61	4763K25	000000
	1	6	6 5/8"	1 1/8"	1 5/16"	40	PVC	White	225 psi @ 72° F	EPDM	NSF/ANSI 61	4763K42	000000
	1 1/2	3	3 1/2"	2 1/4"	1 29/32"	40	PVC	White	200 psi @ 72° F	EPDM	NSF/ANSI 61	4763K21	00000


	1 1/2	4	4 1/2"	1 3/4"	1 29/32"	40	PVC	White	200 psi @ 72° F	EPDM	NSF/ANSI 61	4763K27	000000
	2	3	3 1/2"	2 1/4"	2 3/8"	40	PVC	White	200 psi @ 72° F	EPDM	NSF/ANSI 61	4763K22	00000
	2	4	4 1/2"	2 1/4"	2 3/8"	40	PVC	White	200 psi @ 72° F	EPDM	NSF/ANSI 61	4763K28	000000
	2	6	6 5/8"	2 1/4"	2 3/8"	40	PVC	White	200 psi @ 72° F	EPDM	NSF/ANSI 61	4763K82	000000
	3	4	4 1/2"	3"	3 1/2"	40	PVC	White	200 psi @ 72° F	EPDM	NSF/ANSI 61	4763K31	000000

Saddle Tap Tees with Collar and Gasket

Female × Clamp On

Fittings with collar have a stainless steel reinforcement on the female threads to prevent the threads from cracking.

NSF/ANSI 61—To adhere to safety standards for drinking water systems, use pipe that meets NSF/ANSI 61.

	For Pipe Size (B)	For Pipe OD (B)	For Hole Dia.	OD	Pipe Schedule	Material	Color	Max. Pressure @ Temp.	Gasket Material	Food Industry Std.		Each
NPT Female × Clamp On



	1/2	2	2 3/8"	3/4"	27/32"	40	PVC	White	200 psi @ 72° F	EPDM	NSF/ANSI 61	4763K51	000000


	1/2	3	3 1/2"	7/8"	27/32"	40	PVC	White	300 psi @ 72° F	EPDM	NSF/ANSI 61	4763K56	000000
	1/2	4	4 1/2"	1 1/8"	27/32"	40	PVC	White	300 psi @ 72° F	EPDM	NSF/ANSI 61	4763K63	000000
	3/4	2	2 3/8"	7/8"	1 3/64"	40	PVC	White	200 psi @ 72° F	EPDM	NSF/ANSI 61	4763K52	00000
	3/4	3	3 1/2"	7/8"	1 1/16"	40	PVC	White	240 psi @ 72° F	EPDM	NSF/ANSI 61	4763K57	000000
	3/4	4	4 1/2"	1 1/8"	1 3/64"	40	PVC	White	200 psi @ 72° F	EPDM	NSF/ANSI 61	4763K64	000000
	1	2	2 3/8"	1 1/8"	1 5/16"	40	PVC	White	200 psi @ 72° F	EPDM	NSF/ANSI 61	4763K53	00000
	1	3	3 1/2"	1 1/8"	1 5/16"	40	PVC	White	225 psi @ 72° F	EPDM	NSF/ANSI 61	4763K58	000000
	1	4	4 1/2"	1 1/8"	1 5/16"	40	PVC	White	200 psi @ 72° F	EPDM	NSF/ANSI 61	4763K65	000000
	1	6	1 5/8"	1 1/8"	1 5/16"	40	PVC	White	225 psi @ 72° F	EPDM	NSF/ANSI 61	4763K45	000000
	1 1/2	3	3 1/2"	2 1/4"	1 29/32"	40	PVC	White	165 psi @ 72° F	EPDM	NSF/ANSI 61	4763K61	000000


	1 1/2	4	4 1/2"	1 3/4"	1 29/32"	40	PVC	White	165 psi @ 72° F	EPDM	NSF/ANSI 61	4763K67	000000
	2	3	3 1/2"	2 1/4"	2 3/8"	40	PVC	White	140 psi @ 72° F	EPDM	NSF/ANSI 61	4763K46	00000
	2	4	4 1/2"	2"	2 3/8"	40	PVC	White	140 psi @ 72° F	EPDM	NSF/ANSI 61	4763K68	000000
	2	6	6 5/8"	2 1/4"	2 3/8"	40	PVC	White	200 psi @ 72° F	EPDM	NSF/ANSI 61	4763K85	000000
	3	4	4 1/2"	3"	3 1/2"	40	PVC	White	130 psi @ 72° F	EPDM	NSF/ANSI 61	4763K71	000000

Tee Outlets

Female × Cement

Socket

Tee outlets allow you to create additional outlets and connections in plastic pipe. Use a PVC primer and cement to secure the tee outlet into position, then drill a hole through the fitting and pipe. They are also known as branch connectors.

Cement-Socket Fitting Connection—Attach socket-connect ends to unthreaded pipe or another socket-connect fitting with a PVC primer and cement (also known as solvent weld).

NSF/ANSI 61—To adhere to safety standards for drinking water systems, use pipe that meets NSF/ANSI 61.

	For Pipe Size (B)	Pipe Schedule	Material	Color	Max. Pressure @ Temp.	Food Industry Std.		Each
NPT Female × Cement Socket



	1/8	1/2	40	PVC	White	Not Rated	NSF/ANSI 61	4880K118	00000


	1/8	3/4	40	PVC	White	Not Rated	NSF/ANSI 61	4880K119	0000
	1/2	1/2	40	PVC	White	Not Rated	NSF/ANSI 61	4880K116	0000
	1/2	3/4	40	PVC	White	Not Rated	NSF/ANSI 61	4880K105	0000
	1/2	1	40	PVC	White	Not Rated	NSF/ANSI 61	4880K106	0000
	3/4	3/4	40	PVC	White	Not Rated	NSF/ANSI 61	4880K104	0000
	3/4	1	40	PVC	White	Not Rated	NSF/ANSI 61	4880K107	0000
	1	1	40	PVC	White	Not Rated	NSF/ANSI 61	4880K117	0000

Drain, Waste, and Vent PVC Clamp-On Pipe Fittings for Water

To make installing and maintaining systems easy, these connectors come with clamps that form a strong seal on pipe and fittings once tightened.

Warning: Never use plastic pipe fittings, flanges, and pipe with compressed air or gas.

Saddle Tap Tees

Image of Product. Front orientation. Contains Annotated. Pipe and Fittings. Drain, Waste, and Vent PVC Clamp-On Pipe Fittings for Water, Saddle Tap Tees, Clamp On × Clamp On.

Clamp On × Clamp On

Saddle-tap adapters allow you to tap into an existing pipeline. They have wraparound clamps that provide nearly 360° contact with pipe; as the clamps are tightened, pressure is uniformly distributed around the pipe for maximum support. To install, shut down your line and drill a hole in the pipe where you want to create a connection. Position the saddle over the hole and tighten the clamps.

	For Pipe Size
	(A)	(B)	For Hole Dia.	Material	Max. Pressure @ Temp.	Clamp Material		Each
Clamp On × Clamp On



		4	6 to 12	4 1/8"	PVC	Not Rated	300 Series Stainless Steel	48545K15	000000


		6	6 to 12	5 1/2"	PVC	Not Rated	300 Series Stainless Steel	48545K17	000000

Saddle Tap Wyes

Image of Product. Front orientation. Contains Annotated. Pipe and Fittings. Drain, Waste, and Vent PVC Clamp-On Pipe Fittings for Water, Saddle Tap Wyes, Clamp On × Clamp On.

Clamp On × Clamp On

	For Pipe Size
	(A)	(B)	For Hole Dia.	Material	Max. Pressure @ Temp.	Clamp Material		Each
Clamp On × Clamp On



		4	6 to 12	4 1/8"	PVC	Not Rated	300 Series Stainless Steel	48545K19	0000000


		6	6 to 12	5 1/2"	PVC	Not Rated	300 Series Stainless Steel	48545K21	000000

CPVC Pipe Fittings for Chemicals

Made of CPVC, these fittings withstand salt solutions, acids, and other harsh substances. They have thick, strong walls to handle heavy duty industrial plumbing and water supply applications, such as water processing and wastewater treatment. These fittings are comparable to Corzan. Some meet ASTM D1784 specifications and testing requirements for material quality.

Warning: Never use plastic pipe fittings, flanges, and pipe with compressed air or gas.

Saddle Tap Tees with Gasket

NPT Female ×

Clamp On

Saddle-tap tees allow you to create additional outlets and connections in metal or plastic pipe. They clamp on for an easy way to install and maintain systems.

80 Pipe Schedule—Schedule 80 fittings have thick, strong walls for heavy duty, industrial applications.

NSF/ANSI 61—To adhere to safety standards for drinking water systems, use pipe that meets NSF/ANSI 61.

	For Pipe Size (B)	For Pipe OD (B)	For Hole Dia.	Pipe Schedule	Material	Color	Max. Pressure @ Temp.	Gasket Material	Food Industry Std.		Each
NPT Female × Clamp On



	1/2	2	2 3/8"	3/4"	80	CPVC	Light Gray	230 psi @ 72° F	EPDM	NSF/ANSI 61	4589K442	000000


	1/2	3	3 1/2"	7/8"	80	CPVC	Light Gray	230 psi @ 72° F	EPDM	NSF/ANSI 61	4589K445	00000
	1/2	4	4 1/2"	1 1/8"	80	CPVC	Light Gray	230 psi @ 72° F	EPDM	NSF/ANSI 61	4589K449	000000
	3/4	2	2 3/8"	7/8"	80	CPVC	Light Gray	230 psi @ 72° F	EPDM	NSF/ANSI 61	4589K443	00000
	3/4	3	3 1/2"	7/8"	80	CPVC	Light Gray	230 psi @ 72° F	EPDM	NSF/ANSI 61	4589K446	00000
	3/4	4	4 1/2"	1 1/8"	80	CPVC	Light Gray	230 psi @ 72° F	EPDM	NSF/ANSI 61	4589K451	000000
	1	2	2 3/8"	1 1/8"	80	CPVC	Light Gray	230 psi @ 72° F	EPDM	NSF/ANSI 61	4589K444	00000
	1	3	3 1/2"	1 1/8"	80	CPVC	Light Gray	230 psi @ 72° F	EPDM	NSF/ANSI 61	4589K447	00000
	1	4	4 1/2"	1 1/8"	80	CPVC	Light Gray	230 psi @ 72° F	EPDM	NSF/ANSI 61	4589K452	000000
	1 1/2	3	3 1/2"	2 1/4"	80	CPVC	Light Gray	230 psi @ 72° F	EPDM	NSF/ANSI 61	4589K448	00000
	1 1/2	4	4 1/2"	1 3/4"	80	CPVC	Light Gray	230 psi @ 72° F	EPDM	NSF/ANSI 61	4589K453	000000


	2	4	4 1/2"	2 1/4"	80	CPVC	Light Gray	230 psi @ 72° F	EPDM	NSF/ANSI 61	4589K454	000000
	2	6	6 5/8"	2 1/4"	80	CPVC	Light Gray	200 psi @ 72° F	EPDM	NSF/ANSI 61	4589K455	000000

Easy-Access CPVC Pipe Fittings for Chemicals

Also known as Victaulic fittings, these have grooved ends that connect to pipe with a clamp, so you can access your chemical process line for routine maintenance. Fittings are CPVC, which has excellent chemical resistance to withstand a variety of salt solutions, acids, and other harsh substances. They are comparable to Corzan. Fittings meet ASTM D1784 specifications and testing requirements for material quality.

Warning: Never use plastic pipe fittings, flanges, and pipe with compressed air or gas.

Clamp Connectors with Gasket

Grooved-End

Clamp-On Female

Clamp connectors let you connect CPVC grooved-end pipe fittings and pipe.

	For Pipe OD	Material	Color	Max. Pressure @ Temp.	Gasket Material		Each
Grooved-End Clamp-On Female



	2	2 3/8"	Enamel-Coated Iron	Orange	300 psi @ 72° F	EPDM	2663N27	000000


	3	3 1/2"	Enamel-Coated Iron	Orange	300 psi @ 72° F	EPDM	2663N28	00000
	4	4 1/2"	Enamel-Coated Iron	Orange	300 psi @ 72° F	EPDM	2663N29	000000

Clamp Adapters with Gasket

Grooved-End

Clamp-On

Female ×

Grooved-End

Clamp-On Female

Clamp adapters let you connect CPVC grooved-end pipe fittings and pipe to metal grooved-end pipe fittings and pipe.

	For Pipe Size		For Pipe OD
	(A)	(B)	(A)	(B)	Material	Color	Max. Pressure @ Temp.	Gasket Material		Each
Grooved-End Clamp-On Female × Grooved-End Clamp-On Female



		3	3	3 1/2"	3 1/2"	Enamel-Coated Iron	Orange	300 psi @ 72° F	EPDM	2663N31	000000


		4	4	4 1/2"	4 1/2"	Enamel-Coated Iron	Orange	300 psi @ 72° F	EPDM	2663N32	000000

Clamp Reducers with Gasket

Grooved-End Clamp-On

Female × Grooved-End

Clamp-On Female

Clamp reducers allow you to connect CPVC grooved-end pipe fittings and pipe and transition from a larger pipe size to a smaller pipe size.

	For Pipe Size		For Pipe OD
	(A)	(B)	(A)	(B)	Material	Color	Max. Pressure @ Temp.	Gasket Material		Each
Grooved-End Clamp-On Female × Grooved-End Clamp-On Female



		3	2	3 1/2"	2 3/8"	Enamel-Coated Iron	Orange	300 psi @ 72° F	EPDM	2663N33	000000


		4	2	4 1/2"	2 3/8"	Enamel-Coated Iron	Orange	300 psi @ 72° F	EPDM	2663N35	000000
		4	3	4 1/2"	3 1/2"	Enamel-Coated Iron	Orange	300 psi @ 72° F	EPDM	2663N34	000000

Pivoting Loop Pipe Hangers

Rotate

Secure pipe overhead and allow it to tilt or rotate as needed. These pipe hangers reduce stress on joints and keep pipe aligned, even when it shifts. Attach these hangers to beams or ceilings with threaded rod.

360° Rotation—Rotate to allow movement and flexibility when pipes need to be connected at non-standard angles and when working in tight spaces.

PVC-Coated Steel—Prevent wear from metal-to-metal contact due to movement or thermal expansion.

	ID
	Inch	Metric, mm	For Pipe Size	For Copper Tube Size	For Thread Size	Wt. Cap., lb.	Pkg. Qty.		Pkg.
360° Rotation







				PVC-Coated Steel

				13/16"	21	1/2	5/8	3/8"-16	610	1	3064T41	000000


				1 1/16"	27	3/4	—	3/8"-16	610	1	3064T42	00000
				1 5/16"	33	1	—	3/8"-16	610	1	3064T43	00000
				1 11/16"	43	1 1/4	1 1/2	3/8"-16	610	1	3064T44	00000
				1 7/8"	48	1 1/2	—	3/8"-16	610	1	3064T45	00000
				2 3/8"	60	2	—	3/8"-16	610	1	3064T46	00000
				2 7/8"	73	2 1/2	—	1/2"-13	970	1	3064T47	00000
				3 1/2"	89	3	—	1/2"-13	970	1	3064T48	00000
				4"	102	3 1/2	—	1/2"-13	970	1	3064T49	00000
				4 1/2"	114	4	—	5/8"-11	1,250	1	3064T51	00000

Pipe Cradles

Cradles provide additional support and prevent tears in insulation when routing insulated pipe through loop hangers. Also known as pipe shields.

Adhesive Mount—Attach the cradle to the pipe's insulation with an adhesive strip.

Clip-On Mount—Clip the tabs of the cradle directly onto the bottom of a loop hanger.

	ID
	Inch	Metric, mm	Lg.	Wd.	Ht.	Thk.		Each
Adhesive Mount







				Galvanized Steel

				1 7/8"	48	12"	2"	1"	1/32"	9164T11	00000


				2 3/8"	60	12"	2 1/2"	1 1/4"	1/32"	9164T13	0000
				2 7/8"	73	12"	3"	1 1/2"	1/32"	9164T15	0000
				3 1/2"	89	12"	3 1/2"	1 3/4"	1/32"	9164T17	0000
				4"	102	12"	4"	2"	1/32"	9164T21	0000
				4 1/2"	114	12"	4 1/2"	2 1/4"	1/32"	9164T23	0000


				Clip-On Mount







								Zinc-Plated Steel

								1 7/8"	48	12"	2"	1"	3/64"	2620N11	00000


								2 3/8"	60	12"	2 1/2"	1 1/4"	3/64"	2620N12	00000
								2 7/8"	73	12"	3"	1 1/2"	3/64"	2620N13	00000
								3 1/2"	89	12"	3 5/8"	1 13/16"	3/64"	2620N14	00000
								4"	102	12"	4 1/8"	2 1/16"	3/64"	2620N15	00000
								4 1/2"	114	12"	4 5/8"	2 5/16"	3/64"	2620N16	00000

Drain, Waste, and Vent Iron and Steel Pipe Fittings

Use these fittings in gravity-flow applications both above and below ground. They are also known as no-hub pipe fittings and soil pipe fittings. To connect, place the end of the fitting against your pipe or another fitting and connect with a low-pressure clamp-on connector (sold separately). The clamp-on connector is also known as a no-hub coupling. Fittings are for use in noncorrosive environments.

Clamp Connectors

Clamp On

304 Stainless Steel—Fittings hold up in humid, damp, and washdown environments but will corrode if exposed to salt water or chemicals.

	Material	Max. Pressure @ Temp.	Sleeve Material		Each
Clamp On



	1 1/2	304 Stainless Steel	15 psi @ 72° F	Neoprene	6820K21	000000


	2	304 Stainless Steel	15 psi @ 72° F	Neoprene	6820K22	00000
	3	304 Stainless Steel	15 psi @ 72° F	Neoprene	6820K23	00000
	4	304 Stainless Steel	15 psi @ 72° F	Neoprene	6820K24	00000
	5	304 Stainless Steel	15 psi @ 72° F	Neoprene	6820K25	00000
	6	304 Stainless Steel	15 psi @ 72° F	Neoprene	6820K26	00000
	8	304 Stainless Steel	15 psi @ 72° F	Neoprene	6820K28	000000
	10	304 Stainless Steel	15 psi @ 72° F	Neoprene	6820K29	000000
	12	304 Stainless Steel	15 psi @ 72° F	Neoprene	6820K222	000000

Clamp Adapters

Clamp On ×

Clamp On

304 Stainless Steel—Fittings hold up in humid, damp, and washdown environments but will corrode if exposed to salt water or chemicals.

	Material	Max. Pressure @ Temp.	Sleeve Material		Each
Clamp On × Clamp On



	2	304 Stainless Steel	15 psi @ 72° F	Neoprene	6820K35	000000


	3	304 Stainless Steel	15 psi @ 72° F	Neoprene	6820K36	00000
	4	304 Stainless Steel	15 psi @ 72° F	Neoprene	6820K37	00000

Clamp Reducers

Clamp On × Clamp On

304 Stainless Steel—Fittings hold up in humid, damp, and washdown environments but will corrode if exposed to salt water or chemicals.

	For Pipe Size
	(A)	(B)	Material	Max. Pressure @ Temp.	Sleeve Material		Each
Clamp On × Clamp On



		2	1 1/2	304 Stainless Steel	15 psi @ 72° F	Neoprene	6820K41	000000


		3	2	304 Stainless Steel	15 psi @ 72° F	Neoprene	6820K42	00000
		4	3	304 Stainless Steel	15 psi @ 72° F	Neoprene	6820K43	00000

Routing S-Hooks

Hang these S-hooks from fencing and railing to route large bundles of material, such as cable, hose, and wire through your facility or worksite to avoid tripping hazards.

Rounded Hook

PVC-Coated Steel—PVC-coated steel hooks won’t scratch the hanging surface or routed material.

										Each
	Total No. of Bottom Hooks	For Max. Bundle Dia.	Thk.	Usable Lg.	Top Hook Opening Wd. × Inside Wd.	Bottom Hook Opening Wd. × Inside Wd. (No. of)	Temp. Range, ° F	Wt. Cap., lb.		1-19	20-99	100-Up
PVC-Coated Steel—Orange



		1	3"	9/16"	7 15/16"	2" × 2 1/4"	2 1/2" × 3" (1)	0 to 125	125	2645N12	000000	000000	00000


		1	4"	11/16"	9 11/16"	2 7/8" × 3"	3" × 4" (1)	0 to 125	150	2645N11	00000	00000	00000
		1	5"	11/16"	10 11/16"	2 7/8" × 3"	4" × 5" (1)	0 to 125	160	2645N13	00000	00000	00000

Wire-Mount Routing Rings

Hang cable and other flexible material beneath wire to prevent it from sagging and swaying. Rings are made of rigid, plastic-coated steel. The plastic coating prevents damage to wire and cable. To install, hook the two ends of the ring around the wire—no fasteners required.

For Max.			Coating				Overall
Bundle Dia.	Wire Dia.	Material	Material	Color	Temp. Range, ° F	Wt. Cap., lb.	Lg.	Ht.		Each



	2 1/4"	3/8"	Galvanized Steel	PVC	Black	0 to 125	285	3 3/4"	4 1/8"	2647N11	000000


	3"	3/8"	Galvanized Steel	PVC	Black	0 to 125	300	4 3/4"	5"	2647N12	00000

Strut Channel Routing Clamps


Clamp Shown Installed	Style 1

Run pipe, conduit, and tubing through your facility by attaching it to strut channel. Since you don’t have to drill into beams and walls, it's easy to reconfigure setups as needed. Just slide clamps into the end of channel and tighten the screw.

PVC-Coated Steel—With a layer of PVC, these won't wear or cut into PVC-coated conduit and tubing. This keeps the coating intact to prevent rust and extend the life of conduit in high-vibration environments.

	ID
	Inch	Metric, mm	For Pipe Size	For Channel Wd.	Lg.	Wd.	Ht.	Thk.	Wt. Cap., lb.		Each
Style 1







				PVC-Coated Steel

				5/8"	16	1/2	1 5/8"	3/4"	1 1/4"	2 3/16"	5/64"	400	3115T71	00000


				15/16"	24	3/4	1 5/8"	1 1/16"	1 1/4"	2 7/16"	1/16"	600	3115T72	0000
				1 3/16"	30	1	1 5/8"	1 5/16"	1 1/4"	2 11/16"	5/64"	600	3115T73	0000
				1 7/16"	37	1 1/4	1 5/8"	1 9/16"	1 1/4"	3 1/16"	5/64"	600	3115T74	0000
				1 11/16"	43	1 1/2	1 5/8"	1 7/8"	1 1/4"	3 5/16"	7/64"	800	3115T75	0000
				2 3/16"	56	2	1 5/8"	2 3/8"	1 1/4"	3 3/4"	7/64"	800	3115T76	0000
				3 1/2"	88	3	1 5/8"	3 11/16"	1 1/4"	5 1/4"	7/64"	800	3115T551	00000
				4 1/2"	114	4	1 5/8"	4 3/4"	1 1/4"	6 1/4"	1/8"	1,000	3115T552	00000
				6 5/8"	168	6	1 5/8"	6 7/8"	1 1/4"	8 7/8"	9/64"	1,000	3115T553	00000