Finish Finish |
|---|
|
For Use With For Use With |
|---|
Performance Properties Performance Properties |
|---|
|
Clarity Clarity |
|---|
|
Flexibility Flexibility |
|---|
 | Semi-Rigid |
Inside Corner Shape Inside Corner Shape |
|---|
|
Outside Corner Shape Outside Corner Shape |
|---|
|
Maximum Temperature Maximum Temperature |
|---|
|
Density Density |
|---|
|
Flexural Modulus Flexural Modulus |
|---|
|
Tensile Strength Tensile Strength |
|---|
|
Texture Texture |
|---|
 | Smooth |
Friction Rating Friction Rating |
|---|
|
Tolerance Rating Tolerance Rating |
|---|
|
About Plastic
More
Chemical-Resistant PVC Tubes
When working near chemicals such as acids and alkalies, these tubes offer 360° protection to wires, cords, and anything that can slide through them. They’re made of PVC Type 1, a material that’s easy to thermoform, plus it is an excellent insulator. These tubes are oversized on the outside and undersized on the inside to allow for finishing to the sizes listed.
- Color: Gray
- Temperature Range: 5° to 140° F
- Tensile Strength: 7,000-7,800 psi (Good)
- Impact Strength: 0.7-3 ft.-lbs./in. (Poor)
- Hardness: Rockwell R110-R120 (Hard)
- For Use Outdoors: No
- Specifications Met: UL 94V0
Outside | Inside | 5 ft. Lg. | |||||
|---|---|---|---|---|---|---|---|
| Ht. | Ht. Tolerance | Wd. | Wd. Tolerance | Ht. | Wd. | Each | |
0.06" Wall Thick. (0" to 0.006") | |||||||
| 3/4" | -0.020" to 0.020" | 3/4" | -0.020" to 0.020" | 0.63" | 0.63" | 00000000 | 000000 |
0.078" Wall Thick. (0" to 0.008") | |||||||
| 1" | -0.020" to 0.020" | 1" | -0.020" to 0.020" | 0.844" | 0.844" | 00000000 | 00000 |
| 1" | -0.020" to 0.020" | 2" | -0.020" to 0.020" | 0.922" | 1.922" | 00000000 | 00000 |
| 1 3/8" | -0.020" to 0.020" | 1 3/8" | -0.020" to 0.020" | 1.219" | 1.219" | 00000000 | 00000 |
| 2" | -0.039" to 0.039" | 2" | -0.039" to 0.039" | 1.844" | 1.844" | 00000000 | 00000 |
| 3" | -0.039" to 0.039" | 3" | -0.039" to 0.039" | 2.844" | 2.844" | 00000000 | 00000 |
0.098" Wall Thick. (0" to 0.01") | |||||||
| 1 3/8" | -0.020" to 0.020" | 2 3/4" | -0.020" to 0.020" | 1.277" | 2.652" | 00000000 | 00000 |
| 1 3/8" | -0.020" to 0.020" | 3.346" | -0.020" to 0.020" | 1.277" | 3.248" | 00000000 | 00000 |
| 2" | -0.039" to 0.039" | 4" | -0.039" to 0.039" | 1.902" | 3.902" | 00000000 | 00000 |
| 2.283" | -0.039" to 0.039" | 3 3/8" | -0.039" to 0.039" | 2.188" | 3.277" | 00000000 | 00000 |
0.118" Wall Thick. (0" to 0.012") | |||||||
| 7/8" | -0.020" to 0.020" | 7/8" | -0.020" to 0.020" | 0.639" | 0.639" | 00000000 | 00000 |
T-Slotted Framing Cable Holders and Duct
Route wires, cables, and tubing along T-slotted rails.
For technical drawings and 3-D models, click on a part number.
Wire duct mounts to a T-slot with the included clips. Lay bundles of cable, wire, and tube in the duct, then snap on the cover to create an enclosed raceway.
T-Slotted Framing Panels and Doors
Add panels to T-slotted framing to create machine guards, strip doors, and welding curtains.
For technical drawings and 3-D models, click on a part number.
Opening | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Lg. | Wd. | Color | Material | Wire Dia. | Shape | Lg. | Wd. | Each | |
Mesh | |||||||||
| 2ft. | 2ft. | Black | PVC Coated Steel | 1/8" | Square | 1" | 1" | 000000000 | 000000 |
| 2ft. | 2ft. | Yellow | PVC Coated Steel | 1/8" | Square | 1" | 1" | 000000000 | 00000 |
| 4ft. | 2ft. | Black | PVC Coated Steel | 1/8" | Square | 1" | 1" | 000000000 | 00000 |
| 4ft. | 2ft. | Yellow | PVC Coated Steel | 1/8" | Square | 1" | 1" | 000000000 | 00000 |
| 4ft. | 4ft. | Black | PVC Coated Steel | 1/8" | Square | 1" | 1" | 000000000 | 00000 |
| 4ft. | 4ft. | Yellow | PVC Coated Steel | 1/8" | Square | 1" | 1" | 000000000 | 00000 |
| 8ft. | 4ft. | Black | PVC Coated Steel | 1/8" | Square | 1" | 1" | 000000000 | 00000 |
| 8ft. | 4ft. | Yellow | PVC Coated Steel | 1/8" | Square | 1" | 1" | 000000000 | 00000 |
Strip doors are sized to fit short openings and allow access while keeping dirt, dust, and debris out. They snap into the rail.
For Rail Ht. | Strips | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Single | Double, Quad | Triple | Wd. | Ht. | No. of | Wd. | Thick. | Color | Material | Each | |
| 1" | 2" | 3" | 36" | 36" | 9 | 4" | 0.06" | Clear | PVC Plastic | 000000000 | 000000 |
| 1" | 2" | 3" | 48" | 36" | 12 | 4" | 0.06" | Clear | PVC Plastic | 000000000 | 00000 |
| 1" | 2" | 3" | 48" | 48" | 12 | 4" | 0.06" | Clear | PVC Plastic | 000000000 | 00000 |
| 1" | 2" | 3" | 60" | 36" | 15 | 4" | 0.06" | Clear | PVC Plastic | 000000000 | 00000 |
| 1" | 2" | 3" | 60" | 60" | 15 | 4" | 0.06" | Clear | PVC Plastic | 000000000 | 000000 |
Welding curtains shield workers while allowing them to see and be seen. They filter UV light and protect against welding spatter. Curtains have perforated strips and can be torn to use as a strip door. They snap into the rail.
For Rail Ht. | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Single | Double, Quad | Triple | Wd. | Ht. | Thick. | Color | Material | Each | |
Welding Curtain | |||||||||
| 1" | 2" | 3" | 36" | 36" | 0.04" | Red | PVC Plastic | 000000000 | 0000000 |
T-Slotted Framing Storage Components
Stay organized with these storage components that work with T-slotted framing.
For technical drawings and 3-D models, click on a part number.
For Rail Ht | ||||||||
|---|---|---|---|---|---|---|---|---|
| Single | Double, Quad | Triple | Projection | Material | Color | Mounting Fasteners Included | Each | |
Hook | ||||||||
| 1 1/2", 40mm | 3", 80mm | 4 1/2" | 4 3/4" | PVC Coated Steel | Black | Yes | 000000000 | 000000 |
Shelves, trays, baskets, and label holders snap into the rail.
T-Slotted Framing Caps, Covers, and Seals
Seal T-slots, rail ends, and gaps between rails to keep out dust, debris, and other contaminants.
Bulb and brush seals cover door gaps to keep out air and dust. Press them into a T-slot.