Captive Panel Screw Type Captive PanelScrew Type | Show |
|---|
|
Captive Panel Screw Type Captive Panel Screw Type | Hide |
|---|
|
|
Nut Type Nut Type |
|---|
 |  |
| Rivet Mount | Clip On |
 | |
| Press Fit |
Retainer Material Retainer Material |
|---|
|
System of Measurement System of Measurement |
|---|
|
For Maximum Total Panel Thickness For Maximum TotalPanel Thickness |
|---|
|
|
|
For Minimum Total Panel Thickness For Minimum TotalPanel Thickness |
|---|
|
|
|
Thumb Screw Head Shape Thumb Screw Head Shape |
|---|
 | Wing |
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement)  |
|---|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
|---|
|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
|---|
|
Finish Finish |
|---|
|
Rounded Head Quarter-Turn Captive Panel Screws with Rivet-Mount Nut
Rivet-mount nuts can be riveted into thin panels for a flush fit. They can be mounted without spaces between the panels. A quarter-turn locks and releases access panels, doors, and covers. The screw is held to the outer panel by a retainer. Rivets not included. Install with 3/32" rivets in steel and 1/8" rivets in plastic. Length is measured from under the screw head.
Zinc-plated steel nuts and screws are corrosion resistant in wet environments. An installation tool (sold separately) is required to install the retainer.
Acetal plastic nuts and screws are chemical resistant and lightweight.
For technical drawings and 3-D models, click on a part number.
For Panel Hole Dia. | Head | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Total Panel Thick. | Inner | Outer | Dia. | Ht. | Lg. | Nut Wd. | Shank Dia. | Mounting Hole Ctr.-to-Ctr. | Retainer Material | Temperature Range, °F | Color | Each | |
Slotted | |||||||||||||
Zinc-Plated Steel | |||||||||||||
| 0.15" to 0.17" | 0.44" | 0.24" | 0.375" | 0.09" | 0.46" | 0.38" | 0.198" | 0.75" | 18-8 Stainless Steel | __ | __ | 000000000 | 00000 |
| 0.17" to 0.19" | 0.44" | 0.24" | 0.375" | 0.09" | 0.48" | 0.38" | 0.198" | 0.75" | 18-8 Stainless Steel | __ | __ | 000000000 | 0000 |
| 0.19" to 0.21" | 0.44" | 0.24" | 0.375" | 0.09" | 0.5" | 0.38" | 0.198" | 0.75" | 18-8 Stainless Steel | __ | __ | 000000000 | 0000 |
| 0.21" to 0.23" | 0.44" | 0.24" | 0.375" | 0.09" | 0.52" | 0.38" | 0.198" | 0.75" | 18-8 Stainless Steel | __ | __ | 000000000 | 0000 |
| 0.23" to 0.25" | 0.44" | 0.24" | 0.375" | 0.09" | 0.54" | 0.38" | 0.198" | 0.75" | 18-8 Stainless Steel | __ | __ | 000000000 | 0000 |
| 0.25" to 0.27" | 0.44" | 0.24" | 0.375" | 0.09" | 0.56" | 0.38" | 0.198" | 0.75" | 18-8 Stainless Steel | __ | __ | 000000000 | 0000 |
Acetal Plastic | |||||||||||||
| 0.15" to 0.2" | 0.438" | 0.39" | 0.625" | 0.13" | 0.85" | 0.5" | 0.25" | 0.875" | Acetal Plastic | -40° to 190° | Black | 000000000 | 0000 |
| 0.2" to 0.25" | 0.438" | 0.39" | 0.625" | 0.13" | 0.9" | 0.5" | 0.25" | 0.875" | Acetal Plastic | -40° to 190° | Black | 000000000 | 0000 |
| 0.3" to 0.35" | 0.438" | 0.39" | 0.625" | 0.13" | 1" | 0.5" | 0.25" | 0.875" | Acetal Plastic | -40° to 190° | Black | 000000000 | 0000 |
| 0.4" to 0.45" | 0.438" | 0.39" | 0.625" | 0.13" | 1.1" | 0.5" | 0.25" | 0.875" | Acetal Plastic | -40° to 190° | Black | 000000000 | 0000 |
Phillips | |||||||||||||
Zinc-Plated Steel | |||||||||||||
| 0.15" to 0.17" | 0.44" | 0.24" | 0.375" | 0.09" | 0.46" | 0.38" | 0.198" | 0.75" | 18-8 Stainless Steel | __ | __ | 000000000 | 0000 |
| 0.17" to 0.19" | 0.44" | 0.24" | 0.375" | 0.09" | 0.48" | 0.38" | 0.198" | 0.75" | 18-8 Stainless Steel | __ | __ | 000000000 | 0000 |
| 0.19" to 0.21" | 0.44" | 0.24" | 0.375" | 0.09" | 0.5" | 0.38" | 0.198" | 0.75" | 18-8 Stainless Steel | __ | __ | 000000000 | 0000 |
| 0.21" to 0.23" | 0.44" | 0.24" | 0.375" | 0.09" | 0.52" | 0.38" | 0.198" | 0.75" | 18-8 Stainless Steel | __ | __ | 000000000 | 0000 |
| 0.23" to 0.25" | 0.44" | 0.24" | 0.375" | 0.09" | 0.54" | 0.38" | 0.198" | 0.75" | 18-8 Stainless Steel | __ | __ | 000000000 | 0000 |
| 0.25" to 0.27" | 0.44" | 0.24" | 0.375" | 0.09" | 0.56" | 0.38" | 0.198" | 0.75" | 18-8 Stainless Steel | __ | __ | 000000000 | 0000 |
Wing Head Quarter-Turn Captive Panel Screws with Rivet-Mount Nut
Rivet these nuts into thin panels for a flush fit. They can be mounted without space between panels. A quarter-turn locks and releases access panels, doors, and covers. The screw is held to the outer panel by a retainer. Rivets not included. Install with 3/32" rivets in steel and 1/8" rivets in plastic. Length is measured from under the screw head.
Zinc-plated steel nuts and screws are corrosion resistant in wet environments. An installation tool (sold separately) is required to install the retainer.
Acetal plastic nuts and screws are chemical resistant and lightweight.
For technical drawings and 3-D models, click on a part number.
For Panel Hole Dia. | Head | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Total Panel Thick. | Inner | Outer | Wd. | Ht. | Lg. | Nut Wd. | Shank Dia. | Mounting Hole Ctr.-to-Ctr. | Retainer Material | Temperature Range, °F | Color | Each | |
Zinc-Plated Steel | |||||||||||||
| 0.15" to 0.17" | 0.44" | 0.24" | 0.88" | 0.44" | 0.46" | 0.38" | 0.198" | 0.75" | 18-8 Stainless Steel | __ | __ | 000000000 | 00000 |
| 0.17" to 0.19" | 0.44" | 0.24" | 0.88" | 0.44" | 0.48" | 0.38" | 0.198" | 0.75" | 18-8 Stainless Steel | __ | __ | 000000000 | 0000 |
| 0.19" to 0.21" | 0.44" | 0.24" | 0.88" | 0.44" | 0.5" | 0.38" | 0.198" | 0.75" | 18-8 Stainless Steel | __ | __ | 000000000 | 0000 |
| 0.21" to 0.23" | 0.44" | 0.24" | 0.88" | 0.44" | 0.52" | 0.38" | 0.198" | 0.75" | 18-8 Stainless Steel | __ | __ | 000000000 | 0000 |
| 0.23" to 0.25" | 0.44" | 0.24" | 0.88" | 0.44" | 0.54" | 0.38" | 0.198" | 0.75" | 18-8 Stainless Steel | __ | __ | 000000000 | 0000 |
| 0.25" to 0.27" | 0.44" | 0.24" | 0.88" | 0.44" | 0.56" | 0.38" | 0.198" | 0.75" | 18-8 Stainless Steel | __ | __ | 000000000 | 0000 |
Acetal Plastic | |||||||||||||
| 0.25" to 0.3" | 0.438" | 0.39" | 1.1" | 0.43" | 0.95" | 0.5" | 0.25" | 0.875" | Acetal Plastic | -40° to 190° | Black | 000000000 | 0000 |
| 0.3" to 0.35" | 0.438" | 0.39" | 1.1" | 0.43" | 1" | 0.5" | 0.25" | 0.875" | Acetal Plastic | -40° to 190° | Black | 000000000 | 0000 |
| 0.4" to 0.45" | 0.438" | 0.39" | 1.1" | 0.43" | 1.1" | 0.5" | 0.25" | 0.875" | Acetal Plastic | -40° to 190° | Black | 000000000 | 0000 |
Wing Head Quarter-Turn Captive Panel Screws with Clip-On Nut
A clip-on nut allows you to mount the screw near the edge of a thin panel. Lock and release access panels, doors, and covers with a quarter-turn. The screw is held to the outer panel by a retainer. Length is measured from under the screw head.
Zinc-plated steel nuts and screws are corrosion resistant in wet environments. An installation tool (sold separately) is required to install the retainer.
Acetal plastic nuts and screws are chemical resistant and lightweight.
For technical drawings and 3-D models, click on a part number.
For Panel Thick. | Head | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Inner | Total | For Hole Dia. | Wd. | Ht. | Lg. | Nut Wd. | Shank Dia. | Retainer Material | Temperature Range, °F | Color | Each | |
Zinc-Plated Steel | ||||||||||||
| 0.02" to 0.114" | 0.15" to 0.17" | 0.312" | 0.88" | 0.44" | 0.46" | 0.63" | 0.198" | 18-8 Stainless Steel | __ | __ | 000000000 | 00000 |
| 0.02" to 0.134" | 0.17" to 0.19" | 0.312" | 0.88" | 0.44" | 0.48" | 0.63" | 0.198" | 18-8 Stainless Steel | __ | __ | 000000000 | 0000 |
| 0.02" to 0.154" | 0.19" to 0.21" | 0.312" | 0.88" | 0.44" | 0.5" | 0.63" | 0.198" | 18-8 Stainless Steel | __ | __ | 000000000 | 0000 |
| 0.02" to 0.174" | 0.21" to 0.23" | 0.312" | 0.88" | 0.44" | 0.52" | 0.63" | 0.198" | 18-8 Stainless Steel | __ | __ | 000000000 | 0000 |
| 0.02" to 0.194" | 0.23" to 0.25" | 0.312" | 0.88" | 0.44" | 0.54" | 0.63" | 0.198" | 18-8 Stainless Steel | __ | __ | 000000000 | 0000 |
| 0.02" to 0.214" | 0.25" to 0.27" | 0.312" | 0.88" | 0.44" | 0.56" | 0.63" | 0.198" | 18-8 Stainless Steel | __ | __ | 000000000 | 0000 |
Acetal Plastic | ||||||||||||
| 0.03" to 0.09" | 0.29" to 0.34" | 0.512" | 1.1" | 0.43" | 0.95" | 0.945" | 0.25" | Acetal Plastic | -40° to 190° | Black | 000000000 | 0000 |
| 0.03" to 0.09" | 0.34" to 0.39" | 0.512" | 1.1" | 0.43" | 1" | 0.945" | 0.25" | Acetal Plastic | -40° to 190° | Black | 000000000 | 0000 |
| 0.03" to 0.09" | 0.44" to 0.49" | 0.512" | 1.1" | 0.43" | 1.1" | 0.945" | 0.25" | Acetal Plastic | -40° to 190° | Black | 000000000 | 0000 |
Rounded Head Quarter-Turn Captive Panel Screws with Clip-On Nut
The nut clips onto the edge of a thin panel, allowing you to mount the screw near edges. A quarter-turn locks and releases access panels, doors, and covers. The screw is held to the outer panel by a retainer. Length is measured from under the screw head.
Zinc-plated steel nuts and screws are corrosion resistant in wet environments. An installation tool (sold separately) is required to install the retainer.
Acetal plastic nuts and screws are chemical resistant and lightweight.
For technical drawings and 3-D models, click on a part number.
For Panel Thick. | Head | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Inner | Total | For Hole Dia. | For Min. Space Between Panels | Dia. | Ht. | Lg. | Nut Wd. | Shank Dia. | Retainer Material | Temperature Range, °F | Color | Each | |
Slotted | |||||||||||||
Zinc-Plated Steel | |||||||||||||
| 0.02" to 0.114" | 0.15" to 0.17" | 0.312" | 0.026" | 0.375" | 0.09" | 0.46" | 0.63" | 0.198" | 18-8 Stainless Steel | __ | __ | 000000000 | 00000 |
| 0.02" to 0.134" | 0.17" to 0.19" | 0.312" | 0.026" | 0.375" | 0.09" | 0.48" | 0.63" | 0.198" | 18-8 Stainless Steel | __ | __ | 000000000 | 0000 |
| 0.02" to 0.154" | 0.19" to 0.21" | 0.312" | 0.026" | 0.375" | 0.09" | 0.5" | 0.63" | 0.198" | 18-8 Stainless Steel | __ | __ | 000000000 | 0000 |
| 0.02" to 0.174" | 0.21" to 0.23" | 0.312" | 0.026" | 0.375" | 0.09" | 0.52" | 0.63" | 0.198" | 18-8 Stainless Steel | __ | __ | 000000000 | 0000 |
| 0.02" to 0.194" | 0.23" to 0.25" | 0.312" | 0.026" | 0.375" | 0.09" | 0.54" | 0.63" | 0.198" | 18-8 Stainless Steel | __ | __ | 000000000 | 0000 |
| 0.02" to 0.214" | 0.25" to 0.27" | 0.312" | 0.026" | 0.375" | 0.09" | 0.56" | 0.63" | 0.198" | 18-8 Stainless Steel | __ | __ | 000000000 | 0000 |
Acetal Plastic | |||||||||||||
| 0.03" to 0.09" | 0.19" to 0.24" | 0.512" | 0.04" | 0.625" | 0.13" | 0.85" | 0.945" | 0.25" | Acetal Plastic | -40° to 190° | Black | 000000000 | 0000 |
| 0.03" to 0.09" | 0.24" to 0.29" | 0.512" | 0.04" | 0.625" | 0.13" | 0.9" | 0.945" | 0.25" | Acetal Plastic | -40° to 190° | Black | 000000000 | 0000 |
| 0.03" to 0.09" | 0.34" to 0.39" | 0.512" | 0.04" | 0.625" | 0.13" | 1" | 0.945" | 0.25" | Acetal Plastic | -40° to 190° | Black | 000000000 | 0000 |
| 0.03" to 0.09" | 0.44" to 0.49" | 0.512" | 0.04" | 0.625" | 0.13" | 1.1" | 0.945" | 0.25" | Acetal Plastic | -40° to 190° | Black | 000000000 | 0000 |
Phillips | |||||||||||||
Zinc-Plated Steel | |||||||||||||
| 0.02" to 0.114" | 0.15" to 0.17" | 0.312" | 0.026" | 0.375" | 0.09" | 0.46" | 0.63" | 0.198" | 18-8 Stainless Steel | __ | __ | 000000000 | 0000 |
| 0.02" to 0.134" | 0.17" to 0.19" | 0.312" | 0.026" | 0.375" | 0.09" | 0.48" | 0.63" | 0.198" | 18-8 Stainless Steel | __ | __ | 000000000 | 0000 |
| 0.02" to 0.154" | 0.19" to 0.21" | 0.312" | 0.026" | 0.375" | 0.09" | 0.5" | 0.63" | 0.198" | 18-8 Stainless Steel | __ | __ | 000000000 | 0000 |
| 0.02" to 0.174" | 0.21" to 0.23" | 0.312" | 0.026" | 0.375" | 0.09" | 0.52" | 0.63" | 0.198" | 18-8 Stainless Steel | __ | __ | 000000000 | 0000 |
| 0.02" to 0.194" | 0.23" to 0.25" | 0.312" | 0.026" | 0.375" | 0.09" | 0.54" | 0.63" | 0.198" | 18-8 Stainless Steel | __ | __ | 000000000 | 0000 |
| 0.02" to 0.214" | 0.25" to 0.27" | 0.312" | 0.026" | 0.375" | 0.09" | 0.56" | 0.63" | 0.198" | 18-8 Stainless Steel | __ | __ | 000000000 | 0000 |
Rounded Head Quarter-Turn Captive Panel Screws with Back Press-Fit Nut
Press these nuts into the backside of a panel in applications where you have access to both sides of the panel. Install with an arbor press or similar pressure tool. A quarter-turn locks and releases access panels, doors, and covers. The screw is held to the outer panel by a retainer. An installation tool (sold separately) is required to install the retainer. Nuts and screws have a zinc plating that provides corrosion resistance in wet environments. Length is measured from under the screw head.
For technical drawings and 3-D models, click on a part number.
For Panel Thick. | Head | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Total | Min. Inner | For Inner Panel Hole Dia. | For Min. Space Between Panels | Dia. | Ht. | Lg. | Nut Dia. | Shank Dia. | Retainer Material | Each | |
Slotted | |||||||||||
Zinc-Plated Steel | |||||||||||
| 0.05" to 0.07" | 0.037" | 0.437" | 0.01" | 0.375" | 0.09" | 0.46" | 0.54" | 0.198" | 18-8 Stainless Steel | 000000000 | 00000 |
| 0.07" to 0.09" | 0.037" | 0.437" | 0.01" | 0.375" | 0.09" | 0.48" | 0.54" | 0.198" | 18-8 Stainless Steel | 000000000 | 0000 |
| 0.09" to 0.11" | 0.037" | 0.437" | 0.01" | 0.375" | 0.09" | 0.5" | 0.54" | 0.198" | 18-8 Stainless Steel | 000000000 | 0000 |
| 0.11" to 0.13" | 0.037" | 0.437" | 0.01" | 0.375" | 0.09" | 0.52" | 0.54" | 0.198" | 18-8 Stainless Steel | 000000000 | 0000 |
| 0.13" to 0.15" | 0.037" | 0.437" | 0.01" | 0.375" | 0.09" | 0.54" | 0.54" | 0.198" | 18-8 Stainless Steel | 000000000 | 0000 |
| 0.15" to 0.17" | 0.037" | 0.437" | 0.01" | 0.375" | 0.09" | 0.56" | 0.54" | 0.198" | 18-8 Stainless Steel | 000000000 | 0000 |
Phillips | |||||||||||
Zinc-Plated Steel | |||||||||||
| 0.05" to 0.07" | 0.037" | 0.437" | 0.01" | 0.375" | 0.09" | 0.46" | 0.54" | 0.198" | 18-8 Stainless Steel | 000000000 | 0000 |
| 0.07" to 0.09" | 0.037" | 0.437" | 0.01" | 0.375" | 0.09" | 0.48" | 0.54" | 0.198" | 18-8 Stainless Steel | 000000000 | 0000 |
| 0.09" to 0.11" | 0.037" | 0.437" | 0.01" | 0.375" | 0.09" | 0.5" | 0.54" | 0.198" | 18-8 Stainless Steel | 000000000 | 0000 |
| 0.11" to 0.13" | 0.037" | 0.437" | 0.01" | 0.375" | 0.09" | 0.52" | 0.54" | 0.198" | 18-8 Stainless Steel | 000000000 | 0000 |
| 0.13" to 0.15" | 0.037" | 0.437" | 0.01" | 0.375" | 0.09" | 0.54" | 0.54" | 0.198" | 18-8 Stainless Steel | 000000000 | 0000 |
| 0.15" to 0.17" | 0.037" | 0.437" | 0.01" | 0.375" | 0.09" | 0.56" | 0.54" | 0.198" | 18-8 Stainless Steel | 000000000 | 0000 |
Wing Head Quarter-Turn Captive Panel Screws with Back Press-Fit Nut
Press these nuts into the backside of a panel in applications where you have access to both sides of the panel. Install with an arbor press or similar pressure tool. A quarter-turn locks and releases access panels, doors, and covers. The screw is held to the outer panel by a retainer. An installation tool (sold separately) is required to install the retainer. Nuts and screws have a zinc plating that provides corrosion resistance in wet environments. Length is measured from under the screw head.
For technical drawings and 3-D models, click on a part number.
For Panel Thick. | Head | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Total | Min. Inner | For Inner Panel Hole Dia. | For Min. Space Between Panels | Wd. | Ht. | Lg. | Nut Dia. | Shank Dia. | Retainer Material | Each | |
Zinc-Plated Steel | |||||||||||
| 0.05" to 0.07" | 0.037" | 0.437" | 0.01" | 0.88" | 0.44" | 0.46" | 0.54" | 0.198" | 18-8 Stainless Steel | 000000000 | 00000 |
| 0.07" to 0.09" | 0.037" | 0.437" | 0.01" | 0.88" | 0.44" | 0.48" | 0.54" | 0.198" | 18-8 Stainless Steel | 000000000 | 0000 |
| 0.09" to 0.11" | 0.037" | 0.437" | 0.01" | 0.88" | 0.44" | 0.5" | 0.54" | 0.198" | 18-8 Stainless Steel | 000000000 | 0000 |
| 0.11" to 0.13" | 0.037" | 0.437" | 0.01" | 0.88" | 0.44" | 0.52" | 0.54" | 0.198" | 18-8 Stainless Steel | 000000000 | 0000 |
| 0.13" to 0.15" | 0.037" | 0.437" | 0.01" | 0.88" | 0.44" | 0.54" | 0.54" | 0.198" | 18-8 Stainless Steel | 000000000 | 0000 |
| 0.15" to 0.17" | 0.037" | 0.437" | 0.01" | 0.88" | 0.44" | 0.56" | 0.54" | 0.198" | 18-8 Stainless Steel | 000000000 | 0000 |
Wing Head Quarter-Turn Captive Panel Screws with Front Press-Fit Nut
Press these nuts into a closed-end hole or thick panel in applications where the back of the panel is inaccessible. Install with an arbor press or similar pressure tool. A quarter-turn locks and releases access panels, doors, and covers. The screw is held to the outer panel by a retainer. An installation tool (sold separately) is required to install the retainer. Nuts and screws have a zinc plating to resist corrosion in wet environments. Length is measured from under the screw head.
For technical drawings and 3-D models, click on a part number.
For Inner Panel | Head | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| For Installation Thick. | Min. Thick. | Hole Dia. | For Min. Space Between Panels | Wd. | Ht. | Lg. | Nut Dia. | Shank Dia. | Retainer Material | Each | |
Zinc-Plated Steel | |||||||||||
| 0.01"-0.03" | 0.08" | 0.469" | 0.01" | 0.88" | 0.44" | 0.46" | 0.465" | 0.198" | 18-8 Stainless Steel | 000000000 | 00000 |
| 0.03"-0.05" | 0.08" | 0.469" | 0.01" | 0.88" | 0.44" | 0.48" | 0.465" | 0.198" | 18-8 Stainless Steel | 000000000 | 0000 |
| 0.05"-0.07" | 0.08" | 0.469" | 0.01" | 0.88" | 0.44" | 0.5" | 0.465" | 0.198" | 18-8 Stainless Steel | 000000000 | 0000 |
| 0.07"-0.09" | 0.08" | 0.469" | 0.01" | 0.88" | 0.44" | 0.52" | 0.465" | 0.198" | 18-8 Stainless Steel | 000000000 | 0000 |
| 0.09"-0.11" | 0.08" | 0.469" | 0.01" | 0.88" | 0.44" | 0.54" | 0.465" | 0.198" | 18-8 Stainless Steel | 000000000 | 0000 |
| 0.11"-0.13" | 0.08" | 0.469" | 0.01" | 0.88" | 0.44" | 0.56" | 0.465" | 0.198" | 18-8 Stainless Steel | 000000000 | 0000 |
Rounded Head Quarter-Turn Captive Panel Screws with Front Press-Fit Nut
Press these nuts into a closed-end hole or thick panel in applications where the back of the panel is inaccessible. A quarter-turn locks and releases access panels, doors, and covers. The screw is held to the outer panel by a retainer. An installation tool (sold separately) is required to install the retainer. Nuts and screws have a zinc plating to resist corrosion in wet environments. Length is measured from under the screw head.
For technical drawings and 3-D models, click on a part number.
For Inner Panel | Head | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| For Installation Thick. | Min. Thick. | Hole Dia. | For Min. Space Between Panels | Dia. | Ht. | Lg. | Nut Dia. | Shank Dia. | Retainer Material | Each | |
Slotted | |||||||||||
Zinc-Plated Steel | |||||||||||
| 0.01"-0.03" | 0.08" | 0.469" | 0.01" | 0.375" | 0.09" | 0.46" | 0.465" | 0.198" | 18-8 Stainless Steel | 000000000 | 00000 |
| 0.03"-0.05" | 0.08" | 0.469" | 0.01" | 0.375" | 0.09" | 0.48" | 0.465" | 0.198" | 18-8 Stainless Steel | 000000000 | 0000 |
| 0.05"-0.07" | 0.08" | 0.469" | 0.01" | 0.375" | 0.09" | 0.5" | 0.465" | 0.198" | 18-8 Stainless Steel | 000000000 | 0000 |
| 0.07"-0.09" | 0.08" | 0.469" | 0.01" | 0.375" | 0.09" | 0.52" | 0.465" | 0.198" | 18-8 Stainless Steel | 000000000 | 0000 |
| 0.09"-0.11" | 0.08" | 0.469" | 0.01" | 0.375" | 0.09" | 0.54" | 0.465" | 0.198" | 18-8 Stainless Steel | 000000000 | 0000 |
| 0.11"-0.13" | 0.08" | 0.469" | 0.01" | 0.375" | 0.09" | 0.56" | 0.465" | 0.198" | 18-8 Stainless Steel | 000000000 | 0000 |
Phillips | |||||||||||
Zinc-Plated Steel | |||||||||||
| 0.01"-0.03" | 0.08" | 0.469" | 0.01" | 0.375" | 0.09" | 0.46" | 0.465" | 0.198" | 18-8 Stainless Steel | 000000000 | 0000 |
| 0.03"-0.05" | 0.08" | 0.469" | 0.01" | 0.375" | 0.09" | 0.48" | 0.465" | 0.198" | 18-8 Stainless Steel | 000000000 | 0000 |
| 0.05"-0.07" | 0.08" | 0.469" | 0.01" | 0.375" | 0.09" | 0.5" | 0.465" | 0.198" | 18-8 Stainless Steel | 000000000 | 0000 |
| 0.07"-0.09" | 0.08" | 0.469" | 0.01" | 0.375" | 0.09" | 0.52" | 0.465" | 0.198" | 18-8 Stainless Steel | 000000000 | 0000 |
| 0.09"-0.11" | 0.08" | 0.469" | 0.01" | 0.375" | 0.09" | 0.54" | 0.465" | 0.198" | 18-8 Stainless Steel | 000000000 | 0000 |
| 0.11"-0.13" | 0.08" | 0.469" | 0.01" | 0.375" | 0.09" | 0.56" | 0.465" | 0.198" | 18-8 Stainless Steel | 000000000 | 0000 |