Collet Type Collet Type |
---|
![]() | R8 |
Size Size |
---|

For Holding For Holding |
---|
|
|
Face Type Face Type |
---|
![]() | Round |
For Use With For Use With |
---|
|
Internal Thread Size Internal Thread Size |
---|
|
Material Material |
---|
|
Body Diameter Body Diameter |
---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
---|
Shank Type Shank Type |
---|
![]() | R8 Taper |
Component Component |
---|
|
Collet Sizes Included Collet Sizes Included |
---|
|
|
|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
---|
|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
---|
|
R8 Collets

Use these collets to securely hold round-shank tool bits in the R8 spindle of a milling machine. They have internal threads.
For technical drawings and 3-D models, click on a part number.
Size | TIR (Total Indicated Runout) Accuracy | Workpiece Dia. Tolerance | Body Dia. | Overall Lg. | Internal Thread Size | Material | Each | |
Round | ||||||||
---|---|---|---|---|---|---|---|---|
1/16" | 0.0007" | -0.004" to 0" | 0.95" | 4.089" | 7/16"-20 | Steel | 0000000 | 000000 |
3/32" | 0.0007" | -0.004" to 0" | 0.95" | 4.089" | 7/16"-20 | Steel | 0000000 | 00000 |
1/8" | 0.0007" | -0.004" to 0" | 0.95" | 4.089" | 7/16"-20 | Steel | 0000000 | 00000 |
5/32" | 0.0007" | -0.004" to 0" | 0.95" | 4.089" | 7/16"-20 | Steel | 0000000 | 00000 |
3/16" | 0.0007" | -0.004" to 0" | 0.95" | 4.089" | 7/16"-20 | Steel | 0000000 | 00000 |
7/32" | 0.0007" | -0.004" to 0" | 0.95" | 4.089" | 7/16"-20 | Steel | 0000000 | 00000 |
1/4" | 0.0007" | -0.004" to 0" | 0.95" | 4.089" | 7/16"-20 | Steel | 0000000 | 00000 |
9/32" | 0.0007" | -0.004" to 0" | 0.95" | 4.089" | 7/16"-20 | Steel | 0000000 | 00000 |
5/16" | 0.0007" | -0.004" to 0" | 0.95" | 4.089" | 7/16"-20 | Steel | 0000000 | 00000 |
11/32" | 0.0007" | -0.004" to 0" | 0.95" | 4.089" | 7/16"-20 | Steel | 0000000 | 00000 |
3/8" | 0.0007" | -0.004" to 0" | 0.95" | 4.089" | 7/16"-20 | Steel | 0000000 | 00000 |
13/32" | 0.0011" | -0.004" to 0" | 0.95" | 4.089" | 7/16"-20 | Steel | 0000000 | 00000 |
7/16" | 0.0011" | -0.004" to 0" | 0.95" | 4.089" | 7/16"-20 | Steel | 0000000 | 00000 |
15/32" | 0.0011" | -0.004" to 0" | 0.95" | 4.089" | 7/16"-20 | Steel | 0000000 | 00000 |
1/2" | 0.0011" | -0.004" to 0" | 0.95" | 4.089" | 7/16"-20 | Steel | 0000000 | 00000 |
17/32" | 0.0011" | -0.004" to 0" | 0.95" | 4.089" | 7/16"-20 | Steel | 0000000 | 00000 |
9/16" | 0.0011" | -0.004" to 0" | 0.95" | 4.089" | 7/16"-20 | Steel | 0000000 | 00000 |
19/32" | 0.0011" | -0.004" to 0" | 0.95" | 4.089" | 7/16"-20 | Steel | 0000000 | 00000 |
5/8" | 0.0011" | -0.004" to 0" | 0.95" | 4.089" | 7/16"-20 | Steel | 0000000 | 00000 |
21/32" | 0.0011" | -0.004" to 0" | 0.95" | 4.089" | 7/16"-20 | Steel | 0000000 | 00000 |
11/16" | 0.0011" | -0.004" to 0" | 0.95" | 4.089" | 7/16"-20 | Steel | 0000000 | 00000 |
23/32" | 0.0011" | -0.004" to 0" | 0.95" | 4.089" | 7/16"-20 | Steel | 0000000 | 00000 |
3/4" | 0.0011" | -0.004" to 0" | 0.95" | 4.089" | 7/16"-20 | Steel | 0000000 | 00000 |
25/32" | 0.0011" | -0.004" to 0" | 0.95" | 4.089" | 7/16"-20 | Steel | 0000000 | 00000 |
13/16" | 0.0011" | -0.004" to 0" | 0.95" | 4.089" | 7/16"-20 | Steel | 0000000 | 00000 |
27/32" | 0.0011" | -0.004" to 0" | 0.95" | 4.089" | 7/16"-20 | Steel | 0000000 | 00000 |
7/8" | 0.0011" | -0.004" to 0" | 0.95" | 4.089" | 7/16"-20 | Steel | 0000000 | 00000 |
1" | 0.0011" | -0.004" to 0" | 0.95" | 4.7" | 7/16"-20 | Steel | 0000000 | 00000 |
3 mm | 0.0007" | -0.004" to 0" | 0.95" | 4.089" | 7/16"-20 | Steel | 0000000 | 00000 |
4 mm | 0.0007" | -0.004" to 0" | 0.95" | 4.089" | 7/16"-20 | Steel | 0000000 | 00000 |
5 mm | 0.0007" | -0.004" to 0" | 0.95" | 4.089" | 7/16"-20 | Steel | 0000000 | 00000 |
6 mm | 0.0007" | -0.004" to 0" | 0.95" | 4.089" | 7/16"-20 | Steel | 0000000 | 00000 |
7 mm | 0.0007" | -0.004" to 0" | 0.95" | 4.089" | 7/16"-20 | Steel | 0000000 | 00000 |
8 mm | 0.0007" | -0.004" to 0" | 0.95" | 4.089" | 7/16"-20 | Steel | 0000000 | 00000 |
9 mm | 0.0007" | -0.004" to 0" | 0.95" | 4.089" | 7/16"-20 | Steel | 0000000 | 00000 |
10 mm | 0.0007" | -0.004" to 0" | 0.95" | 4.089" | 7/16"-20 | Steel | 0000000 | 00000 |
11 mm | 0.0011" | -0.004" to 0" | 0.95" | 4.089" | 7/16"-20 | Steel | 0000000 | 00000 |
12 mm | 0.0011" | -0.004" to 0" | 0.95" | 4.089" | 7/16"-20 | Steel | 0000000 | 00000 |
13 mm | 0.0011" | -0.004" to 0" | 0.95" | 4.089" | 7/16"-20 | Steel | 0000000 | 00000 |
14 mm | 0.0011" | -0.004" to 0" | 0.95" | 4.089" | 7/16"-20 | Steel | 0000000 | 00000 |
15 mm | 0.0011" | -0.004" to 0" | 0.95" | 4.089" | 7/16"-20 | Steel | 0000000 | 00000 |
16 mm | 0.0011" | -0.004" to 0" | 0.95" | 4.089" | 7/16"-20 | Steel | 0000000 | 00000 |
17 mm | 0.0011" | -0.004" to 0" | 0.95" | 4.089" | 7/16"-20 | Steel | 0000000 | 00000 |
18 mm | 0.0011" | -0.004" to 0" | 0.95" | 4.089" | 7/16"-20 | Steel | 0000000 | 00000 |
19 mm | 0.0011" | -0.004" to 0" | 0.95" | 4.089" | 7/16"-20 | Steel | 0000000 | 00000 |
20 mm | 0.0011" | -0.004" to 0" | 0.95" | 4.089" | 7/16"-20 | Steel | 0000000 | 00000 |
R8 Collet Sets


Use these collets to securely hold round-shank tool bits in the R8 spindle of a milling machine. They have internal threads.
For technical drawings and 3-D models, click on a part number.
No. of Pieces | Collet Sizes Included | Workpiece Dia. Tolerance | Body Dia. | Overall Lg. | Internal Thread Size | Material | Set | |
Round | ||||||||
---|---|---|---|---|---|---|---|---|
8 | 1/8", 1/4", 3/8", 1/2", 5/8", 3/4", 7/8", 1" | 0" to -0.004" | 0.95" | 4.089" | 7/16"-20 | Steel | 0000000 | 0000000 |
13 | 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8" | 0" to -0.004" | 0.95" | 4.089" | 7/16"-20 | Steel | 0000000 | 000000 |
Collet Chucks

Securely hold collets in the spindle of a milling machine.
Use a nut wrench (sold separately) to tighten the chuck nut and secure the tool bit in the collet.
Quick-Change Tool Holders for Milling Machines

After installing the R8 body in the milling machine spindle, tool holders can be switched out in seconds. To remove a tool holder, depress the brass locking button and rotate the collar on the R8 body. When a new tool holder is inserted, a spring-loaded pin snaps the collar back into the locked position.

R8 Taper Shank Thread | ||||||
---|---|---|---|---|---|---|
TIR (Total Indicated Runout) Accuracy | Gender | Size | Spindle Overhang | Material | Each | |
0.0005" | Female | 7/16"-20 | 1 1/8" | Steel | 0000000 | 0000000 |

Head | For End Mill | ||||||
---|---|---|---|---|---|---|---|
Lg. | Dia. | Number of Milling Ends | Shank Type | Shank Dia. | Material | Each | |
1 3/8" | 1/2" | 1 | Straight | 1/8" | Steel | 0000000 | 0000000 |
1 3/8" | 11/16" | 1 | Straight | 3/16" | Steel | 0000000 | 000000 |
1 3/8" | 11/16" | 1 | Straight | 1/4" | Steel | 0000000 | 000000 |
1 3/8" | 1 3/16" | 1 | Straight | 3/8" | Steel | 0000000 | 000000 |
1 3/8" | 1 3/8" | 1 | Straight | 1/2" | Steel | 0000000 | 000000 |
1 5/8" | 1 9/16" | 1 | Straight | 5/8" | Steel | 0000000 | 000000 |
2 3/16" | 1 13/16" | 1 | Straight | 3/4" | Steel | 0000000 | 000000 |
2 15/16" | 2" | 1 | Straight | 1" | Steel | 0000000 | 000000 |

Overall | ||||||||
---|---|---|---|---|---|---|---|---|
Ht. | Wd. | Dp. | For Number of Tools | Number of Mounting Holes | Mounting Hole Dia. | Material | Each | |
1 1/2" | 8 3/4" | 12 1/4" | 10 | 4 | 3/16" | Steel | 0000000 | 0000000 |