Made of aluminum-bronze, these extensions satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

The square drive has a rounded shape that allows the extension to pivot inside the socket opening and turn it from an angle.

Lock your socket into the extension to prevent accidental disengagement.

Fit these adapters between your wrench and socket to enable finger tightening.

Push the square drive through the adapter to change size.

Attach one of these adapters to a socket to turn it with an open-end or box wrench.

Turn sockets with a bit screwdriver.

Adapters are set to a specific torque and cannot be adjusted.

Set a desired torque within the range.

Lock your socket into the extension to prevent accidental disengagement.

A magnet holds the socket, making changes quicker.

Prevent overtightening that can damage fasteners. These adapters spring back slightly when the set torque is reached.

Insulated to protect against accidental contact with live electrical circuits, these sockets are tested to 1,000 volts to meet ASTM F1505 and IEC 60900.

The short bit on these sockets fits in spaces where height clearance is limited.

Extra-long bits allow access to hard-to-reach fasteners.

These sockets are also known as pin-in-Torx bits.

Extra-long bits allow access to hard-to-reach fasteners.

Make maximum contact with all sides of a fastener to reduce slipping. These sockets are also known as torque adapters.

The opening shape makes more contact with fasteners for a better grip than standard open-end sockets. Also known as flare-nut or line wrench sockets, they're often used with flared tube fittings and fuel and hydraulic lines.

Pivot the head to access fasteners from an angle.

With a plastic insert, these sockets firmly grip hex nuts and bolts without rounding them or scratching highly polished finishes.

Pivot the head to access fasteners from an angle.

These short sockets fit spaces where height clearance is limited.

These sockets fit the nuts found on water and gas valves.

Turn many sizes of square, hex, and 8-point fasteners with one socket. Place over the fastener and 54 pins move to grip it securely.

A rubber insert grips the plug to prevent damage.

Made of aluminum-bronze, these sockets satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

Achieve the best possible grip on hex fasteners and prevent rounding.

Designed to remove and install dual wheels on trucks and trailers, these sockets have a hex recess for accessing lug nuts and a square recess to turn the threaded shafts found on inner wheels.

Pivot the head to access fasteners from an angle.

Pivot the head to access fasteners from an angle.

Extra length allows access to fasteners on long bolts.

Tighten or loosen nuts and bolts without damaging the finish.

The hex shape grips hex fasteners and prevents rounding.

Extra-long bits allow access to hard-to-reach fasteners.

Extra-long bits allow access to hard-to-reach fasteners.

These sockets are also known as pin-in-hex or pin-in-socket bits.

Shaped and sized for compatibility with wheel bearing locknuts on trucks and trailers, the sockets in these sets make it easy to install and remove locknuts.

For high quality at a lower price, choose these U.S.A.-made sets.

Suitable for occasional maintenance work, these sets are imported.

With squared lobes that won’t slip at high torque, all of the sockets in these sets are designed to fit on external Torx-Plus fasteners, often found on pickup trucks.

For high quality at a lower price, choose these U.S.A.-made sets.

Made of aluminum-bronze, these sockets satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

Lock your socket into the extension to prevent accidental disengagement..

Make maximum contact on all sides of a fastener to reduce slipping. These sockets are also known as torque adapters.

Often used with an extension, these sockets turn fasteners and fittings in obstructed areas that a regular socket can't reach. They are also known as crowfoot wrenches.

These sockets are made to withstand the high torque and force of impact tools.

Attach to your socket for a longer reach.

The hex shape grips hex fasteners and prevents rounding. These sockets are made to withstand the high torque and force of impact tools.

Lock your socket into the extension to prevent accidental disengagement.

Hold different square drive sizes on the four clip rails stored in these trays.

The slots in these low-profile organizers are a different color than the base so it's clear when tools are missing from your bench top or drawer.

The rail is smooth plastic so the clips move more easily than on steel-rail organizers.

Attach these adapters to square-drive tools.