Made of heat-resistant Nomex, these harnesses withstand temperatures up to 700° F. They have a D-ring on the back that attaches to a lanyard. A complete fall-arrest system requires a lanyard, a harness, and an anchor. When used properly, the system meets applicable OSHA requirements.

These harnesses have leather-insulated metal components and meet ASTM F887 when used with an arc flash-resistant lanyard. They have a D-ring on the back that attaches to a lanyard. A complete fall-arrest system requires a lanyard, a harness, and an anchor. When used properly, the system meets applicable OSHA requirements.

D-rings on each hip provide a stable working position. Harnesses have a D-ring on the back that attaches to a lanyard for fall protection. A complete fall-arrest system requires a lanyard, a harness, and an anchor. When used properly, the system meets applicable OSHA requirements.

Polyester/elastomer harnesses expand and contract with your movements.

These versatile harnesses have one D-ring on the chest for use with ladder-climbing systems as well as one D-ring on each hip to provide a stable working position. Attach harness to a ladder-climbing system using a carabiner. Harnesses have a D-ring on the back that attaches to a lanyard for fall protection. A complete fall-arrest system requires a lanyard, a harness, and an anchor. When used properly, the system meets applicable OSHA requirements.

With D-rings on the shoulders, these harnesses allow you to raise and lower workers. They have a D-ring on the back that attaches to a lanyard. A complete fall-arrest system requires a lanyard, a harness, and an anchor. When used properly, the system meets applicable OSHA requirements.

A quick-stop lanyard must be used when you have less than 18 1/2 ft. of fall clearance as it will stop your fall within a few inches. Use in conjunction with a harness and an anchor for a complete fall-arrest system. When used properly, the system meets applicable OSHA requirements.

Dual-leg lanyard attaches to two anchors at once.

Use the shock-absorbing attachment (sold separately) to increase the capacity of 310-lb. polyester lanyards to 400 lbs.

These lanyards form their own anchor point by attaching directly to a rated structure. A quick-stop lanyard must be used when you have less than 18 1/2 ft. of fall clearance. Use in conjunction with a harness for a complete fall-arrest system. When used properly, the system meets applicable OSHA requirements.

Hook-over lanyard has a large snap hook that attaches directly to a rated structure such as a scaffold or pipe to create an anchor point.

Wraparound lanyard loops around a rated structure such as an I-beam and then attaches to itself to create an anchor point.

For adequate fall clearance, you must have at least 18 1/2 ft. of clearance. Use in conjunction with a harness and an anchor for a complete fall-arrest system. When used properly, the system meets applicable OSHA requirements.

Polyester/elastomer lanyards expand and contract with your movements.

Dual-leg lanyards attach to two anchors at once.

Made of Kevlar, these lanyards meet ASTM F887 when used with an arc flash-resistant harness. For adequate fall clearance, you must have at least 18 1/2 ft. of clearance. Use in conjunction with a harness and an anchor for a complete fall-arrest system. When used properly, the system meets applicable OSHA requirements.

Dual-leg lanyard attaches to two anchors at once.

Made of steel, these durable lanyards hold up in abrasive and high-heat applications. For adequate fall clearance, you must have at least 20 ft. of clearance. Use in conjunction with a harness and an anchor for a complete fall-arrest system. When used properly, the system meets applicable OSHA requirements.

For adequate fall clearance, you must have at least 18 1/2 ft. of clearance. Use in conjunction with a harness for a complete fall-arrest system. When used properly, the system meets applicable OSHA requirements.

Polyester/elastomer lanyards expand and contract with your movements.

Hook-over lanyards have a large snap hook that attaches directly to a rated structure such as a scaffold or pipe to create an anchor point.

Wraparound lanyards loop around a rated structure such as an I-beam and then attach to themselves to create an anchor point.

Made of Kevlar, these lanyards meet ASTM F887 when used with an arc flash-resistant harness. Wrap the lanyard around a rated structure such as an I-beam and then attach it to itself to create an anchor point. For adequate fall clearance, you must have at least 18 1/2 ft. of clearance. Use in conjunction with a harness for a complete fall-arrest system.