4130 alloy steel has a low carbon content that provides good weldability. It's often used for structural applications.

More corrosion resistant and easier to form than multipurpose 6061 aluminum, 6063 is primarily used for exterior railings, decorative trim, and door frames.

Polished to either a brushed or mirror-like finish, this material is often used to fabricate decorative enclosures and industrial workstations.

The most formable brass we offer, 260 offers better weldability than 300 series brass but it’s not as machinable. Sometimes called cartridge brass, it's commonly used for ammunition casings, radiator components, and decorative door hardware.

This extruded acrylic offers similar performance as cast acrylic at a lower cost.

These rectangular tubes are flame retardant, machinable, and electrically insulating.

Commonly used in transformers and switch gear cans on electrical poles, these rectangular tubes are more electrically insulating than Garolite XX.

Route and insulate wire using these square fiberglass tubes, which fit better along edges and around corners than round tubes.

Applications for these tubes include jackets, seals, and insulation.

Screw and nut sets or nuts secure brackets and other accessories to rails.

Mount components to these load-rated bearings and track rollers to add linear motion along T-slotted rails.

Add panels to T-slotted framing to create machine guards, strip doors, and welding curtains.

Attach sensors, tubes, and other components to T-slotted framing rails and structures.

Mount these bull's eye levels to workstation and table frames made of T-slotted framing for easy leveling in all directions on the horizontal plane.

Bumpers cushion doors and other moving parts to prevent damage and reduce noise.

Secure doors and windows made of T-slotted framing to protect valuables or restrict access for safety.

Add mounting feet and casters to T-slotted framing structures to level equipment, anchor legs to the floor, or add mobility.

Route wires, cables, and tubing along T-slotted rails.

Add electrical outlets to workstations with these outlet strips that mount on T-slotted rails.

Illuminate workstations, enclosures, and machines.

Add rollers to T-slotted framing to create flow rails, ball transfer tables, and other manual conveyors.

With welded ends, these short lengths of strut channel provide a finished look when mounting clamps and accessories to machines and surfaces.

Slide the strut channel into the tube for telescoping length adjustments.

This welded, one-piece strut channel combines two strut channels side-to-side.

For compatibility with quick-connect clamps to secure pipe and conduit without screws and tools, this strut channel has narrow slotted holes.

A spring plus serrated grooves that grip the lip of the channel provide a more secure hold than standard strut channel nuts.

In addition to serrated grooves for gripping the lip of the channel, these nuts have wings for easy positioning.

When there's no access to the open side of a strut channel, slip one of these nuts through a slotted hole and turn it 90° to secure it in the channel.

Push these nuts into place rather than threading them onto a fastener.

Also known as insert nuts, these convert slotted holes to threaded round holes and keep them centered in the channel.

A tab fits tightly against the lip of the channel to keep these nuts from slipping.

Notches on these washers grip the channel to keep them in place.

Keep hardware centered in the strut channel slot.

Brackets mount on the outside of strut channel to allow trolley movement.

Designed to wrap around the sides of strut channel, these brackets provide a stronger hold than other strut channel brackets.

Push these brackets into strut channel and tighten the included cam screws for a partially concealed connection.

Create a four-sided raceway for cable, or give a more finished look to strut channel structures.

Support the corners of strut channel structures.

A tab on the end of these shelf brackets fits inside the strut channel for extra stability.

Slip these hangers onto the lip of top-opening strut channel to attach chain, wire rope, pipe, and threaded rod.

For quick mounting of components, these hangers snap into strut channels for a strong hold and easy repositioning.

Rails are drilled with consistently spaced holes for multiple mounting options that do not require machining. Use this steel bolt-together framing to build guards, tables, and racks.

Create posts of varying lengths.

Adjust supports to the exact height you need to route pipe, conduit, and tubing through strut-mount routing clamps and hangers.