Extension Force Extension Force |
|---|
|
Body Material Body Material |
|---|
|
Compression Force Compression Force |
|---|
|
Force Mechanism Force Mechanism |
|---|
|
Rod Material Rod Material |
|---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
|---|
Ball Socket Material Ball Socket Material |
|---|
|
About Gas Springs
Gas springs are typically used to assist in opening lids, covers, windows, conveyors, and seats—similar to a hatchback opening on a car.
More
Reducible-Force Gas Springs
Ensure you have the correct force for your application. These gas springs have a bleed valve so you can release gas to permanently reduce the force to meet your requirements. They come charged to their maximum force. Use the included tool to open the valve and bleed off the gas—there's no disassembly required. Release gas in very small increments and then test your application. Once gas is released, the force is permanently reduced. Gas springs have a ball socket end fitting and ball stud on each end for mounting. Ball socket end fittings rotate in any direction on the ball stud to compensate for misalignment.
For technical drawings and 3-D models, click on a part number.
Rod | Ball Stud | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Extended Lg. | Compressed Lg. | Stroke Lg. | Extension Force, lbs. | Compression Force, lbs. | Body Dia. | Dia. | Thread Size | Removable End Fittings | Lg. | Thread Lg. | Thread Size | Dia., mm | Material | Temperature Range, ° F | Each | |
Steel Body and Rod | ||||||||||||||||
| 7.72" | 5.36" | 2.36" | 90 | 117 | 0.59" | 0.24" | M6 | Yes | 1.16" | 0.49" | 5/16"-18 | 10 | Zinc-Plated Steel | -40° to 212° | 000000 | 000000 |
| 10.87" | 6.93" | 3.94" | 90 | 120 | 0.59" | 0.24" | M6 | Yes | 1.16" | 0.49" | 5/16"-18 | 10 | Zinc-Plated Steel | -40° to 212° | 000000 | 00000 |
| 11.81" | 7.87" | 3.94" | 146 | 192 | 0.71" | 0.31" | M6 | Yes | 1.16" | 0.49" | 5/16"-18 | 10 | Zinc-Plated Steel | -40° to 212° | 000000 | 00000 |
| 12.8" | 8.86" | 3.94" | 269 | 348 | 0.91" | 0.39" | M8 | Yes | 1.42" | 0.65" | 5/16"-18 | 13 | Zinc-Plated Steel | -40° to 212° | 0000000 | 00000 |
| 13.78" | 9.84" | 3.94" | 562 | 770 | 1.1" | 0.55" | M10 | Yes | 1.74" | 0.79" | M10 | 16 | Zinc-Plated Steel | -40° to 212° | 0000000 | 000000 |
| 14.8" | 8.9" | 5.9" | 90 | 118 | 0.59" | 0.24" | M6 | Yes | 1.16" | 0.49" | 5/16"-18 | 10 | Zinc-Plated Steel | -40° to 212° | 0000000 | 00000 |
| 15.75" | 9.84" | 5.91" | 146 | 197 | 0.71" | 0.31" | M6 | Yes | 1.16" | 0.49" | 5/16"-18 | 10 | Zinc-Plated Steel | -40° to 212° | 000000 | 00000 |
| 16.73" | 10.83" | 5.9" | 269 | 359 | 0.91" | 0.39" | M8 | Yes | 1.42" | 0.65" | 5/16"-18 | 13 | Zinc-Plated Steel | -40° to 212° | 0000000 | 00000 |
| 18.74" | 10.87" | 7.87" | 90 | 117 | 0.59" | 0.24" | M6 | Yes | 1.16" | 0.49" | 5/16"-18 | 10 | Zinc-Plated Steel | -40° to 212° | 0000000 | 00000 |
| 19.68" | 11.81" | 7.87" | 146 | 196 | 0.71" | 0.31" | M6 | Yes | 1.16" | 0.49" | 5/16"-18 | 10 | Zinc-Plated Steel | -40° to 212° | 000000 | 00000 |
| 19.88" | 12.01" | 7.87" | 269 | 391 | 0.91" | 0.39" | M8 | Yes | 1.42" | 0.65" | 5/16"-18 | 13 | Zinc-Plated Steel | -40° to 212° | 0000000 | 00000 |
| 21.65" | 13.78" | 7.87" | 562 | 839 | 1.1" | 0.55" | M10 | Yes | 1.74" | 0.79" | M10 | 16 | Zinc-Plated Steel | -40° to 212° | 0000000 | 000000 |
| 23.62" | 13.78" | 9.84" | 146 | 196 | 0.71" | 0.31" | M6 | Yes | 1.16" | 0.49" | 5/16"-18 | 10 | Zinc-Plated Steel | -40° to 212° | 0000000 | 00000 |
| 23.82" | 13.98" | 9.84" | 269 | 383 | 0.91" | 0.39" | M8 | Yes | 1.42" | 0.65" | 5/16"-18 | 13 | Zinc-Plated Steel | -40° to 212° | 000000 | 00000 |
| 27.56" | 15.75" | 11.81" | 146 | 196 | 0.71" | 0.31" | M6 | Yes | 1.16" | 0.49" | 5/16"-18 | 10 | Zinc-Plated Steel | -40° to 212° | 0000000 | 00000 |
| 27.76" | 15.94" | 11.82" | 269 | 378 | 0.91" | 0.39" | M8 | Yes | 1.42" | 0.65" | 5/16"-18 | 13 | Zinc-Plated Steel | -40° to 212° | 000000 | 00000 |
| 29.53" | 17.72" | 11.81" | 562 | 892 | 1.1" | 0.55" | M10 | Yes | 1.74" | 0.79" | M10 | 16 | Zinc-Plated Steel | -40° to 212° | 0000000 | 000000 |
| 36.42" | 20.67" | 15.75" | 269 | 365 | 0.91" | 0.39" | M8 | Yes | 1.42" | 0.65" | 5/16"-18 | 13 | Zinc-Plated Steel | -40° to 212° | 0000000 | 00000 |
| 37.4" | 21.65" | 15.75" | 562 | 880 | 1.1" | 0.55" | M10 | Yes | 1.74" | 0.79" | M10 | 16 | Zinc-Plated Steel | -40° to 212° | 000000 | 000000 |
| 45.28" | 25.59" | 19.69" | 562 | 873 | 1.1" | 0.55" | M10 | Yes | 1.74" | 0.79" | M10 | 16 | Zinc-Plated Steel | -40° to 212° | 0000000 | 000000 |
Corrosion-Resistant Reducible-Force
Gas Springs with Eyelet Fittings
 |  Gas Spring Shown with Rod Protector |
 |
Made from stainless steel for excellent corrosion resistance in damp environments. These gas springs have a bleed valve so you can release gas to permanently reduce the force to meet your requirements. They come charged to their maximum force. Use the included tool to open the valve and bleed off the gas—there's no disassembly required. Release gas in very small increments and then test your application. Once gas is released, the force is permanently reduced. Gas springs have an eyelet end fitting on each end; requires an eyelet mounting bracket (sold separately) for mounting.
Rod protectors (sold separately) prevent impact damage.
Regulator kits (sold separately) indicate how much gas you’re releasing. Kits contain fittings to connect to your gas spring, a pressure gauge, a manifold, and instructions.
For technical drawings and 3-D models, click on a part number.
Gas Springs | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Rod | Eyelet | Rod Protectors | ||||||||||||||||
| Extended Lg. | Compressed Lg. | Stroke Lg. | Extension Force, lbs. | Compression Force, lbs. | Body Dia. | Dia. | Thread Size | Removable End Fittings | Lg. | ID | Thick. | Thread Size | Thread Lg. | Temperature Range, ° F | Each | Each | ||
316 Stainless Steel Body and Chrome-Plated 316 Stainless Steel Rod | ||||||||||||||||||
| 8.25" | 6.25" | 2" | 249 | 283 | 0.88" | 0.38" | M8 | Yes | 1.12" | 0.39" | 0.38" | M8 | 0.45" | -40° to 300° | 0000000 | 000000 | 0000000 | 000000 |
| 10.5" | 8.5" | 2" | 517 | 622 | 1.17" | 0.56" | M10 | Yes | 1.62" | 0.39" | 1/2" | M10 | 0.55" | -40° to 300° | 0000000 | 000000 | 0000000 | 00000 |
| 12.25" | 8.25" | 4" | 248 | 384 | 0.88" | 0.38" | M8 | Yes | 1.12" | 0.39" | 0.38" | M8 | 0.45" | -40° to 300° | 0000000 | 000000 | 0000000 | 00000 |
| 14.5" | 10.5" | 4" | 517 | 873 | 1.17" | 0.56" | M10 | Yes | 1.62" | 0.39" | 1/2" | M10 | 0.55" | -40° to 300° | 0000000 | 000000 | 0000000 | 00000 |
| 16.25" | 10.25" | 6" | 249 | 354 | 0.88" | 0.38" | M8 | Yes | 1.12" | 0.39" | 0.38" | M8 | 0.45" | -40° to 300° | 0000000 | 000000 | 0000000 | 00000 |
| 18.5" | 12.5" | 6" | 522 | 890 | 1.17" | 0.56" | M10 | Yes | 1.62" | 0.39" | 1/2" | M10 | 0.55" | -40° to 300° | 0000000 | 000000 | 0000000 | 00000 |
| 20.25" | 12.25" | 8" | 249 | 353 | 0.88" | 0.38" | M8 | Yes | 1.12" | 0.39" | 0.38" | M8 | 0.45" | -40° to 300° | 0000000 | 000000 | 0000000 | 00000 |
| 22.5" | 14.5" | 8" | 518 | 857 | 1.17" | 0.56" | M10 | Yes | 1.62" | 0.39" | 1/2" | M10 | 0.55" | -40° to 300° | 0000000 | 000000 | 0000000 | 00000 |
| 24.25" | 14.25" | 10" | 245 | 348 | 0.88" | 0.38" | M8 | Yes | 1.12" | 0.39" | 0.38" | M8 | 0.45" | -40° to 300° | 0000000 | 000000 | 0000000 | 00000 |
| 26.5" | 16.5" | 10" | 520 | 838 | 1.17" | 0.56" | M10 | Yes | 1.62" | 0.39" | 1/2" | M10 | 0.55" | -40° to 300° | 0000000 | 000000 | 0000000 | 00000 |
| 28.25" | 16.25" | 12" | 247 | 365 | 0.88" | 0.38" | M8 | Yes | 1.12" | 0.39" | 0.38" | M8 | 0.45" | -40° to 300° | 0000000 | 000000 | 0000000 | 00000 |
| 30.5" | 18.5" | 12" | 520 | 876 | 1.17" | 0.56" | M10 | Yes | 1.62" | 0.39" | 1/2" | M10 | 0.55" | -40° to 300° | 0000000 | 000000 | 0000000 | 00000 |
| 32.25" | 18.25" | 14" | 248 | 368 | 0.88" | 0.38" | M8 | Yes | 1.12" | 0.39" | 0.38" | M8 | 0.45" | -40° to 300° | 0000000 | 000000 | 0000000 | 00000 |
| 36.25" | 20.25" | 16" | 245 | 366 | 0.88" | 0.38" | M8 | Yes | 1.12" | 0.39" | 0.38" | M8 | 0.45" | -40° to 300° | 0000000 | 000000 | 0000000 | 00000 |
| 38.5" | 22.5" | 16" | 514 | 866 | 1.17" | 0.56" | M10 | Yes | 1.62" | 0.39" | 1/2" | M10 | 0.55" | -40° to 300° | 0000000 | 000000 | 0000000 | 00000 |
| 46.5" | 26.5" | 20" | 516 | 847 | 1.17" | 0.56" | M10 | Yes | 1.62" | 0.39" | 1/2" | M10 | 0.55" | -40° to 300° | 0000000 | 000000 | 0000000 | 00000 |
| 54.5" | 30.5" | 24" | 516 | 868 | 1.17" | 0.56" | M10 | Yes | 1.62" | 0.39" | 1/2" | M10 | 0.55" | -40° to 300° | 0000000 | 000000 | 0000000 | 00000 |
Reducible-Force Locking Gas Springs
Ensure you have the correct force for your application. These gas springs have a bleed valve so you can release gas to permanently reduce the force to meet your requirements. They're used to protect material and equipment underneath heavy loads—gas springs lock automatically when fully extended, ensuring they can't be closed until it's safe to do so. Press on the overlapping sleeve to unlock, allowing the gas spring to compress in a controlled manner.
Gas springs come charged to their maximum force. Use the included tool to open the valve and bleed off the gas—there's no disassembly required. Release gas in very small increments and then test your application. Once gas is released, the force is permanently reduced. Gas springs have a ball socket end fitting and ball stud on each end for mounting. Ball socket end fittings rotate in any direction on the ball stud to compensate for misalignment.
Note: When using two gas springs together in a locking application, use one locking spring and one nonlocking spring.
For technical drawings and 3-D models, click on a part number.
Body | Rod | Ball Stud | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Extended Lg. | Compressed Lg. | Stroke Lg. | Extension Force, lbs. | Compression Force, lbs. | Dia. | Sleeve Dia. | Dia. | Thread Size | Removable End Fittings | End Thread Size | Lg. | Thread Lg. | Thread Size | Temperature Range, ° F | Each | |
Steel Body and Rod | ||||||||||||||||
| 11.81" | 7.87" | 3.94" | 146 | 207 | 0.71" | 0.87" | 0.31" | M6 | Yes | M6 | 1.16" | 0.49" | 5/16"-18 | -40° to 212° | 00000000 | 000000 |
| 12.8" | 8.86" | 3.94" | 269 | 461 | 0.91" | 1.13" | 0.39" | M8 | Yes | M8 | 1.42" | 0.65" | 5/16"-18 | -40° to 212° | 00000000 | 00000 |
| 15.75" | 9.84" | 5.91" | 146 | 209 | 0.71" | 0.87" | 0.31" | M6 | Yes | M6 | 1.16" | 0.49" | 5/16"-18 | -40° to 212° | 00000000 | 00000 |
| 16.73" | 10.83" | 5.9" | 269 | 408 | 0.91" | 1.13" | 0.39" | M8 | Yes | M8 | 1.42" | 0.65" | 5/16"-18 | -40° to 212° | 00000000 | 00000 |
| 19.68" | 11.81" | 7.87" | 146 | 205 | 0.71" | 0.87" | 0.31" | M6 | Yes | M6 | 1.16" | 0.49" | 5/16"-18 | -40° to 212° | 00000000 | 00000 |
| 19.88" | 12.01" | 7.87" | 269 | 396 | 0.91" | 1.13" | 0.39" | M8 | Yes | M8 | 1.42" | 0.65" | 5/16"-18 | -40° to 212° | 00000000 | 00000 |
| 21.65" | 13.78" | 7.87" | 561 | 1,091 | 1.1" | 1.37" | 0.55" | M10 | Yes | M10 | 1.74" | 0.79" | M10 | -40° to 212° | 00000000 | 000000 |
| 23.62" | 13.78" | 9.84" | 146 | 202 | 0.71" | 0.87" | 0.31" | M6 | Yes | M6 | 1.16" | 0.49" | 5/16"-18 | -40° to 212° | 00000000 | 00000 |
| 24.6" | 14.76" | 9.84" | 269 | 383 | 0.91" | 1.13" | 0.39" | M8 | Yes | M8 | 1.42" | 0.65" | 5/16"-18 | -40° to 212° | 00000000 | 00000 |
| 27.56" | 15.75" | 11.81" | 146 | 201 | 0.71" | 0.87" | 0.31" | M6 | Yes | M6 | 1.16" | 0.49" | 5/16"-18 | -40° to 212° | 00000000 | 00000 |
| 28.54" | 16.73" | 11.81" | 269 | 378 | 0.91" | 1.13" | 0.39" | M8 | Yes | M8 | 1.42" | 0.65" | 5/16"-18 | -40° to 212° | 00000000 | 00000 |
| 29.53" | 17.72" | 11.81" | 561 | 976 | 1.1" | 1.37" | 0.55" | M10 | Yes | M10 | 1.74" | 0.79" | M10 | -40° to 212° | 00000000 | 000000 |
| 36.42" | 20.67" | 15.75" | 269 | 373 | 0.91" | 1.13" | 0.39" | M8 | Yes | M8 | 1.42" | 0.65" | 5/16"-18 | -40° to 212° | 00000000 | 000000 |
| 37.4" | 21.65" | 15.75" | 561 | 935 | 1.1" | 1.37" | 0.55" | M10 | Yes | M10 | 1.74" | 0.79" | M10 | -40° to 212° | 00000000 | 000000 |
| 45.39" | 25.7" | 19.69" | 561 | 914 | 1.1" | 1.38" | 0.55" | M10 | Yes | M10 | 1.74" | 0.79" | M10 | -40° to 212° | 00000000 | 000000 |
Corrosion-Resistant Reducible-Force Locking Gas Springs
Ensure you have the correct force for your application. These gas springs have a bleed valve so you can release gas to permanently reduce the force to meet your requirements. They're used to protect material and equipment underneath heavy loads—gas springs lock automatically when fully extended, ensuring they can't be closed until it's safe to do so. Press on the overlapping sleeve to unlock, allowing the gas spring to compress in a controlled manner.
Gas springs come charged to their maximum force. Use the included tool to open the valve and bleed off the gas—there's no disassembly required. Release gas in very small increments and then test your application. Once gas is released, the force is permanently reduced. Gas springs have a ball socket end fitting and ball stud on each end for mounting. Ball socket end fittings rotate in any direction on the ball stud to compensate for misalignment.
Note: When using two gas springs together in a locking application, use one locking spring and one nonlocking spring.
For technical drawings and 3-D models, click on a part number.
Body | Rod | Ball Stud | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Extended Lg. | Compressed Lg. | Stroke Lg. | Extension Force, lbs. | Compression Force, lbs. | Max. Cycles per Minute | Dia. | Sleeve Dia. | Dia. | Thread Size | Removable End Fittings | End Thread Size | Lg. | Thread Lg. | Thread Size | Temperature Range, ° F | Each | |
316 Stainless Steel | |||||||||||||||||
| 7.5" | 5.5" | 2" | 90 | 114 | 6 | 0.59" | 0.87" | 0.24" | M6 | Yes | M6 | 1.2" | 0.54" | 5/16"-18 | -22° to 176° | 0000000 | 000000 |
| 10" | 7" | 3" | 90 | 114 | 6 | 0.59" | 0.87" | 0.24" | M6 | Yes | M6 | 1.2" | 0.54" | 5/16"-18 | -22° to 176° | 0000000 | 00000 |
| 11.9" | 8.4" | 3.5" | 120 | 160 | 6 | 0.71" | 0.98" | 0.31" | M6 | Yes | M6 | 1.2" | 0.54" | 5/16"-18 | -22° to 176° | 0000000 | 000000 |
| 12" | 8.5" | 3.5" | 90 | 114 | 6 | 0.59" | 0.87" | 0.24" | M6 | Yes | M6 | 1.2" | 0.54" | 5/16"-18 | -22° to 176° | 0000000 | 000000 |
| 15" | 9.5" | 5.5" | 90 | 114 | 6 | 0.59" | 0.87" | 0.24" | M6 | Yes | M6 | 1.2" | 0.54" | 5/16"-18 | -22° to 176° | 0000000 | 000000 |
| 15.25" | 9.75" | 5.5" | 120 | 160 | 6 | 0.71" | 0.98" | 0.31" | M6 | Yes | M6 | 1.2" | 0.54" | 5/16"-18 | -22° to 176° | 0000000 | 000000 |
| 17" | 10.25" | 6.75" | 90 | 114 | 6 | 0.59" | 0.87" | 0.24" | M6 | Yes | M6 | 1.2" | 0.54" | 5/16"-18 | -22° to 176° | 0000000 | 000000 |
| 17" | 11" | 6" | 120 | 160 | 6 | 0.71" | 0.98" | 0.31" | M6 | Yes | M6 | 1.2" | 0.54" | 5/16"-18 | -22° to 176° | 0000000 | 000000 |
| 18.5" | 11.25" | 7.25" | 90 | 114 | 6 | 0.59" | 0.87" | 0.24" | M6 | Yes | M6 | 1.2" | 0.54" | 5/16"-18 | -22° to 176° | 0000000 | 000000 |
| 18.5" | 11.25" | 7.25" | 120 | 160 | 6 | 0.71" | 0.98" | 0.31" | M6 | Yes | M6 | 1.2" | 0.54" | 5/16"-18 | -22° to 176° | 0000000 | 000000 |
| 20" | 12" | 8" | 90 | 114 | 6 | 0.59" | 0.87" | 0.24" | M6 | Yes | M6 | 1.2" | 0.54" | 5/16"-18 | -22° to 176° | 0000000 | 000000 |
| 20" | 12" | 8" | 120 | 160 | 6 | 0.71" | 0.98" | 0.31" | M6 | Yes | M6 | 1.2" | 0.54" | 5/16"-18 | -22° to 176° | 0000000 | 000000 |
| 28" | 16.5" | 11.5" | 250 | 323 | 6 | 0.87" | 1.1" | 0.39" | M8 | Yes | M8 | 1.44" | 0.69" | 5/16"-18 | -22° to 176° | 0000000 | 000000 |
Corrosion-Resistant Eyelet
Mounting Brackets for Gas Springs
Made from stainless steel for excellent corrosion resistance in damp environments. Attach an eyelet end fitting (sold separately) to one of these brackets to mount your gas spring. Mount on any panel, lid, or door.
For technical drawings and 3-D models, click on a part number.
Overall | Mounting Holes | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Eyelet ID | Thick. | Shoulder Lg. | Stud Lg. | Lg. | Wd. | Material | Mounting Fasteners Included | No. of | Dia. | Each | ||
| 2 | 0.39" | 0.25" | 0.69" | 3/4" | 3" | 3.5" | 18-8 Stainless Steel | No | 4 | 0.33" | 0000000 | 000000 |
Corrosion-Resistant Heavy Duty Eyelet
Mounting Brackets for Gas Springs
Made from stainless steel for excellent corrosion resistance in damp environments. These brackets secure eyelet end fittings (sold separately) from both sides to provide a strong hold on gas springs that get bumped or jostled. Mount on any panel, lid, or door.
For technical drawings and 3-D models, click on a part number.
Overall | Mounting Holes | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| For Eyelet ID | Thick. | Stud Lg. | Lg. | Wd. | Material | Mounting Fasteners Included | No. of | Dia. | Each | ||
| 2 | 0.39" | 0.115" | 0.59" | 0.8" | 3.5" | 304 Stainless Steel | No | 2 | 0.38" | 0000000 | 000000 |