Create a custom spool to store twine, wire, rope, and chain.

Let go of your tool and the cable pulls it back up.

Housings have predrilled holes for mounting.

Secure to a square arbor.

A spring controls the tension.

Support the weight of your tool with air hose instead of a separate cable.

Use these reels in applications where the hose is pulled straight out of the reel.

These reels have more support than medium duty reels, so you can pull the hose out at an angle.

Strong and well-supported to handle large-diameter hose, these reels can be used in high-vibration applications.

Not only do these reels have very good corrosion resistance, they also have more support than medium duty reels, so you can pull the hose out at an angle.

Turn the hand crank to rewind your hose.

Designed for areas where space is limited, these reels have the smallest overall size of all our reels.

Protect your hose when it’s not in use.

Protect your hose when it's not in use.

Reels are enclosed to protect your hose when it's not in use.

A ratchet holds the extension cord on these reels in place at any length; a quick pull releases the cord and the spring-driven winding mechanism retracts it.

Connect the wires in your power cord to these reels for a permanent and protected connection—the screw terminals are in a gasketed dust- and water-resistant NEMA 4 enclosure.

Controlled winding prevents the cord from whipping at the end, making winding safer and extending the life of the cord and reel.

Use these cord reels where ignitable gas and dust may be present. They're rated NEMA 9 and UL listed for Class I, Division 1, Groups C and D; Class II, Division 1, Groups E, F, and G; and Class III, Division 1 hazardous environments.

Plug a cord into these reels.

Store and transport cords.

Combine a counter, feeder reel, coiler reel, and stand to create a wire, cable, and cord length measurer.

Fill these reels with powdered chalk and you’ll be ready to snap a line.

Easily hold this half-moon-shaped chalk to coat snap lines for line marking.

No matter how far you extend them, these springs pull back with the same amount of force.

Unlike constant-force springs, the farther you pull these, the harder they are to pull. Use them for applications where the load becomes lighter as the spring contracts, such as in automated dispensing machines.

Extend keys from the holder when needed and a cable automatically retracts them when you're done.

Mount these balancers in the corner of a horizontal frame to suspend, lift, or lower objects that move vertically in a track such as windows, doors, and panels.

Multiple joints allow up/down and in/out movement in addition to 360° rotation. These arms are often used to hold exhaust hose in place.