A polyester braid is embedded into the walls of this tubing, giving it the strength to withstand higher pressures than other soft tubing for air and water. Use in applications up to 350 psi.

A braid reinforcement gives this tubing excellent strength in high-pressure applications up to 250 psi.

An internal reinforcement gives this tubing the strength to handle high-pressure applications up to 350 psi.

Designed for high-purity processes, this tubing is made without plasticizers like DEHP that can contaminate the fluid passing through it.

Made of SBR rubber, this hose and its cover are tough enough to resist wear and tear.

Wash down equipment in food-processing plants, dairies, and other facilities with hot water.

With fittings already attached, it’s easy to connect this hose to a washdown station and wash gun.

Made of a PVC and Buna-N blend, this hose is lighter in weight than standard EPDM water hose.

Made of a PVC/Buna-N blend, this hose is lighter than standard EPDM water hose.

Certified to meet NSF/ANSI 61, this hose is safe for use in drinking water systems.

Made of high-purity PVC with 303 stainless steel fittings, this hose won’t contaminate water. It’s often used to transfer deionized water in applications such as semiconductor manufacturing.

Reach for this neoprene rubber hose to handle processes requiring high-pressure, high-temperature washdowns.

The steel wire reinforcement gives this hose extra strength in high-pressure conditions.

Blended rubber construction with extra-strong reinforcement gives this hose strength to transfer large volumes of water in high-vacuum or high-pressure operations.

Safely suction, transfer, and dispense drinking water.

Pull water out of wells, tanks, and other drinking water sources through lines connected by cam-and-groove fittings.

Drain water from one place to another. Hose lays flat and folds up for carrying and storage.

Yarn reinforcement gives this hose good strength under pressure.

Made of FEP (fluorinated ethylene propylene), this hose can stand up to chemicals at high temperatures.

Expose this UHMW (ultra-high molecular weight) polyethylene hose to harsh physical conditions without worrying about it deteriorating or becoming brittle.

You don’t need a lot of force to bend this low-pressure chemical hose. The extra flexibility makes it good for offset connections and tight spaces.

Silicone rubber gives this hose, often called radiator hose, the ability to handle high-heat conditions.

Move coolant around tight turns in crowded spaces. Made of silicone, these elbows withstand high temperatures up to 350° F.

Bend this hose in any direction and it won’t kink, even when routed through tight spaces.

Reinforced by aramid fabric, this silicone rubber hose handles higher temperatures than any other coolant hose we offer.

Transport milk, syrup, meat, and other wet food and beverages through your line.

For easy access to lines that handle oily and fatty foods and beverages, this hose has flanged ends that join with quick-clamp fittings.

Strengthened with yarn, this hose handles high-pressure vacuum and suction without getting kinked or crushed. Its fittings easily detach, giving you quick access to your line.

Warm viscous food and beverages, such as syrup and honey, to keep it flowing even when the temperature drops.

Easily access lines that move highly alcoholic or acidic wet food and beverages—this hose has flanged ends that join with quick-clamp fittings.

With a tough EPDM cover, this hose won’t wear down from rubbing or scraping, crack from ozone, or degrade from UV light. It has flanged ends that join with quick-clamp fittings, so you can easily access lines that carry milk, syrup, meat, and other wet food and drinks.

Attach push-on barbed fittings to this hose for use in low-pressure hydraulic applications. No clamps are needed to secure fittings to the hose; the more you pull on the fittings, the tighter the hose will grip.

Although only half the weight, this hose resists wear and tear 240 times better than our standard rubber hydraulic hose.

Although only half the weight, this hose resists wear and tear 240 times better than our standard rubber hydraulic hose. The fittings come attached, so this hose is ready to connect to a male threaded fitting on one end and a female one on the other.

Prevent electrical shock and damage to equipment while moving hydraulic fluid near high voltages.

For frequent connections, this hose has a socket end that's faster to connect and disconnect than a threaded fitting. Thanks to two layers of blended rubber, this hose bends twice as sharply and resists wear and tear 80 times better than our basic hydraulic hose.

To handle rapid changes in pressure and flow without bursting, this hose is reinforced with four steel wire spirals. It comes with male threaded fittings already attached, so it's ready to use right out of the box.

The new standard for rubber hydraulic hose, this hose bends twice as sharply and resists wear and tear 80 times better than our basic hydraulic hose. To save you time, it comes with male threaded fittings already attached.

When you need access to your line, don’t waste time threading and unthreading your fittings. This hose has a quick-disconnect fitting on both ends. It bends twice as sharply and resists wear and tear 80 times better than our basic hydraulic hose.

Transfer fluid between pumps, cylinders, and other parts of your hydraulic system.

Use this hose to transfer fluid between pumps, cylinders, and other parts of your hydraulic system.

Lighter than rubber and more flexible than PVC, this polyurethane hose stands up to the wear and tear of daily use.

The rubber cover meets MSHA (Mine Safety and Health Administration) standards for flame resistance, so this hose is often used to transfer highly compressed air in robotic welding systems.

Attach barbed fittings to this hose for use in low-pressure air applications.

Also known as hot air blower hose, this hose stays flexible and strong as it transfers compressed air at temperatures above 300° F.

An extra-strong yarn reinforcement gives this hose excellent durability to handle higher pressures than standard air hose.

Transfer compressed air that’s up to 500 psi—this hose has extra-strong yarn reinforcement for excellent durability.

Made of Buna-N, this hose won't break down from oil, so you can run lubricated air to power tools.

With a tighter bend radius than other petroleum hose, this hose can easily twist and turn around equipment.

Made of tough Buna-N rubber, this hose has the durability to stand up to gasoline, fuel oil, and other petroleum-based products.

Transfer fuel oil with a hose that stays flexible in subzero conditions.

This hose is made of tough gum rubber that stands up to sand, steel shot, and other abrasives.

To transfer air or oil- and water-based paints, attach this hose to a paint-spray system that has separate hoses for air and paint. Fittings swivel until tightened for easy installation. Fittings with spring guards prevent kinking.

Made of EPDM rubber reinforced with steel wire so it handles high temperatures, this hose is often used to clean hard-to-reach areas or supply heat and moisture to processing equipment.

Avoid contamination as you supply a selective catalytic reduction (SCR) system with diesel exhaust fluid (DEF). Made of peroxide-cured EPDM with stainless steel fittings, this hose won’t leach contaminants into DEF.