These latches reach around outside corners to draw two surfaces together—use them to secure cases, toolboxes, and other containers.

A safety catch prevents accidental opening.

A plastic-coated handle and hook prevents the release of particles from metal-to-metal contact, which makes these latches good for clean room applications.

Mount these latches on a corner to draw perpendicular surfaces together.

Designed with compression springs to withstand vibration better than standard draw latches, these offer a more secure hold.

The latch arm is coated with vinyl so it won't scratch surfaces.

No need for a strike plate, these latches hook into a lip or notch.

Adjust the latching distance for a tight fit over gasketing and to compensate for misalignment.

To prevent accidental opening, these latches have a safety catch.

To secure overlapping components, pull the slide over the stud until they snap together. These latches resist shock and vibration.

Draw lightweight surfaces together with these latches.

Lift and turn the handle 180° to open and close these latches.

Mount these latches on a corner to draw perpendicular surfaces together. They have a safety catch to prevent accidental opening.

Add a padlock to secure these latches, which reach around corners to pull two surfaces together.

For use on gasketed doors, these latches use downward compression to pull surfaces together. They have a safety catch to prevent accidental opening.

An integrated slide bolt extends into the strike plate to resist pull and vibration from side-to-side, front-to-back, and up-and-down forces.

Each latch comes with a variety of strike plates for different mounting options.

Secure cases, toolboxes, and other containers—these locks reach around outside corners to draw two surfaces together.

For use on gasketed doors, these latches use downward compression to pull surfaces together.

Their spring-loaded design withstands vibration, rattling, and shaking better than other push-to-close grab latches for a more secure hold.

Turn the screw on the latch to adjust the gripping force on the strike plate.

Close and open these grab latches with a push—there's no need for a handle.

Each latch has top and bottom spring-loaded balls that can grab the strike plate from different directions.

Close and open these roller latches with a push—there's no need for a handle.

These latches are spring-loaded to overcome resistance caused by gaskets and air pressure to close doors tightly.

Magnetic force holds doors closed.

Made to NSF/ANSI standards, these latches have a completely sealed magnet to eliminate crevices that can trap food particles.

Their spring-loaded design withstands vibration, rattling, and shaking better than other face-mount push-to-close latches for a more secure hold.

Keep doors on refrigerators and industrial enclosures closed.

Attach these padlockable latches vertically to the side edge of doors on refrigerators, ovens, and industrial enclosures with the strike plate mounted behind it on the frame.

Operate these padlockable latches from either side of the door—there is a handle on both sides.

To open, push in the knob and pull the tab.

An emergency release handle offers a means of escape if the door closes with someone inside an enclosure. Mount these locks horizontally to the face of doors on refrigerators and industrial enclosures with the strike plate mounted on the frame.

Bolts are spring-loaded to stay latched until you activate the pull.

No hands needed—step on the top cap to latch the bolt; retract it by pressing the side release button.

Also known as cane bolts, these latches have the added height that's needed to bridge large vertical gaps. Install them at the top or bottom of swinging doors and gates to hold them in an open or closed position.

A large handle makes gripping these latches easier than other lift-and-drop barrel slide-bolt latches.

Choose these locks if you need locks that each open with a different key.

These padlockable latches are often used on 2" and 3" track to keep garage and other sectional overhead doors closed.

These padlockable latches are reversible for right- and left-hand mounting.

Slide the bolt and drop the knob into the notch to hold, then secure with a padlock.

Designed to stand up to heavy use, these latches are often seen on refrigerators and truck doors.

Tighten the screw on the strike plate to secure the bar and prevent accidental unlatching.

These latches are reversible for right- and left-hand mounting.

To prevent accidental unlatching due to vibration, there's a bushing in the eye.

Turn the handle to keep doors, drawers, and hatches closed.

The ring handle is recessed to stay out of the way when not in use. Latches arrive ready for single-point latching. For more holding power, add a latch kit for two-point latching, or add two latch kits for three-point latching.

Use these latches alone for single-point latching, or add latch kits for more holding power.

Choose these L-handle locks if you need several that open with the same key.

Side, top, and bottom latching points secure large, heavy doors that are subject to strenuous use, such as those on trucks and large access doors.

Spring tension holds screens in position.

Choose these locks if you need locks that each open with a different key.

In addition to sliding gates, these locks are for use on cantilever and fixed-roller gates.

A hidden push-button release on the bottom of these latches retracts the latch bolt; this discourages unwanted entry but allows access to those who know it’s there.

Safeguard sliding doors in wire and chain link partitions.

This lock has a latch bolt to secure doors in the closed position.

Hold bathroom doors closed by swinging these latches into a notch in the strike plate.