Over 48,000 metals now include traceable material certificates.

Protect tools, dies, and other parts during shipping and storage with these durable peel-away coatings. They resist abrasion, moisture, and corrosion. To apply, heat coatings and dip the object. Once removed, coatings can be melted again for repeat use.

Solvent-based coatings won’t dry out, even when stored over a long time.

Water-based coatings are the most durable peel-away coatings we offer.

Protect tools, dies, and other parts during shipping and storage with these durable, removable coatings. After peeling, they leave a greasy film for continued corrosion protection. To apply, heat coating and dip the object. Once removed, coating can be melted again for repeat use.

These coatings are often used on castings, dies, and mirrors to prevent rust, abrasion, and moisture penetration.

Water-based coatings are low odor, so they’re a good option for use in enclosed areas. Apply with a brush, roller, or sprayer.

Protect metal parts from corrosion. Also known as rust-inhibiting film, these coatings can be removed with a simple degreaser or mineral spirits.

Wax coatings meet MIL-C-16173 for corrosion-resistant compounds that dry to thin, easily removable films. Grade 4 coatings dry to a nontacky finish that’s suitable for environments exposed to high humidity and chemicals. Grade 2 coatings dry to a slightly tacky, self-healing film that lubricates as it protects.

Mineral oil coatings don’t fully dry, so they leave a tacky film. Coating with a maximum temperature of 250° F lubricates as it protects and can be used as a start-up lubricant for stored machinery.

Coatings in a jug can be dipped, brushed, or sprayed.

Coatings that cannot be sold to the regions listed are restricted by product labeling requirements or exceed local regulatory limits on VOCs (volatile organic compounds).

A hard waxy film protects items from abrasion. Coatings provide long-lasting protection against rust and corrosion. They can be dipped, brushed, or sprayed onto surfaces and then removed with an alkaline cleaner.

These low-odor coatings form a waxy film similar to lube oil, so parts can remain coated for assembly. They can be dipped, brushed, or sprayed onto surfaces and then removed with an alkaline cleaner.

These coatings are often used in food-processing areas. They form a tacky film that provides long-lasting protection against rust and corrosion. Coatings can be dipped, brushed, or sprayed onto surfaces and then removed with an alkaline cleaner.