To remove these pins, thread a screw or tool into the tapped hole, then pull them out.

The flat side of these pins relieves trapped air, making them easier to insert in and remove from blind holes. To remove, thread a screw or tool into the tapped hole, then pull the pin out.

A slightly undersized shank makes these pins easy to install and replace. Also known as slip-fit and lock-screw locating pins, they are held in place by a separate lock screw.

These hinges without holes are spring loaded—pull the handle to retract the pin and disconnect a door; release the handle and the pin snaps back.

To make reconnecting doors easier than other pull-release quick-disconnect hinges, these have a keeper that holds the pin in a retracted position.

Squeeze the hinge handles together to retract the pin and disconnect a door; release the handles and the pin snaps back.

To retract the pin and disconnect a door, squeeze the hinge handles together. Release the handles and the pin snaps back.

The hinge pin is permanently attached to the frame leaf so you can quickly lift the door off the hinge without removing the pin.

A grease fitting makes these hinges easy to lubricate.

Plastic hinges are a lightweight alternative to metal hinges and provide smooth, silent operation.