About Casters and Wheels
More
About Battery Disposal
More
Leveling Plate Casters
Use screws or bolts to attach the mounting plate on these casters to a flat surface. Adjust the leveling pad to keep your equipment stationary and compensate for uneven floors.
Nylon wheels are impact- and wear-resistant. They work well on smooth surfaces. Polyurethane wheels combine the abrasion resistance of plastic with the shock-absorbing qualities of rubber. Their aluminum core adds strength to the wheel without sacrificing cushioning. Use them on smooth or rough floors and in areas with debris.
Casters with 304 stainless steel frame offer good corrosion resistance.
Ball bearings provide smooth swiveling. Double-ball bearings swivel more smoothly than ball bearings.
Kingpinless swivel construction distributes impact better than standard kingpin casters, enabling smooth swiveling and extending service life.
Turn the thumb wheel to lower or raise the leveling pad. Ratchet pulls out for easy adjustment and retracts out of the way when not in use. Nut adjustment requires a wrench to move the leveling pad.
For technical drawings and 3-D models, click on a part number.
Wheel | Adjustment | Mounting Plate | Screw | Frame | Swivel | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Wd. | Mount Ht. | Cap. per Caster, lbs. | Mechanism | Nut Thread Size  | Lg. | Wd. | Size | Lg. | Mounting Fasteners Included | Material | Color | Swivel Construction | Swivel Bearing Type | Each | |
Black Solid Nylon Plastic Wheels—Hard | ||||||||||||||||
| 1 5/8" | 3/4" | 2 13/16"-3 3/16" | 130 | Thumb Wheel | __ | 2 1/8" | 2 1/8" | M6 | 0.591" | Yes | Powder-Coated Aluminum | Black | Kingpin | Double Ball | 0000000 | 000000 |
| 1 5/8" | 3/4" | 2 13/16"-3 3/16" | 130 | Thumb Wheel | __ | 2 1/8" | 2 1/8" | M6 | 0.591" | Yes | Powder-Coated Aluminum | Ivory | Kingpin | Double Ball | 0000000 | 00000 |
Nonmarking Black Solid Nylon Plastic Wheels—Hard | ||||||||||||||||
| 2" | 15/16" | 3 1/4"-3 5/8" | 660 | Thumb Wheel | __ | 2 7/8" | 2 7/8" | M6 | 0.787" | Yes | Powder-Coated Aluminum | Ivory | Kingpinless | Ball | 00000000 | 00000 |
| 2" | 15/16" | 3 1/4"-3 5/8" | 660 | Thumb Wheel | __ | 2 7/8" | 2 7/8" | M6 | 0.787" | Yes | 304 Stainless Steel | __ | Kingpinless | Ball | 00000000 | 000000 |
| 2" | 15/16" | 3 1/4"-3 5/8" | 660 | Ratchet | __ | 2 7/8" | 2 7/8" | M6 | 0.787" | Yes | Powder-Coated Aluminum | Ivory | Kingpinless | Ball | 00000000 | 00000 |
| 2" | 15/16" | 3 1/4"-3 5/8" | 660 | Ratchet | __ | 2 7/8" | 2 7/8" | M6 | 0.787" | Yes | 304 Stainless Steel | __ | Kingpinless | Ball | 00000000 | 000000 |
| 2" | 1" | 3 1/4"-3 5/8" | 550 | Ratchet | __ | 2 7/8" | 2 7/8" | M6 | 9/16" | Yes | Powder-Coated Aluminum | Black | Kingpin | Double Ball | 00000000 | 00000 |
| 2" | 1" | 3 1/4"-3 5/8" | 550 | Ratchet | __ | 3 3/4" | 2 1/2" | M8 | 1" | Yes | Powder-Coated Aluminum | Ivory | Kingpin | Double Ball | 00000000 | 00000 |
| 2" | 1" | 3 1/4"-3 5/8" | 610 | Thumb Wheel | __ | 2 7/8" | 2 7/8" | M6 | 9/16" | Yes | Powder-Coated Aluminum | Black | Kingpin | Double Ball | 00000000 | 00000 |
| 2" | 1" | 3 1/4"-3 5/8" | 610 | Thumb Wheel | __ | 3 3/4" | 2 1/2" | M8 | 1" | Yes | Powder-Coated Aluminum | Ivory | Kingpin | Double Ball | 00000000 | 00000 |
| 2 1/2" | 1 1/8" | 4 1/16"-4 5/8" | 1,100 | Ratchet | __ | 3 9/16" | 3 9/16" | M8 | 13/16" | Yes | Powder-Coated Aluminum | Black | Kingpin | Double Ball | 00000000 | 00000 |
| 2 1/2" | 1 1/8" | 4 1/16"-4 5/8" | 1,200 | Thumb Wheel | __ | 3 9/16" | 3 9/16" | M8 | 13/16" | Yes | Powder-Coated Aluminum | Black | Kingpin | Double Ball | 00000000 | 00000 |
| 2 1/2" | 1 3/16" | 4 1/8"-4 5/8" | 1,320 | Thumb Wheel | __ | 3 9/16" | 3 9/16" | M8 | 0.984" | Yes | Powder-Coated Aluminum | Ivory | Kingpinless | Ball | 00000000 | 00000 |
| 2 1/2" | 1 3/16" | 4 1/8"-4 5/8" | 1,320 | Thumb Wheel | __ | 3 9/16" | 3 9/16" | M8 | 0.984" | Yes | 304 Stainless Steel | __ | Kingpinless | Ball | 0000000 | 000000 |
| 2 1/2" | 1 3/16" | 4 1/8"-4 5/8" | 1,320 | Ratchet | __ | 3 9/16" | 3 9/16" | M8 | 0.984" | Yes | Powder-Coated Aluminum | Ivory | Kingpinless | Ball | 00000000 | 00000 |
| 2 1/2" | 1 3/16" | 4 1/8"-4 5/8" | 1,320 | Ratchet | __ | 3 9/16" | 3 9/16" | M8 | 0.984" | Yes | 304 Stainless Steel | __ | Kingpinless | Ball | 0000000 | 000000 |
| 2 7/8" | 1 1/4" | 4 25/32"-5 1/2" | 2,200 | Nut | M16 | 3 3/4" | 3 3/4" | M10 | 0.984" | Yes | Powder-Coated Aluminum | Ivory | Kingpinless | Ball | 0000000 | 00000 |
| 2 7/8" | 1 1/4" | 4 13/16"-5 1/4" | 1,650 | Thumb Wheel | __ | 3 3/4" | 3 3/4" | M10 | 0.984" | Yes | Powder-Coated Aluminum | Ivory | Kingpinless | Ball | 0000000 | 00000 |
| 2 15/16" | 1 3/16" | 4 3/4"-5 3/16" | 1,750 | Thumb Wheel | __ | 3 3/4" | 3 3/4" | M10 | 13/16" | Yes | Powder-Coated Aluminum | Black | Kingpin | Double Ball | 0000000 | 00000 |
| 2 15/16" | 1 3/16" | 4 3/4"-5 3/16" | 1,750 | Thumb Wheel | __ | 4 1/2" | 4" | M10 | 1" | Yes | Powder-Coated Aluminum | Ivory | Kingpin | Double Ball | 00000000 | 00000 |
| 2 15/16" | 1 3/16" | 4 3/4"-5 3/16" | 2,200 | Nut | M16 | 3 3/4" | 3 3/4" | M10 | 13/16" | Yes | Powder-Coated Aluminum | Black | Kingpin | Double Ball | 0000000 | 000000 |
| 2 15/16" | 1 3/16" | 4 3/4"-5 3/16" | 2,200 | Nut | M16 | 4 1/2" | 4" | M10 | 1" | Yes | Powder-Coated Aluminum | Ivory | Kingpin | Double Ball | 00000000 | 000000 |
Nonmarking Blue Solid Nylon Plastic Wheels—Hard | ||||||||||||||||
| 3 1/2" | 2 3/16" | 5 3/16"-5 13/16" | 3,300 | Nut | M20 | 3 15/16" | 3 15/16" | M12 | 1 9/16" | Yes | Powder-Coated Aluminum | Black | Kingpin | Double Ball | 0000000 | 000000 |
| 3 3/4" | 2 3/16" | 5 1/8"-6 1/8" | 3,300 | Nut | M20 | 3 15/16" | 3 15/16" | M12 | 1.377" | Yes | Powder-Coated Aluminum | Ivory | Kingpinless | Ball | 0000000 | 000000 |
Nonmarking White Tread-on-Core Polyurethane Rubber Wheels—Hard | ||||||||||||||||
| 2" | 1" | 3 1/4"-3 5/8" | 550 | Ratchet | __ | 2 7/8" | 2 7/8" | M6 | 9/16" | Yes | Powder-Coated Aluminum | Ivory | Kingpin | Double Ball | 00000000 | 000000 |
| 2" | 1" | 3 1/4"-3 5/8" | 550 | Ratchet | __ | 3 3/4" | 2 1/2" | M8 | 1" | Yes | Powder-Coated Aluminum | Ivory | Kingpin | Double Ball | 00000000 | 000000 |
| 2" | 1" | 3 1/4"-3 5/8" | 610 | Thumb Wheel | __ | 2 7/8" | 2 7/8" | M6 | 9/16" | Yes | Powder-Coated Aluminum | Ivory | Kingpin | Double Ball | 00000000 | 000000 |
| 2" | 1" | 3 1/4"-3 5/8" | 610 | Thumb Wheel | __ | 3 3/4" | 2 1/2" | M8 | 1" | Yes | Powder-Coated Aluminum | Ivory | Kingpin | Double Ball | 00000000 | 000000 |
| 2 1/2" | 1 1/8" | 4 1/16"-4 5/8" | 1,100 | Ratchet | __ | 3 9/16" | 3 9/16" | M8 | 13/16" | Yes | Powder-Coated Aluminum | Ivory | Kingpin | Double Ball | 00000000 | 000000 |
| 2 1/2" | 1 1/8" | 4 1/16"-4 5/8" | 1,200 | Thumb Wheel | __ | 3 9/16" | 3 9/16" | M8 | 13/16" | Yes | Powder-Coated Aluminum | Ivory | Kingpin | Double Ball | 0000000 | 000000 |
| 2 15/16" | 1 3/16" | 4 3/4"-5 3/16" | 1,750 | Thumb Wheel | __ | 3 3/4" | 3 3/4" | M10 | 13/16" | Yes | Powder-Coated Aluminum | Ivory | Kingpin | Double Ball | 00000000 | 000000 |
| 2 15/16" | 1 3/16" | 4 3/4"-5 3/16" | 1,750 | Thumb Wheel | __ | 4 1/2" | 4" | M10 | 1" | Yes | Powder-Coated Aluminum | Ivory | Kingpin | Double Ball | 00000000 | 000000 |
Threaded-Stem Leveling Casters
Install these casters into a threaded hole and adjust the leveling pad to keep your equipment stationary and compensate for uneven floors. Wheels ride directly on the axle rather than on bearings, making them an economical choice for equipment not frequently moved. Casters have double-ball swivel bearings for the smoothest swiveling.
Nylon wheels are impact and wear resistant. They work well on smooth surfaces. Polyurethane wheels combine the abrasion resistance of plastic and the vibration absorption of rubber. Use them on smooth or rough floors and in areas with debris.
Turn the thumb wheel to lower or raise the leveling pad. Ratchet pulls out for easy adjustment and retracts out of the way when not in use. Nut adjustment requires a wrench to move the leveling pad.
Shielded bearings protect from dust and debris.
For technical drawings and 3-D models, click on a part number.
Wheel | Adjustment | Frame | Swivel | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Wd. | Mount Ht. | Cap. per Caster, lbs. | Hardness | Stem Lg. | Mechanism | Nut Thread Size | Swivel Bearing Seal Type | Material | Color | Each | |
3/8"-16 Thread Size | ||||||||||||
Nonmarking Black Solid Nylon Plastic Wheels—Hard | ||||||||||||
| 1 3/4" | 11/16" | 2 13/16"-3 3/16" | 220 | Durometer 90D | 3/4" | Thumb Wheel | __ | Shielded | Powder-Coated Aluminum | Ivory | 0000000 | 000000 |
| 1 3/4" | 11/16" | 2 13/16"-3 3/16" | 220 | Durometer 90D | 3/4" | Thumb Wheel | __ | Shielded | 304 Stainless Steel | __ | 0000000 | 000000 |
1/2"-13 Thread Size | ||||||||||||
Nonmarking Black Solid Nylon Plastic Wheels—Hard | ||||||||||||
| 2" | 15/16" | 3 5/16"-3 11/16" | 610 | Durometer 90D | 1 3/8" | Thumb Wheel | __ | Shielded | Powder-Coated Aluminum | Ivory | 0000000 | 00000 |
| 2" | 15/16" | 3 5/16"-3 11/16" | 660 | Durometer 90D | 1 3/8" | Thumb Wheel | __ | Shielded | 304 Stainless Steel | __ | 0000000 | 000000 |
| 2" | 1" | 3 1/4"-3 5/8" | 550 | Durometer 70D | 5/8" | Ratchet | __ | Open | Powder-Coated Aluminum | Ivory | 0000000 | 00000 |
| 2" | 1" | 3 1/4"-3 5/8" | 610 | Durometer 90D | 5/8" | Thumb Wheel | __ | Open | Powder-Coated Aluminum | Black | 0000000 | 00000 |
| 2 1/2" | 1 1/8" | 4 1/16"-4 5/8" | 1,200 | Durometer 90D | 5/8" | Thumb Wheel | __ | Open | Powder-Coated Aluminum | Black | 0000000 | 00000 |
| 2 1/2" | 1 3/16" | 4 1/32"-4 5/8" | 1,100 | Durometer 70D | 5/8" | Ratchet | __ | Open | Powder-Coated Aluminum | Ivory | 0000000 | 00000 |
| 2 1/2" | 1 3/16" | 4 1/8"-4 5/8" | 1,200 | Durometer 90D | 1 3/8" | Thumb Wheel | __ | Shielded | Powder-Coated Aluminum | Ivory | 0000000 | 00000 |
Nonmarking White Tread-on-Core Polyurethane Rubber Wheels—Hard | ||||||||||||
| 2" | 1" | 3 1/4"-3 5/8" | 550 | Durometer 70D | 5/8" | Ratchet | __ | Open | Powder-Coated Aluminum | Ivory | 00000000 | 000000 |
| 2" | 1" | 3 1/4"-3 5/8" | 610 | Durometer 70D | 5/8" | Thumb Wheel | __ | Open | Powder-Coated Aluminum | Ivory | 0000000 | 00000 |
| 2 1/2" | 1 1/8" | 4 1/16"-4 5/8" | 1,200 | Durometer 70D | 5/8" | Thumb Wheel | __ | Open | Powder-Coated Aluminum | Ivory | 0000000 | 000000 |
| 2 1/2" | 1 3/16" | 4 1/32"-4 5/8" | 1,100 | Durometer 70D | 5/8" | Ratchet | __ | Open | Powder-Coated Aluminum | Ivory | 0000000 | 000000 |
5/8"-11 Thread Size | ||||||||||||
Nonmarking Black Solid Nylon Plastic Wheels—Hard | ||||||||||||
| 2 7/8" | 1 1/4" | 4 3/4"-5 1/2" | 2,200 | Durometer 90D | 1 3/8" | Nut | M16 | Shielded | Powder-Coated Aluminum | Ivory | 0000000 | 00000 |
| 2 7/8" | 1 1/4" | 4 13/16"-5 1/4" | 1,650 | Durometer 90D | 1 3/8" | Thumb Wheel | __ | Shielded | Powder-Coated Aluminum | Ivory | 0000000 | 00000 |
Nonmarking White Tread-on-Core Polyurethane Rubber Wheels—Hard | ||||||||||||
| 3" | 1 3/16" | 4 3/4"-5 3/16" | 1,750 | Durometer 70D | 1 3/4" | Thumb Wheel | __ | Open | Powder-Coated Aluminum | Ivory | 0000000 | 000000 |
M8 Thread Size | ||||||||||||
Nonmarking Black Solid Nylon Plastic Wheels—Hard | ||||||||||||
| 1 3/4" | 11/16" | 2 13/16"-3 3/16" | 220 | Durometer 90D | 3/4" | Thumb Wheel | __ | Shielded | Powder-Coated Aluminum | Ivory | 0000000 | 00000 |
M12 Thread Size | ||||||||||||
Nonmarking Black Solid Nylon Plastic Wheels—Hard | ||||||||||||
| 2" | 15/16" | 3 5/16"-3 11/16" | 610 | Durometer 90D | 1 3/8" | Thumb Wheel | __ | Shielded | Powder-Coated Aluminum | Ivory | 0000000 | 00000 |
| 2" | 1" | 3 1/4"-3 5/8" | 550 | Durometer 70D | 1 3/16" | Ratchet | __ | Open | Powder-Coated Aluminum | Ivory | 0000000 | 00000 |
| 2" | 1" | 3 1/4"-3 5/8" | 610 | Durometer 90D | 7/8" | Thumb Wheel | __ | Open | Powder-Coated Aluminum | Black | 0000000 | 00000 |
| 2 1/2" | 1 1/8" | 4 1/16"-4 5/8" | 1,100 | Durometer 70D | 1 3/16" | Ratchet | __ | Open | Powder-Coated Aluminum | Ivory | 0000000 | 00000 |
| 2 1/2" | 1 1/8" | 4 1/16"-4 5/8" | 1,200 | Durometer 90D | 7/8" | Thumb Wheel | __ | Open | Powder-Coated Aluminum | Black | 0000000 | 00000 |
| 2 1/2" | 1 3/16" | 4 1/8"-4 5/8" | 1,200 | Durometer 90D | 1 3/8" | Thumb Wheel | __ | Shielded | Powder-Coated Aluminum | Ivory | 0000000 | 00000 |
Nonmarking White Tread-on-Core Polyurethane Rubber Wheels—Hard | ||||||||||||
| 2" | 1" | 3 1/4"-3 5/8" | 550 | Durometer 70D | 1 1/4" | Ratchet | __ | Open | Powder-Coated Aluminum | Ivory | 00000000 | 000000 |
| 2" | 1" | 3 1/4"-3 5/8" | 610 | Durometer 70D | 1 3/16" | Thumb Wheel | __ | Open | Powder-Coated Aluminum | Ivory | 00000000 | 000000 |
| 2 1/2" | 1 1/8" | 4 1/16"-4 5/8" | 1,100 | Durometer 70D | 1 3/16" | Ratchet | __ | Open | Powder-Coated Aluminum | Ivory | 0000000 | 000000 |
| 2 1/2" | 1 1/8" | 4 1/16"-4 5/8" | 1,200 | Durometer 70D | 1 3/16" | Thumb Wheel | __ | Open | Powder-Coated Aluminum | Ivory | 0000000 | 000000 |
M16 Thread Size | ||||||||||||
Nonmarking Black Solid Nylon Plastic Wheels—Hard | ||||||||||||
| 2 7/8" | 1 1/4" | 4 3/4"-5 1/2" | 2,200 | Durometer 90D | 1 5/16" | Nut | M16 | Shielded | Powder-Coated Aluminum | Ivory | 0000000 | 00000 |
| 2 7/8" | 1 1/4" | 4 13/16"-5 1/4" | 1,650 | Durometer 90D | 1 3/16" | Thumb Wheel | __ | Shielded | Powder-Coated Aluminum | Ivory | 0000000 | 00000 |
Nonmarking White Tread-on-Core Polyurethane Rubber Wheels—Hard | ||||||||||||
| 3" | 1 3/16" | 4 3/4"-5 3/16" | 1,750 | Durometer 70D | 15/16" | Thumb Wheel | __ | Open | Powder-Coated Aluminum | Ivory | 0000000 | 000000 |
Easy-Turn Leveling Plate Casters
The dual-wheel design of these casters provides better load distribution and easier turning than other leveling casters. Turn the nut to adjust the leveling pad to keep your equipment stationary and compensate for uneven floors. Casters have sealed double-ball bearings for the smoothest swiveling and protection from dust and debris.
Phenolic wheels are nonmarking and perform well at high temperatures. They roll best on smooth surfaces. Polyurethane wheels combine the abrasion resistance of plastic with the shock-absorbing qualities of rubber. Use them on smooth or rough floors and in areas with debris.
Wheels with sealed ball bearings are smooth rolling and have the best protection against dust and debris.
For technical drawings and 3-D models, click on a part number.
Wheel | Adjustment | Mounting Plate | Mounting Hole Ctr.-to-Ctr. | Wheel Bearing | Swivel | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Wd. | Mount Ht. | Cap. per Caster, lbs. | Hardness | Mechanism | Nut Thread Size | Lg. | Wd. | Lg. | Wd. | For Screw Size | Type | Seal Type | Frame Material | Each | |
Nonmarking Black Solid Phenolic Plastic Wheels—Hard | ||||||||||||||||
| 2 1/2" | 1" | 3 3/8"-4 3/8" | 500 | Durometer 95D | Nut | 1/2"-13 | 3" | 3" | 2 3/8" | 2 3/8" | 5/16" | Without Bearing | __ | 301 Stainless Steel | 0000000 | 0000000 |
| 3" | 1 1/4" | 4 1/8"-5 1/8" | 800 | Durometer 95D | Nut | 5/8"-11 | 3 7/8" | 3 7/8" | 3" | 3" | 3/8" | Without Bearing | __ | 301 Stainless Steel | 0000000 | 000000 |
Nonmarking Blue Solid Polyurethane Rubber Wheels—Hard | ||||||||||||||||
| 2 1/2" | 1" | 3 3/8"-4 3/8" | 500 | Durometer 75D | Nut | 1/2"-13 | 3" | 3" | 2 3/8" | 2 3/8" | 5/16" | Ball | Sealed | 301 Stainless Steel | 0000000 | 000000 |
| 3" | 1 1/4" | 4 1/8"-5 1/8" | 1,000 | Durometer 75D | Nut | 5/8"-11 | 3 7/8" | 3 7/8" | 3" | 3" | 3/8" | Ball | Sealed | 301 Stainless Steel | 0000000 | 000000 |
Floor Locks
Stabilize carts, trucks, workbenches, and other mobile equipment during loading and unloading. Floor locks bolt or weld to the underside of your equipment and have a spring-loaded base with a nonskid floor pad to keep equipment stationary.
Note: Floor locks are not load rated. They are designed to brake your equipment in place, not lift it off the floor.
Pivoting base compensates for uneven floors.
For technical drawings and 3-D models, click on a part number.
Ht. | Mounting Plate | Mounting Hole Ctr.-to-Ctr. | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Caster Mount Ht. | Extended | Retracted | Clearance | Style | Lg. | Wd. | Lg. (A) | Lg. (B) | Wd. (A) | Wd. (B) | Mounting Fasteners Included | For Screw Size | Color | Each | |
Painted Iron | |||||||||||||||
| 5 5/8"-5 7/8" | 5 5/8" | 4 9/16" | 1 5/16" | 1 | 4 13/16" | 4 1/4" | 3 5/8" | 3" | 3" | 2 5/8" | No | 3/8" | Gray | 00000000 | 0000000 |
| 7 1/4"-7 1/2" | 7 1/2" | 6" | 1 3/4" | 1 | 6 1/2" | 4 3/4" | 5 1/4" | 4 15/16" | 3 3/8" | 2 7/16" | No | 1/2" | Gray | 00000000 | 000000 |
| 10 1/4"-10 5/8" | 10 1/4" | 9 1/8" | 1 3/8" | 1 | 6 1/2" | 4 3/4" | 5 1/4" | 4 15/16" | 3 3/8" | 2 7/16" | No | 1/2" | Gray | 00000000 | 000000 |
 | | |
Mounting Plate Style 1 | Mounting Plate Style 2 |
Ht. | Mounting Plate | Mounting Hole Ctr.-to-Ctr. | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Caster Mount Ht. | Extended | Retracted | Clearance | Style | Lg. | Wd. | Ln. | Wd. | Lg. (A) | Lg. (B) | Wd. (A) | Wd. (B) | Mounting Fasteners Included | For Screw Size | Each | |
Zinc-Plated Steel | ||||||||||||||||
| 5 5/8" | 5 7/8" | 4 7/8" | 1" | 1 | 4 1/2" | 4" | __ | __ | 3 5/8" | 3" | 3" | 2 5/8" | No | 3/8" | 0000000 | 000000 |
| 6 1/2" | 6 3/4" | 5 3/4" | 1" | 1 | 4 1/2" | 4" | __ | __ | 3 5/8" | 3" | 3" | 2 5/8" | No | 3/8" | 0000000 | 00000 |
| 7 1/4" | 7 1/2" | 6 1/2" | 1" | 1 | 4 1/2" | 4" | __ | __ | 3 5/8" | 3" | 3" | 2 5/8" | No | 3/8" | 0000000 | 00000 |
| 7 3/8" | 7 5/8" | 6 3/8" | 1 1/4" | 2 | 5 1/2" | 5" | 4 1/2" | 4 1/8" | __ | __ | __ | __ | No | 3/8" | 0000000 | 000000 |
| 7 1/2" | 7 3/4" | 6 1/2" | 1 1/4" | 1 | 6 1/4" | 4 1/2" | __ | __ | 5 1/4" | 4 15/16" | 3 3/8" | 2 7/16" | No | 1/2" | 0000000 | 000000 |
| 7 1/2" | 7 3/4" | 6 3/4" | 1" | 1 | 4 1/2" | 4" | __ | __ | 3 5/8" | 3" | 3" | 2 5/8" | No | 3/8" | 0000000 | 00000 |
| 9 1/2" | 9 3/4" | 8 1/2" | 1 1/4" | 2 | 5 1/2" | 5" | 4 1/2" | 4 1/8" | __ | __ | __ | __ | No | 3/8" | 0000000 | 000000 |
| 9 1/2" | 9 3/4" | 8 3/4" | 1" | 1 | 4 1/2" | 4" | __ | __ | 3 5/8" | 3" | 3" | 2 5/8" | No | 3/8" | 0000000 | 00000 |
| 10 1/8" | 10 3/8" | 9 1/8" | 1 1/4" | 1 | 6 1/4" | 4 1/2" | __ | __ | 5 1/4" | 4 15/16" | 3 3/8" | 2 7/16" | No | 1/2" | 0000000 | 000000 |
| 10 1/8" | 10 3/8" | 9 3/8" | 1" | 1 | 4 1/2" | 4" | __ | __ | 3 5/8" | 3" | 3" | 2 5/8" | No | 3/8" | 0000000 | 00000 |
| 10 1/2" | 10 3/4" | 9 1/2" | 1 1/4" | 1 | 7 1/4" | 5" | __ | __ | 6 1/8" | 5 1/4" | 4 1/8" | 3 3/8" | No | 1/2" | 0000000 | 000000 |
304 Stainless Steel | ||||||||||||||||
| 5 5/8" | 5 5/8" | 4 1/2" | 1 1/8" | 1 | 4 1/2" | 4" | __ | __ | 3 5/8" | 3" | 3" | 2 5/8" | No | 3/8" | 0000000 | 000000 |
| 6 1/2" | 6 1/2" | 5 3/8" | 1 1/8" | 1 | 4 1/2" | 4" | __ | __ | 3 5/8" | 3" | 3" | 2 5/8" | No | 3/8" | 0000000 | 000000 |
| 7 1/2" | 7 1/2" | 6 1/2" | 1" | 1 | 4 1/2" | 4" | __ | __ | 3 5/8" | 3" | 3" | 2 5/8" | No | 3/8" | 0000000 | 000000 |
Ht. | Mounting Plate | Mounting Hole Ctr.-to-Ctr. | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Caster Mount Ht. | Extended | Retracted | Clearance | Style | Lg. | Wd. | Lg. (A) | Lg. (B) | Wd. (A) | Wd. (B) | Mounting Fasteners Included | For Screw Size | Each | |
Zinc-Plated Steel | ||||||||||||||
| 5 5/16"-5 1/2" | 5 5/8" | 4 7/8" | 3/4" | 1 | 4 5/8" | 3 3/4" | 3 5/8" | 3" | 3" | 2 5/8" | No | 3/8" | 0000000 | 000000 |
| 5 7/16"-5 5/8" | 5 3/4" | 5" | 3/4" | 1 | 4 5/8" | 3 3/4" | 3 5/8" | 3" | 3" | 2 5/8" | No | 3/8" | 0000000 | 00000 |
| 6 3/16"-6 3/8" | 6 1/2" | 5 3/4" | 3/4" | 1 | 4 5/8" | 3 3/4" | 3 5/8" | 3" | 3" | 2 5/8" | No | 3/8" | 0000000 | 00000 |
| 6 7/16"-6 5/8" | 6 3/4" | 6" | 3/4" | 1 | 4 5/8" | 3 3/4" | 3 5/8" | 3" | 3" | 2 5/8" | No | 3/8" | 0000000 | 00000 |
| 6 15/16"-7 1/8" | 7 1/4" | 6 1/2" | 3/4" | 1 | 4 5/8" | 3 3/4" | 3 5/8" | 3" | 3" | 2 5/8" | No | 3/8" | 0000000 | 00000 |
| 7 7/16"-7 5/8" | 7 3/4" | 7" | 3/4" | 1 | 4 5/8" | 3 3/4" | 3 5/8" | 3" | 3" | 2 5/8" | No | 3/8" | 0000000 | 00000 |
| 9 7/16"-9 5/8" | 9 3/4" | 9" | 3/4" | 1 | 4 5/8" | 3 3/4" | 3 5/8" | 3" | 3" | 2 5/8" | No | 3/8" | 0000000 | 00000 |
Ht. | Mounting Plate | Mounting Hole Ctr.-to-Ctr. | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Caster Mount Ht. | Extended | Retracted | Clearance | Style | Lg. | Wd. | Lg. | Wd. | Mounting Fasteners Included | For Screw Size | Color | Each | |
Painted Steel | |||||||||||||
| 5"-7" | 7 1/4" | 3 3/8" | 3 7/8" | 2 | 4" | 4" | 2 5/8" | 2 3/8" | No | 3/8" | Black | 0000000 | 0000000 |
Adjustable-Height Floor Locks
Set these floor locks to the height you need to compensate for uneven and sloped floors. Use them to stabilize carts, trucks, workbenches, and other mobile equipment during loading and unloading. Floor locks bolt to the underside of your equipment and have a spring-loaded base with a nonskid floor pad to keep equipment stationary.
Note: Floor locks are not load rated. They are designed to brake your equipment in place, not lift it off the floor.
For technical drawings and 3-D models, click on a part number.
Mounting Plate | Mounting Hole Ctr.-to-Ctr. | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| For Caster Mount Ht. | Ht. Range | Clearance | Lg. | Wd. | Lg. | Wd. | Mounting Fasteners Included | For Screw Size | Each | |
Side Retraction Pedal | ||||||||||
Aluminum | ||||||||||
| 6 1/2"-7 1/2" | 5 1/2"-8" | 2 1/2" | 4 3/4" | 3 3/4" | 3 5/8", 3" | 3", 2 5/8" | No | 3/8" | 0000000 | 0000000 |
| 8"-10 1/2" | 7"-11" | 4" | 4 3/4" | 3 3/4" | 3 5/8", 3" | 3", 2 5/8" | No | 3/8" | 0000000 | 000000 |
Side-Mount Floor Locks
These locks bolt or weld to the side of equipment that can't accommodate a floor lock underneath. They're compatible with a wide range of caster mount heights. Use them to stabilize carts, trucks, workbenches, and other mobile equipment during loading and unloading. Floor locks have a spring-loaded base with a nonskid floor pad to keep equipment stationary.
Note: Floor locks are not load rated. They are designed to brake your equipment in place, not lift it off the floor.
For technical drawings and 3-D models, click on a part number.
Ht. | Mounting Plate | Mounting Hole Ctr.-to-Ctr. | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Max. Caster Mount Ht. | Extended | Retracted | Clearance | Lg. | Wd. | Lg. | Wd. (A) | Wd. (B) | Mounting Fasteners Included | For Screw Size | Each | |
Left Side Mounting | ||||||||||||
Top Retraction Pedal | ||||||||||||
Chrome-PlatedSteel | ||||||||||||
| 11" | 11 1/8" | 8 7/8" | 2" | 4 1/2" | 6 1/2" | 2 29/32" | 4 13/32" | 3 19/32" | No | 3/8" | 00000000 | 000000 |
Right Side Mounting | ||||||||||||
Top Retraction Pedal | ||||||||||||
Chrome-PlatedSteel | ||||||||||||
| 11" | 11 1/8" | 8 7/8" | 2" | 4 1/2" | 6 1/2" | 2 29/32" | 4 13/32" | 3 19/32" | No | 3/8" | 000000000 | 00000 |
Leveling Jacks with Wheel
Mount these jacks to equipment to raise and level it. A swivel caster lets you reposition your load.
Side Mount—Slide the frame of your equipment through the mounting plate.
Through-Hole Mount—Mount jacks through a hole in the frame of your equipment and fasten the mounting plate. These jacks are commonly used with an A-frame trailer coupler.
Locking pin locks the jack in a vertical position; pull the pin to rotate the jack into a horizontal position when not in use.
Warning: Never use to support people or loads over people.
For technical drawings and 3-D models, click on a part number.
Capacity | For Frame | Mounting | Mounting Plate | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| tons | lbs. | Ht. | Max. Lift | O'all Ht. | Ht. | Dp. | Handle Lg. | Body Material | For Hole Dia. | Fasteners Included | No. of Holes | Hole Lg. | Hole Wd. | Lg. | Wd. | Wheel Material | Each | ||
Side Mount | |||||||||||||||||||
| A | 1/4 | 750 | 7 1/2"-23 1/2" | 16" | 27 7/8" | 0"-5" | 1 7/8"-2 7/8" | 5 1/2" | Steel | __ | Yes | __ | __ | __ | __ | __ | Plastic | 000000 | 0000000 |
| B | 1/2 | 1,000 | 10 13/16"-25 1/2" | 14 11/16" | 33 7/8" | 3"-5" | 2"-3" | 6 1/8" | Steel | __ | Yes | __ | __ | __ | __ | __ | Plastic | 0000000 | 000000 |
Side Mount with Locking Pin | |||||||||||||||||||
| C | 1/2 | 1,200 | 12 1/2"-22 1/2" | 10" | 28 1/8" | 2"-4" | 1 1/2"-3" | 6" | Steel | __ | Yes | __ | __ | __ | __ | __ | Plastic | 0000000 | 000000 |
| C | 3/4 | 1,500 | 12 7/8"-22 7/8" | 10" | 31 5/8" | 3"-5" | 2"-3" | 6 1/8" | Steel | __ | Yes | __ | __ | __ | __ | __ | Plastic | 0000000 | 000000 |
Through-Hole Mount | |||||||||||||||||||
| D | 1/2 | 1,200 | 8 5/8"-21 1/2" | 12 7/8" | 35 5/8" | __ | __ | 6 1/2" | Steel | 2 1/4" | No | 3 | 7/16" | 13/16" | 5 1/8" | 4 1/4" | Plastic | 0000000 | 000000 |
T-Slotted Framing Mounting Feet and Casters
Add mounting feet and casters to T-slotted framing structures to level equipment, anchor legs to the floor, or add mobility.
For technical drawings and 3-D models, click on a part number.
Hydraulic lift casters allow you to move heavy equipment, then set it in place on leveling feet. To use, mount the casters and pump on T-slotted framing and connect the casters to the pump with the included tubing. Use the hand crank to raise and lower the casters.
Swivel casters swivel 360° and have a brake.
Plate-mount casters are sized to mount directly to T-slotted rails with included fasteners.
For Rail Ht. | Wheel | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Single | Double, Quad | Triple | Dia. | Material | Lg. | Wd. | Cap., lbs. | Color | Brake/Lock Type | Includes | Each | |
Swivel—Plate Mount | ||||||||||||
Aluminum | ||||||||||||
| 1 1/2" 40mm 45mm | 3" 80mm 90mm | 4 1/2", 120mm | 3 1/8" | Plastic | 18 3/4" | 9 7/8" | 4,400 | Silver | Wheel Brake and Swivel Lock (Total Lock) | 4 Swivel Casters, Hydraulic Pump with Hand Crank, Hydraulic Tubing | 00000000 | 000000000 |
Large-Cell Batteries for Starting and Continuous Use
These dual-purpose batteries provide a surge of power to start automobiles and other vehicles, and they deliver power over a long period of time. They're deep cycle, so they can handle many charge/deep discharge cycles. Because they are wet-cell batteries and contain electrolyte in an unsealed container, they must be mounted upright. They may occasionally need to be filled with distilled water.
Reserve capacity is the number of minutes that a new, fully charged battery can continuously discharge at 25 amps at 80° F. Marine cranking amps is the maximum amps that a new, fully charged battery can continuously deliver for 30 seconds at 32° F.
Warning: Batteries should always be charged and discharged in a ventilated area.
| Voltage | Battery Size | Manufacturer Equivalent Number | Terminal Location | Capacity, amp-hrs. | Reserve Capacity, min. | Marine Cranking Amps | Thread Size | Ht. | Wd. | Dp. | Each | |
Wet-Cell Lead Acid | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
Post and Threaded Stud | ||||||||||||
| 12V DC | 27 | 27M | C | 100 | 160 | 730 | 5/16"-18 | 9.4" | 12" | 6.8" | 00000000 | 0000000 |