Squeeze-to-Open Bent-Nose Pliers
Squeeze the handles to open the jaws; release to snap them closed. Once closed, they stay clamped in place to leave your hands free. These pliers reach around closely spaced components and other obstructions to grip small workpieces. They have plastic grips for comfort.
Jaw | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Overall Lg. | Max. Capacity | Bend | Lg. (A) | Lg. (B) | Texture | Tip Thick. | Material | Each | |
Flat Jaws and Cushion Grip | |||||||||
| 9 1/4" | 1 1/4" | 35° | 9/16" | 3 1/16" | Serrated | 1/4" | Steel | 0000000 | 000000 |
Squeeze-to-Open Tweezers
Hold small parts without the need to apply pressure. Squeeze these tweezers to open the tips and release to close them.
Tweezers with offset tips keep whatever object they’re holding elevated when they’re set down on a surface. This is useful if you need both hands free.
Tweezers with round tips won’t nick or mar your object’s surface, but they don’t grip as tight as pointed tips. Tweezers with trapezoid tips give you a good grip on large, flat components. Tweezers with square tips work well if you need to grip thin sheets and labels.
Tweezers with hard fiber grip insulate against heat.
400 series stainless steel tweezers have good corrosion resistance and are mildly magnetic. Plastic-coated steel tweezers won’t mar delicate components.
Tip | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Wd. | Thick. | Angle | Overall Lg. | Material | Max. Temp., °F | Jaw Texture | Appearance | Safety Properties | Each | |
Standard Round Tips and Plain Grip | ||||||||||
| 0.060" | 0.030" | __ | 4 1/2" | 400 Series Stainless Steel | __ | Serrated | Polished | __ | 0000000 | 00000 |
| 0.160" | 0.120" | __ | 6 1/2" | Plastic-Coated Steel | __ | Smooth | Polished | __ | 00000000 | 00000 |
Standard Round Tips and Hard Fiber Grip | ||||||||||
| 0.030" | 0.047" | __ | 6 1/2" | 400 Series Stainless Steel | 400° | Smooth | Polished | Heat Protection | 0000000 | 0000 |
Standard Trapezoid Tips and Knurled Grip | ||||||||||
| 0.177" | 0.051" | __ | 6 1/4" | Steel | __ | Serrated | Polished | __ | 00000000 | 00000 |
Standard Square Tips and Plain Grip | ||||||||||
| 0.142" | 0.035" | __ | 6 1/2" | 400 Series Stainless Steel | __ | Serrated | Polished | __ | 0000000 | 0000 |
Offset Round Tips and Plain Grip | ||||||||||
| 0.185" | 0.067" | __ | 5 1/2" | 400 Series Stainless Steel | __ | Serrated | Polished | __ | 00000000 | 0000 |
Bent Round Tips and Hard Fiber Grip | ||||||||||
| 0.051" | 0.055" | 30° | 6 1/2" | 400 Series Stainless Steel | 400° | Smooth | Polished | Heat Protection | 0000000 | 0000 |
Squeeze-to-Open Tweezers Sets
 |  4 1/2" Lg. with Standard Round TIps |  6 1/2" Lg. with Bent Round Tips |
 6 1/2" Lg. with Standard Round TIps |  6 1/2" Lg. with Standard Square Tips |
These assorted tweezers hold small parts without the need to apply pressure. Squeeze to open the tips and release to close them. Tweezers are made of 400 series stainless steel, which has good corrosion resistance and is mildly magnetic.
| Number of Pieces | Includes | Jaw Texture | Grip Style | Appearance | Container Type | Each | |
400 Series Stainless Steel | |||||||
|---|---|---|---|---|---|---|---|
| 4 | 4 1/2" O'all Lg. Tweezers with 0.060" Wd. × 0.030" Thick. Round Tips 6 1/2" O'all Lg. Tweezers with 0.030" Wd. × 0.047" Thick. Round Tips 6 1/2" O'all Lg. Tweezers with 0.051" Wd. × 0.055" Thick. 30° Bent, Round Tips 6 1/2" O'all Lg. Tweezers with 0.142" Wd. × 0.035" Thick. Square Tips | Smooth/Serrated | Plain | Polished | Plastic Pouch | 0000000 | 000000 |
High-Precision Squeeze-to-Open Tweezers
Grip small objects without applying any pressure—the tips on these tweezers open when you squeeze them and close when you release. Swiss made to tight tolerances, they have the perfect tip alignment required for work under magnification. They’re 300 series stainless steel, so they have excellent corrosion resistance but their tips are less durable than those made of 400 series stainless. Commonly known as anti-magnetic tweezers, they are typically nonmagnetic but may become slightly magnetic with use.
Tweezers with slim tips allow more visibility of your work than standard tips. Tweezers with bent or curved tips reach over and around obstructions. Those with bent tips also have square ends for placing chips and electronic components on circuit boards. Also known as SMD (surface-mount device) tweezers.
Tweezers with pointed tips firmly grip an object but may nick or mar its surface. Tweezers with round tips won’t nick or mar your object’s surface, but they don’t grip as tight as pointed tips.
Tip | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Wd. | Thick. | Angle | Overall Lg. | Material | Tweezer Trade Number | Jaw Texture | Grip Style | Appearance | Each | |
Standard Pointed Tips | ||||||||||
| 0.004" | 0.004" | __ | 4 1/4" | 300 Series Stainless Steel | 4 | Smooth | Plain | Polished | 0000000 | 000000 |
| 0.007" | 0.004" | __ | 4 3/4" | 300 Series Stainless Steel | 3 | Smooth | Plain | Polished | 0000000 | 00000 |
Standard Round Tips | ||||||||||
| 0.075" | 0.005" | __ | 4 3/4" | 300 Series Stainless Steel | 2A | Smooth | Plain | Polished | 0000000 | 00000 |
Slim Pointed Tips | ||||||||||
| 0.004" | 0.004" | __ | 4 1/4" | 300 Series Stainless Steel | 5 | Smooth | Plain | Polished | 0000000 | 00000 |
Bent Square Tips | ||||||||||
| 0.028" | 0.014" | 10° | 4 1/2" | 300 Series Stainless Steel | SM104 | Smooth | Plain | Polished | 0000000 | 00000 |
Curved Square Tips | ||||||||||
| 0.009" | 0.007" | 45° | 4 1/2" | 300 Series Stainless Steel | 7 | Smooth | Plain | Polished | 0000000 | 00000 |
Locking Plier Spreaders
The jaws on these tools apply outward pressure for use as a spreader. Turn the crank handle to adjust the opening size; squeeze the handles to lock the clamp in place. Press the lever to release.
For technical drawings and 3-D models, click on a part number.
Inside Diameter Fixture Clamps
Secure a workpiece from the inside diameter, leaving the outside clear for machining. Machine these clamps to match the precise size and contours of your workpiece ID. Mount the clamp to your fixture with the included screws and place your workpiece over it. Turn the socket head cap screw to expand the clamp.
Top-actuated clamps tighten from the top of the clamp, so workpieces need a through hole.
Side-actuated clamps tighten from the side of the clamp, gripping parts without a through hole in the top.
For technical drawings and 3-D models, click on a part number.
Thread | Drive | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For ID Range | Max. Clamp Expansion | Ht. | Flange OD | Max. Clamping Force, lbs. | Size | Lg. | Size | Style | Mounting Fasteners Included | Material | Screw Material | Each | |
Top Actuated | |||||||||||||
| 0.16"-0.29" | 0.005" | 27/64" | 25/32" | 250 | 2-56 | 1/2" | 5/64" | Hex | Yes | Steel | Steel | 0000000 | 000000 |
| 0.28"-0.49" | 0.01" | 55/64" | 1 11/64" | 950 | 8-32 | 1" | 9/64" | Hex | Yes | Steel | Steel | 0000000 | 00000 |
| 0.48"-0.56" | 0.013" | 63/64" | 1 15/64" | 1,900 | 1/4"-20 | 1 1/4" | 3/16" | Hex | Yes | Steel | Steel | 0000000 | 00000 |
| 0.53"-0.79" | 0.015" | 63/64" | 1 15/32" | 2,500 | 5/16"-18 | 1 1/4" | 1/4" | Hex | Yes | Steel | Steel | 0000000 | 00000 |
| 0.71"-1.06" | 0.015" | 1 1/8" | 1 31/32" | 4,500 | 3/8"-16 | 1 1/2" | 5/16" | Hex | Yes | Steel | Steel | 0000000 | 00000 |
| 0.9"-1.39" | 0.015" | 1 1/4" | 2 13/64" | 5,900 | 1/2"-13 | 1 1/2" | 3/8" | Hex | Yes | Steel | Steel | 0000000 | 00000 |
| 1.15"-1.65" | 0.015" | 1 9/16" | 2 47/64" | 10,000 | 5/8"-11 | 1 3/4" | 1/2" | Hex | Yes | Steel | Steel | 0000000 | 00000 |
| 1.15"-2.03" | 0.015" | 1 9/16" | 2 31/32" | 10,000 | 5/8"-11 | 1 3/4" | 1/2" | Hex | Yes | Steel | Steel | 0000000 | 000000 |
| 1.15"-3.06" | 0.015" | 1 51/64" | 4 15/64" | 10,000 | 5/8"-11 | 2" | 1/2" | Hex | Yes | Steel | Steel | 0000000 | 000000 |
| 1.15"-4.06" | 0.015" | 1 51/64" | 5 15/64" | 10,000 | 5/8"-11 | 2" | 1/2" | Hex | Yes | Steel | Steel | 0000000 | 000000 |
| 1.15"-6.89" | 0.02" | 1 51/64" | 5 15/64" | 10,000 | 5/8"-11 | 2" | 1/2" | Hex | Yes | Steel | Steel | 0000000 | 000000 |
| 1.15"-9.85" | 0.08" | 1 51/64" | 6" | 6,000 | 5/8"-11 | 2" | 1/2" | Hex | Yes | Aluminum | Steel | 0000000 | 000000 |
Side Actuated | |||||||||||||
| 0.71"-1.12" | 0.012" | 1 5/8" | 1 31/32" | 4,000 | 3/8"-16 | 1 1/2" | 1/4" | Hex | Yes | Steel | Steel | 0000000 | 000000 |
Inside Diameter Fixture Clamps for Castings and Rough Parts
These clamps wedge against the workpiece ID to grip cast, unfinished, or uneven parts, leaving the outside clear for machining. Do not use these clamps on smooth or finished ID’s because they will leave a mark. The clamp’s screw tightens from the top of the clamp, so workpieces require a through hole. Thread the clamp into a tapped hole in your fixture and place your workpiece over it. Reach through the hole to turn the screw, expanding the clamp.
For technical drawings and 3-D models, click on a part number.
Thread | Drive | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For ID Range | Max. Clamp Expansion | Body Ht. | Overall Ht. | Max. Clamping Force, lbs. | Size | Pitch, mm | Lg., mm | Size, mm | Style | Mounting Fasteners Included | Material | Screw Material | Each | |
| 0.768"-0.945" | 0.178" | 23/64" | 29/64" | 450 | M4 | 0.7 | 12 | 3 mm | Hex | Yes | Steel | Steel | 0000000 | 000000 |
| 0.925"-1.142" | 0.217" | 33/64" | 43/64" | 1,120 | M6 | 1 | 18 | 5 mm | Hex | Yes | Steel | Steel | 0000000 | 00000 |
| 1.122"-1.417" | 0.295" | 43/64" | 7/8" | 2,000 | M8 | 1.25 | 25 | 6 mm | Hex | Yes | Steel | Steel | 0000000 | 00000 |
Trigger-Action Bar Clamps/Spreaders
Reverse the arms to use these clamps as spreaders. Press the trigger to slide the clamping arm along the bar. Release the trigger and squeeze the pistol-grip handle to lock the clamp in place.
For technical drawings and 3-D models, click on a part number.
Opening | Spreader Opening | ||||||
|---|---|---|---|---|---|---|---|
| Max. | Min. | Max. | Min. | Reach | Body Material | Each | |
300 lbs. Holding Capacity | |||||||
| 6" | 0" | 12 1/2" | 7 1/2" | 2 1/4" | Steel | 0000000 | 000000 |
| 12" | 0" | 18 1/2" | 7 1/2" | 2 1/4" | Steel | 0000000 | 00000 |
| 18" | 0" | 24 1/2" | 7 1/2" | 2 1/4" | Steel | 00000000 | 00000 |
| 24" | 0" | 30 1/2" | 7 1/2" | 2 1/4" | Steel | 00000000 | 00000 |
| 36" | 0" | 42 1/2" | 7 1/2" | 2 1/4" | Steel | 00000000 | 00000 |
600 lbs. Holding Capacity | |||||||
| 6" | 0" | 14 7/8" | 9 1/4" | 3 5/8" | Steel | 00000000 | 00000 |
| 12" | 0" | 20 1/2" | 9" | 2 3/4" | Steel | 00000000 | 00000 |
| 18" | 0" | 26 1/2" | 9" | 2 3/4" | Steel | 00000000 | 00000 |
| 24" | 0" | 32 1/2" | 9" | 2 3/4" | Steel | 00000000 | 00000 |
| 36" | 0" | 44 1/2" | 9" | 2 3/4" | Steel | 00000000 | 00000 |
| 50" | 0" | 58 1/2" | 9" | 2 3/4" | Steel | 00000000 | 00000 |
Parallel-Jaw Bar Clamps/Spreaders
The large, flat jaws remain parallel when clamping to apply even pressure without denting or marring the workpiece. Reverse the arms to use these clamps as spreaders. Pull the handle to lock or release the clamping arm.
For technical drawings and 3-D models, click on a part number.
Opening | Spreader Opening | |||||||
|---|---|---|---|---|---|---|---|---|
| Max. | Min. | Max. | Min. | Reach | Holding Capacity, lbs. | Body Material | Each | |
| 12" | 0" | 15 5/16" | 10 1/2" | 3 3/4" | 1,000 | Steel | 0000000 | 000000 |
| 18" | 0" | 21 1/2" | 10 1/2" | 3 3/4" | 1,000 | Steel | 0000000 | 00000 |
| 24" | 0" | 28 3/4" | 10 1/2" | 3 3/4" | 1,000 | Steel | 0000000 | 00000 |
| 40" | 0" | 44 1/2" | 10 1/2" | 3 3/4" | 1,000 | Steel | 0000000 | 00000 |
| 50" | 0" | 52 1/2" | 10 1/2" | 3 3/4" | 1,000 | Steel | 0000000 | 00000 |
Fast-Action Bar Clamps/Spreaders
Each arm slides freely for quick, one-handed positioning. They lock when the screws are tightened onto a workpiece. Reverse the arms to use these clamps as spreaders.
For technical drawings and 3-D models, click on a part number.
Pipe Joining and Welding Clamps
Hold pipe and fittings together for tack welding. These clamps can be used to join or weld two pipes of similar or different diameters, or they can be used to join a pipe to a flange. With a rugged build, they’re designed for use with heavy pipe.
Internal clamps don’t obstruct joining or welding, making the process faster and simpler. One side of these two-part clamps expands with a knob while the other expands with a hand bar, so you can set them at different diameters to join pipe and flanges of varying sizes.
Self-centering clamps consist of two clamps that share a center line even as you attach each to a different piece of pipe, so the pipes stay aligned with no manual adjustment needed.
Expanding Pliers for Soft Tubing
Stretch the end of plastic and rubber tubing to make room for fittings with the same or slightly larger diameter. Insert the tips into tubing and squeeze the handles to open the jaws. Made of stainless steel, these pliers resist corrosion, and they can be sterilized to prevent contaminating tubing lines.
Battery Terminal Spreaders/Cleaners
Also known as battery reamers, these tools spread open a battery cable clamp and clean the terminal all at once.
| Material | Each | |
| Steel | 000000 | 000000 |
Tube Expanders
Enlarge the end of a tube to allow a second piece of the same diameter to fit inside.
