Made from Grade 5 steel, these inch-sized nuts are suitable for most fastening applications.

Half as thick as regular hex nuts, these nuts fit into spaces with low height clearances. They are about half as strong as medium-strength steel, and are often used for light duty applications, such as securing access panels.

These nuts are half the height of standard hex nuts, and have closely spaced threads to prevent loosening from vibration. Half as strong as medium-strength steel nuts, they are often used for light-duty applications, such as fastening signs in place.

These nuts are about 25% stronger than medium-strength steel thin hex nuts. Available in inch thread sizes.

Made from Grade 2 steel, these nuts should be used for light duty fastening applications, such as securing access panels.

These nuts have good chemical resistance and may be mildly magnetic.

Useful in low-clearance applications, these metric nuts are roughly half the height of standard hex nuts, but aren’t as strong. All are 18-8 stainless steel, which is nearly as strong as steel but won’t rust in outdoor, washdown, and other corrosive environments.

Made with fine-pitch threads, vibration is less likely to loosen these metric nuts than those with coarse-pitch threads since the threads sit closer together. Also called jam nuts, they are roughly half the height of standard hex nuts, so they’re good for applications with low clearance.

Choose these nuts for their adherence to strict military standards for material and construction.

These metric nuts are made of 316 stainless steel and half as tall as regular hex nuts—use them around chemicals and salt water when space is limited.

These nuts are corrosion resistant in wet environments,electrically conductive, and nonmagnetic.

Made from brass, these metric nuts are corrosion resistant in wet environments, electrically conductive, and nonmagnetic. About half the height of standard hex nuts, they are useful in low-clearance applications but have less tensile strength.

Plastic nuts are chemical resistant, nonconductive, and lightweight.

One-third the weight of steel, aluminum nuts resist corrosion in wet environments.

Bronze nuts are stronger and more resistant to salt water than brass nuts.

Titanium nuts have a high strength-to-weight ratio and are resistant to acids and salt water.

These nuts are often used in conjunction with an extra-wide hex nut to fasten Grade 9 bolts in heavy machinery, such as earth-moving equipment.

Use these nuts for light duty fastening applications, such as securing access panels.

Stainless steel nuts have excellent corrosion resistance in most environments.

Brass nuts are resistant to corrosion in wet environments and electrically conductive.

These locknuts are about half the height of standard nylon-insert locknuts. Use them in light duty low-clearance applications or jam one against a hex nut to hold it in place.

Choose these locknuts for their adherence to strict military standards for material and construction.

These Grade 8 locknuts are about 25% stronger than medium-strength steel thin locknuts.

Grade 5 locknuts are suitable for fastening most machinery and equipment when used in conjunction with a standard hex nut.

These locknuts have good chemical resistance and may be mildly magnetic.

Choose these locknuts for their adherence to strict military standards for material and construction.

More corrosion resistant than 18-8 stainless steel locknuts, these have excellent resistance to chemicals and salt water.

Comparable in strength to Grade 8 bolts, these locknuts are about three times stronger than low-strength steel extra-wide thin locknuts.

Use these locknuts for light duty fastening applications, such as securing access panels.

These locknuts have good chemical resistance.

More corrosion resistant than 18-8 stainless steel locknuts, these have excellent resistance to chemicals and salt water.

Known for their strength, these steel locknuts are cadmium plated to resist corrosion in wet environments.

Stainless steel locknuts have excellent corrosion resistance in most environments.

About half the height and 10% wider than standard flex-top locknuts, use these locknuts in low-clearance applications or jam one against an extra-wide hex nut to hold it in place.

About two-thirds the height of standard steel-insert locknuts, use these locknuts in low-clearance applications or jam one against a hex nut to hold it in place.

Stainless steel panel nuts have excellent corrosion resistance in most environments.

These steel panel nuts are zinc plated for corrosion resistance.

Brass panel nuts are corrosion resistant in wet environments and electrically conductive.

These panel nuts are knurled to provide a secure grip for tightening and loosening by hand.

Made from 18-8 stainless steel, these metric thumb nuts have good chemical resistance and may be mildly magnetic.

These thumb nuts have good chemical resistance and may be mildly magnetic.

More corrosion resistant than 18-8 stainless steel thumb nuts, these have excellent resistance to chemicals and salt water.

These thumb nuts have an aluminum insert to withstand more torque than plastic thumb nuts during installation.

These nylon thumb nuts are chemical resistant, nonconductive, and lightweight.

Use these thumb nuts in low-clearance applications or jam one against another nut to hold it in place.

These nuts have a black-oxide finish for mild corrosion resistance in dry environments.

Stainless steel thumb nuts have excellent corrosion resistance in most environments.

These thumb nuts have good chemical resistance. The flange distributes pressure over a large area to reduce stress on your part.

These metric thumb nuts have good chemical resistance. The flange distributes pressure over a large area to reduce stress on your part.

More corrosion resistant than 18-8 stainless steel thumb nuts, these have excellent resistance to chemicals and salt water.

These thumb nuts are corrosion resistant in wet environments, electrically conductive, and nonmagnetic. The flange distributes pressure over a large area to reduce stress on your part.

These metric thumb nuts are corrosion resistant in wet environments, electrically conductive, and nonmagnetic. The flange distributes pressure over a large area to reduce stress on your part.

Tighten these thumb nuts with a wrench for more torque while fastening.

Two-thirds the height of typical square nuts and made of stainless steel, these metric nuts are designed for use in low-clearance applications in humid, damp, and washdown environments.

About half the strength and two-thirds the height of medium-strength steel square nuts, use these metric nuts in light duty, low-clearance applications.