Rigid Tubing | McMaster-Carr

	REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration, Evaluation, Authorization and Restriction of Chemicals)

REACH Compliant

	Minimum Temperature Minimum Temperature

-400° F or less

	Type Type


Pipe	Connector

Conduit	Adapter

Reducing Adapter	Bushing

Grommet	Grounding Clamp

Locknut	Reducer

Reducing Washer

	Hardness Hardness

	Hardness Rating Hardness Rating

	Maximum Pressure Maximum Pressure

	Pipe Size Pipe Size

1/8
1/4
3/8
1/2
3/4
1
1 1/4
1 1/2
2
2 1/2
3
3 1/2
4
5
6
8
10
12

	Clarity Clarity

7,412 Products

Plastic and Rubber Tubing for Flow

High-Pressure Hard Plastic Tubing for Air and Water

Excellent strength and durability allow this tubing to handle high-pressure air and water applications up to 950 psi.

Moisture-Resistant Hard Plastic
Tubing for Air and Water

Made of moisture-resistant plastic, this tubing won't soften and lose strength, even in high-humidity environments.

Hard Plastic Tubing for Food and Beverage

Strong, hard walls give this tubing extra support in high-pressure and vacuum applications.

UV-Resistant Hard Plastic Tubing for Chemicals

Ultraviolet light won’t cause this tubing to degrade or deteriorate.

Crack-Resistant Hard Plastic Tubing for Chemicals

You don’t have to worry about this tubing cracking due to stress or impact—even over a wide range of temperatures.

Hard Plastic Tubing for Drinking Water

This tubing has hard walls like copper tubing, but is lighter in weight and easier to install. It connects to fittings with no heat or soldering required. Tubing meets NSF/ANSI Standard 61 for drinking water.

Metal Tubing for Flow

Rigid Aluminum Tubing

Unlike other aluminum tubing, this tubing is rigid and will not bend.

General Purpose Aluminum Tubing

Aluminum tubing is lightweight with good corrosion resistance and weldability.

Easy-Bend Aluminum Tubing

Bend this tubing into the shape you need without special tools or elbow fittings.

Ultra-Corrosion-Resistant Aluminum Tubing

Commonly used in marine applications, this tubing contains magnesium for extra corrosion resistance.

Mil. Spec. Aluminum Tubing

This tubing meets MIL-T-7081 standards.

Smooth-Bore Seamless Stainless Steel Tubing

This tubing has a seamless construction with no weld bead for unrestricted flow and is stronger than welded tubing.

Welded Stainless Steel Tubing

When your application does not require a smooth interior, this tubing is an economical choice.

Precision Stainless Steel Tubing

This tubing is made to tighter tolerances than other stainless steel tubing.

Extreme-Pressure Stainless Steel Tubing

This tubing is suitable for extreme-pressure applications reaching 15,000 psi—the highest pressure rating of all the tubing we offer.

Mil. Spec. Stainless Steel Tubing

A titanium additive gives this tubing excellent strength and superior corrosion resistance. It meets MIL-T-8808.

Extra-Hard Stainless Steel Tubing

Compared to other stainless steel tubing, this tubing is harder, stronger, and more durable.

Stainless Steel Tubing for Corrosive Gases

A thin layer of silicon on the interior provides a smooth surface and offers protection against corrosive gases.

Cleaned and Capped Stainless Steel Tubing

This tubing comes cleaned and capped to prevent moisture and dirt from contaminating the inside.

Miniature Stainless Steel Tubing

Also known as hypodermic or needle tubing, this tubing has thin walls and is made to tight tolerances for use in precision applications.

Miniature Stainless Steel Tubing with 90° Bend

This tubing has a 90° bend that holds its shape.

Miniature Stainless Steel Tubing with Polished Exterior

The outside of this tubing is polished to a high-luster finish for a shiny appearance.

Extreme-Pressure Miniature Stainless Steel Tubing

This tubing withstands high pressures up to 13,700 psi. It is also known as capillary tubing.

Miniature Stainless Steel Tubing for Corrosive Gases

A thin layer of silicon on the interior provides a smooth surface and offers protection against corrosive gases.

High-Polish Stainless Steel Tubing
for Food, Beverage, and Dairy

The interior and exterior are polished to a high-luster finish to resist particle buildup and allow for easy cleaning.

High-Polish Stainless Steel Tubing
for Pharmaceuticals with Certification

This premium-grade tubing is polished to a 20 Ra or 15 Ra finish on the inside to reduce particle buildup and allow for easy cleaning.

Ultra-High-Polish Stainless
Steel Tubing with Certification

Polished to a 10 Ra finish on the inside, this tubing has the smoothest interior of any tubing we offer. It is commonly used in semiconductor applications.

Brass Tubing

A soft metal frequently used with air, gasoline, natural gas, propane, and plumbing applications. Tubing is not as corrosion resistant as stainless steel.

Welded Steel Tubing

Tubing is welded with a smoothed weld bead on the inside to reduce particle buildup. It is also known as DOM (drawn over mandrel) tubing.

Smooth-Bore Seamless Steel Tubing

Seamless construction with no weld bead gives this tubing an interior with unrestricted flow. It can be flared without splitting.

Vacuum-Rated Large-Diameter Steel Tubing

This tubing has the strength to withstand vacuum applications up to 29" Hg.

Corrosion-Resistant Steel Tubing

A thin layer of zinc yellow-chromate gives this tubing extra corrosion resistance, making it an economical alternative to stainless steel.

Precision Steel Tubing

With the lowest OD tolerance of all our steel tubing, this tubing is designed for precision applications.

High-Pressure Smooth-Bore Seamless Titanium Tubing

Seamless construction with no weld bead gives this tubing an interior with unrestricted flow. It is stronger than welded tubing and can be flared without splitting.

Welded Titanium Tubing

When your application does not require a smooth interior, this tubing is an economical choice. It has a weld bead on the inside.

Super-Corrosion-Resistant Nickel Tubing

Run corrosive substances through this tubing without worrying about pitting and stress cracking. It is also known as Hastelloy.

Copper Tubing with Coated Interior

The inside of this tubing is lined with 99% pure tin for added corrosion resistance.

Copper Tubing with Coated
Exterior for Natural and LP Gas

This tubing has special markings to identify it as a gas line.

High-Temperature Nickel Tubing

This tubing can withstand temperatures up to 1200° F—the highest temperature rating of all the non-stainless steel tubing we offer. It is also known as Inconel.

Acid-Resistant Nickel Tubing

This tubing won't degrade, even when used with harsh acids. It is also known as Monel.

Plastic Pipe and Pipe Fittings

Standard-Wall Plastic Pipe for Water

Connect this pipe to standard-wall plastic pipe fittings in low- to medium-pressure applications up to 810 psi. It is typically used in residential and commercial plumbing and water supply applications.

Thick-Wall Plastic Pipe for Water

Connect to thick-wall plastic pipe fittings for use in heavy duty industrial plumbing and water supply applications, such as water processing, waste water treatment, and irrigation. Pipe can handle pressures up to 900 psi.

UV-Resistant Thick-Wall PVC Pipe for Water

With thicker, stronger walls than standard-wall pipe, this Schedule 80 pipe can handle heavy duty industrial plumbing and water supply applications, such as water processing, waste water treatment, and irrigation. Use for pressures up to 550 psi. Suitable for outdoor environments, it contains an additive that protects against the damaging effects of ultraviolet light. Connect to UV-resistant PVC pipe fittings.

UV-Resistant Standard-Wall PVC Pipe for Water

This Schedule 40 pipe is typically used in low-pressure residential and commercial plumbing and water supply applications. It can handle pressures up to 300 psi. Suitable for outdoor environments, it contains an additive that protects against the damaging effects of ultraviolet light. Connect to UV-resistant PVC pipe fittings.

CPVC Pipe for Hot Water

Connect to CPVC pipe fittings for use in high-temperature plumbing and water supply applications up to 170° or 200° F.

Underground PVC Pipe for Drain, Waste, and Vent

This pipe has thinner walls than Schedule 40 pipe, so it’s lighter in weight and has more space on the inside for high-flow applications, such as underground gravity-flow sewer and storm drainage lines.

UV-Resistant Polypropylene Pipe for Chemicals

This polypropylene pipe resists the damaging effects of ultraviolet light, so it’s suitable for outdoor use. It has the chemical resistance to withstand acids, solvents, and other harsh substances.

Flame-Retardant PVDF Pipe
Nipples and Pipe for Chemicals

Pipe meets UL 94 V-0 for flame retardance to delay the spread of flames to valuable equipment. It is made of PVDF, which is comparable to Kynar, and has the chemical resistance to stand up to solvents and other harsh substances.

High-Temperature PTFE Pipe
Nipples and Pipe for Chemicals

This PTFE pipe can withstand a wider temperature range than any of our other plastic pipe for chemicals. It is commonly used in high-purity chemical flow processes, such as semiconductor and clean room applications.

Fiberglass Pipe for Corrosive Chemicals

With excellent corrosion resistance, this pipe can handle a wide range of acids and other highly-corrosive chemicals. Use in metal surface treating applications, plating solution lines, and other chemical process applications. Layers of fiberglass give this pipe better strength and durability than any of our other pipe for chemicals.

Easy-Access CPVC Pipe for Chemicals

Also known as Victaulic pipe, this pipe has grooved ends that connect to fittings and flanges with a clamp, so you can access your line for routine maintenance. It is CPVC, which has excellent chemical resistance to withstand a variety of salt solutions, acids, and other harsh substances.

Drain, Waste, and Vent ABS Pipe for Chemicals

This pipe is an economical choice for gravity-flow chemical waste systems. Pipe is ABS plastic, which has excellent strength and impact resistance and good chemical resistance.

Gravity-Flow CPVC Pipe for Corrosive Chemical Waste

Use this pipe in gravity-flow applications that involve highly-corrosive chemicals–it is NSF certified for use in corrosive waste systems. Pipe is made of CPVC, which has better chemical resistance than ABS plastic to stand up to acids and other harsh substances.

Clear Plastic

Clear Impact-Resistant Polycarbonate Tubes

At only half the weight of glass, polycarbonate maintains excellent impact resistance across a wide temperature range. It's comparable to Lexan, Hyzod, Tuffak, and Makrolon.

Clear Scratch- and UV-Resistant Cast Acrylic Tubes

Cast acrylic is easier to machine than extruded acrylic. It's comparable to Lucite and Plexiglas® Acrylic.

Clear Scratch- and UV-Resistant Acrylic Tubes

This extruded acrylic offers similar performance as cast acrylic at a lower cost.

Clear Easy-to-Form PETG Tubes

PETG can be formed into complex shapes without sacrificing durability.

Clear Cellulose Tubes

Widely used as shipping tubes, this cellulose is also known as butyrate.

Plastic

Wear-Resistant Easy-to-Machine
Delrin® Acetal Resin Tubes

Delrin® acetal resin, also known as acetal homopolymer, is stronger and stiffer than acetal copolymer.

Slippery Wear-Resistant Easy-to-Machine
Delrin® Acetal AF Resin Tubes

The addition of PTFE provides a more slippery, wear-resistant surface than standard Delrin® acetal resin. It’s commonly fabricated into pump components, gears, and bearings.

Wear-Resistant Easy-to-Machine Acetal Tubes

An economical alternative to Delrin® acetal resin, this acetal copolymer offers similar wear resistance.

Wear-Resistant Nylon Tubes

Also known as nylon 6/6, this general purpose material is often used for bearings, gears, valve seats, and other high-wear parts.

MDS-Filled Easy-to-Machine
Wear-Resistant Cast Nylon Tubes

The addition of MDS gives these tubes exceptional wear resistance along with a self-lubricating surface. They're made of cast nylon 6, making them easier to machine and better electrical insulators than other MDS-filled nylon tubes.

Easy-to-Machine Wear-Resistant Cast Nylon Tubes

This cast nylon 6 material is easier to machine than other types of nylon. It’s comparable to Nylatron and Nycast.

Heat-Stabilized Easy-to-Machine
Wear-Resistant Cast Nylon Tubes

A good choice for making sprockets and pulleys, these cast nylon 6 tubes withstand higher temperatures and are easier to machine than standard nylon 6/6 tubes.

Oil-Filled Easy-to-Machine
Wear-Resistant Cast Nylon Tubes

This nylon stays lubricated over time because it’s filled with oil. Use it to fabricate parts for hard-to-reach places where adding lubricants would be difficult.

Polypropylene Tubes

Because this polypropylene resists swelling when exposed to water, it’s often fabricated into containers and parts for laboratory equipment.

Impact-Resistant Easy-to-Form ABS Tubes

Because ABS maintains its toughness even after thermoforming, it’s often made into storage cases, tote trays, equipment housings, and protective gear.

Chemical-Resistant PVC Tubes

Because PVC resists many acids and alkalies, it’s widely used for tanks and in chemical-processing applications. Also known as PVC Type 1.

High-Temperature CPVC Tubes

CPVC is just as chemical resistant as standard PVC Type 1 and can handle hotter temperatures up to 200° F.

Slippery UHMW Polyethylene Tubes

In addition to a low-friction surface that prevents sticking and binding, this tough material is impact and wear resistant to handle the scuffs, scrapes, and strikes that other plastics can’t.

Wear- and Chemical-Resistant PEEK Tubes

Not only does PEEK provide superior wear resistance in repetitive processes, it is also resists wear caused by abrasion. PEEK can be used as a lightweight substitute for metal parts in chemical-processing applications.

Durable Glass-Filled Chemical-Resistant
Slippery PTFE Tubes

This glass-filled PTFE is more rigid than standard PTFE for increased durability in high-stress applications.

Ultra-Strength Lightweight Carbon Fiber

Ultra-Strength Lightweight Carbon Fiber Round Tubes

Often used in place of aluminum for structural frames, machinery components, and robotics, these tubes are lighter in weight and almost as rigid.

Telescoping Ultra-Strength Lightweight
Carbon Fiber Hexagonal Tubes

Fit these lightweight tubes inside each other to create adjustable tubes for structural framing, machinery components, and robotics.

Ultra-Strength Lightweight Carbon Fiber Square Tubes

Mount these lightweight tubes to flat surfaces in place of aluminum to create structural frames, machinery components, and robotics.

Rigid Ultra-Strength Lightweight
Carbon Fiber Round Tubes

Often used for structural framing, machinery components, and robotics, these carbon fiber tubes are as stiff as steel yet a fraction of the weight.

Garolite

Economical Electrical-Insulating Garolite XX Tubes

Stronger than Garolite CE with better electrical-insulating properties, Garolite XX is often fabricated into low-cost electrical components.

Easy-to-Machine Garolite LE Tubes

Using nothing more than standard high-speed steel tooling, Garolite LE can be machined into intricate parts.

Easy-to-Machine Garolite LE Rectangular Tubes

Easily turn these rectangular tubes into parts for transformers and switchgears using high-speed tooling.

Multipurpose Flame-Retardant
Garolite G-10/FR4 Tubes

A good all-around choice, Garolite G-10/FR4 is strong, machinable, and electrically insulating. It meets UL 94 V-0 for flame retardance.

Multipurpose Flame-Retardant
Garolite G-10/FR4 Rectangular Tubes

These rectangular tubes are flame retardant, machinable, and electrically insulating.

Economical Garolite CE Tubes

Garolite CE is often fabricated into parts where high strength is not required.

Halogen-Free Garolite G-10 Tubes

Use Garolite G-10 in place of Garolite G-10/FR4 for applications that are sensitive to halogen, such as in nuclear plants. It's strong, machinable, and electrically insulating.

Flame-Retardant High-Temperature
Garolite G-11/FR5 Tubes

A flame-retardant version of Garolite G-11, these tubes are commonly used to make bushings, standoffs, and spacers for areas with high temperatures. All are stronger and resist heat better than Garolite G-10/FR4.

Electrical-Insulating Garolite XXX

More electrically insulating than Garolite XX, these tubes are often machined into insulating washers, bushings, transformer spacers, and parts of terminal boards.

Ultra-Low-Temperature Garolite G-10 CR Tubes

Rated for temperatures down to -450° F, this Garolite G-10 CR performs better in cryogenic applications than other glass epoxies.

Ultra-High-Temperature
Impact-Resistant Garolite Tubes

Used in turbine bearings, downpipe gaskets, and other machinery, these Garolite tubes withstand heavy impacts and temperatures as high as 500° F.

Fiberglass

Structural FRP Fiberglass Round Tubes

An alternative to wood in structural applications, FRP fiberglass is strong and lightweight.

Structural FRP Fiberglass Square Tubes

An alternative to wood in structural applications, FRP fiberglass is strong and lightweight.

Arc-Resistant GPO3 Fiberglass Round Tubes

Use these round GPO3 fiberglass tubes for electrical applications in humid environments.

Arc-Resistant GPO3 Fiberglass Square Tubes

Route and insulate wire using these square fiberglass tubes, which fit better along edges and around corners than round tubes.

Easy-to-Machine Hard Fiber Tubes

Hard fiber is the easiest composite to machine, making it good for creating custom parts. Also known as vulcanized fiber.

Steel

Low-Carbon Steel Round Tubes

Also known as mild steel, low-carbon steel is easy to machine, form, and weld. It's widely fabricated into parts that don’t require high strength.

Low-Carbon Steel Rectangular Tubes

Also known as mild steel, low-carbon steel is easy to machine, form, and weld. It's widely fabricated into parts that don’t require high strength.

Ultra-Strength Carbon Steel (AHSS) Round Tubes

The same steel used in automobile bodies, this AHSS (advanced high-strength steel) allows you to fabricate high-strength parts using thinner material than you could with other types of steel. It is formable, weldable, and more economical than alloy steel.

Hard Wear-Resistant 52100 Alloy Steel Tubes

Easier to machine than 52100 alloy steel rods, these extremely hard and wear-resistant tubes are often used to create bearings, bushings, and other cylindrical parts that are under constant stress. They’re also known as chrome steel.

Easy-to-Weld 4130 Alloy Steel Round Tubes

4130 alloy steel has a low carbon content that provides good weldability. It's often used for gears, fasteners, and structural applications.

Easy-to-Weld 4130 Alloy Steel Rectangular Tubes

4130 alloy steel has a low carbon content that provides good weldability. It's often used for structural applications.

Multipurpose 4140 Alloy Steel Tubes

Also known as chrome-moly steel, this versatile 4140 alloy steel is used for a wide range of parts, such as axles, shafts, collets, and die holders. It resists fracturing from repeated stress.

Easy-to-Machine Gray Cast Iron Tubes

Gray cast iron machines faster with less wear on cutting tools than most types of steel. It's often fabricated into gears, pulleys, rollers, and bushings.

Aluminum

Multipurpose 6061 Aluminum Round Tubes

The most widely used aluminum, 6061 is fabricated into everything from pipe fittings and containers to automotive and aerospace parts. It is strong and corrosion resistant, plus it's easy to machine and weld.

Anodized Multipurpose 6061 Aluminum Round Tubes

An anodized coating forms a bond to the inside, outside, and ends of these tubes to improve wear and corrosion resistance.

Polished Multipurpose 6061 Aluminum Round Tubes

Polished on the outside to a #8 reflective, mirror-like finish, these tubes have no visible grain lines.

Multipurpose 6061 Aluminum Rectangular Tubes

Multipurpose 6061 Aluminum Hex Tubes

Architectural 6063 Aluminum Round Tubes

More corrosion resistant and easier to form than multipurpose 6061 aluminum, 6063 is primarily used for exterior railings, decorative trim, and door frames.

Anodized Architectural 6063 Aluminum Round Tubes

The outside of these tubes is anodized to improve wear and corrosion resistance.

Architectural 6063 Aluminum Rectangular Tubes

More corrosion resistant and easier to form than multipurpose 6061 aluminum, 6063 is primarily used for exterior railings, decorative trim, and door frames.

Corrosion-Resistant 3003 Aluminum Tubes

3003 aluminum stands up to outdoor use, as well as exposure to chemicals. It offers a good combination of strength, formability, and weldability. It's often used for storage tanks, heat exchangers, and general sheet metal work.

Telescoping Corrosion-Resistant 3003 Aluminum Tubes

These tubes are sized so that each tube fits into the next larger size.

Easy-to-Weld 5052 Aluminum Tubes

Known for being one of the easiest types of aluminum to weld, 5052 is also recognized for its ability to resist salt water. It's widely used for the bodies of boats, buses, trucks, and trailers, as well as for chemical drums.

Easy-to-Form Marine-Grade 5086 Aluminum Tubes

5086 aluminum is used on ships, oil rigs, tanks, and pressure vessels because of its excellent saltwater resistance and formability.

High-Strength 2024 Aluminum Tubes

While 2024 aluminum was initially designed for structural components in aircraft, it's now widely used when a high strength-to-weight ratio is needed, such as for gears, shafts, and fasteners. It offers similar performance to 7075 aluminum, but it’s not as strong.

Copper, Brass, and Bronze

Weldable 954 Bearing Bronze Tubes

954 bronze contains a minimum of 10% aluminum for strength and weldability. It is also known as aluminum bronze. It's widely used for bearings, bushings, valve bodies, and worm gears. The strength of this material increases with heat treating.

932 Bearing Bronze Tubes

Offering excellent antifriction qualities, 932 bronze also offers good strength and wear resistance. It's also known as SAE 660 and is often used for bearings, bushings, and thrust washers.

Oil-Filled 841 Bearing Bronze Tubes

Powdered bronze is pressed and then impregnated with SAE 30 oil to make this material self-lubricating.

High-Temperature Graphite-Filled
841 Bearing Bronze Tubes

An excellent alternative to oil-filled bronze, graphite-filled bronze provides dry lubrication in temperatures as high as 700° F.

High-Strength 863 Bearing Bronze Tubes

Frequently called manganese brass, 863 bronze can handle heavy loads and high speeds when properly lubricated.

Easy-to-Machine 936 Bearing Bronze Tubes

An easier-to-machine alternative to 932 bronze, 936 also has better corrosion resistance. It's also called modified SAE 64.

Ultra-Formable 260 Brass Round Tubes

The most formable brass we offer, 260 offers better weldability than 300 series brass but it’s not as machinable. Sometimes called cartridge brass, it's commonly used for ammunition casings, radiator components, and decorative door hardware.

Ultra-Formable 260 Brass Rectangular Tubes

Ultra-Formable 260 Brass Hex Tubes

High-Strength 330 Brass

Offering the highest yield strength of all our brass, 330 has a low lead content for a good balance of machinability and formability. It's used for fire station poles, pump cylinder lines, and plumbing accessories.

Weldable 122 Copper Tubes

The addition of phosphorus makes 122 copper easier to weld and braze than 110 copper. It has excellent resistance to corrosion caused by water, soil, and weather, making it the go-to material for plumbing and underground applications.

Super-Conductive 101 Copper Tubes

With 99.99% copper content, 101 copper has higher purity than 110 copper, resulting in superior electrical conductivity. It's commonly called OFE and OFHC copper. Use it in electrical applications, such as for coaxial cables and terminal lugs.

Marine-Grade Copper Nickel Tubes

Commonly used in water treatment plants, these tubes withstand salt water and can be used to make shims, ferrules, and washers.

Stainless Steel

Tight-Tolerance Hardened 440C Stainless Steel

With a diameter that’s held to a close tolerance, this material is hardened for increased wear and abrasion resistance.

Textured Multipurpose 304 Stainless Steel

The textured surface hides fingerprints and dents. This material is widely used in decorative applications, such as partitions and handrails.

Multipurpose 304 Stainless Steel

From cookware to chemical-processing equipment, 304 stainless steel is a good all-around choice for a wide range of applications.

Polished Multipurpose 304 Stainless Steel

Polished to either a brushed or mirror-like finish, this material is often used to fabricate decorative enclosures and industrial workstations.

Corrosion-Resistant 316 Stainless Steel

The addition of molybdenum gives 316 stainless steel excellent corrosion resistance. Use it in a variety of marine and chemical-processing applications.

Easy-to-Weld Grade 9 Titanium

Grade 9 titanium has less aluminum and vanadium than Grade 5, so it's easier to weld but not as strong.

Clear Glass, Mica, and Ceramic

Borosilicate Glass Tubes

Also called Pyrex and Schott glass, these glass tubes resist clouding and pitting and are highly chemical and heat resistant.

Pressure-Rated Borosilicate Glass Tubes

These short glass tubes can be used as glass bowls in oil dispensers.

Ultra-High-Temperature Quartz Glass Tubes

Blistering temperatures won’t melt these quartz tubes, and rapid temperature shifts won’t cause them to crack.

Shipping Tubes

Round Cut-to-Length Shipping Tubes

Close these tubes with a cap on each end.

Sealed-End Round Cut-to-Length Shipping Tubes

These tubes have one sealed end and one end that closes with a cap.

Square Cut-to-Length Shipping Tubes

Because of their square shape, these tubes can be stacked, and the flat surface is easier to label than a round surface.

Round Adjustable-Length Shipping Tubes

Adjust these tubes by twisting the two halves. A hexagonal end prevents rolling.

Square Adjustable-Length Shipping Tubes

These tubes are easier to label and stack than round tubes. To adjust the length, push the ends of the tube together or pull them apart.

Round Shipping Tubes with Press-On End Caps

Close these tubes with a cap on each end.

Round Shipping Tubes with Slip-On End Caps

Slide the 6" long cap onto one end; the other end has a permanent steel cap.

Square Shipping Tubes

Because of their square shape, these tubes won't roll away. They can be stacked, and the flat surface is easier to label than a round surface.

Medium-Wall (IMC) and Thick-Wall (Rigid) Conduit and Fittings

Thick-Wall (Rigid) Steel Conduit

This impact- and crush-resistant conduit is also known as galvanized rigid conduit (GRC).

Medium-Wall (IMC) Steel Conduit

Also known as intermediate metallic conduit (IMC), this is lighter in weight than thick-wall (rigid) steel conduit, yet it has the same strength.

Adapters for Medium-Wall (IMC) and
Thick-Wall (Rigid) Steel Conduit

Attach conduit to a knockout in an outlet box or enclosure.

Bushings for Medium-Wall (IMC)
and Thick-Wall (Rigid) Steel Conduit

Join different sizes of conduit.

Grounding Clamps for Medium-Wall (IMC)
and Thick-Wall (Rigid) Steel Conduit

Ground conduit by running a ground wire through the attached lug.

Connectors for Medium-Wall (IMC)
and Thick-Wall (Rigid) Steel Conduit

Join pieces of conduit.

Raintight Reducing Washers for Medium-Wall
(IMC) and Thick-Wall (Rigid) Steel Conduit

Seal out moisture while reducing the knockout size in an outlet box or enclosure so you can attach a different size of conduit to it.

Grommets for Medium-Wall (IMC)
and Thick-Wall (Rigid) Steel Conduit

Connect to the end of conduit or a fitting to protect wires from abrasion when being pulled.

Reducing Washers for Medium-Wall (IMC)
and Thick-Wall (Rigid) Steel Conduit

Reduce the knockout size in an outlet box or enclosure so you can attach a different size of conduit to it.

Connectors for Rigid PVC Conduit

Join pieces of conduit.

Access Ports for Rigid PVC Conduit

Also known as conduit bodies, these ports provide access to wire and cable inside PVC conduit for pulling, splicing, and maintenance. They are also used to change the direction of a run.

Adapters for Rigid PVC Conduit

Attach conduit to a knockout in an outlet box or enclosure.

Reducing Adapters for Rigid PVC Conduit

Connect different sizes and genders of conduit.

Rigid PVC Conduit

This is also known as PVC Schedule 40 conduit.

Adapters for Rigid Stainless Steel Conduit

Attach conduit to a knockout in an outlet box or enclosure.

Rigid Aluminum Conduit

This nonmagnetic aluminum conduit withstands damp and corrosive environments.

Connectors for Rigid Stainless Steel Conduit

Join pieces of conduit.

Adapters for Rigid Aluminum Conduit

Attach conduit to a knockout in an outlet box or enclosure.

Bushings for Rigid Aluminum Conduit

Connect different sizes of conduit.

Connectors for Rigid Aluminum Conduit

Join pieces of conduit.

Rigid Stainless Steel Conduit

Use in food-processing and chemical plants—this is the most corrosion resistant thick-wall conduit we offer.

Hazardous Location Conduit Connectors

Join pieces of conduit.

Hazardous Location Conduit Bushings

Connect different sizes of conduit.

Hazardous Location Conduit Adapters

Attach conduit to a knockout in an outlet box or enclosure.

Hazardous Location Conduit Access Ports

Also known as conduit bodies, these ports provide access to wire and cable inside thick-wall (rigid) metal conduit for pulling, splicing, and maintenance. They are also used to change the direction of a run.

Access Ports for Metal Conduit

Also known as conduit bodies, these ports provide access to wire and cable inside metal conduit for pulling, splicing, and maintenance. They are also used to change the direction of a run.

Thin-Wall (EMT) Conduit and Fittings

Adapters for Thin-Wall (EMT) Steel Conduit

Attach conduit to a knockout in an outlet box or enclosure.

Connectors for Thin-Wall (EMT) Steel Conduit

Join pieces of conduit.

Grommets for Thin-Wall (EMT) Steel Conduit

Slide these grommets into conduit ends to protect wire and cable from abrasion when being pulled.

Reducers for Thin-Wall (EMT) Steel Conduit

Connect different sizes of conduit.

Thin-Wall (EMT) Steel Conduit

Also known as electrical metallic tubing (EMT), this conduit has thin walls that easily bend with a conduit bender and can be cut with a hacksaw.

Adapters for Thin-Wall (EMT) Stainless Steel Conduit

Attach conduit to a knockout in an outlet box or enclosure.

Thin-Wall (EMT) Stainless Steel Conduit

The most corrosion-resistant thin-wall conduit we offer, use this along walls and ceilings in food-processing and chemical plants.

Choose-a-Color Thin-Wall (EMT) Steel Conduit

Visually identify different runs of wire and cable along walls and ceilings with this conduit that has a painted exterior.

Connectors for Choose-a-Color
Thin-Wall (EMT) Steel Conduit

Join pieces of conduit.

Adapters for Choose-a-Color
Thin-Wall (EMT) Steel Conduit

Attach conduit to a knockout in an outlet box or enclosure.

Connectors for Thin-Wall (EMT) Stainless Steel Conduit

Join pieces of conduit.

Service Entrance Weatherheads

Create a connection point to route overhead service wire and cable from utility poles to electrical meters, bringing power to buildings.

Conduit Adapters

Conduit Reducing Adapters

Transition between conduit sizes and types.

Conduit Adapters

Transition between types of conduit.

Flexible Conduit and Fittings

Fittings for Liquid-Tight Flexible Metal Conduit

These fittings seal out liquids when connecting liquid-tight flexible metal conduit to a knockout in an outlet box or enclosure.

Connectors for Flexible Metal Conduit

Join pieces of conduit.

Adapters for Flexible Metal Conduit and Armored Cable

Attach conduit and armored cable to a knockout in an outlet box or enclosure.

Grommets for Flexible Metal
Conduit and Armored Cable

Also known as antishort bushings, these grommets slide into the ends of conduit and armored cable to protect wire and cable from sharp edges.

Adapters for Flexible Metal Conduit

Attach conduit to a knockout in an outlet box or enclosure.

Connectors for Choose-a-Color Flexible Plastic Conduit

Join pieces of conduit.

Adapters for Liquid-Tight Flexible Plastic Conduit

Attach conduit to a knockout in an outlet box or enclosure.

Connectors for Flexible Plastic Conduit

Join pieces of conduit.

Adapters for Choose-a-Color Flexible Plastic Conduit

Attach conduit to a knockout in an outlet box or enclosure.

Connectors for Liquid-Tight Flexible Plastic Conduit

Join pieces of conduit.

Fittings for Shielded Flexible Plastic Conduit

Made of brass, these adapters provide electromagnetic interference (EMI) protection when connecting shielded flexible plastic conduit to a knockout in an outlet box or enclosure.

Reducers for Flexible Plastic Conduit

Connect different sizes of conduit.

Adapters for Flexible Plastic Conduit

Attach conduit to a knockout in an outlet box or enclosure.

Conduit Fitting Locknuts

Locknuts for Plastic Conduit Fittings

Secure threaded plastic conduit fittings to a knockout in an outlet box or enclosure.

Locknuts for Metal Conduit Fittings

Secure threaded metal conduit fittings to a knockout in an outlet box or enclosure.

Continuous-Flex Conduit and Fittings

Fittings for Continuous-Flex Liquid-Tight Plastic Conduit

These fittings seal out liquid when used with continuous-flex liquid-tight plastic conduit.

Fittings for Continuous-Flex Plastic Conduit

One end twists into a piece of conduit for a quick connection; the other end attaches to a knockout in an outlet box or enclosure.

Heat-Shrink Tubing

Extra-Thick Moisture-Seal Heat-Shrink Tubing

Extra-thick walls provide better protection against abrasion and tears than standard moisture-seal tubing, as well as creating a water-resistant seal.

Extra-Thick High-Shrink-Ratio Tubing

Extra-thick walls provide more protection against abrasion and tears than standard high-shrink-ratio tubing. This tubing shrinks down to 1/6th of its original ID, so it creates a tight seal over irregularly shaped objects.

High-Temperature Moisture-Seal Heat-Shrink Tubing

This PTFE tubing withstands temperatures up to 450° F and has an inner lining that creates a water-resistant seal when heated.

Structural Framing

Galvanized Iron and Steel Slip-On Framing and Fittings

To provide corrosion resistance in wet environments, this framing is galvanized.

Aluminum Slip-On Framing and Fittings

Half the weight of steel, this aluminum framing resists corrosion in wet environments.

Stainless Steel Slip-On Framing and Fittings

Made of 316 stainless steel, this framing has excellent resistance to chemicals and salt water.

Press-Fit Framing and Fittings

No need for fasteners—friction holds this framing together. Use press-fit framing and fittings to assemble carts, enclosures, and partitions.

Plastic Slip-On Framing and Fittings

In addition to being lightweight and strong, this plastic framing is nonconductive with good resistance to chemicals and salt water.

Carbon Fiber Slip-On Framing and Fittings

Stronger than plastic and aluminum, this is the lightest weight framing we offer. It has good resistance to chemicals and salt water.

Flat and L-Shaped Bolt-Together Framing and Fittings

Steel Bolt-Together Framing and Fittings

Rails are drilled with consistently spaced holes for multiple mounting options that do not require machining. Use this steel bolt-together framing to build guards, tables, and racks.

Aluminum Bolt-Together Framing and Fittings

Half the weight of steel, this aluminum framing resists corrosion in wet environments.

Telescoping Weld-Together Rails

Create posts of varying lengths.

Weld-Together Framing and Fittings

Create strong structures by welding this framing together. Add metal panels to close off openings.

Strut Channel Covers

Create a four-sided raceway for cable, or give a more finished look to strut channel structures.

Clamp-On Framing and Fittings

Fittings come in two pieces to wrap around rails, so you can quickly modify existing structures without disassembling. Use clamp-on framing and fittings to form temporary partitions, modular conveyors, and workstations.

Strut Channel Caps and Plugs

Cover rough ends of strut channel.

Flush-Fit Framing and Fittings

Flush connections between rails and fittings give structures a clean finished look. Use this framing for stair rails, work platforms, and workstations.

Heavy Duty Clamp-On Framing and Fittings

Thick construction makes this framing strong and sturdy.

Pipe Insulation

Fiberglass Pipe Insulation

This common insulation material is typically used on hot and cold water lines and in process piping.

Mineral Wool Pipe Insulation

Rigid and flame resistant, these insulation tubes are typically used in process piping and mechanical systems.

Lightweight Melamine Foam Pipe Insulation

Melamine has a lightweight construction that allows quick and easy installation. Use on cold and hot water piping and with refrigeration systems.

Clean Room Melamine Foam Pipe Insulation

These rigid, lightweight melamine foam tubes are wrapped in an ISO Class 5 and Fed. Spec. Class 100 clean room jacket that is suitable for sanitary and washdown applications. They’re typically used on cold and hot water piping and with refrigeration systems.

Chemical-Resistant Cellular Glass Pipe Insulation

Very rigid with a 0% water absorption rate, this insulation is unaffected by corrosive environments, organic solvents, and most acids. It is typically used in chemical-processing systems and underground lines.

Ultra-Insulating Low-Temperature
Polyisocyanurate Foam Pipe Insulation

This very rigid insulation offers the lowest heat-flow rate of our pipe insulation and restricts absorption of water, air, and gas. It is typically used in process piping and chiller plants and performs best in applications below 50° F.

Liquid-Level Indicators

Gaskets for Tubular Gauge Glass

Seal the glass on your level indicator.

Gaskets for Heavy-Duty Level Indicators

Use these gaskets with heavy duty level indicators to seal the glass.

Tubular Gauge Glass

Replace existing gauge glass or combine with valves and guard rods to build your own level indicator.

Gauge Glass for Heavy-Duty Level Indicators

Use this gauge glass with heavy duty level indicators.

Plastic and Rubber Tubing for Flow

High-Pressure Hard Plastic Tubing for Air and Water

Moisture-Resistant Hard PlasticTubing for Air and Water

Hard Plastic Tubing for Food and Beverage

UV-Resistant Hard Plastic Tubing for Chemicals

Crack-Resistant Hard Plastic Tubing for Chemicals

Hard Plastic Tubing for Drinking Water

Metal Tubing for Flow

Rigid Aluminum Tubing

General Purpose Aluminum Tubing

Easy-Bend Aluminum Tubing

Ultra-Corrosion-Resistant Aluminum Tubing

Mil. Spec. Aluminum Tubing

Smooth-Bore Seamless Stainless Steel Tubing

Welded Stainless Steel Tubing

Precision Stainless Steel Tubing

Extreme-Pressure Stainless Steel Tubing

Mil. Spec. Stainless Steel Tubing

Extra-Hard Stainless Steel Tubing

Stainless Steel Tubing for Corrosive Gases

Cleaned and Capped Stainless Steel Tubing

Miniature Stainless Steel Tubing

Miniature Stainless Steel Tubing with 90° Bend

Miniature Stainless Steel Tubing with Polished Exterior

Extreme-Pressure Miniature Stainless Steel Tubing

Miniature Stainless Steel Tubing for Corrosive Gases

High-Polish Stainless Steel Tubingfor Food, Beverage, and Dairy

High-Polish Stainless Steel Tubingfor Pharmaceuticals with Certification

Ultra-High-Polish StainlessSteel Tubing with Certification

Brass Tubing

Welded Steel Tubing

Smooth-Bore Seamless Steel Tubing

Vacuum-Rated Large-Diameter Steel Tubing

Corrosion-Resistant Steel Tubing

Precision Steel Tubing

High-Pressure Smooth-Bore Seamless Titanium Tubing

Welded Titanium Tubing

Super-Corrosion-Resistant Nickel Tubing

Copper Tubing with Coated Interior

Copper Tubing with CoatedExterior for Natural and LP Gas

High-Temperature Nickel Tubing

Acid-Resistant Nickel Tubing

Plastic Pipe and Pipe Fittings

Standard-Wall Plastic Pipe for Water

Thick-Wall Plastic Pipe for Water

UV-Resistant Thick-Wall PVC Pipe for Water

UV-Resistant Standard-Wall PVC Pipe for Water

CPVC Pipe for Hot Water

Underground PVC Pipe for Drain, Waste, and Vent

UV-Resistant Polypropylene Pipe for Chemicals

Flame-Retardant PVDF PipeNipples and Pipe for Chemicals

High-Temperature PTFE PipeNipples and Pipe for Chemicals

Fiberglass Pipe for Corrosive Chemicals

Easy-Access CPVC Pipe for Chemicals

Drain, Waste, and Vent ABS Pipe for Chemicals

Gravity-Flow CPVC Pipe for Corrosive Chemical Waste

Clear Plastic

Clear Impact-Resistant Polycarbonate Tubes

Clear Scratch- and UV-Resistant Cast Acrylic Tubes

Clear Scratch- and UV-Resistant Acrylic Tubes

Clear Easy-to-Form PETG Tubes

Clear Cellulose Tubes

Plastic

Wear-Resistant Easy-to-MachineDelrin® Acetal Resin Tubes

Slippery Wear-Resistant Easy-to-MachineDelrin® Acetal AF Resin Tubes

Wear-Resistant Easy-to-Machine Acetal Tubes

Wear-Resistant Nylon Tubes

MDS-Filled Easy-to-MachineWear-Resistant Cast Nylon Tubes

Easy-to-Machine Wear-Resistant Cast Nylon Tubes

Heat-Stabilized Easy-to-MachineWear-Resistant Cast Nylon Tubes

Oil-Filled Easy-to-MachineWear-Resistant Cast Nylon Tubes

Polypropylene Tubes

Impact-Resistant Easy-to-Form ABS Tubes

Chemical-Resistant PVC Tubes

High-Temperature CPVC Tubes

Slippery UHMW Polyethylene Tubes

Wear- and Chemical-Resistant PEEK Tubes

Durable Glass-Filled Chemical-ResistantSlippery PTFE Tubes

Ultra-Strength Lightweight Carbon Fiber

Ultra-Strength Lightweight Carbon Fiber Round Tubes

Moisture-Resistant Hard Plastic
Tubing for Air and Water

High-Polish Stainless Steel Tubing
for Food, Beverage, and Dairy

High-Polish Stainless Steel Tubing
for Pharmaceuticals with Certification

Ultra-High-Polish Stainless
Steel Tubing with Certification

Copper Tubing with Coated
Exterior for Natural and LP Gas

Flame-Retardant PVDF Pipe
Nipples and Pipe for Chemicals

High-Temperature PTFE Pipe
Nipples and Pipe for Chemicals

Wear-Resistant Easy-to-Machine
Delrin® Acetal Resin Tubes

Slippery Wear-Resistant Easy-to-Machine
Delrin® Acetal AF Resin Tubes

MDS-Filled Easy-to-Machine
Wear-Resistant Cast Nylon Tubes

Heat-Stabilized Easy-to-Machine
Wear-Resistant Cast Nylon Tubes

Oil-Filled Easy-to-Machine
Wear-Resistant Cast Nylon Tubes

Durable Glass-Filled Chemical-Resistant
Slippery PTFE Tubes

Telescoping Ultra-Strength Lightweight
Carbon Fiber Hexagonal Tubes

Rigid Ultra-Strength Lightweight
Carbon Fiber Round Tubes

Multipurpose Flame-Retardant
Garolite G-10/FR4 Tubes

Multipurpose Flame-Retardant
Garolite G-10/FR4 Rectangular Tubes

Flame-Retardant High-Temperature
Garolite G-11/FR5 Tubes

Ultra-High-Temperature
Impact-Resistant Garolite Tubes

High-Temperature Graphite-Filled
841 Bearing Bronze Tubes