When released, the spring-loaded ring handle returns to its recessed position to stay out of the way. These latches open from the inside as well as the outside, and they hold doors shut when pushed closed. From the outside, pull the recessed ring to unlatch. From the inside, slide the release tab on the back of the latch.

For technical drawings and 3-D models, click on a part number.

Quickly push these latches closed to secure doors and pull the ring handle with your finger to open them. Although they don’t require a strike plate, you will need to create a cutout in your enclosure or drawer for the latch bolt.

Install screw-on latches into a through hole and then fasten them in place.

Mount press-fit latches by simply pressing them into a through hole. They require a special through-hole shape. All are faster to install than screw-on latches since there’s no need to fasten them in place.

For technical drawings and 3-D models, click on a part number.

For use on spray booths and drying ovens, these latches automatically open when the internal pressure of the enclosure reaches a set level. They can also be manually opened by pulling on the handle. Mount latches horizontally to the face of the door with the strike plate mounted on the frame. To determine door mounting location, look at the outside face of the door: if the hinges are on the right, order a right-side latch; if the hinges are on the left, order a left-side latch.

Door offset is the space between the door face and the frame when the door is closed. Pressure release force is the amount of pressure an enclosed area can sustain before the latch opens. Adjust the catch to make the latch more or less sensitive to pressure. Styles 1 and 2 adjust with a slotted screwdriver.

For technical drawings and 3-D models, click on a part number.

Great where space is a concern, these locks have a spring-loaded ring handle that returns to its recessed position when you release it. Push them closed to lock your door automatically.

Choose keyed alike locks when you need several locks that open with the same key. Choose keyed differently locks when you need locks that each open with a different key.

316 stainless steel locks have excellent corrosion resistance.

For technical drawings and 3-D models, click on a part number.

Fold the ring handle into the recess to stay out of the way when not in use. It lays flat so you won’t bump into these latches or catch clothes on them. The latches project further into enclosures than other latches without a recess. To open them, pull the ring with your finger. Turn the head a quarter turn to lock, then turn it another quarter turn to create compression. The second turn also reduces rattling from vibration.

Also known as compression cam latches, these latches create a tighter hold than traditional cam latches, making them useful for doors that have a seal. A gasket helps keep low-pressure washdowns and dust from entering through the latch. This helps you maintain your sealed enclosure's IP or NEMA rating. Made of stainless steel, these latches won’t rust in areas that are constantly exposed to moisture.

All of these latches include multiple cams with an adjustable latching distance. They handle a wide range of latching distances, so they’re best for tasks when precise distances are unknown. Adjust the position of the cam before you begin to install them. The latch installation hole can be made with a round hole instead of the irregularly shaped standard cam hole. This is especially helpful if the material of the door is difficult to cut or part of an existing structure.

For technical drawings and 3-D models, click on a part number.

Fold the ring handle into the recess to stay out of the way when not in use. Latch comes with a straight cam and a reversible offset cam to accommodate different latching distances.

For technical drawings and 3-D models, click on a part number.

Grip and turn the ring handle to open and close doors and drawers, then fold it out of the way when you are done. Also known as quarter-turn latches, these latches have an arm that rotates 90° to secure enclosures. They come with a reversible offset cam that has an adjustable latching distance. Best for tasks when precise distances are unknown, they handle a wide range of latching distances. Adjust the position of the cam before you begin to install them.

For technical drawings and 3-D models, click on a part number.

Fold the ring handle into the recess to stay out of the way when not in use. Choose this keyed alike lock if you need several locks that open with the same key. Lock comes with a straight cam and a reversible offset cam to accommodate different latching distances.

For technical drawings and 3-D models, click on a part number.