Material Material |
|---|
|
System of Measurement System of Measurement |
|---|
|
Length Length |
|---|
|
For Material Thickness For Material Thickness |
|---|
|
Thread Size Thread Size | Show |
|---|
|
Thread Size Thread Size | Hide |
|---|
Body Type Body Type |
|---|
 | Sleeve |
Drill Bit Size Drill Bit Size |
|---|
|
Installed Length Installed Length |
|---|
|
For Use In For Use In |
|---|
|
Nut Type Nut Type |
|---|
 | Rivet |
Finish Finish |
|---|
|
Drill Bit Decimal Size Equivalent Drill Bit DecimalSize Equivalent |
|---|
|
Thread Fit Thread Fit |
|---|
|
End Type End Type |
|---|
|
Thread Spacing Thread Spacing |
|---|
|
Thread Type Thread Type |
|---|
|
Head Length Head Length |
|---|
|
Maximum Operating Pressure Maximum Operating Pressure |
|---|
|
About Nuts, Materials, and Finishes
More
Steel Low-Profile Rivet Nuts
These steel low-profile rivet nuts are about twice as strong as aluminum rivet nuts. They have a low profile for light duty fastening in low-clearance applications. A cadmium-plating provides corrosion resistance and adds lubricity so they collapse smoothly. The threaded portion is drawn into the sleeve when installed, creating pressure against the hole to secure the nut. Drill bit size listed in the table is for material with a 0.030"-0.090" thickness. These rivet nuts can be installed in thicker material, but may require larger holes. Install them using a hand- or power-driven rivet nut tool. Length is measured from under the flange. Installed length is the maximum length of the barrel when installed.
For technical drawings and 3-D models, click on a part number.
Body | Flange | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Thread Size | Drill Bit Size | For Material Thick. | Type | Dia. | Lg. | Installed Lg. | Dia. | Thick. | Pkg. Qty. | Pkg. | |
Cadmium-Plated Steel | |||||||||||
| 1/2"-20 | 3/4" | 0.03" to 0.09" | Sleeve | 0.75" | 0.920" | 0.455" | 0.800" | 0.015" | 5 | 000000000 | 000000 |
Wrench-Driven Rivet Nut Tools
Use these tools to install most styles of rivet nuts. A wrench and ratchet are required to hold the tool and tighten the nut.
For technical drawings and 3-D models, click on a part number.
| For Thread Size | For Wrench Size | For Ratchet Size | For Rivet Nut Body Type | For Rivet Nut Material | Each | |
| 1/2"-20 | 7/8" | 7/8" | Smooth, Ribbed, Hex, Bulbed, Sleeve | Aluminum, Steel | 000000000 | 000000 |
Air-Powered Rivet Nut Tools
Smaller and lighter than cordless and hydraulic rivet nut tools, use these to install smooth rivet nuts. To use, thread the nut onto the included mandrel and press the trigger to spin the nut onto the tool. Place the nut into the material and press the trigger to install the nut. Press the trigger one more time to spin the mandrel off.
Air Connection | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| For Thread Size | For Rivet Nut Body Type | For Rivet Nut Material | Head Lg. | Overall Ht. | Operating Pressure, psi | Pipe Size | Thread Type | Weight, lbs. | Includes | Each | |
| 1/2"-20 | Smooth | Aluminum, Steel | 7 1/4" | 6" | 90 to 110 | 1/4 | NPT | 4 | Mandrel, Nosepiece | 000000000 | 000000000 |
| For Thread Size | Each | |
| 1/2"-20 | 000000000 | 00000 |
| For Thread Size | Includes | Each | |
| 1/2"-20 | Mandrel, Nose Cone, Bearing Set, Hex Drive | 000000000 | 0000000 |