Filter by
Thread Size
For Rivet Nut Material
For Material Thickness
Nut Type
Rivet Type
End Type
Installed Length
Thread Spacing
DFARS Specialty Metals
Export Control Classification Number (ECCN)
Mil. Spec. Rivet-Mount Nuts
 |  |  |  |
Base | Barrel | Mounting | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Thread Size | Lg. | Wd. | Thk. | Dia. | Ht. | No. of Holes | Hole Dia. | Hole Ctr.-to-Ctr. | Mil. Spec. | Each | |||
Steel—Unlubricated | |||||||||||||
| 1/4"-28 | 51/64" | 1/2" | 3/32" | 0.313" | 3/16" | 2 | 0.098" | 9/16" | MS21075-4N | 90857A130 | 00000 | ||
Cadmium-Plated Steel—Lubricated | |||||||||||||
| 1/4"-28 | 51/64" | 1/2" | 3/32" | 0.313" | 3/16" | 2 | 0.098" | 9/16" | MS21075L4N | 90857A135 | 0000 | ||
Carbon Steel—Unlubricated | |||||||||||||
| 1/4"-28 | 1 19/64" | 33/64" | 1/32" | 0.313" | 1/4" | 2 | 0.098" | 1" | MS21059-4 | 90857A104 | 0000 | ||
Cadmium-Plated Carbon Steel—Lubricated | |||||||||||||
| 1/4"-28 | 1 19/64" | 33/64" | 1/32" | 0.313" | 1/4" | 2 | 0.098" | 1" | MS21059L4 | 90857A110 | 0000 | ||
A286 Stainless Steel—Lubricated | |||||||||||||
| 1/4"-28 | 51/64" | 1/2" | 3/32" | 0.313" | 3/16" | 2 | 0.098" | 9/16" | MS21076L4N | 90857A145 | 0000 | ||
| 1/4"-28 | 1 19/64" | 33/64" | 1/32" | 0.313" | 1/4" | 2 | 0.098" | 1" | MS21060L4 | 90857A123 | 00000 | ||
Silver-Plated A286 Stainless Steel—Unlubricated | |||||||||||||
| 1/4"-28 | 51/64" | 1/2" | 3/32" | 0.313" | 3/16" | 2 | 0.098" | 9/16" | MS21076-4N | 90857A139 | 00000 | ||
| 1/4"-28 | 1 19/64" | 33/64" | 1/32" | 0.313" | 1/4" | 2 | 0.098" | 1" | MS21060-4 | 90857A117 | 00000 | ||
Hand-Driven Rivet Nut Tools for Low-Profile Nuts
 |
Turn these tools by hand to install low-profile rivet nuts. The required mandrels are sold separately. To use, thread the nut onto a mandrel of the same size, then place it into a hole, push down on the tool's T-handle, and turn clockwise.
For Thread Size | For Rivet Nut Body Shape | For Rivet Nut Material | Overall Lg. | Each | |||
|---|---|---|---|---|---|---|---|
| 4-40 6-32 8-32 10-24 10-32 12-24 1/4"-20 1/4"-28 5/16"-18 5/16"-24 3/8"-16 3/8"-24 M3 × 0. 5 mm M4 × 0.7 mm M5 × 0.8 mm M6 × 1 mm M8 × 1.25 mm M10 × 1.5 mm | Sleeve | 18-8 Stainless Steel Aluminum Steel | 5 7/8" | 98590A100 | 000000 | ||
Twist-Resistant Rivet Nuts
 |
 |
Ideal for parts that require frequent maintenance or disassembly, these rivet nuts won't spin out when you tighten or loosen a screw. Their ribbed body digs into material to prevent twisting.
Install these nuts in a drilled or punched round hole using a rivet nut tool. Thread the rivet nut onto the mandrel, then grip the tool body with a wrench as you twist the tightening nut with a ratchet. Choose an air- or battery-powered tool for fast installation or to easily switch between many different nut sizes. Length is measured from under the flange.
Zinc-Yellow-Chromate-Plated Steel—A step up from plain steel, the plating withstands occasional exposure to moisture.
18-8 Stainless Steel—The choice for wet and outdoor environments, these nuts resist rust and mild chemicals.
Rivet Nuts | Wrench-Driven Tools | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Flange | ||||||||||||||
Thread Size | Drill Bit Size | For Material Thk. | Body Dia. | Lg. | Installed Lg. | Dia. | Thk. | Pkg. Qty. | Pkg. | Each | ||||
Zinc-Yellow-Chromate-Plated Steel | ||||||||||||||
| 1/4"-28 | 25/64" | 0.027" to 0.165" | 0.39" | 0.58" | 0.380" | 0.5" | 0.03" | 25 | 95105A122 | 000000 | 96349A305 | 000000 | ||
| 1/4"-28 | 25/64" | 0.165" to 0.260" | 0.39" | 0.68" | 0.380" | 0.5" | 0.03" | 25 | 95105A132 | 00000 | 96349A305 | 00000 | ||
18-8 Stainless Steel | ||||||||||||||
| 1/4"-28 | 25/64" | 0.027" to 0.165" | 0.39" | 0.58" | 0.380" | 0.5" | 0.03" | 5 | 97467A115 | 00000 | 96349A305 | 00000 | ||
| 1/4"-28 | 25/64" | 0.165" to 0.260" | 0.39" | 0.68" | 0.380" | 0.5" | 0.03" | 5 | 97467A116 | 00000 | 96349A305 | 00000 | ||
Wrench-Driven Rivet Nut Tools
 |
Use these tools to install most styles of rivet nuts. A wrench and ratchet are required to hold the tool and tighten the nut.
For Thread Size | For Wrench Size | For Ratchet Size | For Rivet Nut Body Shape | For Rivet Nut Material | Each | |||
|---|---|---|---|---|---|---|---|---|
| 1/4"-20 1/4"-28 | 7/8" | 11/16" | Smooth Ribbed Hex Bulb Sleeve | 18-8 Stainless Steel Aluminum Steel Titanium | 96349A305 | 000000 | ||
Removal Tools for Locking-Collar Rivets
 |
Cutter Shown with Stop (Sold Separately) |
Remove locking-collar rivets, also called Magna-Grip lockbolts, without damaging your workpiece. Instead of breaking off the collar with a chisel, these tools attach to your drill to mill off the collar. All that's left to do is to drive the pin out with a hammer.
For a complete removal tool, you'll need a cutter and a stop (both sold separately).
Lever-Style Rivet Nut Tools
 |  |
Long Reach Handle, Knob Removal | Long Reach Handle, Plunger Removal |
Use two hands to maximize leverage when installing rivet nuts. These tools require a mandrel and nosepiece. To use, thread the nut onto the mandrel, insert the nut into a drilled hole, and squeeze the handles to secure the nut.
High Leverage—High-leverage tools are about 50% longer than standard tools, giving you extra power for installing rivet nuts. They’re also compatible with rivet studs. Adjust the stroke length to match the size of your rivet nut and workpiece. Unlike tools with a fixed stroke length, you don’t need to manually control the amount of force. You can squeeze the handles all the way shut to install the rivet nut without damaging the rivet or deforming your material. These tools include a mandrel and nosepiece for 1/4"-20 rivet nuts.
Knob Removal—Tools with knob removal have a spin-to-reverse knob to quickly unthread the mandrel from the installed nut.
Plunger Removal—Tools with plunger removal have a quick-acting, pull-to-remove plunger that unthreads the mandrel from the installed nut.
Removal Operation Type | For Rivet Nut Body Shape | For Rivet Nut Material | For Smooth Rivet Nut Thread Size | For Ribbed Rivet Nut Thread Size | For Rivet Stud Thread Size | Stroke Adjustability | Overall Lg. | Wt., lb. | Includes | Each | |||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
High-Leverage Long Reach Handle | |||||||||||||
| Knob | Smooth Ribbed Stud | Aluminum Steel | 8-32 10-24 10-32 1/4"-20 1/4"-28 5/16"-18 1/2"-13 M5 × 0.8 mm M6 × 1 mm M8 × 1.25 mm M10 × 1.5 mm | 10-24 10-32 1/4"-20 5/16"-18 3/8"-16 M5 × 0.8 mm M6 × 1 mm M8 × 1.25 mm M10 × 1.5 mm | 10-24 10-32 1/4"-20 5/16"-18 M5 × 0.8 mm M6 × 1 mm M8 × 1.25 mm | Adjustable | 20 1/2" | 4 | 1/4"-20 Mandrel and nosepiece | 95603A770 | 0000000 | ||
| Plunger | Smooth Ribbed Stud | Aluminum Steel | 8-32 10-24 10-32 1/4"-20 1/4"-28 5/16"-18 3/8"-16 M5 × 0.8 mm M6 × 1 mm M8 × 1.25 mm M10 × 1.5 mm | 10-24 10-32 1/4"-20 5/16"-18 3/8"-16 M5 × 0.8 mm M6 × 1 mm M8 × 1.25 mm M10 × 1.5 mm | 10-24 10-32 1/4"-20 5/16"-18 M5 × 0.8 mm M6 × 1 mm M8 × 1.25 mm | Adjustable | 21" | 4.5 | 1/4"-20 Mandrel and nosepiece | 95603A780 | 000000 | ||
For Thread Size | Each | |||
|---|---|---|---|---|
For Rivet Studs—Nosepiece | ||||
 | ||||
| 10-24 | 95603A105 | 00000 | ||
| 10-32 | 95603A106 | 0000 | ||
| 1/4"-20 | 95603A107 | 0000 | ||
| 5/16"-18 | 95603A108 | 00000 | ||
| M5 × 0.8 mm | 95603A109 | 0000 | ||
| M6 × 1 mm | 95603A111 | 0000 | ||
| M8 × 1.25 mm | 95603A112 | 0000 | ||
For Rivet Nuts—Mandrel and Nosepiece | ||||
 | ||||
| 8-32 | 95603A100 | 00000 | ||
| 10-24 | 95603A880 | 00000 | ||
| 10-32 | 95603A890 | 00000 | ||
| 1/4"-20 | 95603A900 | 00000 | ||
| 1/4"-28 | 95603A102 | 00000 | ||
| 5/16"-18 | 95603A910 | 00000 | ||
| 3/8"-16 | 95603A920 | 00000 | ||
| 1/2"-13 | 95603A101 | 00000 | ||
| M5 × 0.8 mm | 95603A930 | 00000 | ||
| M6 × 1 mm | 95603A940 | 00000 | ||
| M8 × 1.25 mm | 95603A950 | 00000 | ||
| M10 × 1.5 mm | 95603A960 | 00000 | ||
Air-Powered Rivet Nut Tools
 |
Install any size or style of rivet nut with a single tool. When you connect these tools to your compressed air line, the hydraulic fluid inside is pressurized, which generates the force needed to collapse a rivet nut. They’re also known as hydropneumatic rivet nut tools. Rather than rotating the rivet nut, like single-size rivet nut tools, these tools pull it straight back. This means you can adjust the pulling force or stroke depth to match your application. Set the pulling force if you’re installing rivet nuts into workpieces with different thicknesses. Set the stroke depth to install rivet nuts in soft or fragile materials without cracking or warping the surface.
75 to 100 psi—1/4 NPT Air Connection
Body | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Thread Size (For Rivet Nut Body Type) | Dia. | Wd. | Head Lg. | Overall Ht. | Max. Stroke Lg. | Rivet Nut Tool Cycle Time, sec. | Wt., lb. | Includes | Each | |||
Adjustable Pull Force, Adjustable Stroke Depth, Rubber Bottom | ||||||||||||
3,960 lbf Pulling Force | ||||||||||||
| 4-40 to 3/8"-24, M4 × 0.7 mm to M10 × 1.5 mm (Ribbed, Sleeve, Smooth)—For Aluminum, Stainless Steel, Steel 4-40 to 5/16"-24, M4 × 0.7 mm to M8 × 1.25 mm (Hex)—For Aluminum, Stainless Steel, Steel 8-32 to 3/8"-16, M4 × 0.7 mm to M10 × 1.5 mm (Stud)—For Aluminum, Stainless Steel, Steel | 3 3/4" | 1 1/16" | 9 5/8" | 10 3/4" | 0.275" | 1.5 | 3.5 | Nosepiece assemblies for M4 × 0.7 mm, M5 × 0.8 mm, M6 × 1 mm, and M8 × 1.25 mm sizes | 92894A700 | 000000000 | ||
7,190 lbf Pulling Force | ||||||||||||
| 8-32 to 1/2"-13, M4 × 0.7 mm to M12 × 1.75 mm (Hex, Ribbed, Sleeve, Smooth, Stud)—Aluminum, Stainless Steel, Steel 10-24 to 5/16"-18, M5 × 0.8 mm to M8 × 1.25 mm (Hex, Ribbed, Sleeve, Smooth, Stud)—For Titanium | 5 1/8" | 1 1/16" | 10 1/4" | 12 5/8" | 0.39" | 4 to 5 | 7 | Carrying Case, Nosepiece assembly for 1/4"-20 size | 92894A911 | 00000000 | ||
 |
Additional Nosepiece Assemblies for 3,960 lbf. Pulling Force |
For Thread Size | Each | ||
|---|---|---|---|
| 4-40 | 92894A111 | 0000000 | |
| 8-32 | 92894A550 | 000000 | |
| 10-24 | 92894A560 | 000000 | |
| 10-32 | 92894A570 | 000000 | |
| 1/4"-20 | 92894A580 | 000000 | |
| 1/4"-28 | 92894A112 | 000000 | |
| 5/16"-18 | 92894A600 | 000000 | |
| 5/16"-24 | 92894A113 | 000000 | |
| 3/8"-16 | 92894A620 | 000000 | |
| 3/8"-24 | 92894A114 | 000000 | |
| M4 × 0.7 mm | 92894A810 | 000000 | |
| M5 × 0.8 mm | 92894A820 | 000000 | |
| M6 × 1 mm | 92894A830 | 000000 | |
| M8 × 1.25 mm | 92894A840 | 000000 | |
| M10 × 1.5 mm | 92894A850 | 000000 |
|
Additional Nosepiece Assemblies for 7,190 lbf. Pulling Force |
For Thread Size | Each | ||
|---|---|---|---|
| 8-32 | 92894A917 | 000000 | |
| 10-24 | 92894A918 | 00000 | |
| 10-32 | 92894A919 | 00000 | |
| 1/4"-20 | 92894A921 | 00000 | |
| 1/4"-28 | 92894A922 | 00000 | |
| 5/16"-18 | 92894A923 | 00000 | |
| 5/16"-24 | 92894A924 | 00000 | |
| 3/8"-16 | 92894A925 | 00000 | |
| 3/8"-24 | 92894A926 | 00000 | |
| 1/2"-13 | 92894A928 | 00000 | |
| M4 × 0.7 mm | 92894A912 | 00000 | |
| M5 × 0.8 mm | 92894A913 | 00000 | |
| M6 × 1 mm | 92894A914 | 00000 | |
| M8 × 1.25 mm | 92894A915 | 00000 | |
| M10 × 1.5 mm | 92894A916 | 00000 | |
| M12 × 1.75 mm | 92894A927 | 00000 |
 |
Maintenance Kits for 3,960 lbf. Pulling Force |
Includes | Each | ||
|---|---|---|---|
| Hex Key Wrench, Pin-Removal Punch, Spanner Wrench | 92894A711 | 000000 |
Tools for Blind Rivets and Rivet Nuts
 |
Style B |
 |
Install blind rivets and rivet nuts with the same tool. These sets come with the nosepieces and mandrels needed to install the most common sizes of blind rivets and rivet nuts. Additional mandrels and nosepieces are sold separately. Choose the attachment that matches your rivet diameter or nut thread size.
To install a rivet, insert the mandrel into the nosepiece of the tool. Place the rivet in the material and squeeze the handles. The tool pulls the mandrel through the rivet body to tighten it on both sides of the material, then breaks off the excess mandrel. To install a rivet nut, thread the rivet nut onto the mandrel, insert the nut into a drilled hole, and squeeze the handles to secure the nut.
Style B
| |
Nose | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
Dia. | Lg. | Lg. | Ht. | For Rivet Nut Thread Size | For Rivet Nut Body Shape | For Rivet Nut Material | Includes | Each | ||
| 1 1/8" | 1 3/4" | 20" | 6" | 6-32 8-32 10-24 10-32 1/4"-20 1/4"-28 5/16"-18 5/16"-24 3/8"-16 3/8"-24 M4 × 0.7 mm M5 × 0.8 mm M6 × 1 mm M8 × 1.25 mm M10 × 1.5 mm | Bulb, Hex, Ribbed, Sleeve, Smooth | Aluminum, Brass, Stainless Steel, Steel, Titanium | Five mandrel and nosepiece sets (8-32, 10-32, 1/4"-20, 5/16"-18, and 3/8"-16) Four nosepieces (1/8", 5/32", 3/16", and 1/4") | 6879A46 | 0000000 | |
Lever-Style Rivet Nut Tools with Visual Stroke Indicator
 |  |
Knob Removal | Plunger Removal |
Confirm rivet nuts are installed just right—the indicator on these tools ensures you’ve applied the right amount of force. Unlike fixed-stroke tools, you don’t need to manually control the amount of force you apply. Just set your stroke length based on your rivet nut size and workpiece thickness, then squeeze the handles all the way shut to install. The indicator verifies you’ve compressed the nut properly. These tools are 50% longer than standard lever-style tools, giving you extra leverage for installation.
Mandrel and nosepiece sets are required and sold separately. Thread the rivet nut onto the mandrel and insert the nut into a drilled hole, then squeeze the handles to secure the nut.
Knob Removal—Tools with knob removal install rivet-type studs and smooth and ribbed body rivet nuts. They have a spin-to-reverse knob to quickly unthread the mandrel from the installed nut.
Plunger Removal—Tools with plunger removal install smooth and ribbed body rivet nuts. They have a quick-acting, pull-to-remove plunger that unthreads the mandrel from the installed nut.
Removal Operation Type | For Rivet Nut Body Shape | For Smooth Rivet Nut Thread Size | For Ribbed Rivet Nut Thread Size | For Rivet Stud Thread Size | Stroke Adjustability | Overall Lg. | Wt., lb. | Each | |||
|---|---|---|---|---|---|---|---|---|---|---|---|
High-Leverage | |||||||||||
| Knob | Smooth Ribbed Stud | 4-40 6-32 8-32 10-24 10-32 1/4"-20 M3 × 0.5 mm M4 × 0.7 mm M5 × 0.8 mm M6 × 1 mm | 6-32 8-32 10-24 10-32 1/4"-20 1/4"-28 5/16"-18 M4 × 0.7 mm M5 × 0.8 mm M6 × 1 mm M8 × 1.25 mm M10 × 1.5 mm | 8-32 10-32 1/4"-20 5/16"-18 | Adjustable | 22" | 4.5 | 92388A120 | 0000000 | ||
| Plunger | Smooth Ribbed | 4-40 6-32 8-32 10-24 10-32 1/4"-20 5/16"-18 M3 × 0.5 mm M4 × 0.7 mm M5 × 0.8 mm M6 × 1 mm M8 × 1.25 mm M10 × 1.5 mm | 6-32 8-32 10-24 10-32 1/4"-20 1/4"-28 5/16"-18 1/2"-13 M4 × 0.7 mm M5 × 0.8 mm M6 × 1 mm M8 × 1.25 mm M10 × 1.5 mm | — | Adjustable | 20 1/2" | 5 | 92388A125 | 000000 | ||
 |  |
For Smooth and Ribbed Rivet Nuts | For Stud Rivet Nuts |
For Rivet Nut Body Shape | Choose a Thread Size | Each | ||
|---|---|---|---|---|
| Smooth | 4-40, 6-32, 8-32, 10-24, 10-32, 1/4"-20, 5/16"-18, 3/8"-16, M3 × 0.5 mm, M4 × 0.7 mm, M5 × 0.8 mm, M6 × 1 mm, M8 × 1.25 mm, M10 × 1.5 mm | 92388A533 | 000000 | |
| Ribbed | 6-32, 8-32, 10-24, 10-32, 1/4"-20, 1/4"-28, 5/16"-18, 3/8"-16, 1/2"-13, M4 × 0.7 mm, M5 × 0.8 mm, M6 × 1 mm, M8 × 1.25 mm, M10 × 1.5 mm | 92388A122 | 00000 | |
| Stud | 8-32, 10-32, 1/4"-20, 5/16"-18, 3/8"-16 | 92388A755 | 00000 |
Tight-Space Rivet Nuts
 |
 |
Add threads to sheet metal and panels in confined spaces with limited backside clearance. At installation, these compact nuts collapse into themselves and press slightly outward, creating snug-fitting threads half the length of a standard nut but just as strong. With a thin top flange that creates a near-flush fit, they're ideal for light duty fastening in small enclosures or housings.
Install these nuts using a hand- or power-driven rivet nut tool. In thick material, drill or punch a slightly larger hole to ensure the nut body expands uniformly.
Tin Zinc-Plated Steel—Twice as strong as aluminum rivet nuts. The plating resists rust and helps the nut collapse without friction during installation. It's also nontoxic, unlike cadmium plating.
Cadmium-Plated Aluminum—The plating resists rust and helps the nut collapse without friction during installation.
Tin-Plated 18-8 Stainless Steel—The choice for wet and outdoor environments, these nuts resist rust and mild chemicals. The tin plating helps the nut collapse without friction during installation.
Rivet Nuts | Hand-Driven Tools | Mandrels | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Flange | ||||||||||||||||
Thread Size | Drill Bit Size | For Material Thk. | Body Dia. | Lg. | Installed Lg. | Dia. | Thk. | Pkg. Qty. | Pkg. | Each | Each | |||||
Tin Zinc-Plated Steel | ||||||||||||||||
| 1/4"-28 | 3/8" | 0.030" to 0.090" | 0.374" | 0.5" | 0.275" | 0.4" | 0.015" | 10 | 98560A579 | 00000 | 98590A100 | 000000 | 98590A270 | 000000 | ||
Cadmium-Plated Aluminum | ||||||||||||||||
| 1/4"-28 | 3/8" | 0.030" to 0.090" | 0.374" | 0.5" | 0.245" | 0.4" | 0.015" | 5 | 98560A668 | 0000 | 98590A100 | 00000 | 98590A270 | 00000 | ||
Tin-Plated 18-8 Stainless Steel | ||||||||||||||||
| 1/4"-28 | 3/8" | 0.030" to 0.090" | 0.374" | 0.5" | 0.245" | 0.4" | 0.015" | 1 | 98005A330 | 0000 | 98590A100 | 00000 | 98590A270 | 00000 | ||
Highly Corrosion-Resistant 316 Stainless Steel Binding Barrels
 |
 |
Slotted |
Barrel | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
Lg. | Dia. | Head Dia. | Head Ht. | Thread Dp. | Drive Style | Pkg. Qty. | Pkg. | |||
316 Stainless Steel | ||||||||||
1/4"-28 | ||||||||||
| 3/8" | 5/16" | 9/16" | 5/32" | 13/64" | Slotted | 1 | 92463A747 | 00000 | ||
| 1/2" | 5/16" | 9/16" | 5/32" | 3/8" | Slotted | 1 | 92463A748 | 0000 | ||
| 5/8" | 5/16" | 9/16" | 5/32" | 1/2" | Slotted | 1 | 92463A749 | 0000 | ||
| 1 1/4" | 5/16" | 9/16" | 5/32" | 3/8" | Slotted | 1 | 92463A754 | 00000 | ||
| 2" | 5/16" | 9/16" | 5/32" | 3/8" | Slotted | 1 | 92463A756 | 00000 | ||
Single-Size Air-Powered Rivet Nut Tools
 |
Pistol Grip |
Use compressed air to install rivet nuts with less effort than manual tools. Tailored to specific thread sizes, these tools rotate a rivet nut with the exact force needed to collapse it onto your workpiece. They’re smaller and lighter than other powered rivet nut tools, so you can squeeze them into tighter spaces. However, they generate less force, so they’re not recommended for installing nuts into thick materials.
Air Connection | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Thread Size | For Rivet Nut Body Shape | For Rivet Nut Material | Head Lg. | Overall Ht. | Operating Pressure, psi | Pipe Size | Thread Type | Wt., lb. | Includes | Each | |||
Pistol Grip | |||||||||||||
| 1/4"-28 | Smooth Ribbed Bulb Sleeve | Aluminum Steel | 6" | 6" | 70 to 80 | 1/4 | NPT | 3 | Mandrel, Nosepiece | 94675A013 | 0000000 | ||
Rivet Shavers
Shaver Tools
 |
Grind down the heads of installed rivets for a smooth, even surface. These shavers can be set in 0.001" increments for precise control over how much material you remove. They come with a stabilizer and a skirt for ½" rivet heads (additional sizes sold separately). The stabilizer has two arms that press against the surface of your material to steady the tool and keep you from grinding at an angle.
Air Inlet | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
For Rivet Head Dia. | For Thread Size | Lg. Adjustment Increments | Operating Pressure, psi | Speed Control | Pipe Size | Thread Type | Gender | Includes | Each | ||
| 5/16" to 5/8" | 1/4"-28 | 0.001" | 90 | Trigger | 1/4 | NPT | Female | 1/2" Skirt Stabilizer | 9100N11 | 0000000 | |
