Filter by
System of Measurement
Thread Size
Threading
For Material Thickness
Fastener Head Type
Hole Size
Thread Spacing
Finish
Drive Style
Locking Type
Thread Type
Shear Strength
DFARS Specialty Metals
Export Control Classification Number (ECCN)
REACH
RoHS
Washer Width
About Hex Head Screws and Bolts
More
Tight-Spot Hex Head Screws
Installed View
A high-strength alternative to blind rivets, use these screws when only one side of the material is accessible. To install, hold the washer in place with a wrench, and then use a hex socket to turn the screw. When the screw is tightened, the attached nut expands the sleeve to create a strong clamping force on the back of the material. Dimensions meet ISO 4017 (formerly DIN 933) specifications. Length is measured from under the head.
Head, mm | Washer | Sleeve | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Material Thick. | For Hole Size | Drill Bit Size | Lg. | Threading | Thread Spacing  | Wd. | Ht. | O-Ring Material | OD | Wd. | Thick. | OD | Lg. | Tensile Strength, psi | Shear Strength | Specifications Met | Each | |
Zinc-Plated Class 8.8 Steel | ||||||||||||||||||
M16 × 2 mm | ||||||||||||||||||
| 1/2"-1 1/8" | 1 1/16" | 1 1/16" | 2 5/8" | Fully Threaded | Coarse | 24 | 10 | Rubber | 1.5" | 1 7/16" | 5/16" | 1 1/64" | 1 5/8" | 110,000 | 69,600 lbs./sq. in. | ISO 4017, DIN 933 | 000000000 | 000000 |
| 1 1/8"-2" | 1 1/16" | 1 1/16" | 3 5/8" | Fully Threaded | Coarse | 24 | 10 | Rubber | 1.5" | 1 7/16" | 5/16" | 1 1/64" | 2 1/2" | 110,000 | 69,600 lbs./sq. in. | ISO 4017, DIN 933 | 000000000 | 00000 |
| 2"-2 13/16" | 1 1/16" | 1 1/16" | 4 7/16" | Fully Threaded | Coarse | 24 | 10 | Rubber | 1.5" | 1 7/16" | 5/16" | 1 1/64" | 3 5/16" | 110,000 | 69,600 lbs./sq. in. | ISO 4017, DIN 933 | 000000000 | 00000 |