For Rod Diameter For Rod Diameter |
---|
Seal OD Seal OD |
---|

Seal ID Seal ID |
---|

|
Seal Width Seal Width |
---|

For Cylinder Type For Cylinder Type |
---|
|
For Use With For Use With |
---|
|
For Groove Diameter For Groove Diameter |
---|

|
For Groove Width For Groove Width |
---|

|
|
Overall Seal Width Overall Seal Width |
---|

For Groove Shoulder Diameter For Groove Shoulder Diameter |
---|

|
Maximum Speed Maximum Speed |
---|
|
|
Hardness Hardness |
---|
|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
---|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
---|
|
Specifications Met Specifications Met |
---|
About Cylinder Seals

Rod wipers scrape dirt, dust, and moisture from the rod, preventing contamination inside your cylinder.
Rod seals maintain the pressure inside cylinders and prevent fluid from leaking out.
Wear rings guide the rod and piston to prevent uneven wear and optimize seal performance.
Head seals are a more reliable alternative to the standard O-ring/backup ring combination—they resist twisting and remain stable even in applications with fluctuating pressure.
Buffering seals protect hydraulic cylinders from pressure spikes and shock in high-pressure hydraulic applications.
Cushioning seals minimize wear and noise in air-powered cylinders by preventing the piston from slamming against the cylinder body.
Piston seals make a seal between their outside edge and the cylinder bore to prevent internal leaks.
Rod Wipers


Also known as U-type wipers, these have a single lip that scrapes dirt, dust, and moisture from the rod, preventing contamination inside the cylinder.
Wipers that meet MS28776 fit dash size grooves specified by the standard.
Note: Maximum performance values cannot be achieved simultaneously; for example, speed is affected by pressure, temperature, and other operating conditions.
For technical drawings and 3-D models, click on a part number.


For Groove | Seal | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
For Rod Dia. | Dia. | Shoulder Dia. | Wd. | Wd. | O'all Wd. | Max. Speed, ft./sec. | Max. Pressure, psi | Temp. Range, °F | Hardness | Color | Each | |
Polyurethane Rubber | ||||||||||||
3/8" | 0.622" | 0.535" | 0.124" | 0.125" | 0.210" | 1.6 | 5 | -65° to 200° | Durometer 90A (Extra Hard) | Black | 0000000 | 00000 |
1/2" | 0.747" | 0.660" | 0.124" | 0.125" | 0.210" | 1.6 | 5 | -65° to 200° | Durometer 90A (Extra Hard) | Black | 0000000 | 0000 |
5/8" | 0.872" | 0.785" | 0.124" | 0.125" | 0.210" | 1.6 | 5 | -65° to 200° | Durometer 90A (Extra Hard) | Black | 0000000 | 0000 |
3/4" | 1.122" | 0.995" | 0.187" | 0.188" | 0.305" | 1.6 | 5 | -65° to 200° | Durometer 90A (Extra Hard) | Black | 0000000 | 0000 |
7/8" | 1.247" | 1.120" | 0.187" | 0.188" | 0.305" | 1.6 | 5 | -65° to 200° | Durometer 90A (Extra Hard) | Black | 0000000 | 0000 |
1" | 1.372" | 1.245" | 0.187" | 0.188" | 0.305" | 1.6 | 5 | -65° to 200° | Durometer 90A (Extra Hard) | Black | 0000000 | 0000 |
1 1/8" | 1.497" | 1.370" | 0.187" | 0.188" | 0.305" | 1.6 | 5 | -65° to 200° | Durometer 90A (Extra Hard) | Black | 0000000 | 0000 |
1 1/4" | 1.622" | 1.495" | 0.187" | 0.188" | 0.305" | 1.6 | 5 | -65° to 200° | Durometer 90A (Extra Hard) | Black | 0000000 | 0000 |
1 3/8" | 1.747" | 1.620" | 0.187" | 0.188" | 0.305" | 1.6 | 5 | -65° to 200° | Durometer 90A (Extra Hard) | Black | 0000000 | 0000 |
1 1/2" | 1.872" | 1.745" | 0.187" | 0.188" | 0.305" | 1.6 | 5 | -65° to 200° | Durometer 90A (Extra Hard) | Black | 0000000 | 0000 |
1 3/4" | 2.122" | 1.995" | 0.187" | 0.188" | 0.305" | 1.6 | 5 | -65° to 200° | Durometer 90A (Extra Hard) | Black | 0000000 | 0000 |
2" | 2.497" | 2.327" | 0.249" | 0.250" | 0.395" | 1.6 | 5 | -65° to 200° | Durometer 90A (Extra Hard) | Black | 0000000 | 0000 |
2 1/4" | 2.747" | 2.577" | 0.249" | 0.250" | 0.395" | 1.6 | 5 | -65° to 200° | Durometer 90A (Extra Hard) | Black | 0000000 | 0000 |
2 1/2" | 2.997" | 2.827" | 0.249" | 0.250" | 0.395" | 1.6 | 5 | -65° to 200° | Durometer 90A (Extra Hard) | Black | 0000000 | 0000 |
2 3/4" | 3.247" | 3.077" | 0.249" | 0.250" | 0.395" | 1.6 | 5 | -65° to 200° | Durometer 90A (Extra Hard) | Black | 0000000 | 0000 |
3" | 3.497" | 3.327" | 0.249" | 0.250" | 0.395" | 1.6 | 5 | -65° to 200° | Durometer 90A (Extra Hard) | Black | 0000000 | 0000 |
3 1/2" | 3.997" | 3.827" | 0.249" | 0.250" | 0.395" | 1.6 | 5 | -65° to 200° | Durometer 90A (Extra Hard) | Black | 0000000 | 0000 |
4" | 4.497" | 4.327" | 0.249" | 0.250" | 0.395" | 1.6 | 5 | -65° to 200° | Durometer 90A (Extra Hard) | Black | 0000000 | 0000 |
4 1/2" | 5.247" | 4.993" | 0.374" | 0.375" | 0.585" | 1.6 | 5 | -65° to 200° | Durometer 90A (Extra Hard) | Black | 0000000 | 00000 |
5" | 5.747" | 5.493" | 0.374" | 0.375" | 0.585" | 1.6 | 5 | -65° to 200° | Durometer 90A (Extra Hard) | Black | 0000000 | 00000 |
6" | 6.747" | 6.493" | 0.374" | 0.375" | 0.585" | 1.6 | 5 | -65° to 200° | Durometer 90A (Extra Hard) | Black | 0000000 | 00000 |


For Groove | Seal | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Rod Dia. | Mil. Spec. Dash Number | Dia. | Shoulder Dia. | Wd. | Wd. | O'all Wd. | Max. Speed, ft./sec. | Temp. Range, °F | Hardness | Color | Specifications Met | Each | |
Fluoroelastomer Rubber | |||||||||||||
1/2" | 1 | 0.760" | 0.647" | 0.107" | 0.099" | 0.187" | 3.3 | -5° to 400° | Durometer 90A (Extra Hard) | Black | MS28776 | 0000000 | 000000 |
5/8" | 3 | 0.885" | 0.772" | 0.107" | 0.099" | 0.187" | 3.3 | -5° to 400° | Durometer 90A (Extra Hard) | Black | MS28776 | 0000000 | 00000 |
3/4" | 5 | 1.010" | 0.897" | 0.107" | 0.099" | 0.187" | 3.3 | -5° to 400° | Durometer 90A (Extra Hard) | Black | MS28776 | 0000000 | 00000 |
7/8" | 7 | 1.147" | 1.023" | 0.107" | 0.099" | 0.187" | 3.3 | -5° to 400° | Durometer 90A (Extra Hard) | Black | MS28776 | 0000000 | 00000 |
1" | 9 | 1.272" | 1.148" | 0.107" | 0.099" | 0.187" | 3.3 | -5° to 400° | Durometer 90A (Extra Hard) | Black | MS28776 | 0000000 | 00000 |
1 1/8" | 11 | 1.397" | 1.273" | 0.107" | 0.099" | 0.187" | 3.3 | -5° to 400° | Durometer 90A (Extra Hard) | Black | MS28776 | 0000000 | 00000 |
1 1/4" | 13 | 1.522" | 1.398" | 0.107" | 0.099" | 0.187" | 3.3 | -5° to 400° | Durometer 90A (Extra Hard) | Black | MS28776 | 0000000 | 00000 |
Rod-Sealing Wipers


A two-lip design means that these wipers also function as a rod seal.
Wipers that meet ISO 6195 Type C fit grooves with the dimensions and tolerances specified by the standard.
Note: Maximum performance values cannot be achieved simultaneously; for example, speed is affected by pressure, temperature, and other operating conditions.
For technical drawings and 3-D models, click on a part number.


For Groove | Seal | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
For Rod Dia. | Dia. | Shoulder Dia. | Wd. | Wd. | O'all Wd. | Max. Speed, ft./sec. | Temp. Range, °F | Hardness | Color | Each | |
Buna-N Rubber | |||||||||||
1/4" | 0.552" | 0.370" | 0.203" | 0.203" | 0.245" | 3.3 | -40° to 250° | Durometer 90A (Extra Hard) | Black | 0000000 | 00000 |
3/8" | 0.677" | 0.495" | 0.203" | 0.187" | 0.245" | 3.3 | -40° to 250° | Durometer 90A (Extra Hard) | Black | 0000000 | 0000 |
1/2" | 0.802" | 0.620" | 0.203" | 0.203" | 0.245" | 3.3 | -40° to 250° | Durometer 90A (Extra Hard) | Black | 0000000 | 0000 |
5/8" | 0.927" | 0.745" | 0.203" | 0.203" | 0.245" | 3.3 | -40° to 250° | Durometer 90A (Extra Hard) | Black | 0000000 | 0000 |
3/4" | 1.052" | 0.870" | 0.203" | 0.203" | 0.245" | 3.3 | -40° to 250° | Durometer 90A (Extra Hard) | Black | 0000000 | 0000 |
1" | 1.365" | 1.135" | 0.218" | 0.203" | 0.275" | 3.3 | -40° to 250° | Durometer 90A (Extra Hard) | Black | 0000000 | 0000 |
1 1/8" | 1.490" | 1.260" | 0.218" | 0.218" | 0.275" | 3.3 | -40° to 250° | Durometer 90A (Extra Hard) | Black | 0000000 | 0000 |
1 1/4" | 1.615" | 1.385" | 0.218" | 0.203" | 0.245" | 3.3 | -40° to 250° | Durometer 90A (Extra Hard) | Black | 0000000 | 0000 |
1 3/8" | 1.740" | 1.510" | 0.218" | 0.218" | 0.275" | 3.3 | -40° to 250° | Durometer 90A (Extra Hard) | Black | 0000000 | 0000 |
1 1/2" | 1.865" | 1.635" | 0.218" | 0.218" | 0.275" | 3.3 | -40° to 250° | Durometer 90A (Extra Hard) | Black | 0000000 | 0000 |
1 5/8" | 1.990" | 1.760" | 0.218" | 0.218" | 0.275" | 3.3 | -40° to 250° | Durometer 90A (Extra Hard) | Black | 0000000 | 0000 |
1 3/4" | 2.115" | 1.885" | 0.218" | 0.218" | 0.275" | 3.3 | -40° to 250° | Durometer 90A (Extra Hard) | Black | 0000000 | 0000 |
1 7/8" | 2.240" | 2.010" | 0.218" | 0.218" | 0.275" | 3.3 | -40° to 250° | Durometer 90A (Extra Hard) | Black | 0000000 | 0000 |
2" | 2.365" | 2.135" | 0.218" | 0.218" | 0.275" | 3.3 | -40° to 250° | Durometer 90A (Extra Hard) | Black | 0000000 | 0000 |
2 1/4" | 2.745" | 2.385" | 0.281" | 0.281" | 0.351" | 3.3 | -40° to 250° | Durometer 90A (Extra Hard) | Black | 0000000 | 0000 |
2 1/2" | 2.995" | 2.635" | 0.281" | 0.281" | 0.351" | 3.3 | -40° to 250° | Durometer 90A (Extra Hard) | Black | 0000000 | 00000 |
3" | 3.495" | 3.135" | 0.281" | 0.281" | 0.351" | 3.3 | -40° to 250° | Durometer 90A (Extra Hard) | Black | 0000000 | 00000 |
3 1/2" | 3.995" | 3.635" | 0.281" | 0.281" | 0.351" | 3.3 | -40° to 250° | Durometer 90A (Extra Hard) | Black | 0000000 | 00000 |
4" | 4.495" | 4.135" | 0.281" | 0.281" | 0.351" | 3.3 | -40° to 250° | Durometer 90A (Extra Hard) | Black | 0000000 | 0000 |


For Groove | Seal | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
For Rod Dia. | Dia. | Shoulder Dia. | Wd. | Wd. | O'all Wd. | Max. Speed, ft./sec. | Max. Pressure, psi | Temp. Range, °F | Hardness | Color | Each | |
Polyurethane Rubber | ||||||||||||
1/2" | 0.802" | 0.62" | 0.203" | 0.203" | 0.283" | 3 | 290 | -30° to 212° | Durometer 95A (Extra Hard) | Blue | 0000000 | 00000 |
5/8" | 0.927" | 0.745" | 0.203" | 0.203" | 0.283" | 3 | 290 | -30° to 212° | Durometer 95A (Extra Hard) | Blue | 0000000 | 0000 |
3/4" | 1.052" | 0.87" | 0.203" | 0.203" | 0.283" | 3 | 290 | -30° to 212° | Durometer 95A (Extra Hard) | Blue | 0000000 | 0000 |
7/8" | 1.24" | 1.01" | 0.218" | 0.218" | 0.298" | 3 | 290 | -30° to 212° | Durometer 95A (Extra Hard) | Blue | 0000000 | 0000 |
1" | 1.365" | 1.135" | 0.218" | 0.218" | 0.298" | 3 | 290 | -30° to 212° | Durometer 95A (Extra Hard) | Blue | 0000000 | 0000 |
1 3/8" | 1.74" | 1.51" | 0.218" | 0.218" | 0.298" | 3 | 290 | -30° to 212° | Durometer 95A (Extra Hard) | Blue | 0000000 | 0000 |
1 1/2" | 1.865" | 1.635" | 0.218" | 0.218" | 0.298" | 3 | 290 | -30° to 212° | Durometer 95A (Extra Hard) | Blue | 0000000 | 0000 |
2" | 2.365" | 2.135" | 0.218" | 0.218" | 0.298" | 3 | 290 | -30° to 212° | Durometer 95A (Extra Hard) | Blue | 0000000 | 0000 |
16mm | 22mm | 18.5mm | 4mm | 4mm | 6mm | 3 | 290 | -30° to 212° | Durometer 95A (Extra Hard) | Blue | 0000000 | 00000 |
18mm | 24mm | 20.5mm | 4mm | 4mm | 6mm | 3 | 290 | -30° to 212° | Durometer 95A (Extra Hard) | Blue | 0000000 | 0000 |
25mm | 31mm | 27.5mm | 4mm | 4mm | 6mm | 3 | 290 | -30° to 212° | Durometer 95A (Extra Hard) | Blue | 0000000 | 0000 |
28mm | 36mm | 31mm | 5mm | 5mm | 7mm | 3 | 290 | -30° to 212° | Durometer 95A (Extra Hard) | Blue | 0000000 | 0000 |
35mm | 43mm | 38mm | 5mm | 5mm | 7mm | 3 | 290 | -30° to 212° | Durometer 95A (Extra Hard) | Blue | 0000000 | 00000 |
40mm | 48mm | 43mm | 5mm | 5mm | 7mm | 3 | 290 | -30° to 212° | Durometer 95A (Extra Hard) | Blue | 0000000 | 00000 |
45mm | 53mm | 48mm | 5mm | 5mm | 7mm | 3 | 290 | -30° to 212° | Durometer 95A (Extra Hard) | Blue | 0000000 | 00000 |
50mm | 58mm | 53mm | 5mm | 5mm | 7mm | 3 | 290 | -30° to 212° | Durometer 95A (Extra Hard) | Blue | 0000000 | 00000 |
60mm | 70mm | 63mm | 6mm | 6mm | 8mm | 3 | 290 | -30° to 212° | Durometer 95A (Extra Hard) | Blue | 0000000 | 00000 |
65mm | 75mm | 68mm | 6mm | 6mm | 8mm | 3 | 290 | -30° to 212° | Durometer 95A (Extra Hard) | Blue | 0000000 | 00000 |
70mm | 80mm | 73mm | 6mm | 6mm | 8mm | 3 | 290 | -30° to 212° | Durometer 95A (Extra Hard) | Blue | 0000000 | 00000 |
80mm | 90mm | 83mm | 6mm | 6mm | 8mm | 3 | 290 | -30° to 212° | Durometer 95A (Extra Hard) | Blue | 0000000 | 00000 |
90mm | 100mm | 93mm | 6mm | 6mm | 8mm | 3 | 290 | -30° to 212° | Durometer 95A (Extra Hard) | Blue | 0000000 | 00000 |
100mm | 110mm | 103mm | 6mm | 6mm | 8mm | 3 | 290 | -30° to 212° | Durometer 95A (Extra Hard) | Blue | 0000000 | 00000 |
120mm | 135mm | 124mm | 8.5mm | 8.5mm | 10.5mm | 3 | 290 | -30° to 212° | Durometer 95A (Extra Hard) | Blue | 0000000 | 00000 |
Cylinder-Sealing Rod Wipers




These wipers seal against the cylinder to prevent contaminants from entering between the outside edge and the housing. They’re often used in vertically mounted cylinders.
Note: Maximum performance values cannot be achieved simultaneously; for example, speed is affected by pressure, temperature, and other operating conditions.
For technical drawings and 3-D models, click on a part number.
For Groove | Seal | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
For Rod Dia. | Dia. | Shoulder Dia. | Wd. | Wd. | O'all Wd. | Max. Speed, ft./sec. | Temp. Range, °F | Hardness | Color | Each | |
Polyurethane Rubber | |||||||||||
1/4" | 0.497" | 0.410" | 0.124" | 0.210" | 0.215" | 1.6 | -65° to 275° | Durometer 90A (Extra Hard) | Beige | 0000000 | 00000 |
3/8" | 0.622" | 0.535" | 0.124" | 0.210" | 0.215" | 1.6 | -65° to 275° | Durometer 90A (Extra Hard) | Beige | 0000000 | 0000 |
1/2" | 0.747" | 0.660" | 0.124" | 0.210" | 0.215" | 1.6 | -65° to 275° | Durometer 90A (Extra Hard) | Beige | 0000000 | 0000 |
5/8" | 0.872" | 0.785" | 0.124" | 0.210" | 0.215" | 1.6 | -65° to 275° | Durometer 90A (Extra Hard) | Beige | 0000000 | 0000 |
3/4" | 1.122" | 0.995" | 0.187" | 0.305" | 0.315" | 1.6 | -65° to 275° | Durometer 90A (Extra Hard) | Beige | 0000000 | 0000 |
7/8" | 1.247" | 1.120" | 0.187" | 0.305" | 0.315" | 1.6 | -65° to 275° | Durometer 90A (Extra Hard) | Beige | 0000000 | 0000 |
1" | 1.372" | 1.245" | 0.187" | 0.305" | 0.315" | 1.6 | -65° to 275° | Durometer 90A (Extra Hard) | Beige | 0000000 | 0000 |
1 1/8" | 1.497" | 1.370" | 0.187" | 0.305" | 0.315" | 1.6 | -65° to 275° | Durometer 90A (Extra Hard) | Beige | 0000000 | 0000 |
1 1/4" | 1.622" | 1.495" | 0.187" | 0.305" | 0.315" | 1.6 | -65° to 275° | Durometer 90A (Extra Hard) | Beige | 0000000 | 00000 |
1 3/8" | 1.747" | 1.620" | 0.187" | 0.305" | 0.315" | 1.6 | -65° to 275° | Durometer 90A (Extra Hard) | Beige | 0000000 | 00000 |
1 1/2" | 1.872" | 1.745" | 0.187" | 0.305" | 0.315" | 1.6 | -65° to 275° | Durometer 90A (Extra Hard) | Beige | 0000000 | 00000 |
1 5/8" | 1.997" | 1.870" | 0.187" | 0.305" | 0.315" | 1.6 | -65° to 275° | Durometer 90A (Extra Hard) | Beige | 0000000 | 00000 |
1 3/4" | 2.122" | 1.995" | 0.187" | 0.305" | 0.315" | 1.6 | -65° to 275° | Durometer 90A (Extra Hard) | Beige | 0000000 | 00000 |
1 7/8" | 2.247" | 2.120" | 0.187" | 0.305" | 0.315" | 1.6 | -65° to 275° | Durometer 90A (Extra Hard) | Beige | 0000000 | 00000 |
2" | 2.497" | 2.327" | 0.249" | 0.395" | 0.415" | 1.6 | -65° to 275° | Durometer 90A (Extra Hard) | Beige | 0000000 | 00000 |
2 1/4" | 2.747" | 2.577" | 0.249" | 0.395" | 0.415" | 1.6 | -65° to 275° | Durometer 90A (Extra Hard) | Beige | 0000000 | 00000 |
2 1/2" | 2.997" | 2.827" | 0.249" | 0.395" | 0.415" | 1.6 | -65° to 275° | Durometer 90A (Extra Hard) | Beige | 0000000 | 00000 |
2 3/4" | 3.247" | 3.077" | 0.249" | 0.395" | 0.415" | 1.6 | -65° to 275° | Durometer 90A (Extra Hard) | Beige | 0000000 | 00000 |
3" | 3.497" | 3.327" | 0.249" | 0.395" | 0.415" | 1.6 | -65° to 275° | Durometer 90A (Extra Hard) | Beige | 0000000 | 00000 |
High-Speed Rod Wipers




Made from MDS-filled PTFE for a slippery surface, these wipers allow rods to move three times faster than other rod wipers.
For technical drawings and 3-D models, click on a part number.
For Groove | O-Ring | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
For Rod Dia. | Dia. | Shoulder Dia. | Wd. | Max. Speed, ft./sec. | Temp. Range, °F | Hardness | Color | Hardness | Color | Each | |
MDS-Filled PTFE Plastic with Buna-N Rubber O-Ring | |||||||||||
5/8" | 0.893" | 0.685" | 0.201" | 13 | -30° to 230° | Durometer 60D (Extra Hard) | Gray | Durometer 70A (Hard) | Black | 0000000 | 000000 |
1" | 1.268" | 1.060" | 0.201" | 13 | -30° to 230° | Durometer 60D (Extra Hard) | Gray | Durometer 70A (Hard) | Black | 0000000 | 00000 |
1 3/8" | 1.564" | 1.435" | 0.201" | 13 | -30° to 230° | Durometer 60D (Extra Hard) | Gray | Durometer 70A (Hard) | Black | 0000000 | 00000 |
1 3/4" | 2.018" | 1.810" | 0.201" | 13 | -30° to 230° | Durometer 60D (Extra Hard) | Gray | Durometer 70A (Hard) | Black | 0000000 | 00000 |
2" | 2.268" | 2.060" | 0.201" | 13 | -30° to 230° | Durometer 60D (Extra Hard) | Gray | Durometer 70A (Hard) | Black | 0000000 | 00000 |
2 1/4" | 2.518" | 2.310" | 0.201" | 13 | -30° to 230° | Durometer 60D (Extra Hard) | Gray | Durometer 70A (Hard) | Black | 0000000 | 00000 |
2 1/2" | 2.768" | 2.560" | 0.201" | 13 | -30° to 230° | Durometer 60D (Extra Hard) | Gray | Durometer 70A (Hard) | Black | 0000000 | 00000 |
Rod Wipers for Open Grooves




Replace wipers in open-groove cylinders—these wipers have an integral steel case that press fits into the groove around the rod.
Note: Maximum performance values cannot be achieved simultaneously; for example, speed is affected by pressure, temperature, and other operating conditions.
For technical drawings and 3-D models, click on a part number.
For Groove | ||||||||
---|---|---|---|---|---|---|---|---|
For Rod Dia. | Dia. | Wd. | Max. Speed, ft./sec. | Temp. Range, °F | Hardness | Color | Each | |
Polyurethane Rubber with Steel Case | ||||||||
1/2" | 1.000" | 0.250" | 4.9 | -50° to 250° | Durometer 95A (Extra Hard) | Blue | 0000000 | 00000 |
5/8" | 1.125" | 0.312" | 4.9 | -50° to 250° | Durometer 95A (Extra Hard) | Blue | 0000000 | 0000 |
3/4" | 1.250" | 0.312" | 4.9 | -50° to 250° | Durometer 95A (Extra Hard) | Blue | 0000000 | 0000 |
7/8" | 1.375" | 0.312" | 4.9 | -50° to 250° | Durometer 95A (Extra Hard) | Blue | 0000000 | 0000 |
1" | 1.500" | 0.312" | 4.9 | -50° to 250° | Durometer 95A (Extra Hard) | Blue | 0000000 | 0000 |
1 1/8" | 1.625" | 0.312" | 4.9 | -50° to 250° | Durometer 95A (Extra Hard) | Blue | 0000000 | 0000 |
1 1/4" | 1.750" | 0.312" | 4.9 | -50° to 250° | Durometer 95A (Extra Hard) | Blue | 0000000 | 0000 |
1 3/8" | 1.875" | 0.312" | 4.9 | -50° to 250° | Durometer 95A (Extra Hard) | Blue | 0000000 | 0000 |
1 1/2" | 2.000" | 0.312" | 4.9 | -50° to 250° | Durometer 95A (Extra Hard) | Blue | 0000000 | 0000 |
1 5/8" | 2.125" | 0.312" | 4.9 | -50° to 250° | Durometer 95A (Extra Hard) | Blue | 0000000 | 0000 |
1 3/4" | 2.250" | 0.312" | 4.9 | -50° to 250° | Durometer 95A (Extra Hard) | Blue | 0000000 | 0000 |
2" | 2.500" | 0.312" | 4.9 | -50° to 250° | Durometer 95A (Extra Hard) | Blue | 0000000 | 0000 |
2 1/4" | 2.750" | 0.312" | 4.9 | -50° to 250° | Durometer 95A (Extra Hard) | Blue | 0000000 | 00000 |
2 3/8" | 2.875" | 0.312" | 4.9 | -50° to 250° | Durometer 95A (Extra Hard) | Blue | 0000000 | 00000 |
2 1/2" | 3.000" | 0.312" | 4.9 | -50° to 250° | Durometer 95A (Extra Hard) | Blue | 0000000 | 00000 |
2 3/4" | 3.250" | 0.312" | 4.9 | -50° to 250° | Durometer 95A (Extra Hard) | Blue | 0000000 | 00000 |
3" | 3.500" | 0.312" | 4.9 | -50° to 250° | Durometer 95A (Extra Hard) | Blue | 0000000 | 00000 |
Rod Seal Kits

Replace all the seals on the rod end of a hydraulic cylinder. Fluoroelastomer rubber and PTFE plastic rod seals can handle higher temperatures than polyurethane or Buna-N rubber rod seals.
For Rod Dia. | Temp. Range, °F | Each | |
For Parker 2H, 2L, 3L, H, L, and VH Series | |||
---|---|---|---|
Polyurethane Rubber | |||
1/2" | -10° to 165° | 0000000 | 000000 |
5/8" | -10° to 165° | 0000000 | 00000 |
1" | -10° to 165° | 0000000 | 00000 |
1 3/8" | -10° to 165° | 0000000 | 00000 |
1 3/4" | -10° to 165° | 0000000 | 00000 |
2" | -10° to 165° | 0000000 | 00000 |
2 1/2" | -10° to 165° | 0000000 | 00000 |
3" | -10° to 165° | 0000000 | 000000 |
3 1/2" | -10° to 165° | 0000000 | 000000 |
4" | -10° to 165° | 0000000 | 000000 |
4 1/2" | -10° to 165° | 0000000 | 000000 |
5" | -10° to 165° | 0000000 | 000000 |
5 1/2" | -10° to 165° | 0000000 | 000000 |
For Hydro-Line N5 and R5 Series | |||
Buna-N Rubber | |||
1/2" | -30° to 175° | 0000000 | 00000 |
5/8" | -30° to 175° | 0000000 | 00000 |
1" | -30° to 175° | 0000000 | 00000 |
1 3/8" | -30° to 175° | 0000000 | 00000 |
1 3/4" | -30° to 175° | 0000000 | 00000 |
2" | -30° to 175° | 0000000 | 00000 |
2 1/2" | -30° to 175° | 0000000 | 00000 |
3" | -30° to 175° | 0000000 | 00000 |
3 1/2" | -30° to 175° | 0000000 | 00000 |
4" | -30° to 175° | 0000000 | 00000 |
4 1/2" | -30° to 175° | 0000000 | 00000 |
5" | -30° to 175° | 0000000 | 00000 |
5 1/2" | -30° to 175° | 0000000 | 000000 |
Fluoroelastomer Rubber | |||
1/2" | 32° to 390° | 0000000 | 00000 |
5/8" | 32° to 390° | 0000000 | 00000 |
1" | 32° to 390° | 0000000 | 00000 |
1 3/8" | 32° to 390° | 0000000 | 000000 |
1 3/4" | 32° to 390° | 0000000 | 000000 |
2" | 32° to 390° | 0000000 | 000000 |
2 1/2" | 32° to 390° | 0000000 | 000000 |
3" | 32° to 390° | 0000000 | 000000 |
3 1/2" | 32° to 390° | 0000000 | 000000 |
4" | 32° to 390° | 0000000 | 000000 |
4 1/2" | 32° to 390° | 0000000 | 000000 |
5" | 32° to 390° | 0000000 | 000000 |
5 1/2" | 32° to 390° | 0000000 | 000000 |
For Rod Dia. | Temp. Range, °F | Each | |
For Vickers NZ Series | |||
---|---|---|---|
PTFE Plastic | |||
5/8" | 32° to 390° | 0000000 | 0000000 |
1" | 32° to 390° | 0000000 | 000000 |
1 3/8" | 32° to 390° | 0000000 | 000000 |
1 3/4" | 32° to 390° | 0000000 | 000000 |
2" | 32° to 390° | 0000000 | 000000 |
2 1/2" | 32° to 390° | 0000000 | 000000 |
3" | 32° to 390° | 0000000 | 000000 |
3 1/2" | 32° to 390° | 0000000 | 000000 |
4" | 32° to 390° | 0000000 | 000000 |
4 1/2" | 32° to 390° | 0000000 | 000000 |
5" | 32° to 390° | 0000000 | 000000 |
5 1/2" | 32° to 390° | 0000000 | 00000000 |
Polyurethane Rubber | |||
5/8" | -30° to 175° | 0000000 | 00000 |
1" | -30° to 175° | 0000000 | 00000 |
1 3/8" | -30° to 175° | 0000000 | 000000 |
1 3/4" | -30° to 175° | 0000000 | 000000 |
2" | -30° to 175° | 0000000 | 000000 |
2 1/2" | -30° to 175° | 0000000 | 000000 |
3" | -30° to 175° | 0000000 | 000000 |
3 1/2" | -30° to 175° | 0000000 | 000000 |
4" | -30° to 175° | 0000000 | 000000 |
4 1/2" | -30° to 175° | 0000000 | 000000 |
5" | -30° to 175° | 0000000 | 000000 |
5 1/2" | -30° to 175° | 0000000 | 000000 |
Rod Glands with Seals


These kits include the rod gland with all of the seals installed. Fluoroelastomer rubber and PTFE plastic rod seals can handle higher temperatures than polyurethane or Buna-N rubber rod seals.
For Rod Dia. | Rod Gland Material | Temp. Range, °F | Each | |
For Miller HV2, and HV3 Series | ||||
---|---|---|---|---|
Polyurethane Rubber Rod Seals | ||||
5/8" | Iron | -10° to 165° | 0000000 | 0000000 |
1" | Iron | -10° to 165° | 0000000 | 000000 |
1 3/8" | Iron | -10° to 165° | 0000000 | 000000 |
1 3/4" | Iron | -10° to 165° | 0000000 | 000000 |
For Parker 2H, 2L, 3L, H, L, and VH Series | ||||
Polyurethane Rubber Rod Seals | ||||
1/2" | Bronze | -10° to 165° | 0000000 | 00000 |
5/8" | Bronze | -10° to 165° | 0000000 | 000000 |
1" | Bronze | -10° to 165° | 0000000 | 000000 |
1 3/8" | Bronze | -10° to 165° | 0000000 | 000000 |
1 3/4" | Bronze | -10° to 165° | 0000000 | 000000 |
2" | Bronze | -10° to 165° | 0000000 | 000000 |
2 1/2" | Bronze | -10° to 165° | 0000000 | 000000 |
3" | Bronze | -10° to 165° | 0000000 | 000000 |
3 1/2" | Bronze | -10° to 165° | 0000000 | 000000 |
4" | Bronze | -10° to 165° | 0000000 | 000000 |
4 1/2" | Bronze | -10° to 165° | 0000000 | 00000000 |
5" | Bronze | -10° to 165° | 0000000 | 00000000 |
5 1/2" | Bronze | -10° to 165° | 0000000 | 00000000 |
For Hydro-Line N5, and R5 Series | ||||
Buna-N Rubber Rod Seals | ||||
5/8" | Iron | -30° to 175° | 0000000 | 00000 |
1" | Iron | -30° to 175° | 0000000 | 000000 |
1 3/8" | Iron | -30° to 175° | 0000000 | 000000 |
1 3/4" | Iron | -30° to 175° | 0000000 | 000000 |
2" | Iron | -30° to 175° | 0000000 | 000000 |
2 1/2" | Iron | -30° to 175° | 0000000 | 000000 |
3" | Iron | -30° to 175° | 0000000 | 000000 |
3 1/2" | Iron | -30° to 175° | 0000000 | 000000 |
4" | Iron | -30° to 175° | 0000000 | 000000 |
4 1/2" | Iron | -30° to 175° | 0000000 | 000000 |
5" | Iron | -30° to 175° | 0000000 | 00000000 |
5 1/2" | Iron | -30° to 175° | 0000000 | 00000000 |
Fluoroelastomer Rubber Rod Seals | ||||
5/8" | Iron | 32° to 390° | 0000000 | 00000 |
1" | Iron | 32° to 390° | 0000000 | 000000 |
1 3/8" | Iron | 32° to 390° | 0000000 | 000000 |
1 3/4" | Iron | 32° to 390° | 0000000 | 000000 |
2" | Iron | 32° to 390° | 0000000 | 000000 |
2 1/2" | Iron | 32° to 390° | 0000000 | 000000 |
3" | Iron | 32° to 390° | 0000000 | 000000 |
3 1/2" | Iron | 32° to 390° | 0000000 | 000000 |
4" | Iron | 32° to 390° | 0000000 | 000000 |
4 1/2" | Iron | 32° to 390° | 0000000 | 00000000 |
5" | Iron | 32° to 390° | 0000000 | 00000000 |
5 1/2" | Iron | 32° to 390° | 0000000 | 00000000 |
For Rod Dia. | Rod Gland Material | Temp. Range, °F | Each | |
For Vickers NZ Series | ||||
---|---|---|---|---|
PTFE Plastic Rod Seals | ||||
5/8" | Iron | 32° to 390° | 0000000 | 0000000 |
1" | Iron | 32° to 390° | 0000000 | 000000 |
1 3/8" | Iron | 32° to 390° | 0000000 | 000000 |
1 3/4" | Iron | 32° to 390° | 0000000 | 000000 |
2" | Iron | 32° to 390° | 0000000 | 000000 |
2 1/2" | Iron | 32° to 390° | 0000000 | 000000 |
3" | Iron | 32° to 390° | 0000000 | 000000 |
3 1/2" | Iron | 32° to 390° | 0000000 | 00000000 |
4" | Iron | 32° to 390° | 0000000 | 00000000 |
4 1/2" | Iron | 32° to 390° | 0000000 | 00000000 |
5" | Iron | 32° to 390° | 0000000 | 00000000 |
5 1/2" | Iron | 32° to 390° | 0000000 | 00000000 |
Polyurethane Rubber Rod Seals | ||||
5/8" | Iron | -30° to 175° | 0000000 | 000000 |
1" | Iron | -30° to 175° | 0000000 | 000000 |
1 3/8" | Iron | -30° to 175° | 0000000 | 000000 |
1 3/4" | Iron | -30° to 175° | 0000000 | 000000 |
2" | Iron | -30° to 175° | 0000000 | 000000 |
2 1/2" | Iron | -30° to 175° | 0000000 | 000000 |
3" | Iron | -30° to 175° | 0000000 | 000000 |
3 1/2" | Iron | -30° to 175° | 0000000 | 000000 |
4" | Iron | -30° to 175° | 0000000 | 000000 |
4 1/2" | Iron | -30° to 175° | 0000000 | 00000000 |
5" | Iron | -30° to 175° | 0000000 | 00000000 |
5 1/2" | Iron | -30° to 175° | 0000000 | 00000000 |
Ball-Screw Way Wipers

Two Wipers, And One
Flanged Retainer

Secure a wiper on the end of a ball nut to sweep chips and other contaminants out of the way as it moves across the ball screw. External-mount wipers mount on the outside end of a ball nut. Internal-mount wipers mount inside the end of a ball nut.
For technical drawings and 3-D models, click on a part number.
For Ball Screw Dia. | For Travel Distance per Turn | Mounting Location | Material | Temp. Range, °F | Includes | Each | |
For Round Ball Nuts | |||||||
---|---|---|---|---|---|---|---|
1/2" | 0.2" | External | Steel | -40° to 300° | One Round Retainer, Two Wipers, One Flanged Retainer | 0000000 | 000000 |
5/8" | 0.2" | External | Steel | -40° to 300° | One Round Retainer, Two Wipers, One Flanged Retainer | 0000000 | 00000 |
3/4" | 0.2" | External | Steel | -40° to 300° | One Round Retainer, Two Wipers, One Flanged Retainer | 0000000 | 00000 |
1" | 0.25" | External | Steel | -40° to 300° | One Round Retainer, Two Wipers, One Flanged Retainer | 0000000 | 00000 |
1 1/2" | 1" | Internal | Steel | -40° to 300° | Two Wipers | 0000000 | 00000 |
Guide-Rail Way Wipers

Compatible with THK guide rails, mount these wipers to carriages to sweep chips and other contaminants out of the way as the carriage moves across the rail.
For technical drawings and 3-D models, click on a part number.
For Carriage Model No. | For Rail Wd., mm | Ht., mm | Wd., mm | Thick., mm | Ctr.-to-Ctr. Mounting Hole Wd., mm | Material | Temp. Range, °F | Mounting Fasteners Included | Each | |
Protects Against Abrasive Grit, Debris, Dust, Grease, Metal Chips, Oil, Synthetic Oil, Wood Chips | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
HSR15R1SS | 15 | 41 | 68 | 5 | 16 | Buna-N Rubber | -80° to 230° | No | 0000000 | 0000000 |
HSR20R1SS | 20 | 41 | 68 | 5 | 22 | Buna-N Rubber | -80° to 230° | No | 0000000 | 000000 |
HSR25R1SS | 23 | 41 | 68 | 5 | 20 | Buna-N Rubber | -80° to 230° | No | 0000000 | 000000 |