System of Measurement System of Measurement |
|---|
|
Roller Diameter Roller Diameter | Show |
|---|
|
Roller Diameter Roller Diameter | Hide |
|---|
Roller Style Roller Style |
|---|
 |  |
| Shaft Mount | Threaded Stud |
Drive Style Drive Style |
|---|
 | Hex |
Track Roller Type Track Roller Type |
|---|
 | Round |
Thread Size Thread Size |
|---|
|
Lubrication Lubrication |
|---|
|
For Load Direction For Load Direction |
|---|
 | Radial |
Static Radial Load Capacity Static Radial Load Capacity |
|---|
|
Maximum Temperature Maximum Temperature |
|---|
|
Maximum Speed Maximum Speed |
|---|
|
Dynamic Radial Load Capacity Dynamic RadialLoad Capacity |
|---|
|
Thread Pitch Thread Pitch |
|---|
|
Lubrication Method Lubrication Method |
|---|
|
Guide Roller Type Guide Roller Type |
|---|
|
About Track Rollers
Also known as cam followers, track rollers have a thick outer roller that runs directly on a flat surface.
More
Threaded Track Rollers
Also known as cam followers, track rollers support loads while guiding and positioning work. Thread the stud directly into a component or secure with a nut for through-hole mounting.
Rollers with seal have end seals to protect rolling elements from dirt and contamination.
For technical drawings and 3-D models, click on a part number.
Roller, mm | Stud, mm | Thread | Shoulder, mm | Radial Load Cap., lbs. | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Wd. | Dia. | Lg. | Size | Lg., mm | Pitch, mm | Dia. | Lg. | Max. Speed, rpm | Static | Dynamic | Max. Temp., ° F | Bearing Type | Includes | Each | |
Steel Flat Rollers without Seal | ||||||||||||||||
| 19 | 11 | 8 | 20 | M8 | 10 | 1.25 | 14 | 0.6 | 5,000 | 2,500 | 1,800 | 245° | Needle Roller | Mounting Hardware | 0000000 | 000000 |
Steel Flat Rollers with Seal | ||||||||||||||||
| 19 | 11 | 8 | 20 | M8 | 10 | 1.25 | 13 | 0.6 | 5,000 | 2,500 | 1,800 | 175° | Needle Roller | Mounting Hardware | 0000000 | 00000 |
Maintenance-Free Threaded Track Rollers
Because they never need to be relubricated, these rollers are a good choice for hard-to-reach places. Also known as cam followers, track rollers support loads while guiding and positioning work. Thread the stud directly into a component or secure with a nut for through-hole mounting. All rollers have end seals to block dirt and contamination.
Crowned rollers have a slight curve, which is invisible to the naked eye, to stay centered on surfaces that are not perfectly aligned and/or not perfectly flat.
For technical drawings and 3-D models, click on a part number.
Roller, mm | Stud, mm | Thread | Radial Load Cap., lbs. | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Wd. | Dia. | Lg. | Size | Pitch, mm | Lg., mm | Shoulder Lg., mm | Max. Speed, rpm | Static | Dynamic | Max. Temp., °F | Bearing Type | Includes | Each | |
Steel Crowned Rollers with Seal | |||||||||||||||
| 19 | 11 | 8 | 20 | M8 | 1.25 | 10 | 0.6 | 1,200 | 1,000 | 950 | 175° | Needle Roller | Mounting Hardware | 000000 | 000000 |
Shaft-Mount Track Rollers
Also known as yoke-style cam followers, these rollers have more mounting flexibility than threaded track rollers. They're typically mounted onto a shaft or clevis rod end. Lubricate rollers through a hole and groove in the inner ring.
Crowned rollers have a slight curve, which is invisible to the naked eye, to stay centered on surfaces that are not perfectly aligned and/or not perfectly flat.
Rollers with seal have end seals to protect rolling elements from dirt and contamination.
For technical drawings and 3-D models, click on a part number.
Roller, mm | Radial Load Cap., lbs. | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Wd. | For Shaft Dia., mm | Overall Wd., mm | Max. Speed, rpm | Static | Dynamic | Max. Temp., °F | Bearing Type | Each | |
Steel Crowned Rollers with Seal | ||||||||||
| 19 | 11 | 6 | 12 | 11,000 | 900 | 750 | 210° | Needle Roller | 0000000 | 000000 |
Light Duty Side-Mount Track
Roller Carriages and Guide Rails
Use these carriages and guide rails for light loads where precise movement is not required.
For technical drawings and 3-D models, click on a part number.