Make a removable loop without specialty tools–secure the two halves of these clamps with a screwdriver and the included screws.

Also known as quick links, screw the nut onto the threaded end to attach end fittings.

Use for three-sided connections. Flat sides ensure webbing and strapping lay flat, so they won't slide and bunch.

Strike the prongs with a ball peen hammer and they expand to hold the connecting link together.

Drive the end through the eye and weld or flatten the extended end to resist opening. These links are also known as cold shuts.

The flat side allows you to connect webbing and strapping, so they lay flat and resist bunching.

Also known as master and sling links, a large inner diameter provides room to attach multiple connectors or legs on a sling.

For security, these connectors must be cut off to be removed.

The pear-shaped link provides more room for attachments than standard figure-eight connectors.

For easy positioning before a load is applied, these rotate to minimize twisting and knotting of rope and chain.

Adjust the position of a fitting or an object under load and minimize twisting and knotting.

Use these to adjust the position of a fitting or an object under load and minimize twisting and knotting.

The snap and split ring swing freely and pull from the center for easy alignment.

Minimize twisting and knotting of rope and chain and adjust the position of a fitting or an object under load.

Screw the pin into position by hand for quick installation and removal. They're for use in low-vibration applications where the shackle remains stationary.

The pins have flush ends to prevent snagging and accidental disengagement.

A bolt fastened with a nut and cotter pin makes these shackles more secure than screw-pin shackles.

One end has a bolt fastened with a nut and cotter pin for a more secure connection than flush-pin connectors.

For use in low-vibration applications where the shackle remains stationary.

Indentations in the shackle body hold the head of the pin in place once fastened.

A lip on the shackle keeps the screw from falling out when loosened.

A lip on the shackle keeps the pin from falling out when loosened.

Attach a rope to the ring on the pin for remote release where access in limited. These shackles have an eye end for connecting to a hook.

Disconnect by pulling the lever or attach rope to the eye on the lever for remote release.

Use these S-hooks for lifting applications.

For extra security, these have a latch that snaps back into place to secure your load.

These hooks have closed ends on both sides.

These snaps have an eye that rotates for easy positioning.

Squeeze the trigger to quickly release the latch.

For a more secure connection than standard trigger-locking snaps, squeeze the trigger and slide the latch grip down to release.

Lock by screwing the latch into the body.

A lock slides upward over the latch to lock. The latch opens outward to accept large diameters of rope.

Rotating for easy positioning before a load is applied, these have a latch to ensure that rope, chain, and fittings won't separate from the hook when the load slackens.

A latch ensures rope, chain, and fittings won't separate from the hook when the load slackens. The hook opening accommodates large anchor points and allows chain to move freely through the closed hook.

These rotate for easy positioning before a load is applied. They have a latch to ensure rope, chain, and fittings won't separate from the hook when the load slackens.

These hooks swivel under load. They have a latch locks closed when a load is applied for a more secure connection than standard hooks.

A ball-bearing swivel allows these to rotate under load. Attach to chain by inserting the included pin through a link.

For a more secure connection than standard hooks, these clevis hooks have a latch that locks closed when a load is applied.

Slide the clevis pin into these hooks to attach chain, no extra fittings needed.

Use these on thick molds, castings, and objects that don't have attachment points. Also known as foundry hooks.

For a more secure connection than standard hooks, the latch locks closed when a load is applied.

Easily slip chain, rope, and fittings on and off these open-mouth hooks. Attach your chain to the clevis end.

Weld these hooks into place.

Easily slip chain, rope, and fittings on and off these open-mouth hooks. Attach your chain to the eye end.

Choose these hoist rings when you need to lift your load from the side.

The fixed base provides added stability and allows you to lift heavy loads with smaller thread sizes.

These compression sleeves are designed to meet lifting specifications.