Decimal Size Equivalent Decimal Size Equivalent |
|---|
Finish Finish |
|---|
|
Component Component |
|---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
|---|
About Drill Bits
More
About Masonry Drill Bits
More
Drill Bit Decimal Size Equivalents
More
Changeable-Size SDS-Max-Shank Masonry
Core Drill Bits for Rotary Hammers
These bits allow you to switch to another size by changing only the bit body. They are hollow and cut with their outside edge for drilling large holes. The SDS-Max shank has three deep slots and two shallow slots for use with SDS-Max-drive rotary hammers. They cannot be used with SDS-Plus-drive rotary hammers.
Drill holes using simultaneous rotary and hammering action to break masonry material into tiny granules. This type of bit drills faster and penetrates material with less pressure than rotary-only bits. Also known as percussion or impact bits. To achieve maximum drilling depth, break up and remove the core every 4” before drilling deeper.
Drill bits include a pilot drill to make starting holes easier.
For technical drawings and 3-D models, click on a part number.
| Size | Decimal Size Equivalent | Overall Lg. | Max. Drilling Dp. | Shank Type | Point Style | Specifications Met | For Use On | Includes | Each | |
Uncoated Carbide-Tipped Steel | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| 1 1/2" | 1.5" | 17" | 12" | SDS Max | Standard | ANSI B212.15 | Masonry, Concrete | Pilot Drill | 00000000 | 0000000 |
| 1 3/4" | 1.75" | 17" | 12" | SDS Max | Standard | ANSI B212.15 | Masonry, Concrete | Pilot Drill | 00000000 | 000000 |
| 2" | 2" | 17" | 12" | SDS Max | Standard | ANSI B212.15 | Masonry, Concrete | Pilot Drill | 00000000 | 000000 |
| 2 1/2" | 2.5" | 17" | 12" | SDS Max | Standard | ANSI B212.15 | Masonry, Concrete | Pilot Drill | 00000000 | 000000 |
| 3" | 3" | 17" | 12" | SDS Max | Standard | ANSI B212.15 | Masonry, Concrete | Pilot Drill | 00000000 | 000000 |
| 3 1/2" | 3.5" | 17" | 12" | SDS Max | Standard | ANSI B212.15 | Masonry, Concrete | Pilot Drill | 00000000 | 000000 |
| 4" | 4" | 17" | 12" | SDS Max | Standard | ANSI B212.15 | Masonry, Concrete | Pilot Drill | 00000000 | 000000 |
| 4 1/2" | 4.5" | 17" | 12" | SDS Max | Standard | ANSI B212.15 | Masonry, Concrete | Pilot Drill | 00000000 | 000000 |
| 5" | 5" | 17" | 12" | SDS Max | Standard | ANSI B212.15 | Masonry, Concrete | Pilot Drill | 00000000 | 000000 |
| Size | Decimal Size Equivalent | Overall Lg. | Material | Specifications Met | Each | |
| 1 1/2" | 1.5" | 5" | Uncoated Carbide-Tipped Steel | ANSI B212.15 | 0000000 | 0000000 |
| 1 3/4" | 1.75" | 5" | Uncoated Carbide-Tipped Steel | ANSI B212.15 | 0000000 | 000000 |
| 2" | 2" | 5" | Uncoated Carbide-Tipped Steel | ANSI B212.15 | 0000000 | 000000 |
| 2 1/2" | 2.5" | 5" | Uncoated Carbide-Tipped Steel | ANSI B212.15 | 0000000 | 000000 |
| 3" | 3" | 5" | Uncoated Carbide-Tipped Steel | ANSI B212.15 | 0000000 | 000000 |
| 3 1/2" | 3.5" | 5" | Uncoated Carbide-Tipped Steel | ANSI B212.15 | 0000000 | 000000 |
| 4" | 4" | 5" | Uncoated Carbide-Tipped Steel | ANSI B212.15 | 0000000 | 000000 |
| 4 1/2" | 4.5" | 5" | Uncoated Carbide-Tipped Steel | ANSI B212.15 | 0000000 | 000000 |
| 5" | 5" | 5" | Uncoated Carbide-Tipped Steel | ANSI B212.15 | 0000000 | 000000 |
| Material | Each | |
| Steel | 00000000 | 000000 |
| For Drill Bit Size | Material | Each | |
| 1 1/2", 1 3/4", 2 1/2", 2", 3 1/2", 3", 4 1/2", 4", 5" | Carbide-Tipped Steel | 0000000 | 000000 |
SDS-Max-Shank Masonry Core
Drill Bits for Rotary Hammers
These hollow bits cut with their outside edge for drilling large holes. The SDS-Max shank has three deep slots and two shallow slots for use with SDS-Max-drive rotary hammers. They cannot be used with SDS-Plus-drive rotary hammers. Drill holes using simultaneous rotary and hammering action to break masonry material into tiny granules. This type of bit drills faster and penetrates material with less pressure than rotary-only bits. Also known as percussion or impact bits. The included pilot drill makes starting holes easier.
| Size | Decimal Size Equivalent | Shank Type | Point Style | Specifications Met | For Use On | Includes | Max. Drilling Dp. | Each | |
12" Overall Lg. | |||||||||
|---|---|---|---|---|---|---|---|---|---|
Inch | |||||||||
Uncoated Carbide-Tipped Steel | |||||||||
| 1 3/4" | 1.75" | SDS Max | Standard | ANSI B212.15 | Masonry, Concrete | Pilot Drill, Core Ejector Key | 7" | 00000000 | 0000000 |
| 2" | 2" | SDS Max | Standard | ANSI B212.15 | Masonry, Concrete | Pilot Drill, Core Ejector Key | 7" | 00000000 | 000000 |
| 2 5/8" | 2.625" | SDS Max | Standard | ANSI B212.15 | Masonry, Concrete | Pilot Drill, Core Ejector Key | 7" | 00000000 | 000000 |
| 3 1/4" | 3.25" | SDS Max | Standard | ANSI B212.15 | Masonry, Concrete | Pilot Drill, Core Ejector Key | 7" | 00000000 | 000000 |
| 3 9/16" | 3.5625" | SDS Max | Standard | ANSI B212.15 | Masonry, Concrete | Pilot Drill, Core Ejector Key | 7" | 00000000 | 000000 |
22" Overall Lg. | |||||||||
Inch | |||||||||
Uncoated Carbide-Tipped Steel | |||||||||
| 1 3/4" | 1.75" | SDS Max | Standard | ANSI B212.15 | Masonry, Concrete | Pilot Drill, Core Ejector Key | 17" | 00000000 | 000000 |
| 2" | 2" | SDS Max | Standard | ANSI B212.15 | Masonry, Concrete | Pilot Drill, Core Ejector Key | 17" | 00000000 | 000000 |
| 2 5/8" | 2.625" | SDS Max | Standard | ANSI B212.15 | Masonry, Concrete | Pilot Drill, Core Ejector Key | 17" | 00000000 | 000000 |
| 3 1/4" | 3.25" | SDS Max | Standard | ANSI B212.15 | Masonry, Concrete | Pilot Drill, Core Ejector Key | 17" | 00000000 | 000000 |
| 4" | 4" | SDS Max | Standard | ANSI B212.15 | Masonry, Concrete | Pilot Drill, Core Ejector Key | 17" | 00000000 | 000000 |
| 5" | 5" | SDS Max | Standard | ANSI B212.15 | Masonry, Concrete | Pilot Drill, Core Ejector Key | 17" | 00000000 | 000000 |
| Replacement Pilot Drill with Core Ejector Key | 00000000 | Each | 000000 |
Changeable-Size Spline-Shank Masonry
Core Drill Bits for Rotary Hammers
These bits allow you to switch to another size by changing only the bit body. They are hollow and cut with their outside edge for drilling large holes. The shank has 12 splines for use with a spline-drive rotary hammer. Drill holes using simultaneous rotary and hammering action to break masonry material into tiny granules. This type of bit drills faster and penetrates material with less pressure than rotary-only bits. Also called percussion or impact bits.
Drill bits include a pilot drill to make starting holes easier.
For technical drawings and 3-D models, click on a part number.
| Size | Decimal Size Equivalent | Overall Lg. | Max. Drilling Dp. | Shank Type | Point Style | Specifications Met | For Use On | Includes | Each | |
Uncoated Carbide-Tipped Steel | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| 1 1/2" | 1.5" | 17" | 12" | Spline | Standard | ANSI B212.15 | Masonry, Concrete | Pilot Drill | 00000000 | 0000000 |
| 1 3/4" | 1.75" | 17" | 12" | Spline | Standard | ANSI B212.15 | Masonry, Concrete | Pilot Drill | 00000000 | 000000 |
| 2" | 2" | 17" | 12" | Spline | Standard | ANSI B212.15 | Masonry, Concrete | Pilot Drill | 00000000 | 000000 |
| 2 1/2" | 2.5" | 17" | 12" | Spline | Standard | ANSI B212.15 | Masonry, Concrete | Pilot Drill | 00000000 | 000000 |
| 3" | 3" | 17" | 12" | Spline | Standard | ANSI B212.15 | Masonry, Concrete | Pilot Drill | 00000000 | 000000 |
| 3 1/2" | 3.5" | 17" | 12" | Spline | Standard | ANSI B212.15 | Masonry, Concrete | Pilot Drill | 00000000 | 000000 |
| 4" | 4" | 17" | 12" | Spline | Standard | ANSI B212.15 | Masonry, Concrete | Pilot Drill | 00000000 | 000000 |
| 4 1/2" | 4.5" | 17" | 12" | Spline | Standard | ANSI B212.15 | Masonry, Concrete | Pilot Drill | 00000000 | 000000 |
| 5" | 5" | 17" | 12" | Spline | Standard | ANSI B212.15 | Masonry, Concrete | Pilot Drill | 00000000 | 000000 |
| Size | Decimal Size Equivalent | Overall Lg. | Material | Specifications Met | Each | |
| 1 1/2" | 1.5" | 5" | Uncoated Carbide-Tipped Steel | ANSI B212.15 | 0000000 | 0000000 |
| 1 3/4" | 1.75" | 5" | Uncoated Carbide-Tipped Steel | ANSI B212.15 | 0000000 | 000000 |
| 2" | 2" | 5" | Uncoated Carbide-Tipped Steel | ANSI B212.15 | 0000000 | 000000 |
| 2 1/2" | 2.5" | 5" | Uncoated Carbide-Tipped Steel | ANSI B212.15 | 0000000 | 000000 |
| 3" | 3" | 5" | Uncoated Carbide-Tipped Steel | ANSI B212.15 | 0000000 | 000000 |
| 3 1/2" | 3.5" | 5" | Uncoated Carbide-Tipped Steel | ANSI B212.15 | 0000000 | 000000 |
| 4" | 4" | 5" | Uncoated Carbide-Tipped Steel | ANSI B212.15 | 0000000 | 000000 |
| 4 1/2" | 4.5" | 5" | Uncoated Carbide-Tipped Steel | ANSI B212.15 | 0000000 | 000000 |
| 5" | 5" | 5" | Uncoated Carbide-Tipped Steel | ANSI B212.15 | 0000000 | 000000 |
| Material | Each | |
| Steel | 00000000 | 000000 |
| For Drill Bit Size | Material | Each | |
| 1 1/2", 1 3/4", 2 1/2", 2", 3 1/2", 3", 4 1/2", 4", 5" | Carbide-Tipped Steel | 0000000 | 000000 |
SDS-Plus-Shank Hollow Masonry
Drill Bits for Dust Containment
When connected to a vacuum, these hollow bits can suck up concrete dust while drilling to help meet OSHA standards for silica dust exposure. They can also be used to clean out holes for installing adhesive anchors. The SDS-Plus shank has two deep slots and two shallow slots for use with SDS-Plus-drive rotary hammers. They cannot be used with SDS-Max-drive rotary hammers.
| Size | Decimal Size Equivalent | Overall Lg. | Max. Drilling Dp. | Shank Type | Point Style | For Vacuum Hose ID | For Use On | Each | |
Inch | |||||||||
|---|---|---|---|---|---|---|---|---|---|
Titanium-Nitride (TiN) Coated Carbide-Tipped Steel | |||||||||
| 7/16" | 0.4375" | 13" | 7 1/2" | SDS Plus | Standard | 1 3/8" | Masonry, Concrete | 000000 | 000000 |
| 1/2" | 0.5" | 13" | 7 1/2" | SDS Plus | Standard | 1 3/8" | Masonry, Concrete | 000000 | 00000 |
| 9/16" | 0.5625" | 15" | 10" | SDS Plus | Standard | 1 3/8" | Masonry, Concrete | 000000 | 000000 |
| 5/8" | 0.625" | 15" | 10" | SDS Plus | Standard | 1 3/8" | Masonry, Concrete | 000000 | 000000 |
| 11/16" | 0.6875" | 18" | 12 1/2" | SDS Plus | Standard | 1 3/8" | Masonry, Concrete | 000000 | 000000 |
| 3/4" | 0.75" | 18" | 12 1/2" | SDS Plus | Standard | 1 3/8" | Masonry, Concrete | 000000 | 000000 |