Thread Size Thread Size |
|---|
Length Length |
|---|
Head Type Head Type |
|---|
 | Headless |
Material Material |
|---|
|
Drive Style Drive Style |
|---|
 | Hex |
Thread Spacing Thread Spacing |
|---|
|
Tip Material Tip Material |
|---|
|
Tip Diameter Tip Diameter |
|---|
Thread Direction Thread Direction |
|---|
 | Right Hand |
Hardness Hardness |
|---|
|
Finish Finish |
|---|
|
About Set Screws
More
Metric Alloy Steel Ball-Point Set Screws
These set screws have a rolling ball that swivels 360° to minimize surface damage and allow for slight adjustments without loosening the screw. Length listed is the overall length.
For technical drawings and 3-D models, click on a part number.
| Lg., mm | Tip Dia., mm | Drive Size, mm | Hardness | Each | |
Alloy Steel | |||||
|---|---|---|---|---|---|
M4 × 0.7 mm | |||||
| 6 | 2.5 | 2 | Rockwell C39 | 000000000 | 00000 |
| 8 | 2.5 | 2 | Rockwell C39 | 000000000 | 0000 |
| 12 | 2.5 | 2 | Rockwell C39 | 000000000 | 0000 |
M5 × 0.8 mm | |||||
| 8 | 3 | 2.5 | Rockwell C39 | 000000000 | 0000 |
| 12 | 3 | 2.5 | Rockwell C39 | 000000000 | 0000 |
| 20 | 3 | 2.5 | Rockwell C39 | 000000000 | 0000 |
M6 × 1 mm | |||||
| 10.8 | 4 | 3 | Rockwell C39 | 000000000 | 0000 |
| 12.8 | 4 | 3 | Rockwell C39 | 000000000 | 0000 |
| 16.8 | 4 | 3 | Rockwell C39 | 000000000 | 0000 |
| 20.8 | 4 | 3 | Rockwell C39 | 000000000 | 0000 |
| 25.8 | 4 | 3 | Rockwell C39 | 000000000 | 0000 |
M8 × 1.25 mm | |||||
| 11.2 | 5.5 | 4 | Rockwell C39 | 000000000 | 0000 |
| 13.2 | 5.5 | 4 | Rockwell C39 | 000000000 | 0000 |
| 17.2 | 5.5 | 4 | Rockwell C39 | 000000000 | 0000 |
| 21.2 | 5.5 | 4 | Rockwell C39 | 000000000 | 0000 |
| 31.2 | 5.5 | 4 | Rockwell C39 | 000000000 | 0000 |
M10 × 1.5 mm | |||||
| 17.7 | 7 | 5 | Rockwell C39 | 000000000 | 0000 |
| 21.7 | 7 | 5 | Rockwell C39 | 000000000 | 0000 |
| 26.7 | 7 | 5 | Rockwell C39 | 000000000 | 0000 |
| 36.7 | 7 | 5 | Rockwell C39 | 000000000 | 0000 |
M12 × 1.75 mm | |||||
| 22 | 8.5 | 6 | Rockwell C39 | 000000000 | 0000 |
| 27 | 8.5 | 6 | Rockwell C39 | 000000000 | 0000 |
| 32 | 8.5 | 6 | Rockwell C39 | 000000000 | 0000 |
| 42 | 8.5 | 6 | Rockwell C39 | 000000000 | 0000 |
Alloy Steel Ball-Point Set Screws
A rolling ball swivels 360° to minimize surface damage and allow for slight adjustments without loosening the screw. Length listed is the overall length.
For technical drawings and 3-D models, click on a part number.
| Lg. | Tip Dia. | Drive Size | Hardness | Each | |
Black-Oxide Alloy Steel | |||||
|---|---|---|---|---|---|
1/4"-20 | |||||
| 1/2" | 0.157" | 1/8" | Rockwell C39 | 000000000 | 00000 |
| 3/4" | 0.157" | 1/8" | Rockwell C39 | 000000000 | 0000 |
5/16"-18 | |||||
| 3/4" | 0.216" | 5/32" | Rockwell C39 | 000000000 | 0000 |
| 1" | 0.216" | 5/32" | Rockwell C39 | 000000000 | 0000 |
3/8"-16 | |||||
| 3/4" | 0.275" | 3/16" | Rockwell C39 | 000000000 | 0000 |
| 1" | 0.275" | 3/16" | Rockwell C39 | 000000000 | 0000 |
1/2"-13 | |||||
| 1" | 0.334" | 1/4" | Rockwell C39 | 000000000 | 0000 |
| 1 1/2" | 0.334" | 1/4" | Rockwell C39 | 000000000 | 0000 |
5/8"-11 | |||||
| 1" | 0.472" | 5/16" | Rockwell C39 | 000000000 | 0000 |
| 1 1/2" | 0.472" | 5/16" | Rockwell C39 | 000000000 | 0000 |
Stainless Steel Ball-Point Set Screws
Made from 18-8 stainless steel, these set screws are chemical resistant and may be mildly magnetic. A rolling ball swivels 360° to minimize surface damage and allow for slight adjustments without loosening the screw. Length listed is the overall length.
For technical drawings and 3-D models, click on a part number.
Tip | ||||||
|---|---|---|---|---|---|---|
| Lg. | Dia. | Material | Drive Size | Hardness | Each | |
18-8 Stainless Steel | ||||||
1/4"-20 | ||||||
| 1/2" | 0.157" | 440 Stainless Steel | 1/8" | Rockwell C54 | 000000000 | 00000 |
| 3/4" | 0.157" | 440 Stainless Steel | 1/8" | Rockwell C54 | 000000000 | 0000 |
5/16"-18 | ||||||
| 3/4" | 0.216" | 440 Stainless Steel | 5/32" | Rockwell C54 | 000000000 | 0000 |
| 1" | 0.216" | 440 Stainless Steel | 5/32" | Rockwell C54 | 000000000 | 0000 |
3/8"-16 | ||||||
| 3/4" | 0.275" | 440 Stainless Steel | 3/16" | Rockwell C54 | 000000000 | 0000 |
| 1" | 0.275" | 440 Stainless Steel | 3/16" | Rockwell C54 | 000000000 | 0000 |
1/2"-13 | ||||||
| 1" | 0.334" | 440 Stainless Steel | 1/4" | Rockwell C54 | 000000000 | 0000 |
| 1 1/2" | 0.334" | 440 Stainless Steel | 1/4" | Rockwell C54 | 000000000 | 0000 |
5/8"-11 | ||||||
| 1" | 0.472" | 440 Stainless Steel | 5/16" | Rockwell C54 | 000000000 | 00000 |
| 1 1/2" | 0.472" | 440 Stainless Steel | 5/16" | Rockwell C54 | 000000000 | 00000 |
Ultra-Fine-Thread Ball-Point Set Screws
Fine threads give you precise control. A rolling ball swivels 360° to minimize surface damage and allow for slight adjustments without loosening the screw. Made from 18-8 stainless steel, these set screws are chemical resistant and may be mildly magnetic. To install screws in unthreaded holes, use an optional threaded insert (sold separately). Length listed is the overall length.
For technical drawings and 3-D models, click on a part number.
Tip | ||||||
|---|---|---|---|---|---|---|
| Lg. | Dia. | Material | Drive Size | Hardness | Each | |
6-80 | ||||||
| 3/8" | 0.094" | Alloy Steel | 5/64" | Not Rated | 000000000 | 000000 |
| 7/16" | 0.094" | Alloy Steel | 5/64" | Not Rated | 000000000 | 00000 |
| 1/2" | 0.094" | Alloy Steel | 5/64" | Not Rated | 000000000 | 00000 |
| 37/64" | 0.094" | Alloy Steel | 5/64" | Not Rated | 000000000 | 00000 |
| 3/4" | 0.094" | Alloy Steel | 5/64" | Not Rated | 000000000 | 00000 |
| 7/8" | 0.094" | Alloy Steel | 5/64" | Not Rated | 000000000 | 00000 |
| 1" | 0.094" | Alloy Steel | 5/64" | Not Rated | 000000000 | 00000 |
| 1 1/8" | 0.094" | Alloy Steel | 5/64" | Not Rated | 000000000 | 00000 |
| 1 1/4" | 0.094" | Alloy Steel | 5/64" | Not Rated | 000000000 | 00000 |
| 1 1/2" | 0.094" | Alloy Steel | 5/64" | Not Rated | 000000000 | 00000 |
3/16"-100 | ||||||
| 3/8" | 0.156" | Alloy Steel | 3/32" | Not Rated | 000000000 | 0000 |
| 1/2" | 0.156" | Alloy Steel | 3/32" | Not Rated | 000000000 | 0000 |
| 3/4" | 0.156" | Alloy Steel | 3/32" | Not Rated | 000000000 | 0000 |
| 1" | 0.156" | Alloy Steel | 3/32" | Not Rated | 000000000 | 0000 |
| 1 1/4" | 0.156" | Alloy Steel | 3/32" | Not Rated | 000000000 | 0000 |
| 1 1/2" | 0.156" | Alloy Steel | 3/32" | Not Rated | 000000000 | 0000 |
| 1 3/4" | 0.156" | Alloy Steel | 3/32" | Not Rated | 000000000 | 0000 |
| 2" | 0.156" | Alloy Steel | 3/32" | Not Rated | 000000000 | 0000 |
1/4"-80 | ||||||
| 3/8" | 0.156" | Alloy Steel | 3/32" | Not Rated | 000000000 | 0000 |
| 1/2" | 0.156" | Alloy Steel | 3/32" | Not Rated | 000000000 | 0000 |
| 3/4" | 0.156" | Alloy Steel | 3/32" | Not Rated | 000000000 | 0000 |
| 1" | 0.156" | Alloy Steel | 3/32" | Not Rated | 000000000 | 0000 |
| 1 1/4" | 0.156" | Alloy Steel | 3/32" | Not Rated | 000000000 | 0000 |
| 1 1/2" | 0.156" | Alloy Steel | 3/32" | Not Rated | 000000000 | 0000 |
| 1 3/4" | 0.156" | Alloy Steel | 3/32" | Not Rated | 000000000 | 0000 |
| 2" | 0.156" | Alloy Steel | 3/32" | Not Rated | 000000000 | 00000 |
| 2 1/4" | 0.156" | Alloy Steel | 3/32" | Not Rated | 000000000 | 00000 |
| 2 1/2" | 0.156" | Alloy Steel | 3/32" | Not Rated | 000000000 | 00000 |
| 2 3/4" | 0.156" | Alloy Steel | 3/32" | Not Rated | 000000000 | 00000 |
| 3" | 0.156" | Alloy Steel | 3/32" | Not Rated | 000000000 | 00000 |
| 3 1/4" | 0.156" | Alloy Steel | 3/32" | Not Rated | 000000000 | 00000 |
| 3 1/2" | 0.156" | Alloy Steel | 3/32" | Not Rated | 000000000 | 00000 |
| 3 3/4" | 0.156" | Alloy Steel | 3/32" | Not Rated | 000000000 | 00000 |
| 4" | 0.156" | Alloy Steel | 3/32" | Not Rated | 000000000 | 00000 |
1/4"-100 | ||||||
| 3/8" | 0.156" | Alloy Steel | 3/32" | Not Rated | 000000000 | 00000 |
| 1/2" | 0.156" | Alloy Steel | 3/32" | Not Rated | 000000000 | 00000 |
| 3/4" | 0.156" | Alloy Steel | 3/32" | Not Rated | 000000000 | 00000 |
| 1" | 0.156" | Alloy Steel | 3/32" | Not Rated | 000000000 | 00000 |
| 1 1/4" | 0.156" | Alloy Steel | 3/32" | Not Rated | 000000000 | 00000 |
| 1 1/2" | 0.156" | Alloy Steel | 3/32" | Not Rated | 000000000 | 00000 |
| 1 3/4" | 0.156" | Alloy Steel | 3/32" | Not Rated | 000000000 | 00000 |
| 2" | 0.156" | Alloy Steel | 3/32" | Not Rated | 000000000 | 00000 |
| 2 1/4" | 0.156" | Alloy Steel | 3/32" | Not Rated | 000000000 | 00000 |
| 2 1/2" | 0.156" | Alloy Steel | 3/32" | Not Rated | 000000000 | 00000 |
| 2 3/4" | 0.156" | Alloy Steel | 3/32" | Not Rated | 000000000 | 00000 |
| 3" | 0.156" | Alloy Steel | 3/32" | Not Rated | 000000000 | 00000 |
| 3 1/4" | 0.156" | Alloy Steel | 3/32" | Not Rated | 000000000 | 00000 |
| 3 1/2" | 0.156" | Alloy Steel | 3/32" | Not Rated | 000000000 | 00000 |
| 3 3/4" | 0.156" | Alloy Steel | 3/32" | Not Rated | 000000000 | 00000 |
| 4" | 0.156" | Alloy Steel | 3/32" | Not Rated | 000000000 | 00000 |
Tip | ||||||
|---|---|---|---|---|---|---|
| Lg., mm | Dia., mm | Material | Drive Size, mm | Hardness | Each | |
M2.5 × 0.2 mm | ||||||
| 8 | 1.5 | Alloy Steel | 1.5 | Not Rated | 000000000 | 000000 |
| 10 | 1.5 | Alloy Steel | 1.5 | Not Rated | 000000000 | 00000 |
| 12 | 1.5 | Alloy Steel | 1.5 | Not Rated | 000000000 | 00000 |
| 15 | 1.5 | Alloy Steel | 1.5 | Not Rated | 000000000 | 00000 |
| 20 | 1.5 | Alloy Steel | 1.5 | Not Rated | 000000000 | 00000 |
| 25 | 1.5 | Alloy Steel | 1.5 | Not Rated | 000000000 | 00000 |
M3 × 0.2 mm | ||||||
| 8 | 1.6 | Alloy Steel | 1.5 | Not Rated | 000000000 | 00000 |
| 10 | 1.6 | Alloy Steel | 1.5 | Not Rated | 000000000 | 00000 |
| 12 | 1.6 | Alloy Steel | 1.5 | Not Rated | 000000000 | 00000 |
| 15 | 1.6 | Alloy Steel | 1.5 | Not Rated | 000000000 | 00000 |
| 20 | 1.6 | Alloy Steel | 1.5 | Not Rated | 000000000 | 00000 |
| 25 | 1.6 | Alloy Steel | 1.5 | Not Rated | 000000000 | 00000 |
| 30 | 1.6 | Alloy Steel | 1.5 | Not Rated | 000000000 | 00000 |
| 33 | 1.6 | Alloy Steel | 1.5 | Not Rated | 000000000 | 00000 |
| 36 | 1.6 | Alloy Steel | 1.5 | Not Rated | 000000000 | 00000 |
| 39 | 1.6 | Alloy Steel | 1.5 | Not Rated | 000000000 | 00000 |
M3 × 0.25 mm | ||||||
| 8 | 1.6 | Alloy Steel | 1.5 | Not Rated | 000000000 | 00000 |
| 10 | 1.6 | Alloy Steel | 1.5 | Not Rated | 000000000 | 00000 |
| 12 | 1.6 | Alloy Steel | 1.5 | Not Rated | 000000000 | 00000 |
| 15 | 1.6 | Alloy Steel | 1.5 | Not Rated | 000000000 | 00000 |
| 20 | 1.6 | Alloy Steel | 1.5 | Not Rated | 000000000 | 00000 |
| 25 | 1.6 | Alloy Steel | 1.5 | Not Rated | 000000000 | 00000 |
| 30 | 1.6 | Alloy Steel | 1.5 | Not Rated | 000000000 | 00000 |
| 33 | 1.6 | Alloy Steel | 1.5 | Not Rated | 000000000 | 00000 |
| 36 | 1.6 | Alloy Steel | 1.5 | Not Rated | 000000000 | 00000 |
| 39 | 1.6 | Alloy Steel | 1.5 | Not Rated | 000000000 | 00000 |
Flange | ||||||
|---|---|---|---|---|---|---|
| Installed Lg. | Dia. | Thick. | For Max. Hole Dia. | Drill Bit Size | Each | |
6-80 | ||||||
| 0.25" | 1/4" | 0.03" | 7/32" | 7/32" | 000000000 | 00000 |
| 0.375" | 1/4" | 0.03" | 7/32" | 7/32" | 000000000 | 0000 |
3/16"-100 | ||||||
| 0.313" | 0.29" | 0.01" | 1/4" | 1/4" | 000000000 | 0000 |
| 0.438" | 0.29" | 0.01" | 1/4" | 1/4" | 000000000 | 0000 |
| 0.625" | 0.29" | 0.01" | 1/4" | 1/4" | 000000000 | 0000 |
| 0.75" | 0.29" | 0.01" | 1/4" | 1/4" | 000000000 | 0000 |
1/4"-80 | ||||||
| 0.313" | 0.352" | 0.01" | 5/16" | 5/16" | 000000000 | 0000 |
| 0.438" | 0.352" | 0.01" | 5/16" | 5/16" | 000000000 | 0000 |
| 0.625" | 0.352" | 0.01" | 5/16" | 5/16" | 000000000 | 0000 |
| 0.75" | 0.352" | 0.01" | 5/16" | 5/16" | 000000000 | 0000 |
1/4"-100 | ||||||
| 0.313" | 0.352" | 0.01" | 5/16" | 5/16" | 000000000 | 0000 |
| 0.438" | 0.352" | 0.01" | 5/16" | 5/16" | 000000000 | 0000 |
| 0.625" | 0.352" | 0.01" | 5/16" | 5/16" | 000000000 | 0000 |
| 0.75" | 0.352" | 0.01" | 5/16" | 5/16" | 000000000 | 0000 |
Flange | ||||||
|---|---|---|---|---|---|---|
| Installed Lg., mm | Dia., mm | Thick., mm | For Max. Hole Dia., mm | Drill Bit Size, mm | Each | |
M2.5 × 0.2 mm | ||||||
| 7 | 4.5 | 0.5 | 4 | 4 | 000000000 | 00000 |
M3 × 0.2 mm | ||||||
| 5 | 4.95 | 0.25 | 4.5 | 4.5 | 000000000 | 0000 |
| 7 | 4.95 | 0.25 | 4.5 | 4.5 | 000000000 | 0000 |
| 9 | 4.95 | 0.25 | 4.5 | 4.5 | 000000000 | 0000 |
M3 × 0.25 mm | ||||||
| 5 | 4.95 | 0.25 | 4.5 | 4.5 | 000000000 | 0000 |
| 7 | 4.95 | 0.25 | 4.5 | 4.5 | 000000000 | 0000 |
| 9 | 4.95 | 0.25 | 4.5 | 4.5 | 000000000 | 0000 |
Swivel-Tip Set Screws
The tip is narrow to pass through threaded holes. As you tighten these set screws, a self-aligning tip swivels to make contact against angled and uneven surfaces. It stops rotating on contact to minimize damage to the contact surface. A black-oxide finish provides corrosion resistance in dry environments. Length listed is the overall length.
For technical drawings and 3-D models, click on a part number.
Tip | |||||||
|---|---|---|---|---|---|---|---|
| Lg. | Dia. | Lg. | Max. Swivel Angle | Drive Size | Hardness | Each | |
Black-Oxide Alloy Steel | |||||||
10-32 | |||||||
| 1/2" | 0.141" | 0.125" | 7.5° | 3/32" | Rockwell C45 | 000000000 | 00000 |
1/4"-20 | |||||||
| 1/2" | 0.188" | 0.156" | 7.5° | 1/8" | Rockwell C45 | 000000000 | 0000 |
| 3/4" | 0.188" | 0.156" | 7.5° | 1/8" | Rockwell C45 | 000000000 | 0000 |
| 1" | 0.188" | 0.156" | 7.5° | 1/8" | Rockwell C45 | 000000000 | 0000 |
| 1 1/2" | 0.188" | 0.156" | 7.5° | 1/8" | Rockwell C45 | 000000000 | 0000 |
5/16"-18 | |||||||
| 3/4" | 0.25" | 0.188" | 7.5° | 5/32" | Rockwell C45 | 000000000 | 0000 |
| 1" | 0.25" | 0.188" | 7.5° | 5/32" | Rockwell C45 | 000000000 | 0000 |
| 1 1/2" | 0.25" | 0.188" | 7.5° | 5/32" | Rockwell C45 | 000000000 | 0000 |
| 2" | 0.25" | 0.188" | 7.5° | 5/32" | Rockwell C45 | 000000000 | 0000 |
3/8"-16 | |||||||
| 3/4" | 0.297" | 0.234" | 7.5° | 3/16" | Rockwell C45 | 000000000 | 0000 |
| 1" | 0.297" | 0.234" | 7.5° | 3/16" | Rockwell C45 | 000000000 | 0000 |
| 1 1/2" | 0.297" | 0.234" | 7.5° | 3/16" | Rockwell C45 | 000000000 | 0000 |
| 2" | 0.297" | 0.234" | 7.5° | 3/16" | Rockwell C45 | 000000000 | 0000 |
1/2"-13 | |||||||
| 3/4" | 0.406" | 0.266" | 7.5° | 1/4" | Rockwell C45 | 000000000 | 00000 |
| 1" | 0.406" | 0.266" | 7.5° | 1/4" | Rockwell C45 | 000000000 | 0000 |
| 1 1/2" | 0.406" | 0.266" | 7.5° | 1/4" | Rockwell C45 | 000000000 | 0000 |
| 2" | 0.406" | 0.266" | 7.5° | 1/4" | Rockwell C45 | 000000000 | 0000 |
| 3" | 0.406" | 0.266" | 7.5° | 1/4" | Rockwell C45 | 000000000 | 00000 |
5/8"-11 | |||||||
| 2" | 0.5" | 0.344" | 7.5° | 5/16" | Rockwell C45 | 000000000 | 00000 |
| 3" | 0.5" | 0.344" | 7.5° | 5/16" | Rockwell C45 | 000000000 | 00000 |
3/4"-10 | |||||||
| 1 1/2" | 0.625" | 0.438" | 7.5° | 3/8" | Rockwell C45 | 000000000 | 00000 |
| 2 1/2" | 0.625" | 0.438" | 7.5° | 3/8" | Rockwell C45 | 000000000 | 00000 |
Metric Alloy Steel Low-Profile Swivel-Tip Set Screws
A low-profile flat-faced ball tip allows these set screw to be used in low-clearance applications. They're also known as ball-ended thrust screws. Length listed is the overall length.
For technical drawings and 3-D models, click on a part number.
| Lg., mm | Tip Dia., mm | Max. Swivel Angle | Drive Size, mm | Hardness | Each | |
Alloy Steel | ||||||
|---|---|---|---|---|---|---|
M5 × 0.8 mm | ||||||
| 9.5 | 2.2 | 9° | 2.5 | Rockwell C39 | 000000000 | 00000 |
| 15.5 | 2.2 | 9° | 2.5 | Rockwell C39 | 000000000 | 0000 |
| 24.5 | 2.2 | 9° | 2.5 | Rockwell C39 | 000000000 | 0000 |
M6 × 1 mm | ||||||
| 16 | 3.2 | 9° | 3 | Rockwell C39 | 000000000 | 0000 |
| 20 | 3.2 | 9° | 3 | Rockwell C39 | 000000000 | 0000 |
| 25 | 3.2 | 9° | 3 | Rockwell C39 | 000000000 | 0000 |
M8 × 1.25 mm | ||||||
| 20 | 4.5 | 9° | 4 | Rockwell C39 | 000000000 | 0000 |
| 25 | 4.5 | 9° | 4 | Rockwell C39 | 000000000 | 0000 |
| 30 | 4.5 | 9° | 4 | Rockwell C39 | 000000000 | 0000 |
M10 × 1.5 mm | ||||||
| 16 | 6 | 9° | 5 | Rockwell C39 | 000000000 | 0000 |
| 25 | 6 | 9° | 5 | Rockwell C39 | 000000000 | 0000 |
| 35 | 6 | 9° | 5 | Rockwell C39 | 000000000 | 00000 |
M12 × 1.75 mm | ||||||
| 16 | 7.2 | 9° | 6 | Rockwell C39 | 000000000 | 00000 |
| 30 | 7.2 | 9° | 6 | Rockwell C39 | 000000000 | 00000 |
| 40 | 7.2 | 9° | 6 | Rockwell C39 | 000000000 | 00000 |
Alloy Steel Low-Profile Swivel-Tip Set Screws
These set screws have a low-profile flat-faced ball tip for use in low-clearance applications. The body is alloy steel and has a black-oxide finish to resist corrosion in dry environments. These set screws are also known as ball-ended thrust screws. Length listed is the overall length.
For technical drawings and 3-D models, click on a part number.
| Lg. | Tip Dia. | Max. Swivel Angle | Drive Size | Hardness | Each | |
Black-Oxide Alloy Steel | ||||||
|---|---|---|---|---|---|---|
1/4"-20 | ||||||
| 1/2" | 0.12" | 9° | 1/8" | Rockwell C39 | 000000000 | 00000 |
| 3/4" | 0.12" | 9° | 1/8" | Rockwell C39 | 000000000 | 0000 |
5/16"-18 | ||||||
| 3/4" | 0.147" | 9° | 5/32" | Rockwell C39 | 000000000 | 0000 |
| 1" | 0.147" | 9° | 5/32" | Rockwell C39 | 000000000 | 0000 |
3/8"-16 | ||||||
| 3/4" | 0.192" | 9° | 3/16" | Rockwell C39 | 000000000 | 0000 |
| 1" | 0.192" | 9° | 3/16" | Rockwell C39 | 000000000 | 0000 |
1/2"-13 | ||||||
| 1" | 0.29" | 9° | 1/4" | Rockwell C39 | 000000000 | 0000 |
| 1 1/2" | 0.29" | 9° | 1/4" | Rockwell C39 | 000000000 | 00000 |
5/8"-11 | ||||||
| 1" | 0.372" | 9° | 5/16" | Rockwell C39 | 000000000 | 00000 |
| 1 1/2" | 0.372" | 9° | 5/16" | Rockwell C39 | 000000000 | 00000 |
Stainless Steel Low-Profile Swivel-Tip Set Screws
Made from stainless steel, these set screws are chemical resistant and may be mildly magnetic. These set screws have a low-profile flat-faced ball tip for use in low-clearance applications. Also known as ball-ended thrust screws. Length listed is the overall length.
For technical drawings and 3-D models, click on a part number.
| Lg. | Tip Dia. | Tip Material | Max. Swivel Angle | Drive Size | Hardness | Each | |
18-8 Stainless Steel | |||||||
|---|---|---|---|---|---|---|---|
1/4"-20 | |||||||
| 1/2" | 0.12" | 304 Stainless Steel | 9° | 1/8" | Rockwell C54 | 000000000 | 00000 |
| 3/4" | 0.12" | 304 Stainless Steel | 9° | 1/8" | Rockwell C54 | 000000000 | 0000 |
5/16"-18 | |||||||
| 3/4" | 0.147" | 304 Stainless Steel | 9° | 5/32" | Rockwell C54 | 000000000 | 00000 |
| 1" | 0.147" | 304 Stainless Steel | 9° | 5/32" | Rockwell C54 | 000000000 | 00000 |
3/8"-16 | |||||||
| 3/4" | 0.192" | 304 Stainless Steel | 9° | 3/16" | Rockwell C54 | 000000000 | 00000 |
| 1" | 0.192" | 304 Stainless Steel | 9° | 3/16" | Rockwell C54 | 000000000 | 00000 |
1/2"-13 | |||||||
| 1" | 0.29" | 304 Stainless Steel | 9° | 1/4" | Rockwell C54 | 000000000 | 00000 |
| 1 1/2" | 0.29" | 304 Stainless Steel | 9° | 1/4" | Rockwell C54 | 000000000 | 00000 |
5/8"-11 | |||||||
| 1" | 0.372" | 304 Stainless Steel | 9° | 5/16" | Rockwell C54 | 000000000 | 00000 |
| 1 1/2" | 0.372" | 304 Stainless Steel | 9° | 5/16" | Rockwell C54 | 000000000 | 00000 |
Large-Diameter Swivel-Tip Set Screws
A wide tip provides more gripping power than standard swivel-tip set screws. To use, remove the tip, thread the screw through the hole, and attach the tip on the other side. The tip swivels and tilts in all directions to apply uniform pressure to angled and uneven surfaces. It stops rotating on contact to minimize damage to the contact surface. A black-oxide finish provides corrosion resistance in dry environments. Length listed is the overall length. Optional extra-large steel tips offer more gripping strength. Optional plastic tips are soft, nonmarring, and made of acetal.
For technical drawings and 3-D models, click on a part number.
Set Screws | Optional Extra-Large Steel Tips | Optional Nonmarring Plastic Tips | Replacement Retaining Springs | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Lg. | Tip Dia. | Tip Lg. | Max. Swivel Angle | Drive Size | Hardness | Each | Dia. | Lg. | Each | Dia. | Lg. | Each | Each | ||||
Black-Oxide 12L14 Steel | |||||||||||||||||
1/4"-20 | |||||||||||||||||
| 1 7/8" | 0.313" | 0.188" | 10° | 1/8" | Not Rated | 000000000 | 00000 | 5/8" | 1/4" | 000000000 | 00000 | 1/4" | 1/4" | 000000000 | 00000 | 000000000 | 00000 |
| 2 5/8" | 0.313" | 0.188" | 10° | 1/8" | Not Rated | 000000000 | 0000 | 5/8" | 1/4" | 000000000 | 0000 | 1/4" | 1/4" | 000000000 | 0000 | 000000000 | 000 |
| 3 3/8" | 0.313" | 0.188" | 10° | 1/8" | Not Rated | 000000000 | 0000 | 5/8" | 1/4" | 000000000 | 0000 | 1/4" | 1/4" | 000000000 | 0000 | 000000000 | 000 |
5/16"-18 | |||||||||||||||||
| 2 3/16" | 0.375" | 0.219" | 10° | 5/32" | Not Rated | 000000000 | 0000 | 3/4" | 1/4" | 000000000 | 0000 | 3/8" | 1/4" | 000000000 | 0000 | 000000000 | 000 |
| 2 15/16" | 0.375" | 0.219" | 10° | 5/32" | Not Rated | 000000000 | 0000 | 3/4" | 1/4" | 000000000 | 0000 | 3/8" | 1/4" | 000000000 | 0000 | 000000000 | 000 |
| 4 7/16" | 0.375" | 0.219" | 10° | 5/32" | Not Rated | 000000000 | 0000 | 3/4" | 1/4" | 000000000 | 0000 | 3/8" | 1/4" | 000000000 | 0000 | 000000000 | 000 |
3/8"-16 | |||||||||||||||||
| 2 5/16" | 0.438" | 0.25" | 10° | 3/16" | Not Rated | 000000000 | 0000 | 3/4" | 3/8" | 000000000 | 0000 | 1/2" | 1/4" | 000000000 | 0000 | 000000000 | 000 |
| 3 1/16" | 0.438" | 0.25" | 10° | 3/16" | Not Rated | 000000000 | 0000 | 3/4" | 3/8" | 000000000 | 0000 | 1/2" | 1/4" | 000000000 | 0000 | 000000000 | 000 |
| 3 13/16" | 0.438" | 0.25" | 10° | 3/16" | Not Rated | 000000000 | 0000 | 3/4" | 3/8" | 000000000 | 0000 | 1/2" | 1/4" | 000000000 | 0000 | 000000000 | 000 |
| 5 5/16" | 0.438" | 0.25" | 10° | 3/16" | Not Rated | 000000000 | 0000 | 3/4" | 3/8" | 000000000 | 0000 | 1/2" | 1/4" | 000000000 | 0000 | 000000000 | 000 |
1/2"-13 | |||||||||||||||||
| 3 3/16" | 0.563" | 0.313" | 10° | 1/4" | Not Rated | 000000000 | 0000 | 7/8" | 3/8" | 000000000 | 0000 | 5/8" | 3/8" | 000000000 | 0000 | 000000000 | 000 |
| 3 15/16" | 0.563" | 0.313" | 10° | 1/4" | Not Rated | 000000000 | 0000 | 7/8" | 3/8" | 000000000 | 0000 | 5/8" | 3/8" | 000000000 | 0000 | 000000000 | 000 |
| 4 11/16" | 0.563" | 0.313" | 10° | 1/4" | Not Rated | 000000000 | 0000 | 7/8" | 3/8" | 000000000 | 0000 | 5/8" | 3/8" | 000000000 | 0000 | 000000000 | 000 |
| 6 3/16" | 0.563" | 0.313" | 10° | 1/4" | Not Rated | 000000000 | 00000 | 7/8" | 3/8" | 000000000 | 0000 | 5/8" | 3/8" | 000000000 | 0000 | 000000000 | 000 |
5/8"-11 | |||||||||||||||||
| 3 9/16" | 0.688" | 0.406" | 10° | 5/16" | Not Rated | 000000000 | 00000 | 1" | 1/2" | 000000000 | 0000 | 3/4" | 1/2" | 000000000 | 0000 | 000000000 | 000 |
| 5 1/16" | 0.688" | 0.406" | 10° | 5/16" | Not Rated | 000000000 | 00000 | 1" | 1/2" | 000000000 | 0000 | 3/4" | 1/2" | 000000000 | 0000 | 000000000 | 000 |
| 6 9/16" | 0.688" | 0.406" | 10° | 5/16" | Not Rated | 000000000 | 00000 | 1" | 1/2" | 000000000 | 0000 | 3/4" | 1/2" | 000000000 | 0000 | 000000000 | 000 |