Bumpers cushion doors and other moving parts to prevent damage and reduce noise.

Use in food-processing environments for cutting surfaces, liners, and other high-wear applications. These sheets and strips are FDA compliant for direct contact with food.

Even after repetitive compression, these super-soft sheets and strips maintain their cushioning ability. Use them to dampen noise and isolate vibration.

With a thin metal backing, these sheets are good for use in bumpers, wear pads, machinery mounts, and other applications where some structural support is needed.

Stronger than natural rubber, these polyurethane rods combine the shock-absorbing qualities of rubber with the tear resistance of plastic. Use them to seal narrow spaces such as channels.

Use these tubes as jackets, seals, and insulation in areas where rubbing and scraping could cause wear on rubber. They are made of polyurethane, which combines the shock-absorbing qualities of rubber with the tear resistance of plastic.

Made of FDA-listed materials, these sheets and strips are for use with food.

These platinum-cured silicone rubber sheets and strips meet the strict purity standards of USP Class VI.

Commonly used in electronics applications, these sheets transfer heat better than any other silicone we offer.

One layer of fiberglass cloth is inserted between two layers of silicone rubber to give these sheets and strips the strength to stand up to high stress and flex. Use them as flange gaskets and anywhere heavy compression would squeeze nonreinforced silicone rubber out of place.

Seal and cushion narrow spaces such as channels.

Meeting UL 94 V-0, these rods are flame retardant—use them to seal and cushion narrow spaces.

Seal and cushion corners with these 90° angles.

These 90° angles meet UL 94V0 for flame retardance.

Stronger and more durable than High-Strength Multipurpose Neoprene, this rubber can handle high-tension applications such as belting.

While other black rubber can leave a mark after use, these specially formulated neoprene sheets leave no evidence behind.

This neoprene dissipates static electrical charge, which can damage or cause equipment to malfunction.

These sheets and strips have one layer of cotton/polyester fabric for every 1/16" of thickness, so they maintain their size and shape under heavy compression better than the standard nonreinforced multipurpose neoprene. Use them as gaskets.

For every 1/4" of thickness there is one layer of super-strong fiberglass cloth that stands up to high stress and flex. Use these sheets as flange gaskets, diaphragm packing, and anywhere heavy compression would squeeze nonreinforced neoprene out of place.

Jackets, seals, and insulation are just a few of the many uses for rubber tubes.

These sheets and strips offer better shock-absorbing qualities and longer life than standard Oil-Resistant Buna-N.

With the greatest tensile strength of all our oil-resistant rubber, these super-strong Buna-N sheets and strips can handle high-tension applications, such as belting.

Because these sheets and strips are made from peroxide-cured Buna-N rubber, they have better heat resistance than standard Oil-Resistant Buna-N rubber sheets and strips.

To maintain their size and shape under heavy compression, these sheets have one layer of nylon fabric for every 1/16” of thickness. Use them as flange gaskets and diaphragm packing.

Applications for these tubes include jackets, seals, and insulation.

With greater strength than standard Weather-Resistant EPDM, these sheets and strips provide better shock-absorbing qualities and longer life.

Often used as inner tubes, butyl rubber won’t allow air, fumes, or gases to pass through.

These EPDM sheets and strips meet transportation industry standards for flammability, smoke, and toxicity. Use them as weather-resistant seals on windows and doors, pads to reduce vibration between panels, and exterior trim.

Resistant to sunlight, ozone, and water, these rods are sized to seal narrow spaces such as channels.

Used to seal narrow spaces such as channels, these tubes offer more compression than solid EPDM rods.

Offering higher tensile strength than standard Chemical-Resistant Viton® Fluoroelastomer, these sheets and strips provide greater tear resistance and longer life.

With equal chemical resistance to Viton® fluoroelastomer, Aflas provides a stronger, steam-tolerant alternative.

Resistant to the chemicals that are commonly used to clean and sterilize food-processing equipment, these sheets and strips are made from FDA-listed materials for use with food and beverage.

These small-diameter rods provide a seal in narrow spaces.

These dual-material foam sheets and strips have ultra-soft polyurethane foam on one side and chemical-resistant polyethylene foam on the other. They are widely used in packaging applications to absorb shock and damp vibration.

Commonly called memory foam and Confor, these sheets and strips have the best cushioning qualities of all the foam we offer.

Good for tough vacuum-sealing and low closure-force applications, these polyurethane foam sheets and strips have open/closed cells to keep water, air, and gases from being absorbed when they are compressed at least 25%. Even after extended compression, all bounce back to shape faster than other foams we offer.

Also known as Ethafoam.

These sheets and strips are made of cross-linked polyethylene, so they are stronger and more chemical resistant than other types of polyethylene foam.

Exceptionally strong, this lightweight ionomer foam offers excellent resistance to impact, UV light, and water. It stands up to wear caused by rubbing and scraping and is often used on bumpers and buoys.

Use these flexible polyurethane foam cords and circles to cushion narrow spaces, such as channels and gaps.

Also called plucking foam, these scored foam sheets allow you to pull out individual cubes for custom-shaped packaging.

There are hundreds of cushioning pillows in every foot of these pliable mesh sheets. They're often used as a protective liner in drawers and cabinets and anywhere a nonskid surface is required.

Just like the material found in wetsuits, these neoprene foam sheets are encased in nylon fabric for additional protection from wear caused by rubbing and abrasion.

Because this natural rubber foam readily bounces back to shape after compression, it’s a good choice for repetitive sealing applications, such as on doors.

These vinyl foam sheets and strips are so conformable that once they're compressed they won't fully spring back. Use them to fill gaps and seal uneven surfaces.

Made of EPDM, this foam has the best resistance to water, sunlight, and oxidation of all the foam we offer.

An economical alternative to neoprene foam, these Santoprene foam cords stand up to water, sunlight, and oxidation but lack oil resistance.

These EPDM foam tubes have the best resistance to water, sunlight, and oxidation of all the foam tubes we offer.

This premium silicone is the most resilient foam we offer. It is equivalent to Cohrlastic and is also known as Norseal and silicone sponge.

Prevent the spread of flames with these self-extinguishing silicone foam sheets and strips.

A thin layer of aluminized fiberglass on this silicone foam reflects heat to protect sensitive equipment.

Seal and damp vibration around high-temperature food-service equipment with these silicone foam sheets and strips.

In addition to being lighter in weight than silicone foam, this polyimide foam also remains soft and conformable across a broader temperature range.

These silicone foam cords meet NSF/ANSI 51 for food equipment materials. Use them to seal and cushion narrow spaces in food service equipment.

This foam meets UL fire extinguishing specifications. It's made from a blend of Buna-N, neoprene, and vinyl to offer offer good resistance to oil.

Cushion electronic components from impact as you protect them from electrostatic shocks during shipping and storing.

An economical alternative to Viton® fluoroelastomer foam, these semi-rigid nylon foam sheets offer good resistance to a wide range of chemicals.