Press Fit Rubber Feet | McMaster-Carr

Slip these inserts into tubular legs to quickly add threads for attaching leveling mounts. They’re often used in the legs of light equipment and furniture.

Leveling Mounts for Tubular Legs

Insert these adjustable mounts into tube ends to level your equipment in a single step.

Bumpers

Tight-Grip Push-In Bumpers

A ridge on the stem provides a tighter grip than other push-in bumpers. Push the stem into a hole for quick installation. These bumpers are commonly used as feet on instruments and bench-top equipment to keep them from sliding. They're also good as spacers between sheets of material. Also known as stem and grommet bumpers.

Push-In Bumpers

Push the stem into a hole for quick installation. These bumpers are commonly used as feet on instruments and bench-top equipment to keep them from sliding. They're also good as spacers between sheets of material. Also known as stem and grommet bumpers.

Compressible-Stem Push-In Bumpers

The stem on these bumpers compresses to fit into tight holes. Push the stem into a hole for quick installation. These bumpers are commonly used as feet on instruments and bench-top equipment to keep them from sliding. They're also good as spacers between sheets of material. Also known as stem and grommet bumpers.

Bumper Assortments

Keep bumpers of various shapes, materials, and mounting styles on hand to solve whatever problems arise.

Locators, Supports, and Stops

Mating Locating Pins and Hole Liners

Maintain consistent alignment in mating parts by installing a pin in one part and a liner in the other.

Locating Pins

Install these pins in a plate or table and mate with holes in a workpiece for precise alignment.

Shoulder-Style Locating Pins

The shoulder provides a consistent height reference point and keeps the pin from being pressed through the fixture.

Cast-In Locating Pins for Plastics

Encase these pins while molding plastic or composite parts. Once set, the knurls resist movement, letting you align the workpiece with precision on a plate or table.

Slotted Bushings

When locating a workpiece using through-hole alignment pins, use one of these bushings and one standard bushing to prevent the pins from binding in your fixture.

Floating Locating Pins

The head on these pins slides side-to-side in one direction. Use one of these pins and one standard round-head pin to prevent jamming when loading and unloading workpieces with inconsistent hole spacing.

Press-Fit Locating and Support Buttons

Support and position workpieces and fixtures from the bottom or side. These buttons press into a drilled hole for permanent installation.

Domed-Head Locating and Support Buttons

Support rounded or irregularly shaped workpieces from the bottom or side with minimal contact.

Spring-Loaded Guide Pins

As the workpiece pushes against the pin head in one direction, the internal spring pushes back to hold it in place for clamping.

Sealed Spring-Loaded Guide Pins

Sealed at the top to prevent debris from getting inside and making them seize up, these guide pins are a good choice for machining fixtures.

Create-Your-Own Spring-Loaded Guide Pins

Thread in a screw, handle, or other part to create the right size and shape guide pin for your application.

Tooling Balls

The shoulder on these tooling balls provides a consistent height reference point.

Adjustable-Height Tooling Balls

Install tooling balls in a workpiece or fixture to create a precise measurement reference point. Push the shank further into the hole to adjust the height of the ball.

Mounts, Feet, and Pads

Press-Fit Feet

Swiveling Press-Fit Feet

Angled Press-Fit Feet

High-Capacity Leveling Mount Inserts for Tubular Legs

Metric High-Capacity LevelingMount Inserts for Tubular Legs

Leveling Mount Inserts for Tubular Legs