About Plastic Hammer Faces
More
About Hammers
More
High-Visibility Dead Blow Mallets
A fluorescent orange color makes these mallets easy to see. The head is loaded with metal shot for added weight and a controlled impact with minimal rebound. All are suitable for driving chisels and striking work without damaging its surface. Choose a lighter weight mallet for tapping work into place and driving a chisel to make small cuts. Use heavier weight mallets when assembling joints, dislodging stuck parts, and making aggressive cuts with a chisel. Longer mallets allow for more powerful swings. A textured grip provides slip resistance.
Polyurethane rubber faces resist oils and solvents and won't crack under high impact. They're softer than metal faces, so they're good for striking plastic, wood, and sheet metal. All have a face hardness rating for comparing their hardness with other rubber and plastic faces. Soft faces have a hardness similar to that of a tire tread. Medium faces have a hardness that's suitable for most general purpose applications.
Brass faces are suitable for striking steel, iron, stone, and other hard surfaces.
| Head Wt. | Face Dia. | Face Hardness Rating | Face Color | Overall Lg. | Handle Material | Grip Style | Handle Replaceable | Each | |
Polyurethane Rubber Face | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 5 oz. | 7/8" | Medium | Fluorescent Orange | 9 1/2" | Polyurethane Rubber with Steel Core | Textured | Nonreplaceable | 0000000 | 000000 |
| 10 oz. | 1 1/4" | Soft | Fluorescent Orange | 10 1/4" | Polyurethane Rubber with Steel Core | Textured | Nonreplaceable | 0000000 | 00000 |
| 14 oz. | 1 1/4" | Medium | Fluorescent Orange | 10 1/2" | Polyurethane Rubber with Steel Core | Textured | Nonreplaceable | 0000000 | 00000 |
| 15 oz. | 1 1/4" | Soft | Fluorescent Orange | 10 1/2" | Polyurethane Rubber with Steel Core | Textured | Nonreplaceable | 0000000 | 00000 |
| 1 1/8 lbs. | 1 1/2" | Medium | Fluorescent Orange | 12 1/4" | Polyurethane Rubber with Steel Core | Textured | Nonreplaceable | 0000000 | 00000 |
| 1 1/8 lbs. | 1 5/8" | Soft | Fluorescent Orange | 11 1/4" | Polyurethane Rubber with Steel Core | Textured | Nonreplaceable | 0000000 | 00000 |
| 1 5/16 lbs. | 1 1/2" | Medium | Fluorescent Orange | 13" | Polyurethane Rubber with Steel Core | Textured | Nonreplaceable | 0000000 | 00000 |
| 1 3/8 lbs. | 1 1/2" | Soft | Fluorescent Orange | 11 3/4" | Polyurethane Rubber with Steel Core | Textured | Nonreplaceable | 0000000 | 00000 |
| 1 3/4 lbs. | 2" | Soft | Fluorescent Orange | 12 7/8" | Polyurethane Rubber with Steel Core | Textured | Nonreplaceable | 0000000 | 00000 |
| 2 5/8 lbs. | 2 1/8" | Soft | Fluorescent Orange | 14 1/4" | Polyurethane Rubber with Steel Core | Textured | Nonreplaceable | 0000000 | 00000 |
| 3 1/4 lbs. | 2 1/2" | Soft | Fluorescent Orange | 15 1/4" | Polyurethane Rubber with Steel Core | Textured | Nonreplaceable | 0000000 | 00000 |
| 5 lbs. | 2 7/8" | Soft | Fluorescent Orange | 19 3/4" | Polyurethane Rubber with Steel Core | Textured | Nonreplaceable | 0000000 | 000000 |
Brass Face | |||||||||
| 1 1/2 lbs. | 1 3/4" × 1 1/4" | __ | __ | 13" | Polyurethane Rubber with Steel Core | Textured | Nonreplaceable | 0000000 | 00000 |
Replaceable-Face Dead Blow Mallets
The replaceable faces can be changed out when worn. These mallets have a head loaded with metal shot for added weight and a controlled impact with minimal rebound. Use them to drive chisels and strike work without damaging its surface. The polyurethane rubber faces resist oils and solvents and won't crack under high impact; they're often used on plastic, wood, and sheet metal. To avoid marring when tapping or striking, choose a face that's softer than your workpiece. Lighter weight mallets are good for tapping work into place and driving a chisel to make small cuts. Use heavier weight mallets when assembling joints, dislodging stuck parts, and making aggressive cuts with a chisel. Longer mallets allow for more powerful swings. The handle has a ribbed grip for slip resistance.
Medium faces have a hardness that's suitable for most general purpose applications. Extra-hard faces have a hardness similar to that of a hard hat.
Hickory handles resist vibration. Steel handles are stronger than hickory handles but have less vibration resistance.
Face Thread | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Head Wt. | Face Dia. | Face Lg. | Face Wd. | Face Hardness Rating (Face Color) | Size | Type | Overall Lg. | Head Material | Handle Material | Grip Style | Handle Replaceable | Each | |
Rectangular Press-Fit Polyurethane Rubber Face | |||||||||||||
| 1 lbs. | __ | 1 3/16" | 1 9/16" | Medium (Yellow) | __ | __ | 11 3/4" | Steel | Steel | Ribbed | Nonreplaceable | 0000000 | 000000 |
Round Screw-In Polyurethane Rubber Face | |||||||||||||
| 10 oz. | 1" | __ | __ | Medium (Green) × Extra Hard (Black) | 1/4"-20 | UNC | 11" | Aluminum | Hickory | Ribbed | Replaceable | 0000000 | 00000 |
| 14 oz. | 1" | __ | __ | Medium (Green) × Extra Hard (Black) | 1/4"-20 | UNC | 11" | Iron | Hickory | Ribbed | Replaceable | 0000000 | 00000 |
| 14 oz. | 1 1/4" | __ | __ | Medium (Green) × Extra Hard (Black) | 5/16"-18 | UNC | 12" | Aluminum | Hickory | Ribbed | Replaceable | 0000000 | 00000 |
| 1 3/8 lbs. | 1 1/4" | __ | __ | Medium (Green) × Extra Hard (Black) | 5/16"-18 | UNC | 12" | Iron | Hickory | Ribbed | Replaceable | 0000000 | 00000 |
| 1 3/8 lbs. | 1 1/2" | __ | __ | Medium (Green) × Extra Hard (Black) | 5/16"-18 | UNC | 13" | Aluminum | Hickory | Ribbed | Replaceable | 0000000 | 00000 |
| 1 7/8 lbs. | 1 1/2" | __ | __ | Medium (Green) × Extra Hard (Black) | 5/16"-18 | UNC | 13" | Iron | Hickory | Ribbed | Replaceable | 0000000 | 00000 |
| 2 3/8 lbs. | 2" | __ | __ | Medium (Green) × Extra Hard (Black) | 3/8"-16 | UNC | 15" | Aluminum | Hickory | Ribbed | Replaceable | 0000000 | 000000 |
| 3 1/2 lbs. | 2" | __ | __ | Medium (Green) × Extra Hard (Black) | 3/8"-16 | UNC | 15" | Iron | Hickory | Ribbed | Replaceable | 0000000 | 000000 |
| 4 1/8 lbs. | 2 1/2" | __ | __ | Medium (Green) × Extra Hard (Black) | 7/16"-14 | UNC | 17" | Aluminum | Hickory | Ribbed | Replaceable | 0000000 | 000000 |
| 6 1/2 lbs. | 2 1/2" | __ | __ | Medium (Green) × Extra Hard (Black) | 7/16"-14 | UNC | 17" | Iron | Hickory | Ribbed | Replaceable | 0000000 | 000000 |
Soft faces have a hardness similar to that of a tire tread.
Medium faces have a hardness that's suitable for most general purpose applications.
Hard faces have a hardness similar to that of a bowling ball.
Extra-hard faces have a hardness similar to that of a hard hat.
Face Thread | Soft (Orange) | Medium (Green) | Hard (Red) | Extra Hard (Black) | ||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Face Dia. | Size | Type | Each | Each | Each | Each | ||||
| 1" | 1/4"-20 | UNC | 0000000 | 000000 | 0000000 | 000000 | 0000000 | 000000 | 0000000 | 000000 |
| 1 1/4" | 5/16"-18 | UNC | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 00000 |
| 1 1/2" | 5/16"-18 | UNC | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 00000 |
| 2" | 3/8"-16 | UNC | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 00000 |
| 2 1/2" | 7/16"-14 | UNC | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 00000 |
Medium-hard faces have a hardness similar to that of a plastic cutting board.
Medium Hard (Off-White) | |||
|---|---|---|---|
| Face Lg. | Face Wd. | Each | |
| 1 3/16" | 1 9/16" | 0000000 | 00000 |
High-Visibility Replaceable-Face Dead Blow Mallets
Change the faces out when worn rather than replacing the entire tool. A fluorescent orange color makes these mallets easy to see. All have a head loaded with metal shot for added weight and a controlled impact with minimal rebound. Use them to drive chisels and strike work without damaging its surface. Often used on plastic, wood, and sheet metal, the polyurethane rubber faces resist oils and solvents and won't crack under high impact. The medium-hard face has a hardness similar to that of a plastic cutting board; the extra-hard face has a hardness similar to that of a hard hat. Use a face that's softer than your workpiece to avoid marring. Lighter weight mallets are good for tapping work into place and driving a chisel to make small cuts. Choose heavier weight mallets for assembling joints, dislodging stuck parts, and making aggressive cuts with a chisel. Longer mallets allow for more powerful swings. A textured grip provides slip resistance.
Face | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Head Wt. | Face Dia. | Face Hardness Rating (Face Color) | Pipe Size | Thread Type | Overall Lg. | Handle Material | Grip Style | Handle Replaceable | Each | |
Polyurethane Rubber Face | ||||||||||
| 12 oz. | 1 3/8" | Medium Hard (Red) × Extra Hard (Black) | 3/4 | NPT | 10" | Polyurethane Rubber with Steel Core | Textured | Nonreplaceable | 0000000 | 000000 |
| 1 1/2 lbs. | 1 3/4" | Medium Hard (Red) × Extra Hard (Black) | 1 | NPT | 11" | Polyurethane Rubber with Steel Core | Textured | Nonreplaceable | 0000000 | 00000 |
| 2 lbs. | 1 7/8" | Medium Hard (Red) × Extra Hard (Black) | 1 | NPT | 11 3/4" | Polyurethane Rubber with Steel Core | Textured | Nonreplaceable | 0000000 | 00000 |
| 3 lbs. | 2 1/2" | Medium Hard (Red) × Extra Hard (Black) | 1 1/4 | NPT | 13 3/4" | Polyurethane Rubber with Steel Core | Textured | Nonreplaceable | 0000000 | 00000 |
| 4 1/2 lbs. | 2 7/8" | Medium Hard (Red) × Extra Hard (Black) | 1 1/2 | NPT | 14 3/4" | Polyurethane Rubber with Steel Core | Textured | Nonreplaceable | 0000000 | 000000 |
| 7 lbs. | 2 7/8" | Medium Hard (Red) × Extra Hard (Black) | 1 1/2 | NPT | 19 1/4" | Polyurethane Rubber with Steel Core | Textured | Nonreplaceable | 0000000 | 000000 |
Extra-soft faces have a hardness similar to that of a pencil eraser.
Soft faces have a hardness similar to that of a tire tread.
Medium faces have a hardness that's suitable for most general purpose applications.
Medium-hard faces have a hardness similar to that of a plastic cutting board.
Hard faces have a hardness similar to that of a bowling ball.
Extra-hard faces have a hardness similar to that of a hard hat.
Face | ||||
|---|---|---|---|---|
| Face Dia. | Pipe Size | Thread Type | Each | |
Extra Soft (Clear) | ||||
| 1 3/8" | 3/4 | NPT | 00000000 | 000000 |
| 1 3/4" | 1 | NPT | 00000000 | 00000 |
| 1 7/8" | 1 | NPT | 00000000 | 00000 |
| 2 1/2" | 1 1/4 | NPT | 00000000 | 00000 |
| 2 7/8" | 1 1/2 | NPT | 00000000 | 00000 |
Soft (Blue) | ||||
| 1 3/8" | 3/4 | NPT | 00000000 | 00000 |
| 1 3/4" | 1 | NPT | 00000000 | 00000 |
| 1 7/8" | 1 | NPT | 00000000 | 00000 |
| 2 1/2" | 1 1/4 | NPT | 00000000 | 00000 |
| 2 7/8" | 1 1/2 | NPT | 00000000 | 00000 |
Medium (Green) | ||||
| 1 3/8" | 3/4 | NPT | 00000000 | 00000 |
| 1 3/4" | 1 | NPT | 00000000 | 00000 |
| 1 7/8" | 1 | NPT | 00000000 | 00000 |
| 2 1/2" | 1 1/4 | NPT | 00000000 | 00000 |
| 2 7/8" | 1 1/2 | NPT | 00000000 | 00000 |
Medium Hard (Red) | ||||
| 1 3/8" | 3/4 | NPT | 00000000 | 00000 |
| 1 3/4" | 1 | NPT | 00000000 | 00000 |
| 1 7/8" | 1 | NPT | 00000000 | 00000 |
| 2 1/2" | 1 1/4 | NPT | 00000000 | 00000 |
| 2 7/8" | 1 1/2 | NPT | 00000000 | 00000 |
Hard (Amber) | ||||
| 1 3/8" | 3/4 | NPT | 00000000 | 00000 |
| 1 3/4" | 1 | NPT | 00000000 | 00000 |
| 1 7/8" | 1 | NPT | 00000000 | 00000 |
| 2 1/2" | 1 1/4 | NPT | 00000000 | 00000 |
| 2 7/8" | 1 1/2 | NPT | 00000000 | 00000 |
Extra Hard (Black) | ||||
| 1 3/8" | 3/4 | NPT | 00000000 | 00000 |
| 1 3/4" | 1 | NPT | 00000000 | 00000 |
| 1 7/8" | 1 | NPT | 00000000 | 00000 |
| 2 1/2" | 1 1/4 | NPT | 00000000 | 00000 |
| 2 7/8" | 1 1/2 | NPT | 00000000 | 00000 |
Mallets
Drive chisels and strike work without damaging its surface. To avoid marring, choose a mallet with faces that are softer than your workpiece. Lighter weight mallets are good for tapping work into place and driving a chisel to make small cuts. Use heavier weight mallets when assembling joints, dislodging stuck parts, and making aggressive cuts with a chisel. Longer mallets allow for more powerful swings.
Rubber and plastic faces are softer than metal faces, so they're good for striking plastic, wood, and sheet metal. All have a face hardness rating for comparing their hardness with other rubber and plastic faces. Soft faces have a hardness similar to that of a tire tread. Medium-soft faces have a hardness similar to that of a shoe heel. White rubber faces are nonmarking.
Hickory handles resist vibration. Fiberglass handles combine the strength of steel with the vibration resistance of wood.
Textured and ribbed grips provide slip resistance.
Black Face | White Face | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Head Wt., lbs. | Face Dia. | Face Hardness Rating | Overall Lg. | Grip Style | Handle Replaceable | Each | Each | |||
Fiberglass Handle | ||||||||||
| A | 1 | 1 3/4" | Soft | 12 1/2" | Textured | Replaceable | 000000 | 000000 | 000000 | 00 |
| A | 2 | 2 3/8" | Soft | 15 3/4" | Textured | Replaceable | 000000 | 00000 | 000000 | 00 |
| B | 1 | 2" | Medium Soft | 13" | Textured | Nonreplaceable | 000000 | 00 | 000000 | 000000 |
Black Face | White Face | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Head Wt. | Face Dia. | Face Hardness Rating | Overall Lg. | Grip Style | Handle Replaceable | Each | Each | |||
Hickory Handle | ||||||||||
| C | 7 oz. | 1 5/8" | Soft | 12 1/2" | Plain | Nonreplaceable | 000000 | 000000 | 000000 | 000000 |
| C | 13 oz. | 2 1/4" | Soft | 12 1/2" | Plain | Nonreplaceable | 000000 | 00000 | 000000 | 00000 |
| C | 1 5/8 lbs. | 2 1/4" | Soft | 14" | Plain | Nonreplaceable | 000000 | 00000 | 000000 | 00000 |
| C | 1 7/8 lbs. | 2 1/2" | Soft | 15 1/2" | Plain | Nonreplaceable | 000000 | 00000 | 000000 | 00000 |
| C | 2 1/4 lbs. | 2 1/2" | Soft | 16" | Plain | Nonreplaceable | 000000 | 00000 | 000000 | 00000 |
| C | 3 5/8 lbs. | 3 1/8" | Soft | 16 1/2" | Plain | Nonreplaceable | 000000 | 00000 | 000000 | 00000 |
Fiberglass Handle | ||||||||||
| B | 13 oz. | 2 1/8" | Soft | 12 1/2" | Plain | Nonreplaceable | 000000 | 00 | 0000000 | 00000 |
| B | 1 7/8 lbs. | 2 1/2" | Soft | 15 1/2" | Plain | Nonreplaceable | 000000 | 00 | 0000000 | 00000 |
| B | 2 1/4 lbs. | 2 1/2" | Soft | 16" | Plain | Nonreplaceable | 0000000 | 00000 | 000000 | 00 |
| B | 3 5/8 lbs. | 3 1/8" | Soft | 16 1/2" | Plain | Nonreplaceable | 0000000 | 00000 | 000000 | 00 |
Replaceable-Face Mallets
Replace faces when they become worn rather than replacing the entire tool. These mallets are suitable for driving chisels and striking work without damaging its surface. Choose a mallet with a face that's softer than your workpiece to avoid marring it when tapping or striking. Lighter weight mallets are good for tapping work into place and driving a chisel to make small cuts. Use heavier weight mallets when assembling joints, dislodging stuck parts, and making aggressive cuts with a chisel. Longer mallets allow for more powerful swings.
Rubber and plastic faces are softer than metal faces, so they're good for striking plastic, wood, and sheet metal. All have a face hardness rating for comparing their hardness with other rubber and plastic faces. Hard faces have a hardness similar to that of a bowling ball. Extra-hard faces have a hardness similar to that of a hard hat. White rubber faces are nonmarking.
Hickory and ash handles resist vibration.
Dead Blow Sledge Hammers
These hammers have a head loaded with metal shot for added weight and a controlled impact with minimal rebound. A fluorescent orange color makes them easy to see. Use them to demolish material, form metal, and drive punches, chisels, and masonry drills. All have a long handle and heavy head to deliver a powerful strike. Made from polyurethane rubber, the faces resist oil and solvents and won't crack under high impact. The hardness of the faces is similar to that of a tire tread.
| Head Wt., lbs. | Face Dia. | Face Hardness Rating | Face Color | Overall Lg. | Handle Material | Grip Style | Handle Color | Handle Replaceable | Each | |
Polyurethane Rubber Face | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| 10 1/2 | 3 3/8" | Soft | Fluorescent Orange | 30" | Polyurethane Rubber with Steel Core | Textured | Fluorescent Orange | Nonreplaceable | 0000000 | 0000000 |
| 11 1/2 | 3 3/8" | Soft | Fluorescent Orange | 36 1/4" | Polyurethane Rubber with Steel Core | Textured | Fluorescent Orange | Nonreplaceable | 0000000 | 000000 |
Screw-In Hammer Faces
These faces have screw threads to attach to the head of your hammer or mallet. Replace existing faces or switch to a face with a different hardness.
Rubber and plastic faces are softer than metal faces, so they're good for sheet metal work. All have a face hardness rating for comparing their hardness with other rubber and plastic faces.
Extra-soft faces have a hardness similar to that of a pencil eraser.
Soft faces have a hardness similar to that of a tire tread.
Medium faces have a hardness that's suitable for most general purpose applications.
Medium-hard faces have a hardness similar to that of a plastic cutting board.
Hard faces have a hardness similar to that of a bowling ball.
Extra-hard faces have a hardness similar to that of a hard hat.
Face | ||||||
|---|---|---|---|---|---|---|
| Face Dia. | Thread Size | Pipe Size | Thread Type | Face Color | Each | |
Extra Soft | ||||||
| 1 3/8" | __ | 3/4 | NPT | Clear | 00000000 | 000000 |
| 1 3/4" | __ | 1 | NPT | Clear | 00000000 | 00000 |
| 1 7/8" | __ | 1 | NPT | Clear | 00000000 | 00000 |
| 2 1/2" | __ | 1 1/4 | NPT | Clear | 00000000 | 00000 |
| 2 7/8" | __ | 1 1/2 | NPT | Clear | 00000000 | 00000 |
Soft | ||||||
| 1" | 1/4"-20 | __ | UNC | Orange | 0000000 | 00000 |
| 1 1/4" | 5/16"-18 | __ | UNC | Orange | 0000000 | 00000 |
| 1 3/8" | __ | 3/4 | NPT | Blue | 00000000 | 00000 |
| 1 1/2" | 5/16"-18 | __ | UNC | Orange | 0000000 | 00000 |
| 1 3/4" | __ | 1 | NPT | Blue | 00000000 | 00000 |
| 1 7/8" | __ | 1 | NPT | Blue | 00000000 | 00000 |
| 2" | 3/8"-16 | __ | UNC | Orange | 0000000 | 00000 |
| 2 1/2" | __ | 1 1/4 | NPT | Blue | 00000000 | 00000 |
| 2 1/2" | 7/16"-14 | __ | UNC | Orange | 0000000 | 00000 |
| 2 7/8" | __ | 1 1/2 | NPT | Blue | 00000000 | 00000 |
| 3" | 1/2"-13 | __ | UNC | Orange | 0000000 | 00000 |
Medium | ||||||
| 1" | 1/4"-20 | __ | UNC | Green | 0000000 | 00000 |
| 1 1/4" | 5/16"-18 | __ | UNC | Green | 0000000 | 00000 |
| 1 3/8" | __ | 3/4 | NPT | Green | 00000000 | 00000 |
| 1 1/2" | 5/16"-18 | __ | UNC | Green | 0000000 | 00000 |
| 1 3/4" | __ | 1 | NPT | Green | 00000000 | 00000 |
| 1 7/8" | __ | 1 | NPT | Green | 00000000 | 00000 |
| 2" | 3/8"-16 | __ | UNC | Green | 0000000 | 00000 |
| 2 1/2" | __ | 1 1/4 | NPT | Green | 00000000 | 00000 |
| 2 1/2" | 7/16"-14 | __ | UNC | Green | 0000000 | 00000 |
| 2 7/8" | __ | 1 1/2 | NPT | Green | 00000000 | 00000 |
| 3" | 1/2"-13 | __ | UNC | Green | 0000000 | 00000 |
Medium Hard | ||||||
| 1 3/8" | __ | 3/4 | NPT | Red | 00000000 | 00000 |
| 1 3/4" | __ | 1 | NPT | Red | 00000000 | 00000 |
| 1 7/8" | __ | 1 | NPT | Red | 00000000 | 00000 |
| 2 1/2" | __ | 1 1/4 | NPT | Red | 00000000 | 00000 |
| 2 7/8" | __ | 1 1/2 | NPT | Red | 00000000 | 00000 |
Hard | ||||||
| 1" | 1/4"-20 | __ | UNC | Red | 0000000 | 00000 |
| 1 1/4" | 5/16"-18 | __ | UNC | Red | 0000000 | 00000 |
| 1 3/8" | __ | 3/4 | NPT | Amber | 00000000 | 00000 |
| 1 1/2" | 5/16"-18 | __ | UNC | Red | 0000000 | 00000 |
| 1 3/4" | __ | 1 | NPT | Amber | 00000000 | 00000 |
| 1 7/8" | __ | 1 | NPT | Amber | 00000000 | 00000 |
| 2" | 3/8"-16 | __ | UNC | Red | 0000000 | 00000 |
| 2 1/2" | __ | 1 1/4 | NPT | Amber | 00000000 | 00000 |
| 2 1/2" | 7/16"-14 | __ | UNC | Red | 0000000 | 00000 |
| 2 7/8" | __ | 1 1/2 | NPT | Amber | 00000000 | 00000 |
| 3" | 1/2"-13 | __ | UNC | Red | 0000000 | 00000 |
Extra Hard | ||||||
| 1" | 1/4"-20 | __ | UNC | Black | 0000000 | 00000 |
| 1 1/4" | 5/16"-18 | __ | UNC | Black | 0000000 | 00000 |
| 1 3/8" | __ | 3/4 | NPT | Black | 00000000 | 00000 |
| 1 1/2" | 5/16"-18 | __ | UNC | Black | 0000000 | 00000 |
| 1 3/4" | __ | 1 | NPT | Black | 00000000 | 00000 |
| 1 7/8" | __ | 1 | NPT | Black | 00000000 | 00000 |
| 2" | 3/8"-16 | __ | UNC | Black | 0000000 | 00000 |
| 2 1/2" | __ | 1 1/4 | NPT | Black | 00000000 | 00000 |
| 2 1/2" | 7/16"-14 | __ | UNC | Black | 0000000 | 00000 |
| 2 7/8" | __ | 1 1/2 | NPT | Black | 00000000 | 00000 |
| 3" | 1/2"-13 | __ | UNC | Black | 0000000 | 00000 |
Hammer Faces
Replace faces on a compatible hammer or mallet head or switch to a face with a different hardness.
Clamping-head faces are for use in heads with two pieces that clamp together to hold the face in place. Press-fit faces can be used in clamping heads and pressed into hammer heads that have been drilled out.
Rubber and plastic faces are softer than metal faces, so they're good for sheet metal work. All have a face hardness rating for comparing their hardness with other rubber and plastic faces.
Medium-hard faces have a hardness similar to that of a plastic cutting board.
Hard faces have a hardness similar to that of a bowling ball.
Extra-hard faces have a hardness similar to that of a hard hat.
White rubber faces won't leave marks on your work.
