Twist these bumpers into a threaded hole. Often used as feet, spacers, and vibration dampers, they absorb shock to prevent damage to equipment and surfaces.

These bumpers withstand temperatures up to 300° F, which is twice as high as our other load rated bumpers. Use them in applications that require specific load capacities. All are reinforced with a base plate for strength. Often used as feet, spacers, and vibration dampers, these bumpers absorb shock to prevent damage to equipment and surfaces. They're also good for starting and stopping motion on automated machines and conveyors. Twist them into a threaded hole.

Install these bumpers with screws. Often used as feet, spacers, and vibration dampers, they absorb shock to prevent damage to equipment and surfaces.

These bumpers are at a 90° angle to protect corners on equipment, walls, and docks from damage caused by carts, vehicles, and other moving objects. Install them with screws.

The stem on these bumpers compresses to fit into tight holes. Push the stem into a hole for quick installation. These bumpers are commonly used as feet on instruments and bench-top equipment to keep them from sliding. They're also good as spacers between sheets of material. Also known as stem and grommet bumpers.

Mount these bumpers on a threaded stud. All are reinforced with a steel core or base plate for strength. Often used as feet, spacers, and vibration dampers, they absorb shock to prevent damage to equipment and surfaces. They're also good for starting and stopping motion on automated machines.

These bumpers withstand temperatures up to 300° F, which is at least twice as high as our other load rated bumpers. Use them in applications that require specific load capacities. All are reinforced with a base plate for strength. Often used as feet, spacers, and vibration dampers, these bumpers absorb shock to prevent damage to equipment and surfaces. They're also good for starting and stopping motion on automated machines and conveyors. Mount them on a threaded stud.

Make bumpers the size and shape you need. Use them as feet and spacers on instruments and small appliances to limit sliding, vibration, and noise. Press them into place with the adhesive backing.

Keep bumpers of various shapes, materials, and mounting styles on hand to solve whatever problems arise.

Install with a few taps of a hammer. In addition to protecting soft materials such as wood, fiberboard, and plastic, these bumpers are commonly used on table and chair legs to safeguard floors.

Simply adhere these silencers to the door frame—no need for an installation hole. Doors close firmly yet quietly with these silencers. They also eliminate the rattling of doors against their frames.

The half-dome shape won't catch mops and scrubbers. Install these stops in wood or concrete floors.

Designed to mount at the point of contact between a door handle and the wall, these stops prevent handles from damaging walls when doors swing open.

Simply screw these bumpers into baseboards with the attached self-tapping wood screw to prevent doors from damaging walls.

Protect door knobs and other hardware from damage caused by carts, dollies, and other equipment.

Cut the thin layer of rubber in the center of these grommets to create custom IDs to securely hold and protect wire, cable, and cords. Push these grommets into place. They turn rough-edged and uneven holes into smooth, insulated holes. Commonly used in metal panels, they also damp vibration. Also known as webbed grommets.

Keep grommets of various sizes on hand to solve whatever problems arise.

Create a tight seal around wire, cable, and cords with these grommets to keep out dust, debris, and moisture.

Create a sanitary seal on through-wall piping, tubing, and cables in food-, cosmetic-, and pharmaceutical-processing areas.

The two‐piece design makes it easy to install and seal these grommets around wire, cable, and cords that are already in place. Use them to keep out dust, debris, and moisture.

The raised bulb adds cushioning to absorb more impact than other surface guards to protect walls and other flat surfaces from impact.

Vibrant colors create a visual alert to draw attention to equipment and obstructions. These guards protect corners on walls, posts, shelving, and other surfaces from damage.

The guards in this system have a metal core for added strength and stability. Combine corner guards and surface guards to create a system that protects walls and equipment from impact and wear. Often used in warehouse and manufacturing areas, these systems protect against damage from carts and vehicles.

Made of rubber, this trim resists abrasion better than plastic trim. Often used on panels, boards, signs, and mirrors, it protects edges from impact.

Sample multiple sizes and styles of rubber trim.

A metal core adds strength and stability, making this trim more durable than other high-temperature rubber trim. It withstands temperatures up to 400° F, which is generally twice as high as our standard rubber trim. Use it to protect the edges of panels, boards, and signs from impact. Made of rubber, it resists abrasion better than plastic trim.

With a surface resistivity of 1.4 ohms, this trim safeguards equipment from static electricity by diverting electrostatic charges quickly. Made of rubber, it resists abrasion better than plastic trim. Use it to protect the edges of electronics equipment and circuit boards from impact.

Commonly used on stair rails, vehicle panels, and heavy equipment, this durable rubber film is tear resistant. Use it to protect metal, wood, plastic, composite, and painted surfaces from damage.

Place a plug into an opening and tighten the wing nut—the sides expand to create a seal in holes of varying diameters.

Good for electroplating, paint baking, and powder-coating applications, these plugs withstand temperatures up to 570° F. All are tapered to fit a range of hole diameters.

Place a plug into an opening and tighten the wing nut—the sides expand to create a seal in holes of varying diameters. Good for paint baking and powder-coating applications, these plugs withstand temperatures up to 450° F.

With a compressible flanged top, these plugs are designed to seal the ends of copper tubing often used in water supply lines, refrigerant lines, and HVAC compressors. All are sized to fit standard copper tube dimensions.

Designed with a flange, these plugs protect countersunk holes during anodizing, electroplating, paint baking, and powder-coating applications. All withstand temperatures up to 600° F. Use the smaller end of the plug to pull the larger end into a through hole to form a tight seal.

These plugs have excellent chemical resistance for masking parts during chemical finishing applications such as plating and anodizing. Use the smaller end of the plug to pull the larger end into a through hole to form a tight seal.

These plugs withstand temperatures up to 600° F to protect internally threaded NPT connections from contaminants during electropainting, paint baking, and powder coating applications.

The large domed head extends beyond the diameter of your pipe, rod, or tubing for added protection.

Made of silicone, these caps withstand temperatures of 450° F for electroplating, paint-baking, and powder-coating applications. All of these flexible caps are tapered to fit a variety of unthreaded and threaded objects.

Tug on the pull tabs to stretch these caps onto the tips of bottles, beakers, flasks, and cylinders, creating an airtight seal.

These mounts withstand exposure to weather and resist oil, antifreeze, and other petroleum-based fluids.

Specifically designed for light vertical loads, these mounts buckle to protect lightweight equipment such as small fans and pumps from vibration.

Designed for tight spaces such as inside machinery, these mounts fit into a cutout, so they so they have a low top profile.

Isolate vibration and noise from oscillating equipment like fans and tumblers that create horizontal (shear) force.

Connect these mounts to your air supply for vibration and shock isolation in compression load applications.

An interlocking steel frame in these mounts prevents collapse, even if the rubber fails.

Made of nitrile rubber, these mounts are oil resistant for use in compression load applications with punch presses, milling machines, grinders, and air compressors.

The polyurethane base on these mounts resists solvents, gasoline, and oil, while the metal plate sustains heavy loads.

All-stainless steel construction stands up to water and chemicals and won't rust or corrode.

Thread these mounts into machinery to level them on uneven floors in sanitary environments such as food-processing areas.

A two-piece design requires less clearance than one-piece mounts and simplifies installation—raise your machine just enough to slide the base underneath, then insert the stud from above.

A two-piece design simplifies installation and requires less clearance than one-piece mounts.

Made of neoprene rubber, these feet are a good choice for use in oily environments.

Press these grommets into a hole to add cushion on both sides.

Ribbed grommets are more flexible than our smooth vibration-damping grommets, so they're easier to install.

In addition to having a wider temperature range than our other vibration-damping bushings, these have excellent weather resistance.

In addition to having a wider temperature range than our other ribbed vibration-damping bushings, these have excellent weather resistance.

Use these in place of normal washers to damp vibration and cushion your joint.

These bumpers are fiber-reinforced for more impact resistance than vehicle-mount bumpers.

For the heaviest loads, these springs have more than double the load capacity of High-Load Fastener-Mount Compression Springs. Secure by inserting a fastener through the hole at the base.

Flanges on the ends of these springs provide a flat mounting surface.

Isolate vibration and absorb shock from moving equipment, even with changing loads. Also for leveling and lifting, use compressed air to adjust air springs to the height and force required for your application.

Turn the cam handle to expand the seal, then snap the handle down to hold it in place.