Hammer Type Hammer Type |
|---|
 |  |
| Welding | Sheet Metal Forming |
Overall Length Overall Length |
|---|
|
|
|
Handle Replaceable Handle Replaceable |
|---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement)  |
|---|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
|---|
|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
|---|
|
Material Material |
|---|
|
For Tool Type For Tool Type |
|---|
|
Compatible Tools Compatible Tools |
|---|
Needle Material Needle Material |
|---|
|
About Hammers
More
Welding Hammers
Chip and scrape away weld spatter, paint, and rust.
Hickory handles resist vibration. Steel handles are stronger than wooden handles but have less vibration resistance.
Wire coil grips are flexible and dissipate heat. Textured grips provide slip resistance.
Wire brush can be replaced when worn.
Hammers | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
Head | Replacement Handles | |||||||||
| Wt. | Style | Blade Wd. | Overall Lg. | Head Material | Features | Each | Each | |||
Hickory Handle with Plain Grip | ||||||||||
| A | 10 oz. | Chisel/Pick | 1" | 10 1/2" | Steel | __ | 0000000 | 000000 | 000000 | 00 |
| B | 1 lbs. | Chisel/Pick | 1 1/4" | 12 1/2" | Steel | __ | 0000000 | 00000 | 0000000 | 000000 |
| C | 1 lbs. | Chisel/Pick | 1 1/4" | 12 1/2" | Steel | __ | 0000000 | 00000 | 0000000 | 00000 |
Steel Handle with Wire Coil Grip | ||||||||||
| D | 6 oz. | Chisel | 1" | 11 1/2" | Steel | Wire Brush | 0000000 | 00000 | 000000 | 00 |
| E | 10 oz. | Chisel | 1" | 10 1/2" | Steel | __ | 0000000 | 00000 | 000000 | 00 |
| E | 9 oz. | Chisel/Pick | 1" | 10 1/2" | Steel | __ | 0000000 | 00000 | 000000 | 00 |
| F | 7 oz. | Chisel/Pick | 1" | 10 1/2" | Steel | __ | 0000000 | 00000 | 000000 | 00 |
| G | 12 oz. | Chisel/Pick | 1" | 11" | Steel | __ | 0000000 | 0000 | 000000 | 00 |
Steel Handle with Textured Grip | ||||||||||
| H | 14 oz. | Chisel/Pick | 15/16" | 11" | Steel | __ | 0000000 | 00000 | 000000 | 00 |
| Replacement Steel Brush | 0000000 | Each | 00000 |
Sheet Metal Forming Hammers
Also known as body and fender tools, these hammers are excellent for forming and repairing dents in sheet metal components.
Hickory handles resist vibration.
Place against the face of your workpiece and strike with a hammer. The blow will transfer to the workpiece without damaging the finish. Also known as dinging spoons, these tools are often used to smooth ridges and dings in sheet metal.
Style B have large, slightly curved faces for efficient finishing and shaping of sheet metal edges.
Place on the back side of your workpiece to act as a support when you strike it. Also known as dolly blocks.
A long handle lets you access hard-to-reach spots. Place the block on the back side of your workpiece to act as a support when you strike it. Also known as dolly blocks.
Block | |||||||
|---|---|---|---|---|---|---|---|
| Lg. | Wd. | Ht. | Overall Lg. | Wt., lbs. | Material | Each | |
| 3" | 2 1/2" | 1" | 14" | 4 1/4 | Steel | 0000000 | 000000 |
Nonsparking 0.495" Octagonal Shank Chisels for Needle Scalers
Made of aluminum-bronze that is Factory Mutual approved, this chisel inhibits sparking and is nonmagnetic and corrosion resistant. It satisfies OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present. Use with Air-Powered Needle Scalers/Chiseling Hammers.
Warning: Do not use this tool in direct contact with acetylene.
Shank | |||||||
|---|---|---|---|---|---|---|---|
| Blade Style | Blade Wd. | O'all Lg. | Type | Size | Lg. | Each | |
| Flat | 2" | 7 3/4" | Octagon | 0.495" | 5/8" | 0000000 | 000000 |
0.495" Octagonal Shank Chisels for Needle Scalers
Use with Air-Powered Needle Scalers/Chiseling Hammers.
For technical drawings and 3-D models, click on a part number.
Shank | ||||||||
|---|---|---|---|---|---|---|---|---|
| Blade Wd. | O'all Lg. | Type | Size | Lg. | Material | Compatible Tools | Each | |
Flat Blade | ||||||||
| 3/4" | 7" | Octagon | 0.495" | 51/64" | Steel | Jet JAT-801, Chicago Monarch CMC-1B, Chicago Pneumatic CP 0456, Nitto Kohki CH-24 | 0000000 | 000000 |
| 3/4" | 7" | Octagon | 0.495" | 1 5/32" | Steel | Ingersoll-Rand 172LNA1, Ingersoll-Rand 182LNA1 | 0000000 | 00000 |
| 1 3/8" | 7" | Octagon | 0.495" | 51/64" | Steel | Jet JAT-801, Chicago Monarch CMC-1B, Chicago Pneumatic CP 0456, Nitto Kohki CH-24 | 0000000 | 00000 |
| 1 3/8" | 7" | Octagon | 0.495" | 1 5/32" | Steel | Ingersoll-Rand 172LNA1, Ingersoll-Rand 182LNA1 | 0000000 | 00000 |
| 1 3/8" | 12" | Octagon | 0.495" | 51/64" | Steel | Jet JAT-801, Chicago Monarch CMC-1B, Chicago Pneumatic CP 0456, Nitto Kohki CH-24 | 0000000 | 00000 |
| 1 3/8" | 12" | Octagon | 0.495" | 1 5/32" | Steel | Ingersoll-Rand 172LNA1, Ingersoll-Rand 182LNA1 | 0000000 | 00000 |
| 2" | 7" | Octagon | 0.495" | 51/64" | Steel | Jet JAT-801, Chicago Monarch CMC-1B, Chicago Pneumatic CP 0456, Nitto Kohki CH-24 | 0000000 | 00000 |
| 3" | 7 1/2" | Octagon | 0.495" | 51/64" | Steel | Jet JAT-801, Chicago Monarch CMC-1B, Chicago Pneumatic CP 0456, Nitto Kohki CH-24 | 0000000 | 00000 |
Offset Blade | ||||||||
| 1 3/8" | 7" | Octagon | 0.495" | 51/64" | Steel | Jet JAT-801, Chicago Monarch CMC-1B, Chicago Pneumatic CP 0456, Nitto Kohki CH-24 | 0000000 | 00000 |
| 1 3/8" | 7" | Octagon | 0.495" | 1 5/32" | Steel | Ingersoll-Rand 172LNA1, Ingersoll-Rand 182LNA1 | 0000000 | 00000 |
| 1 3/8" | 18" | Octagon | 0.495" | 17/32" | Steel | Ingersoll-Rand 182LNA1, Nitto Kohki CH-24 | 0000000 | 00000 |
0.373" Round Shank Chisels for Needle Scalers
Shank | ||||||||
|---|---|---|---|---|---|---|---|---|
| Blade Wd. | O'all Lg. | Type | Size | Lg. | Material | Compatible Tools | Each | |
Flat Blade | ||||||||
| 3/4" | 7" | Round | 0.373" | 13/16" | Steel | Chicago Pneumatic 9356, Cleco BI-C, Ingersoll-Rand 125, Jet JSG-9121, Universal Tool 8630 | 00000000 | 000000 |
| 1 3/8" | 7" | Round | 0.373" | 13/16" | Steel | Chicago Pneumatic 9356, Cleco BI-C, Ingersoll-Rand 125, Jet JSG-9121, Universal Tool 8630 | 00000000 | 00000 |
| 1 3/8" | 12" | Round | 0.373" | 13/16" | Steel | Chicago Pneumatic 9356, Cleco BI-C, Ingersoll-Rand 125, Jet JSG-9121, Universal Tool 8630 | 00000000 | 00000 |
| 2" | 7" | Round | 0.373" | 13/16" | Steel | Chicago Pneumatic 9356, Cleco BI-C, Ingersoll-Rand 125, Jet JSG-9121, Universal Tool 8630 | 00000000 | 00000 |
| 3" | 7 1/2" | Round | 0.373" | 13/16" | Steel | Chicago Pneumatic 9356, Cleco BI-C, Ingersoll-Rand 125, Jet JSG-9121, Universal Tool 8630 | 00000000 | 00000 |
Offset Blade | ||||||||
| 1 3/8" | 7" | Round | 0.373" | 13/16" | Steel | Chicago Pneumatic 9356, Cleco BI-C, Ingersoll-Rand 125, Jet JSG-9121, Universal Tool 8630 | 00000000 | 00000 |
7/16" Octagonal Shank Chisels for Quick-Change Chiseling Hammers
Use with air-powered hammers.
For technical drawings and 3-D models, click on a part number.
Shank | ||||||||
|---|---|---|---|---|---|---|---|---|
| Blade Wd. | O'all Lg. | Type | Size | Lg. | Material | Compatible Tools | Each | |
Flat Blade | ||||||||
| 5/8" | 4" | Octagon | 7/16" | 9/32" | Steel | Superior Pneumatic 90000, Superior Pneumatic 90001 | 0000000 | 000000 |
| 5/8" | 7" | Octagon | 7/16" | 9/32" | Steel | Superior Pneumatic 90000, Superior Pneumatic 90001 | 0000000 | 00000 |
| 1 1/2" | 12" | Octagon | 7/16" | 9/32" | Steel | Superior Pneumatic 90000, Superior Pneumatic 90001 | 0000000 | 00000 |
Offset Blade | ||||||||
| 3/4" | 3 1/2" | Octagon | 7/16" | 9/32" | Steel | Superior Pneumatic 90000, Superior Pneumatic 90001 | 0000000 | 00000 |
Scaler Blade | ||||||||
| 1/2" | 3 1/2" | Octagon | 7/16" | 9/32" | Steel | Superior Pneumatic 90000, Superior Pneumatic 90001 | 0000000 | 00000 |
Blank Blade | ||||||||
| 1/2" | 3" | Octagon | 7/16" | 9/32" | Steel | Superior Pneumatic 90000, Superior Pneumatic 90001 | 0000000 | 00000 |
7/16" Round Shank Chisels for Quick-Change Chiseling Hammers
Use with air-powered hammers. Also known as zip gun chisels.
For technical drawings and 3-D models, click on a part number.
Shank | ||||||||
|---|---|---|---|---|---|---|---|---|
| Blade Style | Blade Wd. | O'all Lg. | Type | Size | Lg. | Material | Each | |
| Point | 3/8" | 3 1/2" | Round | 7/16" | 9/32" | Steel | 0000000 | 000000 |
15/32" Hex Shank Chisels for Quick-Change Chiseling Hammers
Use with air-powered hammers. Also known as zip gun chisels.
For technical drawings and 3-D models, click on a part number.
Shank | ||||||||
|---|---|---|---|---|---|---|---|---|
| Blade Wd. | O'all Lg. | Type | Size | Lg. | Material | Compatible Tools | Each | |
Flat Blade | ||||||||
| 5/8" | 6" | Hex | 15/32" | 11/16" | Steel | Superior Pneumatic 120000, Superior Pneumatic 120001 | 0000000 | 000000 |
| 1" | 6" | Hex | 15/32" | 11/16" | Steel | Superior Pneumatic 120000, Superior Pneumatic 120001 | 0000000 | 00000 |
| 2" | 12" | Hex | 15/32" | 11/16" | Steel | Superior Pneumatic 120000, Superior Pneumatic 120001 | 0000000 | 00000 |
Offset Blade | ||||||||
| 3/4" | 7" | Hex | 15/32" | 11/16" | Steel | Superior Pneumatic 120000, Superior Pneumatic 120001 | 0000000 | 00000 |
Point Blade | ||||||||
| 1/8" | 5" | Hex | 15/32" | 11/16" | Steel | Superior Pneumatic 120000, Superior Pneumatic 120001 | 0000000 | 00000 |
Scaler Blade | ||||||||
| 5/8" | 5" | Hex | 15/32" | 11/16" | Steel | Superior Pneumatic 120000, Superior Pneumatic 120001 | 0000000 | 00000 |
Blank Blade | ||||||||
| 5/8" | 5" | Hex | 15/32" | 11/16" | Steel | Superior Pneumatic 120000, Superior Pneumatic 120001 | 0000000 | 00000 |
Quick-Change Air-Powered Chiseling Hammers
Designed for fast-hitting and light striking, these hammers allow easy chisel changes—pull back on the retainer to insert or remove the chisel. Use for scaling, trimming, cutting, chipping, piercing, and peening. These tools are not suitable for driving rivets.
Piston stroke determines the hammering power. The longer the stroke, the greater the power.
Air Inlet | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Blows per Minute | Piston Stroke | Average Air Consumption, cfm | Recommended Operating Air Pressure, psi | Pipe Size | Thread Type | Gender | For Air Hose ID | For Chisel Shank Type | O'all Lg. | Wt., lbs. | Housing Material | Barrel Material | Each | |
Straight Grip—Lever Speed Control | ||||||||||||||
| 0 -13,000 | 3/4" | 4 | 90 | 1/4 | NPT | Female | 1/4" | 7/16" Octagon | 7 1/4" | 1.3 | Aluminum | Steel | 0000000 | 0000000 |
| 0 -9,000 | 1 1/4" | 6 | 90 | 1/4 | NPT | Female | 1/4" | 15/32" Hex | 9 1/4" | 2.3 | Aluminum | Steel | 0000000 | 000000 |
Pistol Grip—Button Speed Control | ||||||||||||||
| 0 -13,000 | 3/4" | 4 | 90 | 1/4 | NPT | Female | 1/4" | 7/16" Octagon | 6" | 1.3 | Aluminum | Steel | 0000000 | 000000 |
| 0 -9,000 | 1 1/4" | 6 | 90 | 1/4 | NPT | Female | 1/4" | 15/32" Hex | 6" | 2.3 | Aluminum | Steel | 0000000 | 000000 |
| Blade Wd. | O'all Lg. | Shank Type | Shank Lg. | Material | Each | |
Flat Blade | ||||||
|---|---|---|---|---|---|---|
| 5/8" | 4" | 7/16" Octagon | 9/32" | Steel | 0000000 | 000000 |
| 5/8" | 7" | 7/16" Octagon | 9/32" | Steel | 0000000 | 00000 |
| 1 1/2" | 12" | 7/16" Octagon | 9/32" | Steel | 0000000 | 00000 |
Offset Blade | ||||||
| 3/4" | 3 1/2" | 7/16" Octagon | 9/32" | Steel | 0000000 | 00000 |
Scaler Blade | ||||||
| 1/2" | 3 1/2" | 7/16" Octagon | 9/32" | Steel | 0000000 | 00000 |
Blank Blade | ||||||
| 1/2" | 3" | 7/16" Octagon | 9/32" | Steel | 0000000 | 00000 |
| Blade Wd. | O'all Lg. | Shank Type | Shank Length | Material | Each | |
Flat Blade | ||||||
|---|---|---|---|---|---|---|
| 5/8" | 6" | 15/32" Hex | 11/16" | Steel | 0000000 | 000000 |
| 1" | 6" | 15/32" Hex | 11/16" | Steel | 0000000 | 00000 |
| 2" | 12" | 15/32" Hex | 11/16" | Steel | 0000000 | 00000 |
Offset Blade | ||||||
| 3/4" | 7" | 15/32" Hex | 11/16" | Steel | 0000000 | 00000 |
Point Blade | ||||||
| 1/8" | 5" | 15/32" Hex | 11/16" | Steel | 0000000 | 00000 |
Scaler Blade | ||||||
| 5/8" | 5" | 15/32" Hex | 11/16" | Steel | 0000000 | 00000 |
Blank Blade | ||||||
| 5/8" | 5" | 15/32" Hex | 11/16" | Steel | 0000000 | 00000 |
Low-Vibration Air-Powered Needle Scalers
These scalers produce 80-90% less vibration than other scaling tools. Small needles gently tap surfaces to remove unwanted rust, scale, paint, and weld spatter. They generate little dust and are excellent for use on irregular-shaped areas and in tight spots.
Piston stroke determines the force of a scaler; the longer the stroke, the greater the force.
Air Inlet | Needle | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Blows per Minute | Piston Stroke | Average Air Consumption, cfm | Recommended Operating Air Pressure, psi | Pipe Size | Thread Type | Gender | For Air Hose ID | O'all Lg. | Wt., lbs. | No. Included | Cap. | Wd. | Lg. | Material | Housing Material | Each | |
Straight Grip—Lever Speed Control | |||||||||||||||||
| 7,000 | 1 1/8" | 3 | 90 | 1/4 | NPT | Female | 3/8" | 7 3/4" | 3.6 | 18 | 18 | 1/8" | 5" | Steel | Steel | 00000000 | 0000000 |
Pistol Grip—Lever Speed Control | |||||||||||||||||
| 3,400 | 7/8" | 4 | 90 | 1/4 | NPT | Female | 3/8" | 14" | 5.8 | 19 | 19 | 1/8" | 7" | Steel | Steel | 00000000 | 000000 |
Air-Powered Needle Scalers/Chiseling Hammers with Chisels
Use as a needle scaler or insert one of the included chisels into the built-in retainer and use like an air-powered chiseling hammer. The small needles gently tap surfaces to remove unwanted rust, scale, paint, and weld spatter. They generate little dust and are excellent for use on irregular-shaped areas and in tight spots.
Piston stroke determines the force of a scaler. The longer the stroke, the greater the force.
Air Inlet | Needle | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Blows per Minute | Piston Stroke | Average Air Consumption, cfm | Recommended Operating Air Pressure, psi | Pipe Size | Thread Type | Gender | For Air Hose ID | O'all Lg. | No. Included (Wd. × Lg.) | Cap. | Material | Includes | Each | |
Straight Grip—Lever Speed Control | ||||||||||||||
| 5,500 | 3/8" | 12 | 90 | 1/4 | NPT | Female | 5/16" | 13 3/4" | 19 (1/8” x 7”) 38 (1/8” x 5”) | 19 | Steel | 1 3/8" Wide × 6 1/8" Long Angle Chisel 1 3/8" Wide × 6 1/8" Long Straight Chisel 3/4" Wide × 7" Long Flat Chisel | 0000000 | 0000000 |
| 4,000 | 1 1/8" | 13 | 90 | 1/4 | NPT | Female | 5/16" | 15" | 19 (1/8” x 7”) 38 (1/8” x 5”) | 19 | Steel | 1 3/8" Wide × 6 1/8" Long Angle Chisel 1 3/8" Wide × 6 1/8" Long Straight Chisel 3/4" Wide × 7" Long Flat Chisel | 0000000 | 000000 |
Air-Powered Needle Scalers/Chiseling Hammers
Use as a needle scaler or insert a chisel into the built-in retainer and use like an air-powered chiseling hammer. The small needles gently tap surfaces to remove unwanted rust, scale, paint, and weld spatter. They generate little dust and are excellent for use on irregular-shaped areas and in tight spots.
Piston stroke determines the force of a scaler. The longer the stroke, the greater the force.
Air Inlet | For Chisel Shank | Needle | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Blows per Minute | Piston Stroke | Average Air Consumption, cfm | Recommended Operating Air Pressure, psi | Pipe Size | Thread Type | Gender | For Air Hose ID | Type | Lg. | O'all Lg. | Wt., lbs. | No. Included | Cap. | Wd. | Lg. | Material | Housing Material | Each | |
Straight Grip—Lever Speed Control | |||||||||||||||||||
| 5,500 | 3/8" | 12 | 90 | 1/4 | NPT | Female | 5/16" | 0.495" Octagon | 51/64" | 13 3/4" | 5.3 | 19 | 19 | 1/8" | 5" | Steel | Steel | 0000000 | 0000000 |
| 4,000 | 1 1/8" | 13 | 90 | 1/4 | NPT | Female | 5/16" | 0.495" Octagon | 51/64" | 15" | 5.8 | 19 | 19 | 1/8" | 5" | Steel | Steel | 0000000 | 000000 |
Adjustable Air-Powered Needle Scalers with Chisels
The included adapter lets you use chisels in these scalers. Change the blows-per-minute by varying the pressure on the speed control. The small needles gently tap surfaces to remove unwanted rust, scale, paint, and weld spatter. They generate little dust and are excellent for use on irregular-shaped areas and in tight spots.
Piston stroke determines the force of a scaler. The longer the stroke, the greater the force.
Air Inlet | Needle | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Blows per Minute | Piston Stroke | Average Air Consumption, cfm | Recommended Operating Air Pressure, psi | Pipe Size | Thread Type | Gender | For Air Hose ID | O'all Lg. | No. Included | Cap. | Wd. | Lg. | Material | Includes | Each | |
Straight Grip—Lever Speed Control | ||||||||||||||||
| 0 -13,000 | 3/4" | 4 | 90 | 1/4 | NPT | Female | 1/4" | 12 1/2" | 18 | 9 | 1/8" | 5" | Steel | 7" Long Gouge Chisel 9/16" Wide × 4" Long Flat Chisel 7" Long Grooving Chisel 3 1/2" Long Peening Chisel Chisel Adapter | 0000000 | 0000000 |
Pistol Grip—Button Speed Control | ||||||||||||||||
| 0 -13,000 | 3/4" | 4 | 90 | 1/4 | NPT | Female | 1/4" | 11 1/2" | 18 | 9 | 1/8" | 5" | Steel | 7" Long Gouge Chisel 9/16" Wide × 4" Long Flat Chisel 7" Long Grooving Chisel 3 1/2" Long Peening Chisel Chisel Adapter | 0000000 | 000000 |
Heavy-Duty Air-Powered Needle Scalers
With no internal springs to break, this tool provides consistent performance. Small needles gently tap surfaces to remove unwanted rust, scale, paint, and weld spatter. They generate little dust and are excellent for use on irregular-shaped areas and in tight spots.
Piston stroke determines the force of a scaler. The longer the stroke, the greater the force.
Air Inlet | 3 mm Wd. Needle | 4 mm Wd. Needle | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Blows per Minute | Piston Stroke | Average Air Consumption, cfm | Recommended Operating Air Pressure, psi | Pipe Size | Thread Type | Gender | For Air Hose ID | O'all Lg. | Wt., lbs. | No. Included | Cap. | No. Included | Cap. | Needle Lg. | Needle Material | Housing Material | Each | |
Pistol Grip—Lever Speed Control | ||||||||||||||||||
| 4,500 | 3/4" | 12 | 85 | 3/8 | NPT | Female | 3/8" | 13 1/4" | 7.8 | 28 | 28 | 14 | 14 | 7" | Steel | Aluminum | 0000000 | 0000000 |
Economy Air-Powered Needle Scalers with Chisels
The included adapter lets you use chisels in these scalers. The small needles gently tap surfaces to remove unwanted rust, scale, paint, and weld spatter. They generate little dust and are excellent for use on irregular-shaped areas and in tight spots.
Piston stroke determines the force of a scaler. The longer the stroke, the greater the force.
Air Inlet | Needle | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Blows per Minute | Piston Stroke | Average Air Consumption, cfm | Recommended Operating Air Pressure, psi | Pipe Size | Thread Type | Gender | For Air Hose ID | O'all Lg. | No. Included | Cap. | Wd. | Lg. | Material | Includes | Each | |
Straight Grip | ||||||||||||||||
| 4,600 | 1 1/8" | 3 | 90 | 1/4 | NPT | Female | 3/8" | 15" | 38 | 19 | 1/8 " | 7" | Steel | One 1-3/8" wide x 6-3/4" long Angle Chisel Two 3/4" Wide x 7-1/4" Long Flat Chisels One 1-3/8" wide x 6-3/4" long Flat Chisel | 0000000 | 0000000 |
Economy Air-Powered Needle Scalers
Small needles gently tap surfaces to remove unwanted rust, scale, paint, and weld spatter. They generate little dust and are excellent for use on irregular-shaped areas and in tight spots.
Piston stroke determines the force of a scaler. The longer the stroke, the greater the force.
Air Inlet | Needle | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Blows per Minute | Piston Stroke | Average Air Consumption, cfm | Recommended Operating Air Pressure, psi | Pipe Size | Thread Type | Gender | For Air Hose ID | O'all Lg. | Wt., lbs. | No. Included | Cap. | Wd. | Lg. | Material | Housing Material | Each | |
Straight Grip | |||||||||||||||||
| 4,600 | 1 1/8" | 3 | 90 | 1/4 | NPT | Female | 3/8" | 15" | 6 | 38 | 19 | 1/8" | 7" | Steel | Steel | 0000000 | 0000000 |
| Blade Wd. | O'all Lg. | Shank Type | Shank Lg. | Material | Each | |
Flat Blade | ||||||
|---|---|---|---|---|---|---|
| 3/4" | 7" | 0.373" Round | 13/16" | Steel | 00000000 | 000000 |
| 1 3/8" | 7" | 0.373" Round | 13/16" | Steel | 00000000 | 00000 |
| 1 3/8" | 12" | 0.373" Round | 13/16" | Steel | 00000000 | 00000 |
| 2" | 7" | 0.373" Round | 13/16" | Steel | 00000000 | 00000 |
| 3" | 7 1/2" | 0.373" Round | 13/16" | Steel | 00000000 | 00000 |
Offset Blade | ||||||
| 1 3/8" | 7" | 0.373" Round | 13/16" | Steel | 00000000 | 00000 |
Adjustable Air-Powered Needle Scalers
Change the blows-per-minute by varying the pressure on the speed control. The small needles on these tools gently tap surfaces to remove unwanted rust, scale, paint, and weld spatter. They generate little dust and are excellent for use on irregular-shaped areas and in tight spots.
Piston stroke determines the force of a scaler. The longer the stroke, the greater the force.
Air Inlet | Needle | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Blows per Minute | Piston Stroke | Average Air Consumption, cfm | Recommended Operating Air Pressure, psi | Pipe Size | Thread Type | Gender | For Air Hose ID | O'all Lg. | Wt., lbs. | No. Included | Cap. | Wd. | Lg. | Material | Housing Material | Handle Material | Each | |
Straight Grip—Lever Speed Control | ||||||||||||||||||
| 0 -13,000 | 3/4" | 4 | 90 | 1/4 | NPT | Female | 1/4" | 12 1/2" | 2.5 | 18 | 9 | 1/8" | 5" | Steel | Steel | Aluminum | 0000000 | 0000000 |
Pistol Grip—Button Speed Control | ||||||||||||||||||
| 0 -13,000 | 3/4" | 4 | 90 | 1/4 | NPT | Female | 1/4" | 11 1/2" | 2.5 | 18 | 9 | 1/8" | 5" | Steel | Steel | Aluminum | 0000000 | 000000 |
Air-Powered Scrapers/Chippers
Remove weld flux and spatter as well as perform a variety of light chipping applications.
Piston stroke determines the force of a scraper; the longer the stroke, the greater the force.
Air Inlet | Blade | For Chisel Shank | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Blows per Minute | Piston Stroke | Average Air Consumption, cfm | Recommended Operating Air Pressure, psi | Pipe Size | Thread Type | Gender | For Air Hose ID | Wd. | Lg. | Material | Type | Lg. | O'all Lg. | Wt., lbs. | Housing Material | Each | |
Straight Grip—Lever Speed Control | |||||||||||||||||
| 4,000 | 1 1/8" | 7 | 85 | 3/8 | NPT | Female | 3/8" | 1" | 6 1/8" | Steel | 0.495" Octagon | 17/32", 51/64" | 12" | 3.8 | Steel | 0000000 | 0000000 |
| Blade Wd. | O'all Lg. | Shank Type | Shank Lg. | Material | Each | |
Flat Blade | ||||||
|---|---|---|---|---|---|---|
| 3/4" | 7" | 0.495" Octagon | 51/64" | Steel | 0000000 | 000000 |
| 1 3/8" | 7" | 0.495" Octagon | 51/64" | Steel | 0000000 | 00000 |
| 1 3/8" | 12" | 0.495" Octagon | 51/64" | Steel | 0000000 | 00000 |
| 2" | 7" | 0.495" Octagon | 51/64" | Steel | 0000000 | 00000 |
| 3" | 7 1/2" | 0.495" Octagon | 51/64" | Steel | 0000000 | 00000 |
Offset Blade | ||||||
| 1 3/8" | 7" | 0.495" Octagon | 51/64" | Steel | 0000000 | 00000 |
| 1 3/8" | 18" | 0.495" Octagon | 17/32" | Steel | 0000000 | 00000 |