Capacity Capacity |
|---|
|
Maximum Height Maximum Height |
|---|
Minimum Height Minimum Height |
|---|
|
|
|
Mobility Mobility |
|---|
|
Lift Mechanism Lift Mechanism |
|---|
|
Base Width Base Width |
|---|
|
|
|
Material Material |
|---|
|
Adjustment Mechanism Adjustment Mechanism |
|---|
|
Specifications Met Specifications Met |
|---|
|
Electric Stationary Lift Tables
An electric motor and a hydraulic pump perform repetitive lifting and positioning with the push of a button. The NEMA rating only applies to the push-button control.
Lift table bellows (sold separately) protect the working parts of the table from dust, dirt, and debris.
Warning: Never use to lift people.
Lift Tables | Lift Table Bellows | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Capacity, lbs. | Lg. | Wd. | Ht. | Elevation Speed, in./sec. | Material | Duty Cycle | Motor Phase | Motor Full Load Current | Plug Type | Power Cord Lg., ft. | Control Cord Lg., ft. | Specifications Met | Each | Each | ||
Hand-Operated with 120V AC External Motor | ||||||||||||||||
| 550 | 32" | 19 1/2" | 6"-28" | 2 1/4 | Steel | 9 cycles per hour | Single | 8.4A | Three Prong | 8 | 10 | ANSI MH 29.1, NEMA 1 | 0000000 | 000000000 | 0000000 | 0000000 |
| 660 | 40" | 20" | 9 1/2"-54" | 3 1/4 | Steel | 9 cycles per hour | Single | 8.4A | Three Prong | 8 | 10 | ANSI MH 29.1, NEMA 1 | 0000000 | 00000000 | 0000000 | 00000000 |
| 1,100 | 25 1/2" | 18" | 8 1/2"-33 1/2" | 1 3/4 | Steel | 9 cycles per hour | Single | 8.4A | Three Prong | 8 | 10 | ANSI MH 29.1, NEMA 1 | 0000000 | 00000000 | 0000000 | 000000 |
| 1,100 | 40" | 20" | 6"-31 1/2" | 2 | Steel | 9 cycles per hour | Single | 8.4A | Three Prong | 8 | 10 | ANSI MH 29.1, NEMA 1 | 0000000 | 00000000 | 0000000 | 000000 |
| 1,650 | 40" | 20" | 6"-31 1/2" | 1 1/2 | Steel | 9 cycles per hour | Single | 8.4A | Three Prong | 8 | 10 | ANSI MH 29.1, NEMA 1 | 0000000 | 00000000 | 0000000 | 000000 |
Hand-Operated with 120V AC Internal Motor | ||||||||||||||||
| 2,000 | 48" | 28" | 8 1/2"-38 1/2" | 1 1/4 | Steel | 9 cycles per hour | Single | 10.8A | Three Prong | 8 | 10 | ANSI MH 29.1, NEMA 12 | 0000000 | 00000000 | 0000000 | 000000 |
| 2,000 | 48" | 36" | 8 1/2"-38 1/2" | 1 1/4 | Steel | 9 cycles per hour | Single | 10.8A | Three Prong | 8 | 10 | ANSI MH 29.1, NEMA 12 | 0000000 | 00000000 | 0000000 | 000000 |
| 3,000 | 48" | 28" | 9"-42 1/2" | 1 1/4 | Steel | 9 cycles per hour | Single | 14.5A | Three Prong | 8 | 10 | ANSI MH 29.1, NEMA 4 | 00000000 | 00000000 | 0000000 | 000000 |
| 3,000 | 48" | 36" | 9"-42 1/2" | 1 1/4 | Steel | 9 cycles per hour | Single | 14.5A | Three Prong | 8 | 10 | ANSI MH 29.1, NEMA 4 | 00000000 | 00000000 | 0000000 | 000000 |
| 5,000 | 56" | 32" | 9"-48" | 3/4 | Steel | 9 cycles per hour | Single | 14.5A | Three Prong | 8 | 10 | ANSI MH 29.1, NEMA 4 | 00000000 | 00000000 | 0000000 | 00000000 |
| 5,000 | 72" | 48" | 9"-48" | 3/4 | Steel | 9 cycles per hour | Single | 14.5A | Three Prong | 8 | 10 | ANSI MH 29.1, NEMA 4 | 00000000 | 00000000 | 0000000 | 00000000 |
Hand-Operated with 480V AC Internal Motor | ||||||||||||||||
| 3,000 | 48" | 28" | 9"-42 1/2" | 1 1/4 | Steel | 9 cycles per hour | Three | 2.2A | __ | 8 | 10 | ANSI MH 29.1, NEMA 4 | 00000000 | 00000000 | 0000000 | 000000 |
| 3,000 | 48" | 36" | 9"-42 1/2" | 1 1/4 | Steel | 9 cycles per hour | Three | 2.2A | __ | 8 | 10 | ANSI MH 29.1, NEMA 4 | 00000000 | 00000000 | 0000000 | 000000 |
| 5,000 | 56" | 32" | 9"-48" | 3/4 | Steel | 9 cycles per hour | Three | 2.2A | __ | 8 | 10 | ANSI MH 29.1, NEMA 4 | 00000000 | 00000000 | 0000000 | 00000000 |
| 5,000 | 72" | 48" | 9"-48" | 3/4 | Steel | 9 cycles per hour | Three | 2.2A | __ | 8 | 10 | ANSI MH 29.1, NEMA 4 | 00000000 | 00000000 | 0000000 | 00000000 |
Foot-Operated with 120V AC Internal Motor | ||||||||||||||||
| 3,000 | 48" | 28" | 9"-42 1/2" | 1 1/4 | Steel | 9 cycles per hour | Single | 14.5A | Three Prong | 8 | 10 | ANSI MH 29.1, NEMA 1 | 00000000 | 00000000 | 0000000 | 000000 |
| 3,000 | 48" | 36" | 9"-42 1/2" | 1 1/4 | Steel | 9 cycles per hour | Single | 14.5A | Three Prong | 8 | 10 | ANSI MH 29.1, NEMA 1 | 00000000 | 00000000 | 0000000 | 000000 |
| 5,000 | 56" | 32" | 9"-48" | 3/4 | Steel | 9 cycles per hour | Single | 14.5A | Three Prong | 8 | 10 | ANSI MH 29.1, NEMA 1 | 00000000 | 00000000 | 0000000 | 00000000 |
| 5,000 | 72" | 48" | 9"-48" | 3/4 | Steel | 9 cycles per hour | Single | 14.5A | Three Prong | 8 | 10 | ANSI MH 29.1, NEMA 1 | 00000000 | 00000000 | 0000000 | 00000000 |
Foot-Operated with 480V AC Internal Motor | ||||||||||||||||
| 3,000 | 48" | 28" | 9"-42 1/2" | 1 1/4 | Steel | 9 cycles per hour | Three | 2.2A | __ | 8 | 10 | ANSI MH 29.1, NEMA 1 | 00000000 | 00000000 | 0000000 | 000000 |
| 3,000 | 48" | 36" | 9"-42 1/2" | 1 1/4 | Steel | 9 cycles per hour | Three | 2.2A | __ | 8 | 10 | ANSI MH 29.1, NEMA 1 | 00000000 | 00000000 | 0000000 | 000000 |
| 5,000 | 56" | 32" | 9"-48" | 3/4 | Steel | 9 cycles per hour | Three | 2.2A | __ | 8 | 10 | ANSI MH 29.1, NEMA 1 | 00000000 | 00000000 | 0000000 | 00000000 |
| 5,000 | 72" | 48" | 9"-48" | 3/4 | Steel | 9 cycles per hour | Three | 2.2A | __ | 8 | 10 | ANSI MH 29.1, NEMA 1 | 00000000 | 00000000 | 0000000 | 00000000 |
Electric Stationary Lift Tables for Tight Spaces
These tables are compact, yet provide the lifting capacity of standard lift tables. They have an electric motor and a hydraulic pump to perform repetitive lifting and positioning with the push of a button. The NEMA rating only applies to the push-button control.
Lift table bellows (sold separately) protect the working parts of the table from dust, dirt, and debris.
Warning: Never use to lift people.
Lift Tables | Lift Table Bellows | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Capacity, lbs. | Lg. | Wd. | Ht. | Elevation Speed, in./sec. | Tabletop Ga. | Material | Duty Cycle | Motor Phase | Motor Full Load Current | Plug Type | Power Cord Lg., ft. | Control Cord Lg., ft. | Specifications Met | Each | Each | ||
With 120V AC External Motor | |||||||||||||||||
| 500 | 25" | 12" | 5"-30" | 1 3/4 | 7 | Steel | 12 cycles per hour | Single | 8.4A | Three Prong | 10 | 10 | ANSI MH 29.1, NEMA 1 | 0000000 | 000000000 | 0000000 | 0000000 |
With 120V AC Internal Motor | |||||||||||||||||
| 2,000 | 42" | 18" | 6"-42" | 1 | 7 | Steel | 12 cycles per hour | Single | 8.4A | Three Prong | 10 | 10 | ANSI MH 29.1, NEMA 1 | 0000000 | 00000000 | 0000000 | 000000 |
Long-Tabletop Electric Stationary Lift Tables
An extra-large tabletop provides plenty of room for oversized loads. Tables have an electric motor and a hydraulic pump that perform repetitive lifting and positioning with the push of a button. The NEMA rating only applies to the push-button control.
Lift table bellows (sold separately) protect the working parts of the table from dust, dirt, and debris.
Warning: Never use to lift people.
Lift Tables | Lift Table Bellows | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Capacity, lbs. | Lg. | Wd. | Ht. | Elevation Speed, in./sec. | Tabletop Ga. | Material | Duty Cycle | Motor Full Load Current | Plug Type | Power Cord Lg., ft. | Control Cord Lg., ft. | Specifications Met | Each | Each | ||
With 120V AC Motor | ||||||||||||||||
| 2,000 | 96" | 48" | 6 1/2"-42 1/2" | 3/4 | 7 | Steel | 12 cycles per hour | 8.4A | Three Prong | 10 | 10 | ANSI MH 29.1, NEMA 1 | 0000000 | 000000000 | 0000000 | 000000000 |
| 6,000 | 96" | 48" | 8"-44" | 1/2 | 7 | Steel | 12 cycles per hour | 8.4A | Three Prong | 10 | 10 | ANSI MH 29.1, NEMA 1 | 0000000 | 000000000 | 0000000 | 00000000 |
Floor-Load Electric Stationary Lift Tables
The tabletop can go as low as 3", making loading and unloading from the floor and pallets easier. Tables have an electric motor and a hydraulic pump that perform repetitive lifting and positioning with the push of a button. The NEMA rating only applies to the push-button control. A toe guard at the base of the table provides safety for the operator.
Warning: Never use to lift people.
| Capacity, lbs. | Lg. | Wd. | Ht. | Elevation Speed, in./sec. | Tabletop Ga. | Material | Duty Cycle | Motor Phase | Motor Full Load Current | Plug Type | Power Cord Lg., ft. | Control Cord Lg., ft. | Specifications Met | Includes | Each | |
With 120V AC Motor | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 550 | 40" | 23 1/2" | 3"-29 1/2" | 2 1/2 | 10 | Steel | 9 cycles per hour | Single | 8.4A | Three Prong | 8 | 10 | ANSI MH 29.1, NEMA 4 | 6-ft. Long Hydraulic Hose | 0000000 | 000000000 |
| 1,100 | 40" | 23 1/2" | 3"-30" | 1 1/4 | 10 | Steel | 9 cycles per hour | Single | 8.4A | Three Prong | 8 | 10 | ANSI MH 29.1, NEMA 4 | 6-ft. Long Hydraulic Hose | 0000000 | 00000000 |
| Optional 23" Long Loading Ramp | 0000000 | Each | 0000000 |
Turntable-Top Electric Stationary Lift Tables
The turntable rotates to reduce reaching. Tables have an electric motor and a hydraulic pump that perform repetitive lifting and positioning with the push of a button. The NEMA rating only applies to the push-button control.
Lift table bellows (sold separately) protect the working parts of the table from dust, dirt, and debris.
Warning: Never use to lift people.
Lift Tables | Lift Table Bellows | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Capacity, lbs. | Lg. | Wd. | Ht. | Elevation Speed, in./sec. | Tabletop Ga. | Turntable Dia. | Material | Duty Cycle | Motor Full Load Current | Plug Type | Control Cord Lg., ft. | Specifications Met | Each | Each | ||
Round with 120V AC Motor | ||||||||||||||||
| 2,000 | __ | __ | 11 1/2"-41 1/2" | 1 1/4 | 11 | 43" | Steel | 9 cycles per hour | 14.5A | Three Prong | 10 | ANSI MH 29.1, NEMA 1 | 0000000 | 000000000 | 0000000 | 0000000 |
| 3,000 | __ | __ | 12"-45 1/2" | 1 1/4 | 11 | 43" | Steel | 9 cycles per hour | 14.5A | Three Prong | 10 | ANSI MH 29.1, NEMA 1 | 0000000 | 00000000 | 0000000 | 000000 |
Square with 120V AC Motor | ||||||||||||||||
| 3,500 | 48" | 48" | 8"-43 1/2" | 3/4 | 7 | 43" | Steel | 20 cycles per hour | 17A | Three Prong | 10 | ANSI MH 29.1, NEMA 1 | 0000000 | 00000000 | 0000000 | 000000 |
Design-Your-Own Stationary Air-Lift Tables
Choose your table based on capacity, then choose the type of control that best suit your application. You'll also need a tabletop. No hydraulics, motors, or pumps to maintain and no electrical connection required, just connect these tables to your compressed air system. Durable air bags provide consistent and smooth lifting. A relief valve prevents pressure build-up to provide overload protection.
Lift table bellows (sold separately) protect the working parts of the table from dust, dirt, and debris.
Warning: Never use to lift people.
| Capacity, lbs. | Lg. | Wd. | Ht. | Frame Ga. | Material | Air Pressure, psi | Flow Rate | Air Inlet Pipe Size | Air Inlet Thread Type | Air Inlet Gender | Each | |
| 1,000 | 35 1/2" | 47" | 7"-32" | 3 | Steel | 80 | 15 cfm @ 80 psi | 1/2 | NPT | Female | 000000 | 000000000 |
| 2,000 | 35 1/2" | 47" | 7"-32" | 3 | Steel | 80 | 15 cfm @ 80 psi | 1/2 | NPT | Female | 000000 | 00000000 |
| 3,000 | 35 1/2" | 47" | 7"-32" | 3 | Steel | 80 | 15 cfm @ 80 psi | 1/2 | NPT | Female | 000000 | 00000000 |
| Lift Table Bellows | 000000 | Each | 0000000 |
| Lg. | Wd. | Thick. | Material | Each | |
| 36" | 48" | 1/4" | Steel | 000000 | 0000000 |
Stationary Air-Lift Tables
Tables come ready to operate with no hydraulics, motors, or pumps to maintain and no electrical connection required. These tables connect to your compressed air system. Durable air bags provide consistent and smooth lifting. A relief valve prevents pressure build-up to provide overload protection.
Lift table bellows (sold separately) protect the working parts of the table from dust, dirt, and debris.
Warning: Never use to lift people.
Lift Tables | Lift Table Bellows | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Capacity, lbs. | Lg. | Wd. | Ht. | Tabletop Ga. | Material | Air Pressure, psi | Flow Rate | Air Inlet Pipe Size | Air Inlet Thread Type | Air Inlet Gender | Each | Each | ||
| 2,000 | 48" | 48" | 8"-32" | 3 | Steel | 80 | 15 cfm @ 80 psi | 1/4 | NPT | Female | 00000000 | 000000000 | 0000000 | 0000000 |
| 4,000 | 48" | 48" | 8"-32" | 3 | Steel | 80 | 15 cfm @ 80 psi | 1/4 | NPT | Female | 00000000 | 00000000 | 0000000 | 000000 |
Air-Powered Stationary Lift Tables
Connect these tables to your compressed air system; a hydraulic pump and an air-driven motor make repetitive lifting and positioning less of a chore. Tables have a compact design, so they fit in confined spaces.
Lift table bellows (sold separately) protect the working parts of the table from dust, dirt, and debris.
Warning: Never use to lift people.
Lift Tables | Lift Table Bellows | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Capacity, lbs. | Lg. | Wd. | Ht. | Tabletop Ga. | Material | Air Pressure, psi | Air Inlet Pipe Size | Air Inlet Thread Type | Air Inlet Gender | Elevation Speed, in./sec. | Hose Lg., ft. | Control Cord Lg., ft. | Specifications Met | Each | Each | ||
| 550 | 32" | 19 1/2" | 6"-28" | 13 | Steel | 40 | 1/4 | NPT | Female | 1/2 | 6 | 6 | ANSI MH 29.1 | 0000000 | 000000000 | 0000000 | 0000000 |
| 660 | 40" | 20" | 9 1/2"-54" | 10 | Steel | 40 | 1/4 | NPT | Female | 3/4 | 6 | 6 | ANSI MH 29.1 | 0000000 | 00000000 | 0000000 | 00000000 |
| 1,100 | 40" | 20" | 6"-31 1/2" | 10 | Steel | 40 | 1/4 | NPT | Female | 1/2 | 6 | 6 | ANSI MH 29.1 | 0000000 | 00000000 | 0000000 | 000000 |
Foot-Operated Stationary Lift Tables
Make repetitive lifting and positioning less of a chore. These tables have a foot lever and hydraulic pump to raise the load. A hand knob provides controlled lowering. All have a compact design, so they fit in confined spaces.
Lift table bellows (sold separately) protect the working parts of the table from dust, dirt, and debris.
Warning: Never use to lift people.
Lift Tables | Lift Table Bellows | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Capacity, lbs. | Lg. | Wd. | Ht. | Elevation per Stroke | Tabletop Ga. | Material | Specifications Met | Each | Each | ||
| 440 | 25 1/2" | 19 1/2" | 5"-21" | 1/2" | 13 | Steel | ANSI MH 29.1 | 0000000 | 000000000 | 0000000 | 0000000 |
| 550 | 32" | 19 1/2" | 5"-28" | 1/2" | 13 | Steel | ANSI MH 29.1 | 0000000 | 00000000 | 0000000 | 000000 |
| 660 | 40" | 20" | 9 1/2"-54" | 3/4" | 10 | Steel | ANSI MH 29.1 | 0000000 | 00000000 | 0000000 | 00000000 |
| 1,100 | 40" | 20" | 6"-31 1/2" | 1/2" | 10 | Steel | ANSI MH 29.1 | 0000000 | 00000000 | 0000000 | 000000 |
| 1,650 | 40" | 20" | 6"-31 1/2" | 3/8" | 10 | Steel | ANSI MH 29.1 | 0000000 | 00000000 | 0000000 | 000000 |
Foot-Operated Mobile Lift Tables
These tables have a foot lever and hydraulic pump to raise loads and either a hand valve or hand lever for controlled lowering.
Tables with floor lock stay stationary while in use.
Table with relief valve has a valve to prevent pressure build-up and provide overload protection.
Warning: Do not roll or reposition while under load. Never use to lift people.
| Capacity, lbs. | Lg. | Wd. | Ht. | Elevation per Stroke | Tabletop Ga. | Material | Handle Ht. | Wheel Configuration | Brake Type | Wheel Material | Wheel Dia. | Specifications Met | Features | Each | |
| 330 | 27 1/2" | 18" | 8 1/2"-28 1/2" | 1 1/4" | 14 | Steel | 31 1/2" | Two Swivel and Two Rigid Casters | Wheel Brake | Rubber | 4" | __ | Relief Valve | 0000000 | 0000000 |
| 550 | 31 1/2" | 20" | 9 1/2"-31 1/2" | 1" | 14 | Steel | 36 1/2" | Two Swivel and Two Rigid Casters | Floor Lock | Rubber | 4" | __ | __ | 0000000 | 000000 |
| 600 | 32" | 20" | 10"-33" | 1" | 7 | Steel | 35 1/2" | Two Swivel and Two Rigid Casters | Floor Lock | Phenolic Plastic | 5" | ANSI MH 29.1 | __ | 0000000 | 00000000 |
| 770 | 36" | 24" | 14"-49 1/2" | 3/4" | 14 | Steel | 38" | Two Swivel and Two Rigid Casters | Floor Lock | Rubber | 5" | __ | __ | 0000000 | 00000000 |
| 1,000 | 36" | 24" | 9 1/2"-33" | 5/8" | 7 | Steel | 35 1/2" | Two Swivel and Two Rigid Casters | Floor Lock | Phenolic Plastic | 5" | ANSI MH 29.1 | __ | 0000000 | 00000000 |
| 1,000 | 48" | 24" | 9 1/2"-45" | 3/4" | 7 | Steel | 35 1/2" | Two Swivel and Two Rigid Casters | Floor Lock | Phenolic Plastic | 5" | ANSI MH 29.1 | __ | 0000000 | 00000000 |
| 1,000 | 48" | 36" | 9 1/2"-45" | 3/4" | 7 | Steel | 35 1/2" | Two Swivel and Two Rigid Casters | Floor Lock | Phenolic Plastic | 5" | ANSI MH 29.1 | __ | 0000000 | 00000000 |
| 1,100 | 36" | 24" | 12"-36 1/2" | 1/2" | 14 | Steel | 38" | Two Swivel and Two Rigid Casters | Floor Lock | Rubber | 5" | __ | __ | 0000000 | 00000000 |
| 1,500 | 48" | 24" | 9 1/2"-45" | 1/2" | 7 | Steel | 35 1/2" | Two Swivel and Two Rigid Casters | Floor Lock | Phenolic Plastic | 5" | ANSI MH 29.1 | __ | 0000000 | 00000000 |
| 1,760 | 39 1/2" | 24" | 12"-40" | 3/8" | 14 | Steel | 39" | Two Swivel and Two Rigid Casters | Floor Lock | Plastic | 6" | __ | __ | 0000000 | 00000000 |
| Replacement Floor Lock Pad for 550 lb., 770 lb., 1100 lb., and 1760 lb. Cap. Tables | 0000000 | Each | 000000 |
Battery-Powered Mobile Lift Tables
Push the button and a hydraulic pump adjusts the load. Tables run on a motor that is powered by a sealed, maintenance-free battery and built-in charger. The NEMA rating only applies to the push-button control. The control has a self-retracting cord. A floor lock keeps the table stationary.
Warning: Do not roll or reposition while under load. Never use to lift people.
Wheel | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Capacity, lbs. | Lg. | Wd. | Ht. | Elevation Speed, in./sec. | Duty Cycle | Batteries Included | Battery Charger Current, A | Battery Recharge Time, hrs. | Plug Type | Control Cord Lg., ft. | Tabletop Ga. | Material | Handle Ht. | Material | Dia. | Specifications Met | Each | |
Scissor Style | ||||||||||||||||||
| 1,000 | 36" | 24" | 9 1/2"-33" | 2 1/4 | 15 cycles per hour | Yes | 5 | 6-8 | Three Prong | 2 1/2-8 | 7 | Steel | 35 1/2" | Phenolic Plastic | 5" | ANSI MH 29.1, NEMA 1 | 0000000 | 000000000 |
| 1,000 | 48" | 24" | 9 1/2"-45" | 2 1/2 | 15 cycles per hour | Yes | 5 | 6-8 | Three Prong | 2 1/2-8 | 7 | Steel | 35 1/2" | Phenolic Plastic | 5" | ANSI MH 29.1, NEMA 1 | 0000000 | 00000000 |
| 1,500 | 48" | 24" | 9 1/2"-45" | 1 3/4 | 15 cycles per hour | Yes | 5 | 6-8 | Three Prong | 2 1/2-8 | 7 | Steel | 35 1/2" | Phenolic Plastic | 5" | ANSI MH 29.1, NEMA 1 | 0000000 | 00000000 |
| 1,500 | 48" | 36" | 9 1/2"-45" | 1 3/4 | 15 cycles per hour | Yes | 5 | 6-8 | Three Prong | 2 1/2-8 | 7 | Steel | 35 1/2" | Phenolic Plastic | 5" | ANSI MH 29.1, NEMA 1 | 0000000 | 00000000 |
Scissor Jacks
Fit this compact jack under low-height loads.
Warning: Never use to support people or loads over people.
For technical drawings and 3-D models, click on a part number.
Capacity @ 4" Min. Ht. | Capacity @ 7" Ht. | Capacity @ 9" Max. Ht. | Saddle | Base | Mounting | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| tons | lbs. | tons | lbs. | tons | lbs. | Ht. | Max. Lift | Max. Wd. | Wd. | Lg. | Wd. | Lg. | Handle Lg. | Body Material | Fasteners Included | No. of Holes | Hole Dia. | Each | |
| 1/8 | 250 | 1/4 | 675 | 1 1/2 | 3,000 | 4"-13" | 9" | 10 1/2" | 2" | 5 1/8" | 4 1/4" | 7 3/8" | 22" | Steel | No | 2 | 3/8" | 0000000 | 000000 |
Hydraulic Scissor Jacks
Fit this compact jack under low-height loads. Its grooved, rubber saddle is designed for vehicle lifting.
Warning: Never use to support people or loads over people.
For technical drawings and 3-D models, click on a part number.
Capacity @ 4 1/2" Min. Ht. | Capacity @ 10 1/2" Max. Lift | Capacity @ 7" Ht. | Saddle | Base | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| tons | lbs. | tons | lbs. | tons | lbs. | Ht. | Max. Lift | Max. Wd. | Movement | Lg. | Wd. | Lg. | Wd. | Handle Lg. | Body Material | Features | Each | |
| 3/4 | 1,760 | 3/4 | 1,760 | 3/4 | 1,760 | 4 1/2"-15" | 10 1/2" | 15 1/2" | Rigid | 2 1/2" | 1 1/2" | 4 1/4" | 4 1/2" | 14 1/2" | Steel | Removable Handle | 00000000 | 0000000 |
Air-Actuated Auto-Leveling Pallet Stands—Not for Lifting
These stands keep the top of your load at a convenient height; an air cylinder automatically returns the stand to your set height as you add or remove parts of your load. The turntable rotates 360° to reduce reaching. A maximum of 60 psi of air is needed for setup but not for operation. Adjust height before adding pallets. A three-position knob allows capacity adjustments while a relief valve prevents pressure build-up to provide overload protection. The stand must be loaded to at least the minimum capacity for auto-leveling to engage.
Warning: Not for lifting. Never use to support people.
Air Inlet | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Capacity, lbs. | Turntable Dia. | Lg. | Wd. | Ht. | Material | Actuator Material | Pipe Size | Thread Type | Gender | Forklift Entry | Specifications Met | Each | |
| 250-4,000 | 43" | 49" | 24 3/8" | 10 1/2"-30 1/2" | Steel | Rubber | 1/4 | NPT | Female | Yes | ANSI MH 29.1 | 000000 | 000000000 |
Spring-Actuated Auto-Leveling
Pallet Stands—Not for Lifting
Use one to three springs (included) to automatically maintain a convenient ergonomic working height based on the load. A built-in damper provides smooth and gradual raising and lowering without bounce. The turntable rotates 360° to reduce reaching. The stand must be loaded to at least the minimum capacity for auto-leveling to engage.
Warning: Not for lifting. Never use to support people.
| Capacity, lbs. | Turntable Dia. | Lg. | Wd. | Ht. | Material | No. of Springs | Forklift Entry | Each | |
| 400-4,500 | 43 5/8" | 36 1/4" | 36 5/8" | 9 1/2"-27 1/2" | Steel | 3 | Yes | 0000000 | 000000000 |
Bench-Top Adjustable-Height Positioning Stands
Also known as laboratory jacks, these stands are often used to position small shop and laboratory equipment.
Attach a support rod to stands with a 6" Lg.×6" Wd. head or larger to mount items, such as temperature probes, thermometer clamps, or flask and column clamps.
Ratcheting control handles replace the knob on stands with a 12" Lg.×12" Wd. head or larger for easier height adjustments.
For technical drawings and 3-D models, click on a part number.
Stands | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
Head | Support Rods | Ratcheting Control Handles | ||||||||
| Max. Load Capacity, lbs. | Ht. | Lg. | Wd. | Material | Each | Each | Each | |||
| 100 | 2 1/2"-5" | 3" | 3" | Stainless Steel | 0000000 | 0000000 | 000000 | 00 | 000000 | 00 |
| 100 | 2 1/2"-5" | 4" | 4" | Stainless Steel | 0000000 | 000000 | 000000 | 00 | 000000 | 00 |
| 100 | 4"-19 1/2" | 12" | 12" | Stainless Steel | 0000000 | 000000 | 000000 | 000000 | 0000000 | 000000 |
| 100 | 4"-19 1/2" | 16" | 16" | Stainless Steel | 0000000 | 00000000 | 000000 | 00000 | 0000000 | 00000 |
| 133 | 3"-9 3/4" | 6" | 6" | Stainless Steel | 0000000 | 000000 | 000000 | 00000 | 000000 | 00 |
| 227 | 3 1/2"-13" | 8" | 8" | Stainless Steel | 0000000 | 000000 | 000000 | 00000 | 000000 | 00 |
| 247 | 3 1/2"-13" | 10" | 10" | Stainless Steel | 0000000 | 000000 | 000000 | 00000 | 000000 | 00 |