About Draw Latches
More
About Push-to-Close Latches
More
Storm Door Handles
These handles can lock with a button from the inside.
For technical drawings and 3-D models, click on a part number.
Handle | Inside Handle | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| For Door Thick. | Lg. | Wd. | Projection | Lg. | Wd. | Projection | Mounting Hardware Included | Choose a Finish | Each | |
| 3/4"-1 1/4" | 6" | 7/8" | 1 1/2" | 2 1/4" | 2 1/4" | 1 1/2" | Yes | 0000000 | 000000 | |
Storm Door Knobs
This knob can lock with a button from the inside.
For technical drawings and 3-D models, click on a part number.
Knob | Inside Handle | |||||||
|---|---|---|---|---|---|---|---|---|
| For Door Thick. | Dia. | Projection | Lg. | Projection | Finish | Mounting Hardware Included | Each | |
| 3/4"-1 1/8" | 1 5/8" | 1 7/8" | 4 1/4" | 1 1/2" | Painted Silver | Yes | 00000000 | 000000 |
Snap-Arm Roller Latches
There's no need for a mating strike plate for this latch—its spring-loaded arm snaps to engage when closing the door. Open the door to release the latch.
For technical drawings and 3-D models, click on a part number.
| Material | Arm Lg. | Lg. | Ht. | Projection | Mounting Hole Ctr.-to-Ctr. | Roller Material | Mounting Fasteners Included | Each | |
| Zinc-Plated Steel | 2 3/4" | 1 1/4" | 1 3/4" | 1 3/4" | 1 3/8" | Rubber | Yes | 0000000 | 00000 |
Snap Latches
These latches snap together to secure doors. They have a return spring to snap tight with a push and release with a pull.
Latches with a pull tab make it easy to open your door or panel if it doesn’t have a handle.
For technical drawings and 3-D models, click on a part number.
Strike Plate | Mounting | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Ht. | Wd. | Dp. | Temp. Range, °F | Min. Pull Strength, lbs. | Mounting Hole Ctr.-to-Ctr. | Ht. | Wd. | Dp. | Mounting Hole Ctr.-to-Ctr. | Fasteners Included | Screw Size  | Each | |
Gray Plastic | |||||||||||||
| 1" | 1 1/2" | 1/2" | 0° to 175° | 22 | 1 3/32" | 1 1/4" | 1 1/2" | 1/2" | 1 3/32" | No | M4 | 0000000 | 00000 |
Black Plastic | |||||||||||||
| 1" | 1 1/2" | 1/2" | 0° to 175° | 22 | 1 3/32" | 1 1/4" | 1 1/2" | 1/2" | 1 3/32" | No | M4 | 0000000 | 0000 |
| 1" | 1 1/2" | 1/2" | 0° to 175° | 56 | 1 3/32" | 1 1/4" | 1 1/2" | 1/2" | 1 3/32" | No | M4 | 0000000 | 0000 |
Black Plastic with Pull Tab | |||||||||||||
| 1" | 1 1/2" | 1 1/4" | 0° to 175° | 560 | 1 3/32" | 1 1/4" | 1 1/2" | 1 1/4" | 1 3/32" | No | M4 | 0000000 | 0000 |
Push-to-Close Latches with Edge-Pull Handle for Sliding Doors
Quickly push to secure sliding doors. An edge-pull handle fits where traditional handles don’t and makes these latches easy to open. Often used on T-slotted framing, they have a two-piece design.
For technical drawings and 3-D models, click on a part number.
Strike Plate | Mounting | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Max. Latching Distance | Lg. | Wd. | Projection | Latch Bolt Projection | Wd. | Ht. | Mounting Hole Ctr.-to-Ctr. | Fasteners Included | Screw Size | Hole Ctr.-to-Ctr. | Each | |
Black Powder-Coated Zinc | ||||||||||||
| 1/16" | 2 15/16" | 2 5/8" | 1 3/16" | 1/4" | 15/16" | 2 15/16" | 2 3/16" | No | M6 | 2 3/16" | 0000000 | 000000 |
Hex-Drive Snap Locks
Snap these latches together to secure doors and use a hex key to open. They have a return spring that automatically snaps tight with a push and releases with a pull.
For technical drawings and 3-D models, click on a part number.
Strike Plate | Mounting | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Material | Ht. | Wd. | Dp. | Hex Size, mm | Mounting Hole Ctr.-to-Ctr. | Ht. | Wd. | Dp. | Mounting Hole Ctr.-to-Ctr. | Screw Size | Fasteners Included | Each | |
| Black Plastic | 1 1/16" | 1 1/2" | 9/16" | 8 | 1 3/32" | 1 1/4" | 1 1/2" | 1/2" | 1 3/32" | M4 | No | 0000000 | 000000 |
Two-Way-Drive Push-to-Close Locks for Sliding Doors
Secure sliding doors on industrial cabinets and enclosure panels with a push. These locks are more convenient to use than cam and draw locks, since you don’t need to turn them to close. Open them with a two-way key (sold separately). Also called a double-bit key, this type matches a keying system that’s common for industrial enclosures and other machinery but is more secure than a hex key or slotted driver. These locks also have a concealed design that prevents others from tampering with them using pliers.
Mount these locks to the back of your door. They require a through-hole in the front of your door to insert your key. To change how far they project into your enclosure, these locks include two mounting brackets with different depths. They don’t come with a catch, so you’ll need to cut a slot in your door frame or mount a stud.
For technical drawings and 3-D models, click on a part number.
Locks | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mounting | Enclosure Keys | ||||||||||||||
| For Max. Door Thick. | Door Mounting Location | Key Size | Max. Latching Distance | For Through Hole Dia. | Ht. | Wd. | Rear Projection | Latch Bolt Projection | Fasteners Included | Screw Size | Includes | Each | Each | ||
Through-Hole Mount | |||||||||||||||
Zinc-Plated Steel—Dull | |||||||||||||||
| 1/8" | Left Side | 3 mm | 1" | 7/8" | 4 5/16" | 1 7/16" | 7/16", 11/16" | 1 3/16" | No | M5 | Two Mounting Brackets | 0000000 | 000000 | 0000000 | 00000 |
| 1/8" | Left Side | 5 mm | 1" | 7/8" | 4 5/16" | 1 7/16" | 7/16", 11/16" | 1 3/16" | No | M5 | Two Mounting Brackets | 0000000 | 00000 | 0000000 | 0000 |
| 1/8" | Right Side | 3 mm | 1" | 7/8" | 4 5/16" | 1 7/16" | 7/16", 11/16" | 1 3/16" | No | M5 | Two Mounting Brackets | 0000000 | 00000 | 0000000 | 0000 |
| 1/8" | Right Side | 5 mm | 1" | 7/8" | 4 5/16" | 1 7/16" | 7/16", 11/16" | 1 3/16" | No | M5 | Two Mounting Brackets | 0000000 | 00000 | 0000000 | 0000 |
Keyed Push-to-Close Locks with Edge-Pull Handle for Sliding Doors
For use on on sliding doors—including those on T-slotted framing systems—these locks have a two-piece design that locks when pushed closed. An edge-pull handle makes these locks easy to open and fits where traditional handles don’t. Compared to cam and draw locks, these locks are more convenient because they easily latch with a single push.
Choose keyed alike locks when you need several locks that open with the same key. Choose keyed differently locks when you need locks that each open with a different key.
For technical drawings and 3-D models, click on a part number.
Strike Plate | Mounting | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Max. Latching Distance | Lg. | Wd. | Projection | Latch Bolt Projection | Ht. | Wd. | Mounting Hole Ctr.-to-Ctr. | Fasteners Included | Screw Size | Hole Ctr.-to-Ctr. | Key No. | No. of Keys Included | For Use On | Each | |
Keyed Alike | |||||||||||||||
Black Powder-Coated Zinc | |||||||||||||||
| 5/16" | 2 15/16" | 2 5/8" | 1 3/16" | 1/4" | 2 15/16" | 15/16" | 2 3/16" | No | M6 | 2 3/16" | 1333 | 2 | Metal, Wood | 0000000 | 000000 |
Keyed Differently | |||||||||||||||
Black Powder-Coated Zinc | |||||||||||||||
| 5/16" | 2 15/16" | 2 5/8" | 1 3/16" | 1/4" | 2 15/16" | 15/16" | 2 3/16" | No | M6 | 2 3/16" | __ | 2 | Metal, Wood | 0000000 | 00000 |
Two-Way-Drive Snap Locks
Push doors closed and a return spring automatically snaps these locks together to secure them tightly in place. Pull them open with the included two-way key, which is also known as a double-bit key.
For technical drawings and 3-D models, click on a part number.
Snap-Down Draw Latches
These latches snap in place to eliminate rattling and hold access doors, screens, windows, and panels.
Style A, B, and C latches are best for flat applications.
Style D latches reach around outside corners to draw perpendicular surfaces together.
Style E latches are for use on offset panels. Mount them on the edge of one panel and then snap them down to hold a parallel panel that’s recessed inside a mounting frame.
Style F latches are for use on inside corners.
For technical drawings and 3-D models, click on a part number.
Overall | Mounting | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Style | Material | Mounting Plate Material | Appearance | Latching Distance | Lg. | Wd. | Arm Wd. | Mounting Plate Lg. | Capacity | Mounting Hole Ctr.-to-Ctr. | Fasteners Included | Screw Size | Pkg. Qty. | Pkg. | |
| A | Zinc-Plated Steel | Zinc-Plated Steel | Dull | 1 1/8" | 2 1/8" | 1" | 7/16" | 1 1/4" | Not Rated | __ | No | No. 10 | 20 | 00000000 | 000000 |
| A | 304 Stainless Steel | 450 Stainless Steel | Polished | 1 1/8" | 2 1/8" | 1" | 7/16" | 1 1/4" | Not Rated | 0.531" | No | No. 10 | 10 | 00000000 | 00000 |
| B | Zinc-Plated Steel | Zinc-Plated Steel | Dull | 1 5/16" | 2 3/8" | 1" | 7/16" | 1 1/4" | Not Rated | __ | No | No. 10 | 20 | 00000000 | 00000 |
| B | 304 Stainless Steel | 450 Stainless Steel | Polished | 1 5/16" | 2 3/8" | 1" | 7/16" | 1 1/4" | Not Rated | 0.531" | No | No. 10 | 10 | 00000000 | 00000 |
| C | Zinc-Plated Steel | Zinc-Plated Steel | Dull | 1 5/16" | 2 1/2" | 1" | 7/16" | 1 1/4" | Not Rated | __ | No | No. 10 | 20 | 00000000 | 00000 |
| C | 304 Stainless Steel | 450 Stainless Steel | Polished | 1 5/16" | 2 1/2" | 1" | 7/16" | 1 1/4" | Not Rated | 0.531" | No | No. 10 | 10 | 00000000 | 00000 |
| D | Zinc-Plated Steel | Zinc-Plated Steel | Dull | 11/16" | 1 5/8" | 1" | 7/16" | 1 1/4" | Not Rated | __ | No | No. 10 | 20 | 000000000 | 00000 |
| D | 304 Stainless Steel | 450 Stainless Steel | Polished | 11/16" | 1 5/8" | 1" | 7/16" | 1 1/4" | Not Rated | 0.531" | No | No. 10 | 10 | 000000000 | 00000 |
| E | Zinc-Plated Steel | Zinc-Plated Steel | Dull | 1 1/4" | 2 1/8" | 1" | 7/16" | 1 1/4" | Not Rated | __ | No | No. 10 | 20 | 000000000 | 00000 |
| E | 304 Stainless Steel | 450 Stainless Steel | Polished | 1 1/4" | 2 1/8" | 1" | 7/16" | 1 1/4" | Not Rated | 0.531" | No | No. 10 | 10 | 000000000 | 00000 |
| F | Zinc-Plated Steel | Zinc-Plated Steel | Dull | 1 11/16" | 2" | 1" | 7/16" | 1 1/4" | Not Rated | __ | No | No. 10 | 20 | 000000000 | 00000 |
| F | 304 Stainless Steel | 450 Stainless Steel | Polished | 1 11/16" | 2" | 1" | 7/16" | 1 1/4" | Not Rated | 0.531" | No | No. 10 | 10 | 000000000 | 00000 |