Use these corrosion-resistant fittings in a low-pressure pipe line.

Use these heavy duty, corrosion-resistant fittings in high-pressure flow applications.

These fittings are made to tighter tolerances than other stainless steel pipe fittings. They are also known as instrumentation fittings.

Use these fittings for low-pressure applications in noncorrosive environments.

The male threads on these fittings have a sealant applied for extra leak protection.

These fittings are strong enough to handle extreme pressures, yet small enough to fit into cramped spaces.

The strongest steel fittings we offer, these can withstand extreme-pressure applications.

A galvanized finish gives these fittings fair corrosion resistance. They have the strength to handle medium-pressure applications.

Less than an inch in length, these miniature fittings work well in low-pressure pipe lines that are tight on space.

The male threads on these brass fittings have a sealant applied for extra protection against leaks. Also known as Pressure Class 125 fittings, they are built for use in low-pressure applications.

These brass fittings have the strength to handle high-pressure applications.

Use these heavy-duty brass fittings for high-pressure drinking water applications.

Extreme pressures are no problem for these heavy-duty brass fittings.

In addition to being lightweight, these aluminum fittings offer good corrosion resistance. Use them in low-pressure flow applications.

Connect these fittings to thick-wall plastic pipe—they have thicker, stronger walls than standard-wall fittings, so they can handle heavy duty industrial plumbing and water supply applications, such as water processing, waste water treatment, and irrigation. They can withstand pressures up to 900 psi.

Use for pressures up to 200 psi. Also known as insert fittings, these slide into semi-flexible plastic pipe and secure with a clamp.

Made of corrosion-resistant plastic, these fittings won’t deteriorate when used in oil applications. They have high strength and impact resistance.

Made of polypropylene, these fittings won’t deteriorate when exposed to the damaging effects of ultraviolet light and are suitable to use outdoors. They have the chemical resistance to withstand acids, solvents, and other harsh substances.

Extreme temperatures are no problem for these fittings—they’re made of PTFE, so they can withstand a wider temperature range than any of our other plastic pipe fittings for chemicals. They are commonly used in high-purity chemical flow processes, such as semiconductor and clean room applications.

Plugs are are suitable for food and beverage applications and won't impart tastes or odors to your product.

Thread these caps and plugs onto fire hydrants and washdown equipment to close off the line. They have rocker lugs for easy gripping.

Conceal and protect the tops of socket head or button head screws.

To conceal and protect the entire screw head, insert your screw through the hole in the base and snap on the top.

Seal tube and hose fittings to keep their straight threads protected from contaminants during fabrication and storage.

These plugs withstand temperatures up to 600° F to protect internally threaded NPT connections from contaminants during electropainting, paint baking, and powder coating applications.

Safeguard internally threaded BSPT connections from contaminants during fabrication and storage.

Keep equipment safe from electrical currents with these plugs that have a surface resistivity of less than 10¹² ohms.

The hollow construction allows these plugs to compress for a snug fit in threaded and unthreaded holes of varying diameters. Good for electroplating, paint baking, and powder-coating applications, they withstand temperatures up to 450° F.

FDA compliant for use near food, these plugs close off unused holes in equipment such as electrical enclosures to keep out debris and water.

Also known as lag shields, these anchors are designed for use with large-diameter wood screws.

These steel anchors are available with corrosion-resistant finishes.

More corrosion resistant than 18-8 stainless steel anchors, these 316 stainless steel anchors have excellent resistance to chemicals and salt water.

The removable flat head provides a flush finish in countersunk holes.

A zinc plating provides corrosion resistance in wet environments.

A zinc plating provides corrosion resistance in wet environments.

More corrosion resistant than 18-8 stainless steel anchors, these 316 stainless steel anchors have excellent resistance to chemicals and salt water.

Install like a stud anchor—just thread the anchor, a nut, and a washer onto the end of a threaded rod, drive into a hole, and turn the nut to expand the base. Also known as rod anchors, they're often used with threaded rod to hang pipe and wiring.

Also known as double expansion anchors, these expand from both sides for full contact and a secure hold.

Bolts are beveled under the head for a flush finish in countersunk holes.

Also known as tap-in or uni-tap rivets, these anchors are barbed to resist pull out. Made from nylon, they're chemical resistant.

Use in applications requiring high strength.

Also known as drive rivets, install these anchors by hammering the pin into the body. Pry out the pin to remove.

A tamper-resistant nut prevents unwanted removal of the object you are anchoring.

These steel anchors are available with corrosion-resistant finishes.

These steel anchors are available with corrosion-resistant finishes.

Used with adhesive in bricks and hollow blocks, such as cinder blocks, these mesh tubes create a stronger hold for rods and studs than other anchors.

A pivoting toggle bar creates a strong hold.

Fins prevent these anchors from spinning during installation.

Use these stud-style anchors with nuts.

High-strength toggle anchors provide an extremely strong hold and stay in position when a bolt is removed.

Use these stud-style anchors with nuts.

A wing-like toggle holds against the back of the material and spreads the force over a large area to hold 30 lbs. or more.

Install these plugs into drum holes using a drum-plug wrench.

Prevent tampering with the contents of your drum while allowing access for filling.

Turn the square head of the plug into the sealing ring to close off pipe openings.

Less than a quarter of the height of standard pressure-relief valves, these are often installed on tanks in low-clearance areas.

Minimize moisture buildup in enclosures. Also known as drain plugs, these breather vents have a small outlet that allows condensation to drain.

Keep moisture, dirt, and debris from entering your oil reservoirs.

Shield outdoor pipe and tank openings from the environment. Also known as vent caps, these breather vents have screens to allow air flow while blocking debris.