Filter by
Screw Size
Sold As
Overall Length
Drive Size
Length
Grip Style
Performance
Shaft Length
Screw-Holding Mechanism
DFARS Specialty Metals
Export Control Classification Number (ECCN)
Manufacturer
Tight-Clearance Screw Starters
 |
The slim body reaches into tight spots to grip and turn screws. Use the magnet at the end of the handle to retrieve dropped fasteners. Screw starters are not intended for final tightening or removal of fasteners.
Wedge Tip—Starters with wedge tip fit a variety of drive styles. Push the sleeve on the handle forward and insert the tip into screw head. Pull the sleeve back and the tip splits to hold the screw firmly. Once threads are started, the tool releases the screw.
Twist Tip—Starters with twist tip secure in the screw head by pushing and turning the tool. As the fastener is tightened, the starter tip releases.
Drive Size | Overall Lg. | Body Dia. | Material | Screw-Holding Mechanism | Features | Each | |||
|---|---|---|---|---|---|---|---|---|---|
For Phillips, Hex, Torx, and Square Drives | |||||||||
| Phillips: No. 1, No. 2, No. 3 Hex: 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4" Torx: T10, T15, T20, T27, T30 Square: No. 1, No. 2 | 5 5/8" | 0.298" | Black-Oxide Steel | Wedge Tip | Screw Retrieval Magnet, Pocket Clip | 74265A88 | 00000 | ||
For Phillips and Slotted Drives | |||||||||
| Phillips: No. 2 Slotted: 9/32" | 6 3/4" | 0.28" | Black-Oxide Steel | Twist Tip | Pocket Clip | 58465A65 | 00000 | ||
For Phillips Drives | |||||||||
| No. 2 | 9 3/4" | 0.28" | Black-Oxide Steel | Twist Tip | Screw Retrieval Magnet | 5806A7 | 00000 | ||
For Slotted Drives | |||||||||
| 9/32" | 5 5/8" | 0.28" | Black-Oxide Steel | Twist Tip | Screw Retrieval Magnet, Pocket Clip | 5806A2 | 00000 | ||
| 9/32" | 9 5/8" | 0.28" | Black-Oxide Steel | Twist Tip | Screw Retrieval Magnet | 5806A3 | 00000 | ||
Screw Starters
 |
Grip and turn screws that are too small to hold by hand or located in hard-to-reach spots. These screw starters grab onto the recesses of the screw and hold more securely than a magnetic screwdriver. However, they’re not intended for final tightening or removal of fasteners.
Wedge Tip—Push the sleeve on the handle forward and insert the wedge tip into the screw slot. Release the sleeve and the tip splits and pushes out to hold the screw firmly.
Shaft | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
Drive Size | For Screw Size | Overall Lg. | Lg. | Overall Wd. | Material | Screw-Holding Mechanism | Each | |||
For Slotted Drives | ||||||||||
| 1/8" | No. 0, M1.6 | 5" | 3" | 1/4" | Black-Oxide Steel | Wedge Tip | 5690A27 | 00000 | ||
| 1/8" | No. 2, No. 3, No. 4, M2, M2.5 | 5" | 3" | 1/4" | Black-Oxide Steel | Wedge Tip | 5690A24 | 0000 | ||
| 1/8" | No. 2, No. 3, No. 4, M2, M2.5 | 10" | 8" | 1/4" | Black-Oxide Steel | Wedge Tip | 5690A25 | 0000 | ||
| 3/16" | No. 4, No. 5, No. 6, No. 7, M2.5, M2.6, M3, M3.5 | 4 1/2" | 2" | 7/32" | Zinc-Plated Steel | Wedge Tip | 5690A11 | 0000 | ||
| 3/16" | No. 4, No. 5, No. 6, No. 7, M2.5, M2.6, M3, M3.5 | 6 1/2" | 4" | 5/16" | Zinc-Plated Steel | Wedge Tip | 5690A12 | 00000 | ||
| 3/16" | No. 4, No. 5, No. 6, No. 7, M2.5, M2.6, M3, M3.5 | 8 1/2" | 6" | 5/16" | Zinc-Plated Steel | Wedge Tip | 5690A13 | 0000 | ||
| 3/16" | No. 4, No. 5, No. 6, No. 7, M2.5, M2.6, M3, M3.5 | 10 1/2" | 8" | 5/16" | Zinc-Plated Steel | Wedge Tip | 5690A14 | 00000 | ||
| 3/16" | No. 4, No. 5, No. 6, No. 7, M2.5, M2.6, M3, M3.5 | 14 1/2" | 12" | 5/16" | Black-Oxide Steel | Wedge Tip | 5690A15 | 00000 | ||
| 3/16" | No. 6, No. 8, No. 10, No. 12, M3.5, M4, M5 | 8" | 4" | 5/16" | Zinc-Plated Steel | Wedge Tip | 5690A16 | 00000 | ||
| 3/16" | No. 6, No. 8, No. 10, No. 12, M3.5, M4, M5 | 10" | 6" | 5/16" | Zinc-Plated Steel | Wedge Tip | 5690A17 | 00000 | ||
| 3/16" | No. 6, No. 8, No. 10, No. 12, M3.5, M4, M5 | 12" | 8" | 5/16" | Zinc-Plated Steel | Wedge Tip | 5690A18 | 00000 | ||
| 1/4" | No. 8, No. 10, No. 12, 1/4", 5/16", 3/8", M4, M5, M6, M8, M10 | 8" | 4" | 3/8" | Zinc-Plated Steel | Wedge Tip | 5690A19 | 00000 | ||
| 1/4" | No. 8, No. 10, No. 12, 1/4", 5/16", 3/8", M4, M5, M6, M8, M10 | 10" | 6" | 3/8" | Zinc-Plated Steel | Wedge Tip | 5690A21 | 00000 | ||
| 1/4" | No. 8, No. 10, No. 12, 1/4", 5/16", 3/8", M4, M5, M6, M8, M10 | 12" | 8" | 3/8" | Zinc-Plated Steel | Wedge Tip | 5690A22 | 00000 | ||
| 1/4" | No. 8, No. 10, No. 12, 1/4", 5/16", 3/8", M4, M5, M6, M8, M10 | 18" | 14" | 3/8" | Black-Oxide Steel | Wedge Tip | 5690A23 | 00000 | ||
Tight-Clearance Screw Starter Sets
 |
These assorted screw starters have a slim body that reaches into tight spots to grip and turn screws. Insert the twist tip into the screw head, push down, and turn to secure. As the screw is tightened, the starter tip releases. Use the magnet at the end of the handle to retrieve dropped fasteners. These tools are not intended for final tightening or removal of fasteners.
No. of Pieces | Includes | Body Dia. | Material | Screw-Holding Mechanism | Features | Each | |||
|---|---|---|---|---|---|---|---|---|---|
For Phillips and Slotted Drives | |||||||||
| 4 | No. 2 Phillips Screw Starter—5 3/4" O'all Lg. No. 2 Phillips Screw Starter—9 3/4" O'all Lg. 9/32" Slotted Screw Starter—5 5/8" O'all Lg. 9/32" Slotted Screw Starter—9 5/8" O'all Lg. | 0.28" | Black-Oxide Steel | Twist Tip | Screw Retrieval Magnet | 5806A22 | 000000 | ||
Screw-Holding Screwdrivers
 |
 |  |
Sleeve | Ball Detent |
 | |
Wedge Tip |
When you've only got one free hand to fasten, reach for these screwdrivers. They're useful when working in tight spaces or above crevices that screws could slip into.
Premium—The best screwdrivers available, with tips machined to tight tolerances for the tightest possible fit in fastener recesses. The snug fit means they'll turn screws quickly without wearing screw heads and the driver's tip.
Standard Length—The most common screwdriver length for a specific drive size.
Long—An extended shaft turns screws in deep recesses other screwdrivers can't reach.
Sleeve—Designed to hold screws firmly against the tip of the screwdriver. The spring-loaded sleeve slides over a screw head and locks it in place. Once you’ve lined up the screw, release it with a button on the shaft before tightening.
Ball Detent and Wedge Tip—Create just enough friction inside the recess to keep the screw from dropping.
Shaft | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
Drive Size | Relative Lg. | Overall Lg. | Lg. | Overall Wd. | Max. Access Angle | Screw-Holding Mechanism | Material | Mfr. | Each | |||
Phillips | ||||||||||||
Premium | ||||||||||||
| No. 0 | Long | 8 3/4" | 5" | 7/16" | — | Sleeve | Black-Oxide Steel | Greenlee | 55505A44 | 000000 | ||
| No. 1 | Long | 8 3/4" | 5" | 7/16" | — | Sleeve | Black-Oxide Steel | Greenlee | 55505A49 | 00000 | ||
| No. 2 | Long | 11 1/2" | 7" | 9/16" | — | Sleeve | Black-Oxide Steel | Greenlee | 55505A51 | 00000 | ||
Slotted | ||||||||||||
Premium | ||||||||||||
| 1/8" | Long | 8 3/4" | 5" | 7/16" | — | Sleeve | Black-Oxide Steel | Greenlee | 55505A45 | 00000 | ||
| 3/16" | Long | 10 3/4" | 6" | 1/2" | — | Sleeve | Black-Oxide Steel | Greenlee | 55505A47 | 00000 | ||
| 1/4" | Long | 11 1/2" | 7" | 9/16" | — | Sleeve | Black-Oxide Steel | Greenlee | 55505A48 | 00000 | ||
Hex | ||||||||||||
Premium | ||||||||||||
| 0.050" | Standard | 4 1/8" | 2 3/8" | 1/16" | 25° | Ball Detent | Phosphate-Coated Steel | Bondhus | 55505A25 | 0000 | ||
| 1/16" | Standard | 4 11/16" | 2 1/2" | 1/16" | 25° | Ball Detent | Phosphate-Coated Steel | Bondhus | 55505A26 | 0000 | ||
| 5/64" | Standard | 4 13/16" | 2 5/8" | 5/64" | 25° | Ball Detent | Phosphate-Coated Steel | Bondhus | 55505A27 | 0000 | ||
| 3/32" | Standard | 5 3/16" | 2 13/16" | 3/32" | 25° | Ball Detent | Phosphate-Coated Steel | Bondhus | 55505A28 | 0000 | ||
| 7/64" | Standard | 5 5/16" | 2 7/8" | 7/64" | 25° | Ball Detent | Phosphate-Coated Steel | Bondhus | 55505A29 | 0000 | ||
| 1/8" | Standard | 6 5/8" | 3 1/8" | 1/8" | 25° | Ball Detent | Phosphate-Coated Steel | Bondhus | 55505A31 | 0000 | ||
| 9/64" | Standard | 6 13/16" | 3 5/16" | 9/64" | 25° | Ball Detent | Phosphate-Coated Steel | Bondhus | 55505A32 | 0000 | ||
| 5/32" | Standard | 7 7/8" | 3 5/8" | 5/32" | 25° | Ball Detent | Phosphate-Coated Steel | Bondhus | 55505A33 | 0000 | ||
| 3/16" | Standard | 8" | 3 11/16" | 3/16" | 25° | Ball Detent | Phosphate-Coated Steel | Bondhus | 55505A34 | 0000 | ||
| 7/32" | Standard | 9" | 4 3/16" | 7/32" | 25° | Ball Detent | Phosphate-Coated Steel | Bondhus | 55505A35 | 0000 | ||
| 1/4" | Standard | 9 13/16" | 4 11/16" | 1/4" | 25° | Ball Detent | Phosphate-Coated Steel | Bondhus | 55505A36 | 0000 | ||
| 5/16" | Standard | 10 3/8" | 5 5/8" | 5/16" | 25° | Ball Detent | Phosphate-Coated Steel | Bondhus | 55505A37 | 0000 | ||
| 3/8" | Standard | 11 5/16" | 6 1/2" | 3/8" | 25° | Ball Detent | Phosphate-Coated Steel | Bondhus | 55505A38 | 00000 | ||
| 1.27 mm | Standard | 4 1/8" | 2 3/8" | 1/16" | 25° | Ball Detent | Phosphate-Coated Steel | Bondhus | 55505A39 | 0000 | ||
| 1.5 mm | Standard | 4 11/16" | 2 5/8" | 1/16" | 25° | Ball Detent | Phosphate-Coated Steel | Bondhus | 55505A41 | 0000 | ||
| 2 mm | Standard | 5" | 2 13/16" | 3/32" | 25° | Ball Detent | Phosphate-Coated Steel | Bondhus | 55505A42 | 0000 | ||
| 2.5 mm | Standard | 5 1/8" | 2 11/16" | 3/32" | 25° | Ball Detent | Phosphate-Coated Steel | Bondhus | 55505A53 | 0000 | ||
| 3 mm | Standard | 6 11/16" | 3 5/16" | 1/8" | 25° | Ball Detent | Phosphate-Coated Steel | Bondhus | 55505A54 | 0000 | ||
| 4 mm | Standard | 8 1/8" | 3 11/16" | 5/32" | 25° | Ball Detent | Phosphate-Coated Steel | Bondhus | 55505A55 | 0000 | ||
| 5 mm | Standard | 8 5/8" | 4 5/16" | 3/16" | 25° | Ball Detent | Phosphate-Coated Steel | Bondhus | 55505A56 | 0000 | ||
| 6 mm | Standard | 10 3/16" | 5 3/8" | 1/4" | 25° | Ball Detent | Phosphate-Coated Steel | Bondhus | 55505A57 | 0000 | ||
| 8 mm | Standard | 11 3/16" | 6 3/8" | 5/16" | 25° | Ball Detent | Phosphate-Coated Steel | Bondhus | 55505A58 | 0000 | ||
| 10 mm | Standard | 12" | 7 5/16" | 3/8" | 25° | Ball Detent | Phosphate-Coated Steel | Bondhus | 55505A59 | 00000 | ||
Torx | ||||||||||||
Premium | ||||||||||||
| T8 | Standard | 5 9/16" | 2 3/8" | 1/8" | — | Wedge Tip | Nickel-Plated Steel | Wera | 55505A11 | 0000 | ||
| T9 | Standard | 5 9/16" | 2 3/8" | 5/32" | — | Wedge Tip | Nickel-Plated Steel | Wera | 55505A12 | 0000 | ||
| T10 | Standard | 6 5/16" | 3 1/8" | 5/32" | — | Wedge Tip | Nickel-Plated Steel | Wera | 55505A13 | 0000 | ||
| T15 | Standard | 7" | 3 1/8" | 5/32" | — | Wedge Tip | Nickel-Plated Steel | Wera | 55505A14 | 0000 | ||
| T20 | Standard | 7 13/16" | 4" | 5/32" | — | Wedge Tip | Nickel-Plated Steel | Wera | 55505A15 | 0000 | ||
| T20 | Long | 15 5/8" | 12" | 5/32" | — | Wedge Tip | Nickel-Plated Steel | Wera | 55505A16 | 00000 | ||
| T25 | Standard | 8" | 4" | 3/16" | — | Wedge Tip | Nickel-Plated Steel | Wera | 55505A17 | 0000 | ||
| T25 | Long | 16" | 12" | 1/4" | — | Wedge Tip | Nickel-Plated Steel | Wera | 55505A18 | 00000 | ||
| T27 | Standard | 8 5/8" | 4 9/16" | 7/32" | — | Wedge Tip | Nickel-Plated Steel | Wera | 55505A19 | 0000 | ||
| T27 | Long | 16" | 12" | 1/4" | — | Wedge Tip | Nickel-Plated Steel | Wera | 55505A21 | 00000 | ||
| T30 | Standard | 8 5/8" | 4 9/16" | 1/4" | — | Wedge Tip | Nickel-Plated Steel | Wera | 55505A22 | 00000 | ||
| T30 | Long | 16" | 12" | 1/4" | — | Wedge Tip | Nickel-Plated Steel | Wera | 55505A23 | 00000 | ||
| T40 | Standard | 9 1/2" | 5 3/16" | 9/32" | — | Wedge Tip | Nickel-Plated Steel | Wera | 55505A24 | 00000 | ||
Nut Starters
 |  |
Start and initially turn nuts in hard-to-reach spots. Insert closed jaws at the tip into the nut, then pull the sleeve back to open the jaws and grip. The starter releases from the nut as the threads are engaged. These tools are not intended for final tightening or removal of fasteners.
For Thread Size | Overall Lg. | Body Dia. | Color | Material | Handle Material | Fastener-Holding Mechanism | Features | Each | |||
|---|---|---|---|---|---|---|---|---|---|---|---|
For External Hex Drives | |||||||||||
| 4-40 to 5/16"-32 | 5" | 0.315" | Silver | Steel | Aluminum | Jaws | Pocket Clip | 5738A62 | 000000 | ||
Screw Starter Sets
 |
Keep an assortment of screw starters on hand to grip and turn screws that are too small to hold by hand or located in hard-to-reach spots. They grab onto the recesses of the screw and hold more securely than a magnetic screwdriver. However, they’re not intended for final tightening or removal of fasteners.
Wedge Tip—Push the sleeve on the handle forward and insert the wedge tip into the screw slot. Release the sleeve and the tip splits and pushes out to hold the screw firmly.
No. of Pieces | Includes | Material | Screw-Holding Mechanism | Container Type | Each | |||
|---|---|---|---|---|---|---|---|---|
For Slotted Drives | ||||||||
| 4 | 1/8" Slotted Screw Starter—5" O'all Lg. 3/16" Slotted Screw Starter—6 1/2" O'all Lg. 3/16" Slotted Screw Starter—8" O'all Lg. 1/4" Slotted Screw Starter—10" O'all Lg. | Black-Oxide Steel | Wedge Tip | Plastic Rack | 5690A26 | 000000 | ||
| 7 | 1/8" Slotted Screw Starter—5" O'all Lg. 3/16" Slotted Screw Starter—6 1/2" O'all Lg. 3/16" Slotted Screw Starter—8" O'all Lg. 3/16" Slotted Screw Starter—8 1/2" O'all Lg. 3/16" Slotted Screw Starter—10" O'all Lg. 3/16" Slotted Screw Starter—12" O'all Lg. 1/4" Slotted Screw Starter—10" O'all Lg. | Black-Oxide Steel | Wedge Tip | — | 5690A61 | 00000 | ||
Electrical Insulating Screw Starters
 |
An insulated handle and body protect against shock from accidental contact with live electrical circuits. These tools are tested to 1,000 volts to meet IEC 60900. Insert the twist tip into the screw head, push down, and turn to secure. As the screw is tightened, the starter tip releases. Use the magnet at the end of the handle to retrieve dropped fasteners. Screw starters are not intended for final tightening or removal.
Drive Size | Overall Lg. | Body Dia. | Material | Handle Material | Screw-Holding Mechanism | Specs. Met | Each | |||
|---|---|---|---|---|---|---|---|---|---|---|
For Phillips Drives | ||||||||||
| No. 1, No. 2 | 6" | 0.236" | Steel | Plastic | Twist Tip | IEC 60900 | 7437A34 | 0000000 | ||
| No. 1, No. 2 | 10" | 0.394" | Steel | Plastic | Twist Tip | IEC 60900 | 7437A35 | 000000 | ||
For Slotted Drives | ||||||||||
| 1/4" | 6" | 0.236" | Steel | Plastic | Twist Tip | IEC 60900 | 7437A32 | 000000 | ||
Screw Hole Starters
 |
Shank Dia. | Shank Lg. | Overall Lg. | Tapered Screw Point Lg. | Blade Material | Handle Material | Each | ||
|---|---|---|---|---|---|---|---|---|
| 1/4" | 3" | 8" | 9/16" | Steel | Plastic | 5352A11 | 00000 |
Screw-Holding Precise-Control Screwdriver Sets
 |
Keep even the smallest screws from falling into cracks. A magnet at the tip grips fasteners tightly, so you don't have to fumble with your fingers. These sets are perfect for delicate tasks that require nimble, fine-tuned adjustments. Push the end of the handle to open the jaws, then release to lock the jaws around the screw head.
Premium—The best screwdrivers available, with tips machined to tight tolerances for the tightest possible fit in fastener recesses. The snug fit means they'll turn screws quickly without wearing screw heads and the driver's tip.
No. of Pieces | Includes | Material | Screw-Holding Mechanism | Container Type | Mfr. | Each | |||
|---|---|---|---|---|---|---|---|---|---|
Phillips | |||||||||
Premium | |||||||||
| 5 | No. 000 Phillips Shaft—4" O'all Lg. No. 00 Phillips Shaft—4" O'all Lg. No. 0 Phillips Shaft—4" O'all Lg. No. 1 Phillips Shaft—4" O'all Lg. Screwdriver Handle | Black-Oxide Steel | Magnet | Plastic Pouch | Moody Tools | 8550A63 | 000000 | ||
Slotted | |||||||||
Premium | |||||||||
| 7 | 0.025" Slotted Shaft—4" O'all Lg. 0.040" Slotted Shaft—4" O'all Lg. 0.055" Slotted Shaft—4" O'all Lg. 0.070" Slotted Shaft—4" O'all Lg. 0.080" Slotted Shaft—4" O'all Lg. 0.100" Slotted Shaft—4" O'all Lg. Screwdriver Handle | Black-Oxide Steel | Magnet | Plastic Pouch | Moody Tools | 8550A62 | 00000 | ||
Phillips and Slotted | |||||||||
Premium | |||||||||
| 6 | No. 0 Phillips Shaft—4" O'all Lg. No. 1 Phillips Shaft—4" O'all Lg. 0.055" Slotted Shaft—4" O'all Lg. 0.070" Slotted Shaft—4" O'all Lg. 0.100" Slotted Shaft—4" O'all Lg. Screwdriver Handle | Black-Oxide Steel | Magnet | Plastic Pouch | Moody Tools | 8550A54 | 00000 | ||
Screw-Holding Screwdriver Sets
|  |  |
Ball Detent | Wedge Tip |
No. of Pieces | Includes | Max. Access Angle | Screw-Holding Mechanism | Material | Container Type | Mfr. | Each | |||
|---|---|---|---|---|---|---|---|---|---|---|
Hex | ||||||||||
Premium | ||||||||||
| 6 | 1.5 mm Hex Screwdriver—4 11/16" O'all Lg. 2 mm Hex Screwdriver—5" O'all Lg. 2.5 mm Hex Screwdriver—5 1/8" O'all Lg. 3 mm Hex Screwdriver—6 11/16" O'all Lg. 4 mm Hex Screwdriver—8 1/8" O'all Lg. 5 mm Hex Screwdriver—8 5/8" O'all Lg. | 25° | Ball Detent | Phosphate-Coated Steel | Plastic Pouch | Bondhus | 9694N15 | 000000 | ||
| 8 | 0.050" Hex Screwdriver—4 1/8" O'all Lg. 1/16" Hex Screwdriver—4 11/16" O'all Lg. 5/64" Hex Screwdriver—4 13/16" O'all Lg. 3/32" Hex Screwdriver—5 3/16" O'all Lg. 7/64" Hex Screwdriver—5 5/16" O'all Lg. 1/8" Hex Screwdriver—6 5/8" O'all Lg. 9/64" Hex Screwdriver—6 13/16" O'all Lg. 5/32" Hex Screwdriver—7 7/8" O'all Lg. | 25° | Ball Detent | Phosphate-Coated Steel | Plastic Pouch | Bondhus | 9694N14 | 00000 | ||
| 9 | 1.5 mm Hex Screwdriver—4 3/4" O'all Lg. 2 mm Hex Screwdriver—5" O'all Lg. 2.5 mm Hex Screwdriver—5 1/8" O'all Lg. 3 mm Hex Screwdriver—6 3/4" O'all Lg. 4 mm Hex Screwdriver—8 1/4" O'all Lg. 5 mm Hex Screwdriver—8 3/4" O'all Lg. 6 mm Hex Screwdriver—10 1/4" O'all Lg. 8 mm Hex Screwdriver—11 1/4" O'all Lg. 10 mm Hex Screwdriver—12 1/4" O'all Lg. | 20° | Ball Detent | Phosphate-Coated Steel | Plastic Pouch | Bondhus | 5691A1 | 00000 | ||
| 13 | 0.050" Hex Screwdriver—4 1/8" O'all Lg. 1/16" Hex Screwdriver—4 3/4" O'all Lg. 5/64" Hex Screwdriver—4 7/8" O'all Lg. 3/32" Hex Screwdriver—5 1/4" O'all Lg. 7/64" Hex Screwdriver—5 3/8" O'all Lg. 1/8" Hex Screwdriver—6 5/8" O'all Lg. 9/64" Hex Screwdriver—6 7/8" O'all Lg. 5/32" Hex Screwdriver—8" O'all Lg. 3/16" Hex Screwdriver—8" O'all Lg. 7/32" Hex Screwdriver—9" O'all Lg. 1/4" Hex Screwdriver—10" O'all Lg. 5/16" Hex Screwdriver—10 1/2" O'all Lg. 3/8" Hex Screwdriver—11 1/2" O'all Lg. | 20° | Ball Detent | Phosphate-Coated Steel | Plastic Pouch | Bondhus | 5691A2 | 00000 | ||
Torx | ||||||||||
Premium | ||||||||||
| 4 | T20 Torx Screwdriver—15 5/8" O'all Lg. T25 Torx Screwdriver—16" O'all Lg. T27 Torx Screwdriver—16" O'all Lg. T30 Torx Screwdriver—16" O'all Lg. | — | Wedge Tip | Nickel-Plated Steel | Plastic Rack | Wera | 9694N11 | 00000 | ||
| 6 | T10 Torx Screwdriver—6 5/16" O'all Lg. T15 Torx Screwdriver—7" O'all Lg. T20 Torx Screwdriver—7 13/16" O'all Lg. T25 Torx Screwdriver—8" O'all Lg. T30 Torx Screwdriver—8 5/8" O'all Lg. T40 Torx Screwdriver—9 1/2" O'all Lg. | — | Wedge Tip | Nickel-Plated Steel | Plastic Rack | Wera | 9694N12 | 00000 | ||
| 7 | T8 Torx Screwdriver—5 9/16" O'all Lg. T10 Torx Screwdriver—6 5/16" O'all Lg. T15 Torx Screwdriver—7" O'all Lg. T20 Torx Screwdriver—7 13/16" O'all Lg. T25 Torx Screwdriver—8" O'all Lg. T27 Torx Screwdriver—16" O'all Lg. T30 Torx Screwdriver—8 5/8" O'all Lg. | — | Wedge Tip | Nickel-Plated Steel | Plastic Rack | Wera | 9694N13 | 00000 | ||
