Made of Nitronic 60 stainless steel, these inserts prevent the screw from binding or sticking without any coating or lubricant that could contaminate particle-free environments.

Eliminating the need for primer, these inserts are coated to resist corrosion when installed in different materials.

Made of nickel alloy, these inserts are more resistant to acids and salt water than stainless steel inserts.

A dry film keeps the screw from sticking or binding in these inserts during installation.

Without a prong to break off and retrieve, these inserts are often used where debris could cause damage.

A distorted thread grips the screw to resist loosening.

Inserts come with a through-hole tap and installation tool.

These kits have short-, normal-, and long-reach inserts, an installation tool, and a tap.

Made of 18-8 stainless steel, these inserts have good corrosion resistance.

The strongest key-locking inserts we offer, these inserts are made to stringent military specifications.

The strongest and most corrosion-resistant stainless steel key-locking inserts we offer. Made of A286 stainless steel, these inserts stand up to salt water, harsh chemicals, and even high temperatures.

These inserts come with an installation tool. Drive the keys into the surrounding material for a more secure hold than thread-locking inserts.

Tap the thread size you need into the solid body of these blanks. Made of steel, they’re stronger than stainless steel insert blanks.

Made of 18-8 stainless steel, these inserts have better corrosion resistance than black-phosphate steel.

A closed-end tap, drill bit, and installation bit are included with these inserts.

These assortments include various sizes of thread-locking inserts.

With the male threaded end on these inserts, mount components directly to plastic parts.

The tapered shape makes it easier to guide these inserts into a hole during installation. Use a drill bit to create a straight hole, then taper the top half.

Tapered on one end, these inserts are easy to guide into a hole during installation. The threaded rod on the other end creates an attachment point for components on plastic parts.

These 18-8 stainless steel inserts have better corrosion resistance than brass inserts and may be mildly magnetic.

These 18-8 stainless steel inserts have better corrosion resistance than brass inserts and may be mildly magnetic.

These aluminum inserts are 70% lighter than brass inserts, electrically conductive, and nonmagnetic. They have good corrosion resistance, which is comparable to brass but not as good as stainless steel.

Fins cut into the surrounding material for a more secure hold than knurled inserts. Made from brass, they’re nonmagnetic, corrosion resistant, and electrically conductive.

These 18-8 stainless steel inserts have better corrosion resistance than aluminum inserts and may be mildly magnetic.

The barbed sides keep these securely in place even before a screw is installed.

Push down on the inside of these inserts with an installation tool and they expand to hold firm in surrounding material.

Add threads that resist twisting and pulling more than standard mold-in inserts. These inserts have a six-pointed shape and ridges that give ample surface area for contacting the plastic, so they’re strong and sturdy.

Steel inserts have high strength for durability.

Assortments include various sizes of tapping inserts for hardwood.

The flange keeps these inserts from being pulled through a hole and provides a load bearing surface.

These 18-8 stainless steel tee nut inserts have better corrosion resistance than zinc-plated steel tee nut inserts.

Create strong threads in wood and plastic that won’t get clogged with paint or debris. These tee nut inserts have a protective plug on bottom to block out substances during finishing processes.

Ridges on the barrel of these inserts make them less likely to split hardwood than inserts with prongs. They're often used in wood that has been cut across the growth rings.

Hammer corrosion-resistant threads into pine, spruce, and other softwoods—these inserts have six prongs around the barrel for a strong hold that prevents them from twisting and loosening.

Hooked prongs give these inserts excellent holding power even when removing screws.

An open end allows long screws and bolts to pass through the insert.

Knurls hold these inserts in hardwoods such as oak, maple, and walnut to prevent twisting.

Press these inserts into a drilled hole and the flexible metal teeth anchor them in the material. Use them with carbon fiber, fiberglass, and garolite.

To block out moisture and resist corrosion in wet environments, these steel rivet nuts have a PVC plastic flange and a zinc-plated body. Install them in sheet metal with only a screw, no special tools required.

These aluminum rivet nuts are one-third the weight of steel rivet nuts and have mild corrosion resistance.

Made of 18-8 stainless steel, these rivet nuts withstand water, mild chemicals, and outdoor conditions better than zinc-plated steel nuts. A ribbed body grips surrounding material to hold them in place, keeping them from spinning as you tighten screws.

Irregularly shaped threads in these nuts form a tight grip, preventing screws from backing out in vibration-heavy environments.

A ribbed body on these rivet nuts and wedges under the flange bite into soft materials such as brass, aluminum, and composites to prevent spinning when you tighten a screw.

With an angled head, these rivet nuts sit flush in countersunk holes.

Made of stainless steel, these rivet nuts hold up better outdoors than zinc-plated steel rivet nuts.

The most corrosion resistant low-profile rivet nuts we offer, these stand up to chemicals.

About twice as strong as aluminum rivet nuts, these low-profile rivet nuts have a cadmium or tin-zinc plating for corrosion resistance.

To grip all layers of a sandwich panel—the top, core, and bottom—these rivet nuts have a two-piece construction.

A nonconductive rubber coating insulates the nut from electricity, seals out moisture, and damps vibration.

The closed end on these nuts keeps debris from passing through the nut or damaging the threads.

Threads float inside the nut so you can install a screw at a slight angle to align with off-center parts. They’re also known as Riv-Float nuts.

Create permanent, corrosion-resistant threads in sheet metal without the setup and mess of weld nuts.

The strongest and hardest press-fit nuts we offer. In addition to their sturdiness, these A286 stainless steel nuts withstand harsh chemicals.

Add permanent metric threads to sheet metal, like weld nuts, but without the setup and mess. A zinc plating on these steel press-fit nuts provides corrosion resistance in wet environments.

Add lightweight, corrosion-resistant threads to sheet metal.

Thanks to their covered threads, these press-fit nuts protect against leaks and debris. They have a zinc plating to prevent them from rusting in wet environments.

A nylon insert in these press-fit locknuts grips threads to prevent screws from loosening while knurls on the bottom hold these locknuts firmly in place.

Align off-center parts as you fasten them together—these steel press-fit nuts have floating threads, so you can install bolts at a slight angle.

Irregularly shaped threads in these press-fit nuts form a tight grip, preventing screws from backing out in vibration-heavy environments. Use these nuts to install corrosion-resistant threads that align with off-center parts.

Create corrosion-resistant threads in soft metal and plastic panels—these stainless steel press-fit nuts withstand exposure to water and chemicals.