Filter by
For Use On
Stroke Speed Adjustability
Strokes per Minute
Export Control Classification Number (ECCN)
Adjustability
DFARS Specialty Metals
Electrical Connection
Certification
Performance
Lightweight Electric Engravers with Steel, Carbide, and Diamond Tips
 |
Made of aluminum, this pen-shaped engraver is lightweight to reduce writing strain. It has two speed settings for controlling the depth of your marks.
Carbide Tip—Carbide tip is for general purpose engraving.
Steel Tip—Steel tip is for engraving plastic.
Diamond Tip—Diamond tip allows you to engrave extra-hard materials such as stone, ceramic, and hard metal.
Electrical | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Stroke Speed Adjustability | Strokes per min., stroke/min | Current, amp | Voltage, V AC | Wt., lb. | Tip Style | Tip Material | Carbide For Use On | Steel For Use On | Diamond For Use On | Connection | No. of Blades | Cord Lg., ft. | Each | ||
| Adjustable | 7,200 | 0.1 | 120 | 0.6 | Pointed | Carbide, Steel, Diamond | Acrylic Plastic, Aluminum, Brass, Bronze, Copper, Iron, Lead, Nickel, Rubber, Stainless Steel, Tin, Wood | Acrylic Plastic, Rubber | Ceramic, Glass, Phenolic, Steel, Stone | Straight Blade | 2 | 6 | 0000000 | 0000000 | |
Electric Engravers with Carbide and Diamond Tips
 |
Use the knob on the side to adjust speed and control the depth of your marks.
Carbide Tip—Carbide tip is for general purpose engraving.
Diamond Tip—Diamond tip allows you to engrave extra-hard materials such as stone, ceramic, and hard metal.
Electrical | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Stroke Speed Adjustability | Strokes per min., stroke/min | Current, amp | Voltage, V AC | Wt., lb. | Tip Style | Tip Material | Carbide For Use On | Diamond For Use On | Connection | No. of Blades | Cord Lg., ft. | Certification | Includes | Each | ||
| Adjustable | 7,200 | 0.2 | 120 | 0.8 | Pointed | Carbide, Diamond | Acrylic Plastic, Aluminum, Brass, Bronze, Copper, Iron, Lead, Nickel, Rubber, Stainless Steel, Tin, Wood | Ceramic, Glass, Phenolic, Steel, Stone | Straight Blade | 2 | 5 | UL Listed | Letter and Number Stencil Set: One each of 0-9, A-Z, Forward Slash (/), and Dash (-) | 000000 | 000000 | |
Air-Powered Engravers with Carbide Tip
 |  |
Fixed Speed | Adjustable Speed |
Connect these engravers to a compressed air line. Higher strokes per minute means they cut more smoothly than electric engravers.
Adjustable Stroke Speed—Engraver with adjustable speed allows you to modify the airflow so you can select the power to best suit your application.
Engravers | Replacement Engraver Tips | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Hose | |||||||||||||||
Stroke Speed Adjustability | Strokes per min., stroke/min | Flow Rate @ Pressure | ID | Lg., ft. | Gender | Pipe Size | Thread Type | Wt., lb. | Tip Style | For Use On | Each | Each | |||
| Fixed | 30,000 | 1.1 ft³/min @ 90 psi | 1/8" | 6 | Female | 1/4 | NPT | 0.3 | Pointed | Acrylic Plastic, Aluminum, Brass, Bronze, Copper, Iron, Lead, Nickel, Rubber, Stainless Steel, Tin, Wood | 0000000 | 0000000 | 0000000 | 0000000 | |
| Adjustable | 13,500 | 1.1 ft³/min @ 90 psi | 3/16" | 8 | Male | 1/4 | NPT | 0.3 | Pointed | Acrylic Plastic, Aluminum, Brass, Bronze, Copper, Iron, Lead, Nickel, Rubber, Stainless Steel, Tin, Wood | 0000000 | 000000 | ——— | 0 | |
 |  |  |  |
Pointed Tip | Flat Tip | Angled Chisel Tip | Flat Chisel Tip |
Tip | |||||
|---|---|---|---|---|---|
Material | Style | For Use On | Each | ||
| Carbide | Pointed | Acrylic Plastic, Aluminum, Brass, Bronze, Copper, Iron, Lead, Nickel, Rubber, Stainless Steel, Tin, Wood | 0000000 | 000000 | |
| Steel | Flat | Acrylic Plastic, Rubber | 0000000 | 00000 | |
| Steel | Angled Chisel | Acrylic Plastic, Rubber | 0000000 | 00000 | |
| Steel | Flat Chisel | Acrylic Plastic, Rubber | 0000000 | 000000 | |
Electric Engravers with Carbide Tip
|
Use the knob on the side to adjust speed and control the depth of your marks.
Electrical | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Stroke Speed Adjustability | Strokes per min., stroke/min | Current, amp | Voltage, V AC | Wt., lb. | Tip Style | For Use On | Connection | No. of Blades | Cord Lg., ft. | Certification | Includes | Each | ||
| Adjustable | 7,200 | 0.2 | 120 | 0.8 | Pointed | Acrylic Plastic, Aluminum, Brass, Bronze, Copper, Iron, Lead, Nickel, Rubber, Stainless Steel, Tin, Wood | Straight Blade | 2 | 5 | UL Listed | Letter and Number Stencil Set: One each of 0-9, A-Z, Forward Slash (/), and Dash (-) | 000000 | 000000 | |
Air-Powered Engraver Kits with Steel and Carbide Tips
 |  |
Tip Holder |
Includes an engraver, four interchangeable tips, a tip holder, an air filter, and a portable case. Connect these engravers to a compressed air line. Higher strokes per minute means they cut more smoothly than electric engravers.
Angled-Chisel Tip—Angled chisel tip is used for cleaning weld beads. Requires tip holder for operation.
Flat Tip—Flat tip can be ground to a shape that suits your application. Requires tip holder for operation.
Flat-Chisel Tip—Flat chisel tip works well for scaling and deburring. Requires tip holder for operation.
Hose | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Stroke Speed Adjustability | Strokes per min., stroke/min | Flow Rate @ Pressure | ID | Lg., ft. | Gender | Thread Type | Pipe Size | Wt., lb. | Tip Material | Carbide Tip Style | Steel Tip Style | Carbide For Use On | Steel For Use On | Includes | Each | ||
| Adjustable | 13,500 | 1.1 ft³/min @ 90 psi | 3/16" | 8 | Male | NPT | 1/4 | 0.3 | Carbide, Steel | Pointed | Angled Chisel, Flat, Flat Chisel | Acrylic Plastic, Aluminum, Brass, Bronze, Copper, Iron, Lead, Nickel, Rubber, Stainless Steel, Tin, Wood | Acrylic Plastic, Rubber | Air Filter, Carrying Case, Tip Holder | 0000000 | 0000000 | |
| | | |
Pointed Tip | Flat Tip | Angled Chisel Tip | Flat Chisel Tip |
Tip | |||||
|---|---|---|---|---|---|
Material | Style | For Use On | Each | ||
| Carbide | Pointed | Acrylic Plastic, Aluminum, Brass, Bronze, Copper, Iron, Lead, Nickel, Rubber, Stainless Steel, Tin, Wood | 0000000 | 000000 | |
| Steel | Flat | Acrylic Plastic, Rubber | 0000000 | 00000 | |
| Steel | Angled Chisel | Acrylic Plastic, Rubber | 0000000 | 00000 | |
| Steel | Flat Chisel | Acrylic Plastic, Rubber | 0000000 | 000000 | |
Reducing Engravers
 |
Make quick, precise marks of varying sizes. As you trace stencils with one end of the engraving arm, the other end engraves them into your surface. Also known as pantographs, these engravers create reduced and one-to-one character sizes to fit your workpiece. The rotating cutter spindle allows for detailed work and smooth lines.
Engraver comes with a brass letter and number stencil set that can be used to create 25 different character heights. Includes 0-9, A-Z, 30 spacers, and a punctuation set of &, period, comma, dash, apostrophe, quotation marks, colon, and semicolon.
Carbide Tip—Use the carbide tip to rout plastic so the core color is revealed.
Max. Engraving | Tracing Platform | Overall | Tip | Electrical | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Stroke Speed Adjustability | Strokes per min., stroke/min | Voltage, V AC | Wd. | Lg. | Wd. | Lg. | For Max. Material Thk. | Engraving Ratio Range | Ht. | Wd. | Dp. | Wd. (Material) | Style | Carbide For Use On | Diamond For Use On | Connection | No. of Blades | Each | ||
| Fixed | 18,000 | 120 | 5" | 9 1/2" | 6" | 16" | 1 3/4" | 1:1 to 7:1 | 13" | 16" | 18" | 0.02" (Carbide) 0.03" (Carbide) 0.02" (Diamond) | Pointed | Acrylic Plastic, Rubber, Wood | Ceramic, Glass, Phenolic, Steel, Stone | Straight Blade | 3 | 00000000 | 000000000 | |
Arc Engravers
 |
Melt surface material and create marks without vibration. Write with the metal tip like a pencil. A knob allows you to control the depth and width of the marks. Welding goggles are recommended for use with these machines.
Carbide Tip—Carbide tips resist wear better than the copper tip.
Engravers | Replacement Engraver Cords | ||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Ouput | Overall | Electrical | |||||||||||||||||||||
No. of Heat Levels | Power, W | Voltage, V AC | Input Voltage, V AC | Ht. | Wd. | Dp. | Copper Tip Style | Carbide Tip Style | Tip Material | Carbide Tip Size | Copper Tip Size | For Use On | Stylus Cord Lg., ft. | Handle Material | Connection | No. of Blades | Cord Lg., ft. | Includes | Each | Each | |||
| 12 | 1,500 | 2.7 | 120 | 8" | 6" | 8" | Pointed | Pointed | Carbide, Copper | Medium, Bold | Medium | Iron, Stainless Steel, Steel | 3 1/2 | Rubber | Straight Blade | 3 | 6 | Grounding Cord with Clips, Transformer | 000000 | 000000000 | 0000000 | 0000000 | |
| 15 | 1,500 | 2.7 | 120 | 8" | 6" | 8" | Pointed | Pointed | Carbide, Copper | Medium, Bold | Medium | Iron, Stainless Steel, Steel | 3 1/2 | Rubber | Straight Blade | 3 | 6 | Grounding Cord with Clips, Transformer | 000000 | 00000000 | 0000000 | 000000 | |
High-Strength Arc Engravers
 |
More voltage allows you to engrave on heavy scale and rusted metal. Melt surface material and create marks without vibration. Write with the metal tip like a pencil. A knob allows you to control the depth and width of the marks. Welding goggles are recommended for use with this machine.
Carbide Tip—Carbide tips resist wear better than the copper tip.
Ouput | Overall | Electrical | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
No. of Heat Levels | Power, W | Voltage, V AC | Input Voltage, V AC | Ht. | Wd. | Dp. | Copper Tip Style | Carbide Tip Style | Tip Material | Carbide Tip Size | Copper Tip Size | For Use On | Stylus Cord Lg., ft. | Handle Material | Connection | No. of Blades | Cord Lg., ft. | Includes | Each | ||
| 30 | 2,500 | 4.3 | 120 | 10" | 8" | 10" | Pointed | Pointed | Carbide, Copper | Medium, Bold | Medium, Bold | Iron, Stainless Steel, Steel | 5 | Rubber | Straight Blade | 3 | 6 | Grounding Cord with Clips, Transformer | 0000000 | 000000000 | |
