These aluminum switches are rated NEMA 4, NEMA 13, and IP66 for protection from washdowns and oil/coolant spraying. Housed in a yellow enclosure for quick identification, they immediately cut power with a single push. They meet EN 60947-5-1 for compliance with European machine directives for emergency stop applications. All have positive force contacts that will open a circuit when actuated even if a spring fails or the contacts stick. UL listed and CSA certified, they also meet American and Canadian safety standards. The front of these switches is UL recognized.

Key reset switches stop you from accidentally resetting the switch before you’ve dealt with the emergency. They’re keyed alike, meaning they all open with the same key.

Illuminated switches include a bulb. If wiring the switch and the bulb to the same circuit, the circuit voltage must not exceed bulb voltage.

A red light flashes when the actuator is pushed, making it easy to see from a distance. These switches immediately cut power with a single push. They're housed in a protective yellow enclosure for quick identification. All have positive force contacts that will open a circuit when actuated even if a spring fails or the contacts stick. They're rated IP65 for protection from water projected by a nozzle.

Note: If wiring the switch and the bulb to the same circuit, the circuit voltage must not exceed bulb voltage.

Auxiliary contacts allow you to add a signaling device or control another switch.

A protective plastic enclosure resists dents, chips, and cracks, so you can install these switches outside of panels. Mount them on a wall, for example, or tether them to a cord at your workstation. They actuate with a push for quick stops and starts. All are NEMA and IP rated to protect against corrosion, washdowns, and oil/coolant spraying. All have knockouts or integrated conduit connections to make it easy to attach conduit or add cord grips.

Flush buttons are easy to clean and difficult to damage because they mount flat.

Mushroom buttons stick out and are often used to stop equipment because they are easy to push.

Switches rated IP67 can also be submerged. Switches rated IP69K can also withstand high-pressure washdowns. Switches rated NEMA 3S will also work in cold temperatures and when covered in ice.

A lightweight yet durable alternative to stainless steel enclosed switches, these aluminum enclosed switches withstand corrosion, oil, and washdowns. They can mount directly to a wall when there’s not enough room in an electrical panel. The enclosure has knockouts so you can easily connect it to conduit fittings and cord grips.

Switches with a lockout can be locked using a padlock.

Keep a switch within reach—but not in the way. These mount to the underside of desks, tables, and shelves to keep work surfaces clear and reduce the risk of accidental presses. They’re often used to remotely release electric locks. Made of aluminum, their housing is lightweight, durable, and corrosion resistant. The push-button design is ideal for uses requiring quick and simple actuation.

With a stainless steel enclosure, these switches are more durable than aluminum and plastic. They're rated NEMA 4X for protection from corrosion and washdowns.

Actuate these switches with a quick push. A housing seals in anything that could ignite flammable material, so you can use them where ignitable gas and dust may be present. You’ll know they’re safe because they meet NEC Class I Div. 2, Groups B, C, D for hazardous locations. Install them in a standard panel cutout.

Mushroom switches have a button that sticks out from the panel. Because they’re easy to identify and actuate, these switches are often used to stop equipment. They have a twist reset, so they’ll return to their starting position when you rotate the button.

Switches come with a contact block for each number of circuits they control. Additional contact blocks (sold separately) can be added to control more circuits, or to replace the included contact block.

The enclosure not only protects these switches, but also adds options for how you install them. Secure them to a wall or use the knockout to attach a cord grip and cord, so you can move them around your workstation. Made of polycarbonate plastic, the enclosure resists denting, chipping, and cracking. It’s also NEMA rated to withstand corrosion, washdowns, and spraying oil or coolant. Since you have to twist the lever to actuate these switches, they won’t accidentally flip if someone bumps into them. Choose switches based on their actuator color for an easy way to tell them apart.

Additional contact blocks (sold separately) can be added to control more circuits, or to replace the included contact block.