Tip Type Tip Type | Show |
|---|
 | Drilling |
Length Length |
|---|
|
|
|
Finish Finish |
|---|
|
Material Material |
|---|
|
For Use In For Use In |
|---|
|
Threading Threading |
|---|
 | Fully Threaded |
 | Partially Threaded |
Tapping Method Tapping Method |
|---|
 | Thread Forming |
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
|---|
Maximum Drilling Thickness Maximum Drilling Thickness |
|---|
|
Rounded Head Profile Rounded Head Profile |
|---|
|
About Tapping Screws
More
Drilling Screws for Joining Drywall to Metal Framing
Power through drywall and into metal studs up to 0.105" thick. The curved neck sinks into drywall without tearing its paper surface. Length is measured from the top of the head.
Black-phosphate steel screws resist corrosion in dry environments.
Zinc-plated steel screws resist corrosion in wet environments.
For technical drawings and 3-D models, click on a part number.
Head | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Lg. | Drill Point Size | Drill Tip Lg. | Dia. | Ht. | Drive Size | Approximate Threads per Inch | Threading | Min. Thread Lg. | Pkg. Qty. | Pkg. | |
Black-Phosphate Steel | |||||||||||
No. 6 | |||||||||||
| 3/4" | No. 2 | 9/64" | 0.334" | 0.031" | No. 2 | 20 | Fully Threaded | __ | 100 | 000000000 | 000000 |
| 1" | No. 2 | 9/64" | 0.334" | 0.031" | No. 2 | 20 | Fully Threaded | __ | 100 | 000000000 | 0000 |
| 1 1/8" | No. 2 | 9/64" | 0.334" | 0.031" | No. 2 | 20 | Fully Threaded | __ | 100 | 000000000 | 0000 |
| 1 1/4" | No. 2 | 9/64" | 0.334" | 0.031" | No. 2 | 20 | Fully Threaded | __ | 100 | 000000000 | 0000 |
| 1 3/8" | No. 2 | 9/64" | 0.334" | 0.031" | No. 2 | 20 | Fully Threaded | __ | 100 | 000000000 | 00000 |
| 1 1/2" | No. 2 | 9/64" | 0.334" | 0.031" | No. 2 | 20 | Fully Threaded | __ | 50 | 000000000 | 0000 |
| 1 5/8" | No. 2 | 9/64" | 0.334" | 0.031" | No. 2 | 20 | Fully Threaded | __ | 100 | 000000000 | 0000 |
| 1 3/4" | No. 2 | 9/64" | 0.334" | 0.031" | No. 2 | 20 | Fully Threaded | __ | 50 | 000000000 | 00000 |
| 1 7/8" | No. 2 | 9/64" | 0.334" | 0.031" | No. 2 | 20 | Fully Threaded | __ | 100 | 000000000 | 0000 |
| 2" | No. 2 | 9/64" | 0.334" | 0.031" | No. 2 | 20 | Fully Threaded | __ | 50 | 000000000 | 00000 |
| 2 1/4" | No. 2 | 9/64" | 0.334" | 0.031" | No. 2 | 20 | Partially Threaded | 2" | 25 | 000000000 | 0000 |
| 2 1/2" | No. 2 | 9/64" | 0.334" | 0.031" | No. 2 | 20 | Partially Threaded | 2" | 25 | 000000000 | 0000 |
| 3" | No. 2 | 9/64" | 0.334" | 0.031" | No. 2 | 20 | Partially Threaded | 2" | 25 | 000000000 | 0000 |
No. 8 | |||||||||||
| 1/2" | No. 2 | 3/16" | 0.363" | 0.039" | No. 2 | 18 | Fully Threaded | __ | 50 | 000000000 | 0000 |
| 3/4" | No. 2 | 3/16" | 0.363" | 0.039" | No. 2 | 18 | Fully Threaded | __ | 50 | 000000000 | 0000 |
| 1" | No. 2 | 3/16" | 0.363" | 0.039" | No. 2 | 18 | Fully Threaded | __ | 50 | 000000000 | 0000 |
| 1 1/4" | No. 2 | 3/16" | 0.363" | 0.039" | No. 2 | 18 | Fully Threaded | __ | 50 | 000000000 | 0000 |
| 1 1/2" | No. 2 | 3/16" | 0.363" | 0.039" | No. 2 | 18 | Fully Threaded | __ | 50 | 000000000 | 00000 |
| 1 5/8" | No. 2 | 3/16" | 0.363" | 0.039" | No. 2 | 18 | Fully Threaded | __ | 50 | 000000000 | 00000 |
| 1 3/4" | No. 2 | 3/16" | 0.363" | 0.039" | No. 2 | 18 | Fully Threaded | __ | 25 | 000000000 | 0000 |
| 2" | No. 2 | 3/16" | 0.363" | 0.039" | No. 2 | 18 | Fully Threaded | __ | 25 | 000000000 | 0000 |
| 2 1/4" | No. 2 | 3/16" | 0.363" | 0.039" | No. 2 | 18 | Fully Threaded | __ | 25 | 000000000 | 0000 |
| 2 3/8" | No. 2 | 3/16" | 0.363" | 0.039" | No. 2 | 18 | Partially Threaded | 2" | 100 | 000000000 | 0000 |
| 2 1/2" | No. 2 | 3/16" | 0.363" | 0.039" | No. 2 | 18 | Partially Threaded | 2" | 25 | 000000000 | 00000 |
| 2 5/8" | No. 2 | 3/16" | 0.363" | 0.039" | No. 2 | 18 | Partially Threaded | 2" | 100 | 000000000 | 00000 |
| 3" | No. 2 | 3/16" | 0.363" | 0.039" | No. 2 | 18 | Fully Threaded | __ | 50 | 000000000 | 0000 |
| 3 1/2" | No. 2 | 3/16" | 0.363" | 0.039" | No. 2 | 18 | Partially Threaded | 2" | 10 | 000000000 | 0000 |
| 4" | No. 2 | 3/16" | 0.363" | 0.039" | No. 2 | 18 | Partially Threaded | 2" | 10 | 000000000 | 0000 |
No. 10 | |||||||||||
| 1 1/4" | No. 2 | 13/64" | 0.363" | 0.039" | No. 2 | 16 | Fully Threaded | __ | 50 | 000000000 | 00000 |
| 2" | No. 2 | 13/64" | 0.363" | 0.039" | No. 2 | 16 | Fully Threaded | __ | 25 | 000000000 | 00000 |
| 2 1/2" | No. 2 | 13/64" | 0.363" | 0.039" | No. 2 | 16 | Fully Threaded | __ | 25 | 000000000 | 00000 |
| 3 1/2" | No. 2 | 13/64" | 0.363" | 0.039" | No. 2 | 16 | Partially Threaded | 2 1/2" | 10 | 000000000 | 0000 |
| 4" | No. 2 | 13/64" | 0.363" | 0.039" | No. 2 | 16 | Partially Threaded | 2 1/2" | 10 | 000000000 | 0000 |
| 4 1/2" | No. 2 | 13/64" | 0.363" | 0.039" | No. 2 | 16 | Partially Threaded | 3" | 5 | 000000000 | 0000 |
| 5 1/2" | No. 2 | 13/64" | 0.363" | 0.039" | No. 2 | 16 | Partially Threaded | 3" | 5 | 000000000 | 0000 |
| 6" | No. 2 | 13/64" | 0.363" | 0.039" | No. 2 | 16 | Partially Threaded | 3" | 5 | 000000000 | 0000 |
No. 12 | |||||||||||
| 4" | No. 2 | 15/64" | 0.415" | 0.055" | No. 3 | 14 | Partially Threaded | 2 1/2" | 5 | 000000000 | 0000 |
| 5" | No. 2 | 15/64" | 0.415" | 0.055" | No. 3 | 14 | Partially Threaded | 2 1/2" | 5 | 000000000 | 00000 |
No. 14 | |||||||||||
| 4" | No. 2 | 17/64" | 0.473" | 0.058" | No. 3 | 14 | Partially Threaded | 2 1/2" | 5 | 000000000 | 0000 |
| 5" | No. 2 | 17/64" | 0.473" | 0.058" | No. 3 | 14 | Partially Threaded | 2 1/2" | 5 | 000000000 | 00000 |
No. 7 | |||||||||||
| 1" | No. 2 | 9/64" | 0.355" | 0.031" | No. 2 | 19 | Fully Threaded | __ | 50 | 000000000 | 00000 |
| 1 1/4" | No. 2 | 9/64" | 0.355" | 0.031" | No. 2 | 19 | Fully Threaded | __ | 50 | 000000000 | 00000 |
| 1 5/8" | No. 2 | 9/64" | 0.355" | 0.031" | No. 2 | 19 | Fully Threaded | __ | 50 | 000000000 | 00000 |
| 1 7/8" | No. 2 | 9/64" | 0.355" | 0.031" | No. 2 | 19 | Fully Threaded | __ | 25 | 000000000 | 0000 |
| 2" | No. 2 | 9/64" | 0.355" | 0.031" | No. 2 | 19 | Fully Threaded | __ | 25 | 000000000 | 0000 |
Zinc-Plated Steel | |||||||||||
No. 6 | |||||||||||
| 3/4" | No. 2 | 9/64" | 0.334" | 0.031" | No. 2 | 20 | Fully Threaded | __ | 50 | 000000000 | 0000 |
| 1" | No. 2 | 9/64" | 0.334" | 0.031" | No. 2 | 20 | Fully Threaded | __ | 50 | 000000000 | 0000 |
| 1 1/8" | No. 2 | 9/64" | 0.334" | 0.031" | No. 2 | 20 | Fully Threaded | __ | 100 | 000000000 | 0000 |
| 1 1/4" | No. 2 | 9/64" | 0.334" | 0.031" | No. 2 | 20 | Fully Threaded | __ | 100 | 000000000 | 0000 |
| 1 1/2" | No. 2 | 9/64" | 0.334" | 0.031" | No. 2 | 20 | Fully Threaded | __ | 100 | 000000000 | 0000 |
| 1 5/8" | No. 2 | 9/64" | 0.334" | 0.031" | No. 2 | 20 | Fully Threaded | __ | 100 | 000000000 | 00000 |
| 1 3/4" | No. 2 | 9/64" | 0.334" | 0.031" | No. 2 | 20 | Fully Threaded | __ | 100 | 000000000 | 00000 |
| 1 7/8" | No. 2 | 9/64" | 0.334" | 0.031" | No. 2 | 20 | Fully Threaded | __ | 100 | 000000000 | 00000 |
| 2" | No. 2 | 9/64" | 0.334" | 0.031" | No. 2 | 20 | Fully Threaded | __ | 25 | 000000000 | 0000 |
No. 8 | |||||||||||
| 3/4" | No. 2 | 3/16" | 0.363" | 0.039" | No. 2 | 18 | Fully Threaded | __ | 50 | 000000000 | 00000 |
| 1" | No. 2 | 3/16" | 0.363" | 0.039" | No. 2 | 18 | Fully Threaded | __ | 50 | 000000000 | 00000 |
| 1 1/4" | No. 2 | 3/16" | 0.363" | 0.039" | No. 2 | 18 | Fully Threaded | __ | 25 | 000000000 | 0000 |
| 1 1/2" | No. 2 | 3/16" | 0.363" | 0.039" | No. 2 | 18 | Fully Threaded | __ | 25 | 000000000 | 0000 |
| 1 5/8" | No. 2 | 3/16" | 0.363" | 0.039" | No. 2 | 18 | Fully Threaded | __ | 25 | 000000000 | 0000 |
| 2" | No. 2 | 3/16" | 0.363" | 0.039" | No. 2 | 18 | Fully Threaded | __ | 25 | 000000000 | 0000 |
| 2 1/4" | No. 2 | 3/16" | 0.363" | 0.039" | No. 2 | 18 | Fully Threaded | __ | 25 | 000000000 | 0000 |
| 2 3/8" | No. 2 | 3/16" | 0.363" | 0.039" | No. 2 | 18 | Fully Threaded | __ | 25 | 000000000 | 00000 |
| 2 1/2" | No. 2 | 3/16" | 0.363" | 0.039" | No. 2 | 18 | Fully Threaded | __ | 25 | 000000000 | 00000 |
| 2 5/8" | No. 2 | 3/16" | 0.363" | 0.039" | No. 2 | 18 | Fully Threaded | __ | 25 | 000000000 | 0000 |
| 3" | No. 2 | 3/16" | 0.363" | 0.039" | No. 2 | 18 | Fully Threaded | __ | 25 | 000000000 | 0000 |
No. 10 | |||||||||||
| 1" | No. 2 | 3/16" | 0.363" | 0.039" | No. 2 | 16 | Fully Threaded | __ | 50 | 000000000 | 00000 |
| 1 1/4" | No. 2 | 3/16" | 0.363" | 0.039" | No. 2 | 16 | Fully Threaded | __ | 25 | 000000000 | 00000 |
| 2 1/2" | No. 2 | 3/16" | 0.363" | 0.039" | No. 2 | 16 | Fully Threaded | __ | 10 | 000000000 | 0000 |
| 3 1/2" | No. 2 | 13/64" | 0.363" | 0.039" | No. 2 | 16 | Partially Threaded | 3" | 10 | 000000000 | 0000 |
| 4" | No. 2 | 13/64" | 0.363" | 0.039" | No. 2 | 16 | Partially Threaded | 3" | 10 | 000000000 | 0000 |
| 5" | No. 2 | 13/64" | 0.363" | 0.039" | No. 2 | 16 | Partially Threaded | 3" | 10 | 000000000 | 0000 |
| 6" | No. 2 | 13/64" | 0.363" | 0.039" | No. 2 | 16 | Partially Threaded | 3" | 10 | 000000000 | 0000 |
Strip-Resistant Drilling Screws for
Joining Drywall to Metal Framing
Ribs under the head act as a brake to prevent over-tightening and damaging threads. A drill point powers through drywall and into metal studs up to 0.105" thick. These screws are made from steel and have a zinc-aluminum coating that resists up to 500 hours of salt spray. Length is measured from the top of the head.
For technical drawings and 3-D models, click on a part number.
Head | Drive | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Lg. | Drill Point Size | Dia. | Ht. | Size | Style | Approximate Threads per Inch | Threading | Pkg. Qty. | Pkg. | |
Zinc-Aluminum Coated Steel | ||||||||||
No. 8 | ||||||||||
| 1 1/4" | No. 2 | 0.395" | 0.094" | No. 2 | Phillips | 18 | Fully Threaded | 100 | 000000000 | 000000 |
| 1 5/8" | No. 2 | 0.395" | 0.094" | No. 2 | Phillips | 18 | Fully Threaded | 100 | 000000000 | 00000 |
| 2 1/4" | No. 2 | 0.413" | 0.118" | No. 2 | Phillips | 18 | Fully Threaded | 100 | 000000000 | 00000 |
Phillips Small-Head Drilling Screws
for Joining Drywall to Metal Framing
A drill point powers through drywall and into metal studs up to 0.105" thick. Heads are one-third smaller than those of other drywall screws. Screws are black-phosphate steel to resist corrosion in dry environments. Length is measured from the top of the head.
For technical drawings and 3-D models, click on a part number.
Square-Drive Small-Head Drilling Screws
for Joining Drywall to Metal Framing
These screws have a drill point that powers through drywall and into metal studs up to 0.105" thick. Heads are one-third smaller than those of other drywall screws. Screws are black-phosphate steel to resist corrosion in dry environments. Length is measured from the top of the head.
For technical drawings and 3-D models, click on a part number.
Drilling Screws for Metal Framing
A drill point powers through metal up to 0.105" thick. These screws are often used to fasten metal studs to metal floor and ceiling tracks in preparation for hanging drywall. They're black-phosphate steel to resist corrosion in dry environments. Length is measured from under the head.
For technical drawings and 3-D models, click on a part number.
Head | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Lg. | Drill Point Size | Drill Tip Lg. | Dia. | Ht. | Drive Size | Approximate Threads per Inch | Pkg. Qty. | Pkg. | |
Black-Phosphate Steel | |||||||||
No. 6 | |||||||||
| 7/16" | No. 2 | 9/64" | 0.319" | 0.114" | No. 2 | 20 | 250 | 000000000 | 000000 |