3/4"-5 Shafts | McMaster-Carr

Filter by

System of Measurement

Thread Size

Component

Ball Screw with One Machined End

Nut Type

Thread Direction

Length

Material

Travel Distance per Turn

Diameter

Thread Type

Threading

Number of Thread Starts

Thread Fit

Tensile Strength

Width

DFARS Specialty Metals

Exempt

Not Compliant

Export Control Classification Number (ECCN)

EAR99

RoHS

Compliant

Compliant with Exemptions

Not Compliant

REACH

Compliant

Not Compliant

Dynamic Thrust Load Capacity

1,000 lb. to 1,999 lb.

2,000 lb. to 9,999 lb.

Hardness

Root Diameter

Speed Ratio

Height

Finish

Handle Style

87 Products

Selecting Compatible Lead Screws and Nuts

Pair with a motor in automated motion and positioning applications. A tight thread fit allows these lead screws and nuts to make accurate, repeatable starts and stops. Also known as single-start and self-locking lead screws and nuts, they have a single thread that runs the length of the screw. The nut travels only when the screw turns, so your system won’t unexpectedly move when the lead screw is at rest. To ensure compatibility, please select components that have the same thread direction, thread size, and number of thread starts.

Carbon steel lead screws and flanges have good machinability. Black-oxide alloy steel lead screws are hard and strong. They have mild corrosion resistance and a dark surface color. 303 and 304 stainless steel lead screws and flanges have good corrosion resistance.

932 bearing bronze and 673 bronze nuts are wear resistant. They have good machinability and fair corrosion resistance. Cast iron nuts have good machinability and high strength. 360 brass nuts have excellent machinability and good corrosion resistance. PET plastic nuts are lightweight and corrosion resistant. PEEK plastic nuts handle twice as much heat as PET and acetal plastic nuts. They have good chemical resistance and excellent corrosion resistance.

Travel distance per turn, also known as screw lead, is the distance a nut moves with one revolution of the lead screw.

For technical drawings and 3-D models, click on a part number.

Lead Screws—Right-Hand Threaded

Right-Hand Threads

1018 Carbon Steel
Thread Size	Lg.	No. of Thread Starts	Speed Ratio	Travel Distance per Turn	Accuracy for Travel Distance per Turn	Thread Fit	Hardness	Tensile Strength, psi		Each
3/4"-5	3 ft.	1	1:1	0.2"	±0.009" per ft.	Class 2C	Brinell 126	64,000	000000000	000000
3/4"-5	6 ft.	1	1:1	0.2"	±0.009" per ft.	Class 2C	Brinell 126	64,000	000000000	000000
Black-Oxide 4140 Alloy Steel
3/4"-5	3 ft.	1	1:1	0.2"	±0.009" per ft.	Class 2C	Brinell 271	125,000	000000000	00000
3/4"-5	6 ft.	1	1:1	0.2"	±0.009" per ft.	Class 2C	Brinell 271	125,000	000000000	000000
304 Stainless Steel
3/4"-5	3 ft.	1	1:1	0.2"	±0.009" per ft.	Class 2C	Brinell 150	72,000	000000000	00000
3/4"-5	6 ft.	1	1:1	0.2"	±0.009" per ft.	Class 2C	Brinell 150	72,000	000000000	000000

Lead Screws—Left-Hand Threaded

Left-Hand Threads

1018 Carbon Steel
Thread Size	Lg.	Lg., ft.	No. of Thread Starts	Speed Ratio	Travel Distance per Turn	Accuracy for Travel Distance per Turn	Thread Fit	Hardness	Tensile Strength, psi		Each
3/4"-5	3 ft.	3	1	1:1	0.2"	±0.009" per ft.	Class 2C	Brinell 126	64,000	000000000	000000
3/4"-5	6 ft.	6	1	1:1	0.2"	±0.009" per ft.	Class 2C	Brinell 126	64,000	000000000	000000
Black-Oxide 4140 Alloy Steel
3/4"-5	3 ft.	3	1	1:1	0.2"	±0.009" per ft.	Class 2C	Brinell 271	125,000	000000000	00000
3/4"-5	6 ft.	6	1	1:1	0.2"	±0.009" per ft.	Class 2C	Brinell 271	125,000	000000000	000000
304 Stainless Steel
3/4"-5	3 ft.	3	1	1:1	0.2"	±0.009" per ft.	Class 2C	Brinell 150	72,000	000000000	00000
3/4"-5	6 ft.	6	1	1:1	0.2"	±0.009" per ft.	Class 2C	Brinell 150	72,000	000000000	000000

Platform Nuts—Right-Hand Threaded

Platform nuts have wide, machinable surfaces for custom mounting.

932 Bearing Bronze
Thread Size	Lg.	Wd.	Ht.	Center Ht.	No. of Thread Starts	Speed Ratio	Travel Distance per Turn	Thread Fit	Hardness	Dynamic Thrust Load Cap., lbs.		Each
3/4"-5	2 1/4"	2 5/8"	1 5/8"	15/16"	1	1:1	0.2"	Class 2C	Brinell 65	2,800	000000	0000000

Platform Nuts—Left-Hand Threaded

Platform nuts have wide, machinable surfaces for custom mounting.

932 Bearing Bronze
Thread Size	Lg.	Wd.	Ht.	Center Ht.	No. of Thread Starts	Speed Ratio	Travel Distance per Turn	Thread Fit	Hardness	Dynamic Thrust Load Cap., lbs.		Each
3/4"-5	2 1/4"	2 5/8"	1 5/8"	15/16"	1	1:1	0.2"	Class 2C	Brinell 65	2,800	0000000	0000000

Round Nuts—Right-Hand Threaded

Cast Iron
Thread Size	Lg.	Dia.	No. of Thread Starts	Speed Ratio	Travel Distance per Turn	Thread Fit	Hardness	Dynamic Thrust Load Cap., lbs.	Temperature Range, °F		Each
3/4"-5	1 1/2"	2.234"	1	1:1	0.2"	Class 2C	Brinell 217	Not Rated	__	000000000	000000
932 Bearing Bronze
3/4"-5	1 1/2"	2.234"	1	1:1	0.2"	Class 2C	Brinell 65	2,900	__	00000000	000000
PET Plastic
3/4"-5	1 1/2"	2.234"	1	1:1	0.2"	Class 2C	Not Rated	1,450	15° to 175°	00000000	000000

Round Nuts—Left-Hand Threaded

Cast Iron
Thread Size	Lg.	Dia.	No. of Thread Starts	Speed Ratio	Travel Distance per Turn	Thread Fit	Hardness	Dynamic Thrust Load Cap., lbs.	Temperature Range, °F		Each
3/4"-5	1 1/2"	2.234"	1	1:1	0.2"	Class 2C	Brinell 217	Not Rated	__	000000000	000000
932 Bearing Bronze
3/4"-5	1 1/2"	2.234"	1	1:1	0.2"	Class 2C	Brinell 65	2,900	__	00000000	000000
PET Plastic
3/4"-5	1 1/2"	2.234"	1	1:1	0.2"	Class 2C	Not Rated	1,450	15° to 175°	00000000	000000

Externally Threaded Nuts—Right-Hand Threaded

Combine externally threaded nuts with a flange to create a custom flange nut.

						External Thread
Thread Size	Lg.	Dia.	No. of Thread Starts	Speed Ratio	Travel Distance per Turn	Size	Lg.	Thread Fit	Hardness	Dynamic Thrust Load Cap., lbs.	Temperature Range, °F		Each
360 Brass
3/4"-5	1 1/4"	1.125"	1	1:1	0.2"	1"-18	1/2"	Class 2C	Brinell 141	2,800	__	000000000	000000
673 Bronze
3/4"-5	1 1/4"	1.125"	1	1:1	0.2"	1"-18	1/2"	Class 2C	Brinell 70	Not Rated	__	000000000	00000
PET Plastic
3/4"-5	1 1/4"	1.125"	1	1:1	0.2"	1"-18	1/2"	Class 2C	Not Rated	1,450	15° to 175°	000000000	00000
PEEK Plastic
3/4"-5	1 1/4"	1.125"	1	1:1	0.2"	1"-18	1/2"	Class 2C	Not Rated	1,400	-40° to 525°	000000000	000000

Externally Threaded Nuts—Left-Hand Threaded

Combine externally threaded nuts with a flange to create a custom flange nut.

						External Thread
Thread Size	Lg.	Dia.	No. of Thread Starts	Speed Ratio	Travel Distance per Turn	Size	Lg.	Thread Fit	Hardness	Dynamic Thrust Load Cap., lbs.		Each
673 Bronze
3/4"-5	1 1/4"	1.125"	1	1:1	0.2"	1"-18	1/2"	Class 2C	Brinell 70	Not Rated	000000000	000000

Flanges

Thread onto an externally threaded acme nut to create a custom flange nut.

Carbon steel flanges have good machinability. However, they will rust when exposed to moisture. Black-oxide carbon steel flanges have mild corrosion resistance in dry environments and a dark surface color. 303 stainless steel flanges have good corrosion resistance.

1215 Carbon Steel
Flange Thread Size	Flange Dia.	Flange Thick.	Bolt Circle Dia.	Flange Hardness		Each
1"-18	2 5/8"	17/32"	2 3/32"	Not Rated	000000000	000000
303 Stainless Steel
1"-18	2 5/8"	17/32"	2 3/32"	Brinell 140	0000000	00000

Flange Nuts—Right-Hand Threaded

Flange nuts have wide, machinable surfaces for custom mounting.

			Flange
Thread Size	Lg.	Dia.	Dia.	Thick.	No. of Thread Starts	Speed Ratio	Travel Distance per Turn	Thread Fit	Hardness	Tensile Strength, psi	Dynamic Thrust Load Cap., lbs.		Each
932 Bearing Bronze
3/4"-5	2 1/4"	1.375"	2 5/8"	9/16"	1	1:1	0.2"	Class 2C	Brinell 65	35,000	2,800	000000000	0000000

Ball Screws and Nuts

Internal ball bearings provide smooth low-friction travel in applications that require high speeds, accurate positioning, and repeatable movement. Also known as single-start ball screws and nuts, they have a single thread that runs the length of the screw. They operate with more torque than fast-travel ball screws and nuts. To ensure compatibility, select components that have the same thread direction and size. Ball nuts are furnished with a tube to keep ball bearings in place. Do not remove the tube until you are ready to install the nuts onto the screws.

Black-oxide alloy steel ball screws and nuts have mild corrosion resistance.

Travel distance per turn, also known as screw lead, is the distance a ball nut moves with one revolution of the ball screw.

For technical drawings and 3-D models, click on a part number.

Ball Screws—Right-Hand Threaded

Root diameter indicates the diameter the ball screw will be after machining away the threads.

Alloy Steel
Thread Size	Lg.	No. of Thread Starts	Travel Distance per Turn	Accuracy for Travel Distance per Turn	Root Dia.	Hardness	Tensile Strength, psi	Temp. Range, °F		Each
3/4"-5	1 ft.	1	0.2"	±0.004" per ft.	0.655"	Rockwell C56	85,000	-40° to 300°	00000000	000000
3/4"-5	2 ft.	1	0.2"	±0.004" per ft.	0.655"	Rockwell C56	85,000	-40° to 300°	00000000	000000
3/4"-5	3 ft.	1	0.2"	±0.004" per ft.	0.655"	Rockwell C56	85,000	-40° to 300°	00000000	000000
3/4"-5	4 ft.	1	0.2"	±0.004" per ft.	0.655"	Rockwell C56	85,000	-40° to 300°	00000000	000000
3/4"-5	5 ft.	1	0.2"	±0.004" per ft.	0.655"	Rockwell C56	85,000	-40° to 300°	00000000	000000
3/4"-5	6 ft.	1	0.2"	±0.004" per ft.	0.655"	Rockwell C56	85,000	-40° to 300°	00000000	000000

Ball Screws with One Machined End—Right-Hand Threaded

Ball screws with one machined end fit into an end support and are ready to connect to a motor. To adjust the length, the non-machined end can be cut to size.

Root diameter indicates the diameter the ball screw will be after machining away the threads.

							Machined End			Keyway
Thread Size	Root Dia.	Lg., ft.	No. of Thread Starts	Travel Distance per Turn	Accuracy for Travel Distance per Turn	Shoulder Lg.	Overall Lg.	Thread Size	Dia.	Lg.	Wd.	Hardness	Tensile Strength, psi	Temp., °F		Each
Alloy Steel
3/4"-5	0.655"	2	1	0.2"	±0.004" per ft.	2 3/16"	3 3/16"	0.586"-32	1/2"	7/8"	1/8"	Rockwell C56	85,000	-40° to 300°	00000000	0000000
3/4"-5	0.655"	4	1	0.2"	±0.004" per ft.	2 3/16"	3 3/16"	0.586"-32	1/2"	7/8"	1/8"	Rockwell C56	85,000	-40° to 300°	00000000	000000
3/4"-5	0.66"	6	1	0.2"	±0.004" per ft.	2 3/16"	3 3/16"	0.586"-32	1/2"	7/8"	1/8"	Rockwell C56	85,000	-40° to 300°	0000000	000000

Externally-Threaded Ball Nuts—Right-Hand Threaded

Secure a way wiper on the end of a ball nut to sweep chips and other contaminants out of the way as it moves across the ball screw.

Ball Nuts													Way Wipers
	Thread Size	Lg.	Dia.	No. of Thread Starts	Travel Distance per Turn	External Thread Size	Hardness	Dynamic Thrust Load Cap., lbs.	Max. Backlash	Temp. Range, °F		Each		Each
Black-Oxide Alloy Steel
A	3/4"-5	2 57/64"	1 5/16"	1	0.2"	1.173"-18	Rockwell C56	1,900	0.015"	-40° to 300°	00000000	0000000	0000000	000000

Flange Ball Nuts—Right-Hand Threaded

				Flange
	Thread Size	Lg.	Dia.	Dia.	Thick.	No. of Thread Starts	Travel Distance per Turn	Bolt Circle Dia.	Hardness	Dynamic Thrust Load Cap., lbs.	Max. Backlash		Each
Black-Oxide Alloy Steel
D	3/4"-5	2 57/64"	1 5/16"	2 39/64"	17/32"	1	0.2"	2 3/32"	Rockwell C56	1,900	0.015"	00000000	0000000

Acme Lead Screws and Nuts

Found in hand-powered clamps, vises, grates, doors, and work tables, lead screws and nuts have broad, square threads that are well suited for quick assembly, high clamping forces, and lifting and lowering heavy objects. To ensure compatibility, please select components that have the same thread direction, thread size, and number of thread starts.

Carbon steel components are easier to machine than alloy steel components. Zinc-plated carbon steel components have mild corrosion resistance. Alloy steel components are harder and stronger than carbon steel components. Cast iron components have good machinability and high strength. 360 brass components have excellent machinability and good corrosion resistance. 932 bearing bronze components are more wear resistant than brass components. They have good machinability and fair corrosion resistance. 18-8 stainless steel components have good corrosion resistance. 316 stainless steel components have excellent corrosion resistance.

Travel distance per turn, also known as screw lead, is the distance a nut or handle moves with one revolution of the lead screw.

For technical drawings and 3-D models, click on a part number.

Lead Screws—Right-Hand Threaded

Carbon Steel
Thread Size	Lg.	No. of Thread Starts	Speed Ratio	Travel Distance per Turn	Thread Fit	Fastener Strength Grade/Class	Hardness	Tensile Strength, psi	Specifications Met		Each
3/4"-5	12"	1	1:1	0.2"	Class 2G	Grade 2	Rockwell B61	64,000	ASTM A108	000000000	000000
3/4"-5	3 ft.	1	1:1	0.2"	Class 2G	Grade 2	Rockwell B61	64,000	ASTM A108	000000000	00000
3/4"-5	6 ft.	1	1:1	0.2"	Class 2G	Grade 2	Rockwell B61	53,000	ASTM A108	000000000	00000
3/4"-5	12 ft.	1	1:1	0.2"	Class 2G	Grade 2	Rockwell B61	64,000	ASTM A108	000000000	000000
Zinc-Plated Carbon Steel
3/4"-5	6"	1	1:1	0.2"	Class 2G	Grade 2	Rockwell B61	53,000	ASTM A108	000000000	00000
3/4"-5	12"	1	1:1	0.2"	Class 2G	Grade 2	Rockwell B61	68,000	ASTM A108	000000000	00000
3/4"-5	18"	1	1:1	0.2"	Class 2G	Grade 2	Rockwell B61	53,000	ASTM A108	000000000	00000
3/4"-5	3 ft.	1	1:1	0.2"	Class 2G	Grade 2	Rockwell B61	68,000	ASTM A108	000000000	00000
3/4"-5	6 ft.	1	1:1	0.2"	Class 2G	Grade 2	Rockwell B61	68,000	ASTM A108	000000000	00000
Alloy Steel
3/4"-5	12"	1	1:1	0.2"	Class 2G	ASTM Grade B7	Rockwell C35	125,000	ASTM A193	000000000	00000
3/4"-5	3 ft.	1	1:1	0.2"	Class 2G	ASTM Grade B7	Rockwell C35	125,000	ASTM A193	000000000	00000
3/4"-5	6 ft.	1	1:1	0.2"	Class 2G	ASTM Grade B7	Rockwell C35	125,000	ASTM A193	000000000	000000
3/4"-5	12 ft.	1	1:1	0.2"	Class 2G	ASTM Grade B7	Rockwell C35	125,000	ASTM A193	000000000	000000
18-8 Stainless Steel
3/4"-5	6"	1	1:1	0.2"	Class 2G	__	Rockwell B96	Not Rated	__	000000000	00000
3/4"-5	12"	1	1:1	0.2"	Class 2G	__	Rockwell B96	Not Rated	__	000000000	00000
3/4"-5	3 ft.	1	1:1	0.2"	Class 2G	__	Rockwell B96	Not Rated	__	000000000	000000
3/4"-5	6 ft.	1	1:1	0.2"	Class 2G	__	Rockwell B96	Not Rated	__	000000000	000000
3/4"-5	12 ft.	1	1:1	0.2"	Class 2G	__	Rockwell B96	Not Rated	__	000000000	000000
316 Stainless Steel
3/4"-5	12"	1	1:1	0.2"	Class 2G	ASTM Grade B8M	Rockwell B97	75,000	ASTM A193	000000000	00000
3/4"-5	3 ft.	1	1:1	0.2"	Class 2G	ASTM Grade B8M	Rockwell B97	75,000	ASTM A193	000000000	000000
3/4"-5	6 ft.	1	1:1	0.2"	Class 2G	ASTM Grade B8M	Rockwell B97	75,000	ASTM A193	000000000	000000

Lead Screws—Left-Hand Threaded

Carbon Steel
Thread Size	Lg.	No. of Thread Starts	Speed Ratio	Travel Distance per Turn	Thread Fit	Fastener Strength Grade/Class	Hardness	Tensile Strength, psi	Specifications Met		Each
3/4"-5	3 ft.	1	1:1	0.2"	Class 2G	Grade 2	Rockwell B61	53,000	ASTM A108	000000000	000000
3/4"-5	6 ft.	1	1:1	0.2"	Class 2G	Grade 2	Rockwell B61	53,000	ASTM A108	000000000	00000
Alloy Steel
3/4"-5	3 ft.	1	1:1	0.2"	Class 2G	ASTM Grade B7	Rockwell C35	125,000	ASTM A193	000000000	00000
3/4"-5	6 ft.	1	1:1	0.2"	Class 2G	ASTM Grade B7	Rockwell C35	125,000	ASTM A193	000000000	000000

Coupling Nuts—Right-Hand Threaded

Coupling nuts connect two lead screws.

Carbon Steel
Thread Size	Ht.	Wd.	No. of Thread Starts	Speed Ratio	Travel Distance per Turn	Thread Fit	Hardness		Each
3/4"-5	2 1/4"	1"	1	1:1	0.2"	Class 2G	Rockwell B75	000000000	000000
18-8 Stainless Steel
3/4"-5	2 1/4"	1"	1	1:1	0.2"	Class 2G	Not Rated	000000000	00000

Coupling Nuts—Left-Hand Threaded

Coupling nuts connect two lead screws.

Carbon Steel
Thread Size	Ht.	Wd.	No. of Thread Starts	Speed Ratio	Travel Distance per Turn	Thread Fit	Hardness		Each
3/4"-5	2 1/4"	1"	1	1:1	0.2"	Class 2G	Rockwell B75	000000000	000000

Flange Nuts—Right-Hand Threaded

Flange nuts move objects along the length of a lead screw. Flange nuts have a wide machinable flange for custom mounting.

			Flange
Thread Size	Ht.	Dia.	Dia.	Thick.	No. of Thread Starts	Speed Ratio	Travel Distance per Turn	Thread Fit	Hardness		Each
932 Bearing Bronze
3/4"-5	1 1/2"	1"	2"	3/8"	1	1:1	0.2"	Class 2G	Not Rated	000000000	0000000

Flange Nuts—Left-Hand Threaded

Flange nuts move objects along the length of a lead screw. Flange nuts have a wide machinable flange for custom mounting.

			Flange
Thread Size	Ht.	Dia.	Dia.	Thick.	No. of Thread Starts	Speed Ratio	Travel Distance per Turn	Thread Fit	Hardness		Each
932 Bearing Bronze
3/4"-5	1 1/2"	1"	2"	3/8"	1	1:1	0.2"	Class 2G	Not Rated	000000000	0000000

Round Nuts—Right-Hand Threaded

Round nuts move objects along the length of a lead screw.

Cast Iron
Thread Size	Ht.	Dia.	No. of Thread Starts	Speed Ratio	Travel Distance per Turn	Thread Fit	Hardness	Specifications Met		Each
3/4"-5	1 1/2"	2 15/64"	1	1:1	0.2"	Class 2G	Rockwell B96	__	000000000	000000
360 Brass
3/4"-5	3/4"	1 1/4"	1	1:1	0.2"	Class 2G	Rockwell B55	ASTM B16	000000000	00000
932 Bearing Bronze
3/4"-5	1 9/32"	1 13/32"	1	1:1	0.2"	Class 2G	Not Rated	ASTM B505	000000000	00000

Round Nuts—Left-Hand Threaded

Round nuts move objects along the length of a lead screw.

Cast Iron
Thread Size	Ht.	Dia.	No. of Thread Starts	Speed Ratio	Travel Distance per Turn	Thread Fit	Hardness	Specifications Met		Each
3/4"-5	1 1/2"	2 15/64"	1	1:1	0.2"	Class 2G	Rockwell B96	__	000000000	000000
360 Brass
3/4"-5	3/4"	1 1/4"	1	1:1	0.2"	Class 2G	Rockwell B55	ASTM B16	000000000	00000
932 Bearing Bronze
3/4"-5	1 9/32"	1 13/32"	1	1:1	0.2"	Class 2G	Not Rated	ASTM B505	000000000	00000

Hex Nuts—Right-Hand Threaded

Hex nuts fasten and position lead screw components.

Carbon Steel
Thread Size	Ht.	Wd.	No. of Thread Starts	Speed Ratio	Travel Distance per Turn	Thread Fit	Hardness	Specifications Met		Each
3/4"-5	47/64"	1 1/4"	1	1:1	0.2"	Class 2G	Rockwell B75	__	000000000	00000
Zinc-Plated Carbon Steel
3/4"-5	47/64"	1 1/4"	1	1:1	0.2"	Class 2G	Rockwell B75	__	000000000	00000
360 Brass
3/4"-5	3/4"	1 1/4"	1	1:1	0.2"	Class 2G	Rockwell B75	ASTM B16	000000000	00000
18-8 Stainless Steel
3/4"-5	47/64"	1 1/4"	1	1:1	0.2"	Class 2G	Not Rated	__	000000000	00000

Hex Nuts—Left-Hand Threaded

Hex nuts fasten and position lead screw components.

Carbon Steel
Thread Size	Ht.	Wd.	No. of Thread Starts	Speed Ratio	Travel Distance per Turn	Thread Fit	Fastener Strength Grade/Class	Hardness	Specifications Met		Each
3/4"-5	47/64"	1 1/4"	1	1:1	0.2"	Class 2G	Grade 2	Rockwell B85	__	000000000	00000
360 Brass
3/4"-5	3/4"	1 1/4"	1	1:1	0.2"	Class 2G	__	Rockwell B75	ASTM B16	000000000	00000
18-8 Stainless Steel
3/4"-5	47/64"	1 1/4"	1	1:1	0.2"	Class 2G	__	Not Rated	__	000000000	00000

Square Nuts—Right-Hand Threaded

Square nuts fasten and position lead screw components. Square nuts have large sides, which make them easier to grip with a wrench than hex nuts and keep them from rotating in channels and square holes.

360 Brass
Thread Size	Ht.	Wd.	No. of Thread Starts	Speed Ratio	Travel Distance per Turn	Thread Fit	Hardness	Specifications Met		Each
3/4"-5	3/4"	1 1/4"	1	1:1	0.2"	Class 2G	Rockwell B55	ASTM B16	000000000	000000

Square Nuts—Left-Hand Threaded

360 Brass
Thread Size	Ht.	Wd.	No. of Thread Starts	Speed Ratio	Travel Distance per Turn	Thread Fit	Hardness	Specifications Met		Each
3/4"-5	3/4"	1 1/4"	1	1:1	0.2"	Class 2G	Rockwell B55	ASTM B16	000000000	000000

Flat Handles—Right-Hand Threaded

Handles fasten and position lead screw components. Handles are easy to grip and tighten by hand for quick assembly and disassembly.

Cast Iron
Thread Size	Ht.	Wd.	No. of Thread Starts	Speed Ratio	Travel Distance per Turn	Thread Fit	Hardness		Each
3/4"-5	1 1/8"	9 1/2"	1	1:1	0.2"	Class 2G	Rockwell B72	000000000	000000

Ball Handles—Right-Hand Threaded

Handles fasten and position lead screw components. Handles are easy to grip and tighten by hand for quick assembly and disassembly.

Cast Iron
Thread Size	Ht.	Wd.	No. of Thread Starts	Speed Ratio	Travel Distance per Turn	Thread Fit	Hardness		Each
3/4"-5	1 1/8"	9 1/2"	1	1:1	0.2"	Class 2G	Rockwell B72	000000000	000000

Email Us

Selecting Compatible Lead Screws and Nuts

Precision Acme Lead Screws and Nuts

Ball Screws and Nuts

Acme Lead Screws and Nuts