When one end becomes worn, reverse the bit to use the other end. These bits have short flutes and a sturdy construction which prevent snagging that deforms sheet metal and thin-wall tubing. They can be used in both hand-held drilling and machine-tool applications. The split point keeps the bit centered without a pilot hole.

For technical drawings and 3-D models, click on a part number.

These bits have short flutes and a sturdy construction which prevent snagging that deforms sheet metal and thin-wall tubing. They can be used in both hand-held drilling and machine-tool applications. The split point keeps the bit centered without a pilot hole.

For technical drawings and 3-D models, click on a part number.

Harder, stronger, and more wear resistant than high-speed steel, solid-carbide bits maintain their sharp edges longer. They require rigid toolholding to prevent breakage and should not be used in hand-held drilling applications. These bits have short flutes and a sturdy construction which prevent snagging that deforms sheet metal and thin-wall tubing.

Steps with progressively larger diameters let you drill a range of sizes with one bit. Also known as step drills.

Black-oxide drill bits produce less friction than uncoated drill bits.

Titanium-nitride (TiN) coated drill bits last longer and can drill at higher speeds than uncoated drill bits and black-oxide drill bits.

Place a washer (not included) with an ID of the desired hole size over the bit and it acts as a stop to prevent the bit from drilling a larger hole.

Style A do not require a pilot hole.

Style B require a 1 29/64” pilot hole to start drilling.

For technical drawings and 3-D models, click on a part number.

Three drill points allow these bits to separate spot-welded panels without damaging the bottom panel.

Drill bits with flat on shank are used in spot-weld drills, such as Spitznagel.

For technical drawings and 3-D models, click on a part number.