About Powered Nibblers and Powered Cutters
More
Electric Sheet Metal Nibblers
Punch small pieces out of material to create an almost burr-free cut with no material distortion. To start cuts in the center of material, drill a starting hole.
Style D can also cut aluminum with the punch, die, and stripper for use on aluminum (sold separately).
Nibblers that comply with OSHA 29 CFR 1910.243 meet standards for hand-held equipment. Nibblers that meet OSHA Compliant 29 CFR 1926.302 fulfill requirements for power-operated hand tools.
Nibblers that comply with OSHA 29 CFR 1910.243 meet standards for hand-held equipment. Nibblers that meet OSHA Compliant 29 CFR 1926.302 fulfill requirements for power-operated hand tools.
Nibblers and punches that cannot be sold to the listed areas are restricted due to product regulations.
Straight, Right
Curves, Left Curves
For Max. Thick. | Material | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Steel | Stainless Steel | Aluminum | Cut Wd. | Min. Cut Radius | Overall Lg. | Punch | Housing | No-Load Strokes per Minute | Flat Stock Cutting Speed, in./min. | Starting Hole Dia. | For Texture | Switch Type | Voltage | Current, A | Cannot Be Sold To | Each | |
Cutting Pattern—Right Curves, Straight, Left Curves | |||||||||||||||||
(A) For Use On Aluminum, Brass, Copper, Iron, Stainless Steel, Steel, Tin | |||||||||||||||||
| 1/16" | 3/64" | 7/64" | 1/4" | 1 3/4" | 10 1/4" | Steel | Polycarbonate | 2,200 | 74 | 1/2" | Corrugated, Flat | Push Button | 120V DC | 5 | Outside United States | 0000000 | 0000000 |
(B) For Use On Aluminum, Brass, Copper, Iron, Stainless Steel, Steel, Tin, Nickel | |||||||||||||||||
| 1/8" | 3/32" | 5/64" | 0.24" | 2 1/2" | 12 1/4" | Steel | Magnesium | 1,000 | 105 | 1 21/32" | Corrugated, Flat | Toggle | 120V DC 120V AC | 4 | __ | 0000000 | 00000000 |
(C) For Use On Aluminum, Brass, Copper, Iron, Stainless Steel, Steel, Tin, Nickel | |||||||||||||||||
| 11/64" | 1/8" | 3/16" | 0.21" | 6" | 13" | Steel | Aluminum | 260 | 48 | 2 1/2" | Flat | Trigger with Lock | 110V AC | 3-5 | __ | 0000000 | 00000000 |
(D) For Use On Brass, Copper, Iron, Stainless Steel, Steel, Tin, Nickel | |||||||||||||||||
| 1/4" | 11/64" | 3/8" | 1/4" | 8" | 14 1/4" | Steel | Aluminum | 240 | 48 | 3 1/2" | Flat | Trigger with Lock | 120V AC | 15 | __ | 0000000 | 00000000 |
Cutting Pattern—Straight | |||||||||||||||||
(D) For Use On Brass, Copper, Iron, Stainless Steel, Steel, Tin, Nickel | |||||||||||||||||
| 1/4" | 11/64" | 3/8" | 1/4" | 32" | 14 1/4" | Steel | Aluminum | 240 | 48 | 3 1/2" | Flat | Trigger with Lock | 120V AC | 15 | __ | 000000 | 00000000 |
| Cannot Be Sold To | Each | ||
| Optional Punch for Style D (Recommended for cutting stainless steel) | __ | 0000000 | 000000 |
| Optional Punch for Style D (Required for cutting Aluminum) | __ | 0000000 | 00000 |
| Replacement Punch For Style B | __ | 0000000 | 00000 |
| Replacement Punch for Style A | Outside United States | 00000000 | 00000 |
| Replacement Punch for Style C | __ | 0000000 | 00000 |
| Replacement Punch for Style D | __ | 0000000 | 00000 |
| Each | ||
| Replacement Die Holder for Style B | 0000000 | 0000000 |
| Each | ||
| Replacement Toggle Switch for Style B | 0000000 | 000000 |
| Each | ||
| Replacement Assembly Screws for Style D | 00000000 | 00000 |
| Each | ||
| Replacement Bearing for Style D | 00000000 | 000000 |
| Each | ||
| Replacement Grease Fitting for Style D | 00000000 | 00000 |
Smooth-Edge Electric Sheet Metal Cutters
Straight, Right
Curves, Left Curves
A double blade creates two cuts and a 7/32" wide waste strip that peels back, leaving two smooth edges with little distortion. These cutters are also known as slotting shears. To start cuts in the center of material, drill a starting hole.
For Max. Thick. | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Steel | Stainless Steel | Aluminum | Cut Wd. | Min. Cut Radius | Overall Lg. | Blade Material | No-Load Strokes per Minute | Starting Hole Dia. | Voltage | Current, A | Cord Lg., ft. | Plug Type | Specifications Met | Includes | Each | ||
Cutting Pattern—Straight, Right Curves, Left Curves | |||||||||||||||||
For Use On Aluminum, Brass, Copper, Iron, Nickel, Stainless Steel, Steel, Tin | |||||||||||||||||
| A | 1/16" | 3/64" | 3/32" | 7/32" | 7" | 14" | Steel | 2,500 | 1/2" | 120V AC | 5 | 8 | Two Prong | OSHA Compliant 29 CFR 1910.243, OSHA Compliant 29 CFR 1926.302, CSA Certified, UL Listed | Lubricant, Head-Adjusting Wrench | 0000000 | 0000000 |
For Use On Aluminum, Steel | |||||||||||||||||
| B | 3/64" | 1/32" | 3/64" | 7/32" | 4 1/2" | 15 1/2" | Steel | 2,450 | 7/32" | 20V DC | __ | __ | __ | CSA Certified | Two Batteries, Battery Charger, Bag, Hex Wrench | 0000000 | 000000 |
Electric Sheet Metal Cutters
Use to cut patterns in flat material with minimal material loss and less effort compared to manual cutters.
Cutters and blades cannot be sold to the listed areas due to product regulations.
Straight, Right
Curves, Left Curves
For Max. Thick. | Material | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Steel | Stainless Steel | Aluminum | Min. Cut Radius | Overall Lg. | Blade | Housing | No-Load Strokes per Minute | Voltage | Current, A | Cord Lg., ft. | Plug Type | Specifications Met | Cannot Be Sold To | Each | |
Cutting Pattern—Straight, Right Curves, Left Curves | |||||||||||||||
(A) For Use On Aluminum, Brass, Copper, Iron, Nickel, Stainless Steel, Steel, Tin | |||||||||||||||
| 3/64" | 3/64" | 3/64" | 1 1/8" | 12 1/2" | Steel | Plastic | 4,000 | 120V AC | 3.3 | 8 | Two Prong | UL Listed | Outside United States | 00000000 | 0000000 |
(B) For Use On Aluminum, Brass, Copper, Stainless Steel, Steel, Tin | |||||||||||||||
| 9/64" | 1/16" | 5/32" | 2" | 8 3/8" | Steel | Plastic | 1,600 | 120V AC | 6.2 | 8 | Two Prong | CSA Certified, CSA-US Certified | Outside United States | 0000000 | 000000 |
Electric Sheet Metal Cutters for Thin Metal
Straight, Right
Curves, Left Curves
Minimize material loss and edge distortion with these scissor-like cutters that cut metal up to 1/64" thick. Also known as scissor-blade shears, the bottom blade remains stationary while the upper blade moves up and down to cut.
For Max. Thick. | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Steel | Aluminum | Min. Cut Radius | Overall Lg. | Blade Material | No-Load Strokes per Minute | Switch Type | Voltage | Current, A | Cord Lg., ft. | Plug Type | Specifications Met | Each | |
Cutting Pattern—Straight, Right Curves, Left Curves | |||||||||||||
For Use On Aluminum, Brass, Copper, Iron, Nickel, Steel, Tin | |||||||||||||
| 1/64" | 1/64" | 7" | 16" | Steel | 2,500 | Variable Speed Trigger | 120V AC | 5 | 8 | Two Prong | OSHA Compliant 29 CFR 1910.243, OSHA Compliant 29 CFR 1926.302, CSA Certified, UL Listed | 0000000 | 0000000 |
Air-Powered Sheet Metal Nibblers
Straight, Right
Curves, Left Curves
These nibblers punch small pieces out of material to create an almost burr-free cut with no material distortion. To start cuts in the center of material, drill a starting hole.
For Max. Thick. | Material | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Steel | Stainless Steel | Aluminum | Cut Wd. | Min. Cut Radius | Overall Lg. | Punch | Housing | No-Load Strokes per Minute | Flat Stock Cutting Speed, in./min. | Starting Hole Dia. | For Texture | Switch Type | Air Consumption, cfm | Each | |
Cutting Pattern—Right Curves, Straight, Left Curves | |||||||||||||||
(A) For Use On Aluminum, Brass, Copper, Iron, Nickel, Steel, Tin, Plastic | |||||||||||||||
| 3/64" | __ | 1/32" | 1/4" | 1/4" | 7 1/16" | Steel | Aluminum | 3,200 | 62 | 1/2" | Corrugated | Lever | 21 | 00000000 | 0000000 |
(B) For Use On Aluminum, Brass, Copper, Steel, Tin | |||||||||||||||
| 3/64" | __ | 3/64" | 3/16" | 3/16" | 7" | Steel | Plastic | 2,600 | 46.5 | 5/8" | Corrugated | Lever | 4 | 0000000 | 000000 |
(C) For Use On Aluminum, Brass, Copper, Iron, Nickel, Stainless Steel, Steel, Tin | |||||||||||||||
| 3/32" | 5/64" | 1/8" | 1/4" | 2" | 12" | Steel | Aluminum | 192 | 55 | 1 1/2" | Corrugated, Flat | Lever | 27 | 000000 | 000000 |
Cutting Pattern—Straight | |||||||||||||||
(D) For Use On Aluminum, Brass, Copper, Iron, Nickel, Stainless Steel, Steel, Tin | |||||||||||||||
| 11/64" | 1/8" | 11/64" | 3/16" | 6" | 12" | Steel | Aluminum | 192 | 48 | 2 1/2" | Flat | Trigger with Lock | 21-23 | 00000000 | 00000000 |
Air-Powered Sheet Metal Cutters
Straight, Right
Curves, Left Curves
Also known as slotting shears, these cutters have a double blade that creates two cuts and a 7/32" wide waste strip that peels back, leaving two smooth edges with little distortion. To start cuts in the center of material, drill a starting hole.
For Max. Thick. | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Steel | Stainless Steel | Aluminum | Cut Wd. | Min. Cut Radius | Overall Lg. | Blade Material | No-Load Strokes per Minute | Starting Hole Dia. | Air Consumption, cfm | Air Pressure, psi | Includes | Each | ||
Cutting Pattern—Straight, Right Curves, Left Curves | ||||||||||||||
For Use On Aluminum, Brass, Copper, Iron, Nickel, Stainless Steel, Steel, Tin | ||||||||||||||
| A | 3/64" | 1/32" | 3/64" | 7/32" | 6" | 10" | Steel | 2,500 | 1/2" | 4 | 90 | Wrench, Lubricant | 0000000 | 0000000 |
| B | 1/16" | 3/64" | 3/32" | 7/32" | 7" | 10 1/2" | Steel | 2,200 | 1/2" | 4 | 90 | Wrench, Lubricant | 0000000 | 000000 |
Air-Powered Sheet Metal Cutters for Thin Metal
Straight, Right
Curves, Left Curves
Also known as scissor-blade shears, the bottom blade remains stationary while the upper blade moves up and down to cut metal up to 1/64" thick with minimal material loss and edge distortion.
For Max. Thick. | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Steel | Aluminum | Min. Cut Radius | Overall Lg. | Blade Material | No-Load Strokes per Minute | Air Consumption, cfm | Air Pressure, psi | For Air Hose ID | Air Hose Included | Thread Type | Pipe Size | Gender | Each | |
Cutting Pattern—Straight, Right Curves, Left Curves | ||||||||||||||
For Use On Aluminum, Brass, Copper, Iron, Nickel, Steel, Tin | ||||||||||||||
| 1/64" | 1/64" | 7" | 11" | Steel | 2,200 | 4 | 90 | 1/4"-1/2" | No | NPT | 1/4 | Female | 0000000 | 0000000 |
Sheet Metal Cutter Drill Attachments
Straight, Right
Curves, Left Curves
Convert your drill into a sheet metal cutter to make quick, low-effort cuts without a separate power tool. Insert the bit on these attachments into your chuck to power the jaws, then slide the telescoping clamp over the drill body to hold them in place. They’re quick to install and remove, so you can switch between cutting and drilling. These attachments have a rotating collar that can turn the cutting head 360° to make cuts at any angle.
Also known as scissor-blade shears, these attachments have a bottom blade that stays in place while the upper blade moves up and down, making clean cuts without deforming edges. If your tool runs at multiple speeds, the jaws do too. Choose a slow speed for curves and corners, or a fast speed for quick, straight cuts. To extend the life of the blades, adjust the clearance between the cutting jaws to suit the thickness of the material you’re cutting.
Made from lightweight aluminum and plastic, these attachments won’t weigh down your tool, so you can make one-handed cuts. Both the width and length of the clamp are adjustable, so they can fit around most corded or cordless drills, including impact drivers. Tighten onto your drill with a thumb screw. They also include spacers for extending the clamp to fit over large drills.
For Max. Thick. | Material | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Steel | Stainless Steel | Aluminum | Copper | Blade | Housing | For Max. Drill Speed, rpm | For Drill Chuck Size Range | For Min. Drill Voltage | For Max. Drill Current, A | For Min. Drill Torque, in.-lbs. | Operating Temp. Range, °F | Features | Each | |
Cutting Pattern—Straight, Right Curves, Left Curves, Square | ||||||||||||||
For Use On Aluminum, Copper, Stainless Steel, Steel | ||||||||||||||
| 3/64" | 1/32" | 1/16" | 7/64" | Steel | Aluminum | 2,900 | 1/4"-1/2" | 100V AC, 14V DC | 7 | 300 | 32° to 100° | Rotating Collar, Telescoping Clamp | 0000000 | 0000000 |
Air-Powered Pliable Sheet Cutters
Straight, Right
Curves, Left Curves
Leave clean cut edges in a variety of pliable materials. Also known as scissor-blade shears, the bottom blade remains stationary while the upper blade moves up and down to cut. Blades do not close completely.
For Max. Thick. | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Wire Cloth | Plastic | Overall Lg. | Blade Material | No-Load Strokes per Minute | Air Consumption, cfm | Air Pressure, psi | For Air Hose ID | Air Hose Included | Thread Type | Pipe Size | Gender | Each | |
Cutting Pattern—Straight, Right Curves, Left Curves | |||||||||||||
For Use On Aluminum, Brass, Bronze, Copper, Foam, Nickel, Plastic, Rubber, Stainless Steel, Steel | |||||||||||||
| 3/64" | 1/8" | 12" | Steel | 2,500 | 4 | 90 | 1/4"-1/2" | No | NPT | 1/4 | Female | 00000000 | 0000000 |
Electric Pliable Sheet Cutters
Straight, Right
Curves, Left Curves
Produce clean edges in a variety of pliable materials. Also known as scissor-blade shears, the bottom blade remains stationary while the upper blade moves up and down to cut. Blades do not close completely.
For Max. Thick. | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Wire Cloth | Plastic | Cut Lg. | Overall Lg. | Blade Material | No-Load Strokes per Minute | Voltage | Current, A | Cord Lg., ft. | Plug Type | Specifications Met | Each | |
Cutting Pattern—Straight, Right Curves, Left Curves | ||||||||||||
For Use On Aluminum, Brass, Bronze, Copper, Foam, Nickel, Plastic, Rubber, Stainless Steel, Steel | ||||||||||||
| 3/64" | 1/8" | 2 1/4" | 16" | Steel | 2,500 | 120V AC | 5 | 8 | Two Prong | UL Listed, C-UL Listed | 00000000 | 0000000 |