McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    75 Products

    Titanium Unthreaded Spacers

    Image of Product. Front orientation. Spacers. Titanium Unthreaded Spacers.
    Get the strength you need without the extra weight. These spacers are lightweight like aluminum and resist corrosion better than stainless steel. They’re also nonmagnetic, have a high strength-to-weight ratio, and are about 40% lighter than steel spacers.
    Ultra-Corrosion-Resistant Grade 2 Titanium—Because Grade 2 titanium is 99% pure, it's even more corrosion resistant than other common titanium grades, such as Grades 5 and 9. These spacers are good for use in chemical-processing facilities since they stand up to strong acids and other harsh chemicals.
    Material Certificate with Traceable Lot Number—Spacers include a report with a traceable lot number.
    Lg.
    For Screw
    Size
    ID
    Specs.
    Met
    Certificate Type
    Each
    Ultra-Corrosion-Resistant Grade 2 Titanium
     
    3/16" OD
    1/8"No. 4
    		0.115"ASTM B348—00000000000000
    3/16"No. 4
    		0.115"ASTM B348—0000000000000
    1/4"No. 4
    		0.115"ASTM B348—0000000000000
     
    1/4" OD
    1/8"No. 8
    		0.166"ASTM B348—0000000000000
    3/16"No. 8
    		0.166"ASTM B348—0000000000000
    1/4"No. 8
    		0.166"ASTM B348—0000000000000
    5/16"No. 8
    		0.166"ASTM B348—0000000000000
    3/8"No. 8
    		0.166"ASTM B348—0000000000000
    7/16"No. 8
    		0.166"ASTM B348Material Certificate with Traceable Lot Number
    		0000000000000
    1/2"No. 8
    		0.166"ASTM B348—0000000000000
    5/8"No. 8
    		0.166"ASTM B348—0000000000000
    3/4"No. 8
    		0.166"ASTM B348—00000000000000
    7/8"No. 8
    		0.166"ASTM B348Material Certificate with Traceable Lot Number
    		00000000000000
    1"No. 8
    		0.166"ASTM B348—00000000000000
    1 1/8"No. 8
    		0.166"ASTM B348Material Certificate with Traceable Lot Number
    		00000000000000
    1 1/4"No. 8
    		0.166"ASTM B348Material Certificate with Traceable Lot Number
    		00000000000000
    1 3/8"No. 8
    		0.166"ASTM B348Material Certificate with Traceable Lot Number
    		00000000000000
    1 1/2"No. 8
    		0.166"ASTM B348Material Certificate with Traceable Lot Number
    		00000000000000
    1 5/8"No. 8
    		0.166"ASTM B348Material Certificate with Traceable Lot Number
    		00000000000000
    1 3/4"No. 8
    		0.166"ASTM B348Material Certificate with Traceable Lot Number
    		00000000000000
    1 7/8"No. 8
    		0.166"ASTM B348Material Certificate with Traceable Lot Number
    		00000000000000
    2"No. 8
    		0.166"ASTM B348—00000000000000
     
    5/16" OD
    1/8"No. 10
    		0.192"ASTM B348—0000000000000
    3/16"No. 10
    		0.192"ASTM B348—0000000000000
    1/4"No. 10
    		0.192"ASTM B348—0000000000000
     
    1/2" OD
    1/8"1/4"
    		0.252"ASTM B348—0000000000000
    3/16"1/4"
    		0.252"ASTM B348—0000000000000
    1/4"1/4"
    		0.252"ASTM B348—0000000000000
    5/16"1/4"
    		0.252"ASTM B348—0000000000000
    3/8"1/4"
    		0.252"ASTM B348—0000000000000
    7/16"1/4"
    		0.252"ASTM B348—00000000000000
    1/2"1/4"
    		0.252"ASTM B348—00000000000000
    5/8"1/4"
    		0.252"ASTM B348—00000000000000
    3/4"1/4"
    		0.252"ASTM B348—00000000000000
    7/8"1/4"
    		0.252"ASTM B348Material Certificate with Traceable Lot Number
    		00000000000000
    1"1/4"
    		0.252"ASTM B348—00000000000000
    1 1/8"1/4"
    		0.252"ASTM B348Material Certificate with Traceable Lot Number
    		00000000000000
    1 1/4"1/4"
    		0.252"ASTM B348Material Certificate with Traceable Lot Number
    		00000000000000
    1 3/8"1/4"
    		0.252"ASTM B348Material Certificate with Traceable Lot Number
    		00000000000000
    1 1/2"1/4"
    		0.252"ASTM B348Material Certificate with Traceable Lot Number
    		00000000000000
    1 5/8"1/4"
    		0.252"ASTM B348Material Certificate with Traceable Lot Number
    		00000000000000
    1 3/4"1/4"
    		0.252"ASTM B348Material Certificate with Traceable Lot Number
    		00000000000000
    1 7/8"1/4"
    		0.252"ASTM B348Material Certificate with Traceable Lot Number
    		00000000000000
    2"1/4"
    		0.252"ASTM B348—00000000000000
     

    General Purpose Washers

    Image of Product. Front orientation. Washers. General Purpose Washers.
    Your go-to metal washer for every screw size. Washers take the pressure off nuts and screws to protect mounting surfaces.
    Titanium
    The best of both worlds, these washers are lightweight like aluminum and more corrosion resistant than 316 stainless steel.
    Ultra-Corrosion-Resistant Grade 2 Titanium—Because Grade 2 titanium is 99% pure, it's even more corrosion resistant than other common titanium grades, such as Grades 5 and 9. These washers are ideal for use in chemical-processing facilities since they stand up to strong acids and other harsh chemicals.
    For Screw
    Size
    ID
    OD
    Thk.
    Specs. Met
    Pkg.
    Qty.
    Pkg.
    Ultra-Corrosion-Resistant Grade 2 Titanium
    No. 2
    		0.090"0.180"0.022" to 0.028"—1000000000000000
    No. 4
    		0.125"0.375"0.030" to 0.045"—10000000000000
    No. 6
    		0.144"0.500"0.036" to 0.045"—50000000000000
    No. 8
    		0.188"0.625"0.036" to 0.045"—50000000000000
    No. 10
    		0.203"0.750"0.036" to 0.045"—50000000000000
    1/4"
    		0.265"0.750"0.036" to 0.045"—10000000000000
    5/16"
    		0.344"1.000"0.046" to 0.055"—10000000000000
    3/8"
    		0.406"1.000"0.056" to 0.071"—10000000000000
    1/2"
    		0.531"1.062"0.074" to 0.121"ASME B18.21.110000000000000
    3/4"
    		0.812"1.500"0.108" to 0.160"ASME B18.21.1100000000000000
     

    ASME Washers

    Also known as Type B washers, these meet ASME sizing standards. They take the pressure off screws and nuts to protect your mounting surface.
    Titanium
    Image of Product. Front orientation. Washers. ASME Washers.
    The best of both worlds, these washers are lightweight like aluminum and more corrosion resistant than 316 stainless steel.
    Ultra-Corrosion-Resistant Grade 2 Titanium—Because Grade 2 titanium is 99% pure, it's even more corrosion resistant than other common titanium grades, such as Grades 5 and 9. These washers are ideal for use in chemical-processing facilities since they stand up to strong acids and other harsh chemicals.
    For Screw
    Size
    ASME
    Designation
    ID
    OD
    Thk.
    Specs. Met
    Pkg.
    Qty.
    Pkg.
    Ultra-Corrosion-Resistant Grade 2 Titanium
    1/4"
    		Wide0.281"1.000"0.051" to 0.080"ASME B18.21.1100000000000000
     

    SAE Washers

    Image of Product. Front orientation. Washers. SAE Washers.
    Originally designed for the automotive industry, these washers conform to SAE sizing standards. They generally have smaller diameters than USS washers to fit in cramped spots and are thinner to create more precise gaps. Washers distribute pressure under screws and nuts to protect your mounting surface.
    Titanium
    The best of both worlds, these washers are lightweight like aluminum and more corrosion resistant than 316 stainless steel.
    Ultra-Corrosion-Resistant Grade 2 Titanium—Because Grade 2 titanium is 99% pure, it's even more corrosion resistant than other common titanium grades, such as Grades 5 and 9. These washers are ideal for use in chemical-processing facilities since they stand up to strong acids and other harsh chemicals.
    For Screw
    Size
    ID
    OD
    Thk.
    Specs. Met
    Pkg.
    Qty.
    Pkg.
    Ultra-Corrosion-Resistant Grade 2 Titanium
    No. 8
    		0.188"0.438"0.036" to 0.065"ASME B18.21.1100000000000000
    No. 10
    		0.219"0.500"0.036" to 0.065"ASME B18.21.110000000000000
    5/16"
    		0.344"0.688"0.051" to 0.080"ASME B18.21.110000000000000
    3/8"
    		0.406"0.812"0.051" to 0.080"ASME B18.21.110000000000000
     

    Shim Stock

    Image of Product. Front orientation. Shim Stock. Sold Individually.
    Cut into custom shapes to create shims that suit your needs. With thickness tolerances as fine as a strand of hair, the shims will precisely align, space, and level components on dies, presses, and machinery.
    You can stack multiple shims to achieve your exact thickness, but stacking more than four may cause them to shift. Remember, fewer shims are better, so a couple of thicker shims are more stable than a bunch of thin shims.
    Titanium—Grade 2 titanium, 99% pure, is often used in chemical-processing plants for its resistance to strong acids and other harsh chemicals. It has a high strength-to-weight ratio.
    Certificate
    Thk.
    Thk. Tolerance
    Type
    Form
    Specs.
    Met
    Form
    Each
    Titanium
     
    6" Wide × 50" Long
    0.005"-0.0005" to 0.0005"Material Certificate
    		Paper
    		ASTM B265Roll00000000000000
    0.006"-0.0006" to 0.0006"Material Certificate
    		Paper
    		ASTM B265Roll0000000000000
    0.007"-0.0007" to 0.0007"Material Certificate
    		Paper
    		ASTM B265Roll0000000000000
    0.008"-0.0008" to 0.0008"Material Certificate
    		Paper
    		ASTM B265Roll0000000000000
    0.01"-0.001" to 0.001"Material Certificate
    		Paper
    		ASTM B265Roll0000000000000
    0.012"-0.001" to 0.001"Material Certificate
    		Paper
    		ASTM B265Roll0000000000000
    0.015"-0.001" to 0.001"Material Certificate
    		Paper
    		ASTM B265Roll0000000000000
    0.02"-0.001" to 0.001"Material Certificate
    		Paper
    		ASTM B265Roll0000000000000
     
    12" Wide × 50" Long
    0.005"-0.0005" to 0.0005"Material Certificate
    		Paper
    		ASTM B265Roll0000000000000
    0.006"-0.0006" to 0.0006"Material Certificate
    		Paper
    		ASTM B265Roll0000000000000
    0.007"-0.0007" to 0.0007"Material Certificate
    		Paper
    		ASTM B265Roll0000000000000
    0.008"-0.0008" to 0.0008"Material Certificate
    		Paper
    		ASTM B265Roll0000000000000
    0.01"-0.001" to 0.001"Material Certificate
    		Paper
    		ASTM B265Roll0000000000000
    0.012"-0.001" to 0.001"Material Certificate
    		Paper
    		ASTM B265Roll0000000000000
    0.015"-0.001" to 0.001"Material Certificate
    		Paper
    		ASTM B265Roll0000000000000
    0.02"-0.001" to 0.001"Material Certificate
    		Paper
    		ASTM B265Roll0000000000000
     
    back to top