Sign Post Base Type Sign Post Base Type |
|---|
 |  |
| Freestanding | Bolt Down |
 | |
| In Ground |
Post Finish Post Finish |
|---|
|
Bolt-Together Framing Component Bolt-TogetherFraming Component |
|---|
 |  |
| Rail | Telescoping Rail Set |
 |  |
| Bracket Fastener Set | Connector |
Material Material |
|---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement)  |
|---|
Rail Style Rail Style |
|---|
|
Finish Finish |
|---|
|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
|---|
|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
|---|
|
Sign Posts
Drive these posts into the ground or use them with a base. Fasten a sign to a post using two 2-1/2" long screws and two nuts (not included).
Galvanized steel sign posts are more corrosion resistant than painted steel posts.
Sign Posts | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
Post | Mounting Hole | Green-Painted Steel | Galvanized Steel | Optional Installation Caps | Optional Reflective Covers | |||||||
| Ht., ft. | Wd. | Weight, lbs. | Dia. | Ctr.-to-Ctr. | Each | Each | Each | Each | ||||
| 6 | 2 3/16" | 6.72 | 3/8" | 1" | 000000 | 000000 | 0000000 | 000000 | 000000 | 00 | 000000 | 000000 |
| 7 | 2 3/16" | 7.84 | 3/8" | 1" | 0000000 | 00000 | 0000000 | 00000 | 000000 | 00 | 000000 | 00000 |
| 8 | 3 1/8" | 16 | 3/8" | 1" | 000000 | 00000 | 0000000 | 00000 | 000000 | 000000 | 000000 | 00000 |
| 10 | 3 1/8" | 20 | 3/8" | 1" | 000000 | 00000 | 0000000 | 00000 | 000000 | 00000 | 000000 | 00000 |
| 12 | 3 1/8" | 24 | 3/8" | 1" | 000000 | 00000 | 0000000 | 00000 | 000000 | 00000 | 000000 | 00000 |
Sign Post Bases
Use these bases to hold a sign post. The mounting peg fits into the U-channel of a sign post.
Sign Post Mounting Pegs
Bolt these pegs directly into the ground. They fit into the U-channel of a sign post.
Base Mounting | Peg Wd. | Post Mounting | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Base Wd. | Base Lg. | Fasteners Included | Number of Holes | Hole Dia. | (A) | (B) | Peg Dp. | Fasteners Included | Number of Holes | Hole Thread Size | Material | Each | |
| 2 1/2" | 3 1/2" | No | 2 | 3/8" | 1 1/2" | 1" | 1" | No | 2 | 5/16"-18 | Aluminum | 0000000 | 000000 |
Freestanding Sign Posts
These posts have a cast iron base that's portable but hard to knock over. Mount the post to the base with the included hex head screw. Fasten a sign to the post using two 1” long screws and two nuts (not included).
Post | Mounting Hole Center-to-Center | Base | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Ht., ft. | Dia. | Material | Mounting Hole Dia. | (A) | (B) | (C) | (D) | (E) | Dia. | Weight, lbs. | Each | |
| 4 | 1 7/8" | Black-Painted Steel | 5/16" | 9" | 10" | 15" | 18" | 21" | 14" | 32 | 0000000 | 0000000 |
Bounce-Back Sign Posts
Reduce damage to signs, parking lot surfaces, and vehicles by installing these posts that rebound after contact. They have a spring at the bottom that offers 360° of flexibility.
Bounce-Back Sign Posts with Guard
The plastic guard reduces impact damage to the post and offers more protection to vehicles than other bounce-back sign posts. These posts have a spring at the bottom that offers 360° of flexibility and allows them to rebound after contact. The reflective bands increase visibility in low-light conditions.
Post | Guard | Base | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Sign Post Base Type | Ht., ft. | Dia. | Material | Ht. | Dia. | Material | Color | Band Color | Wd. | Lg. | Mounting Fasteners Included | Includes | Each | |
| Bolt Down | 8 1/2 | 1 5/8" | Steel | 52" | 7" | Plastic | Yellow | Reflective Red | 9" | 9" | Yes | Sign Mounting Brackets | 0000000 | 0000000 |
| In Ground | 8 1/2 | 1 5/8" | Steel | 52" | 7" | Plastic | Yellow | Reflective Red | __ | __ | __ | Sign Mounting Brackets | 0000000 | 000000 |
| Replacement Sign Mounting Brackets (Pkg. of 2) | 0000000 | Pkg. | 000000 |
Sign Stakes
Drive these stakes into the ground and then slide a foam or corrugated plastic sign over the top. Use a single sign stake for signs up to 18 × 24. For signs that are wider, use additional sign stakes for increased stability.
Style B are twice as thick as Style A, making them more rigid and longer lasting.
Pedestal Sign Holders
These holders come with a cover to protect signs from smudging and wear. Insert a sign or document from the top.
26”-50” tall holders have a telescoping pole to position signs at the right height.
For technical drawings and 3-D models, click on a part number.
For Max. Sign | Base | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Ht. | Wd. | Thick. | Ht. | Wd. | Material | Cover Material | Cover Color | Dia. | Weight, lbs. | Choose a Color | Each | |
| 8 1/2" | 11" | 0.188" | 26"-50" | 12" | Aluminum | PETG Plastic | Clear | 11" | 5 | 000000 | 000000 | |
| 11" | 8 1/2" | 0.188" | 26"-50" | 9 1/2" | Aluminum | PETG Plastic | Clear | 11" | 5 | 000000 | 00000 | |
| 11" | 14" | 0.188" | 26"-50" | 15" | Aluminum | PETG Plastic | Clear | 11" | 5 | 0000000 | 00000 | |
| 11" | 17" | 0.188" | 26"-50" | 18" | Aluminum | PETG Plastic | Clear | 11" | 5 | 0000000 | 000000 | |
| 14" | 11" | 0.188" | 26"-50" | 12" | Aluminum | PETG Plastic | Clear | 11" | 5 | 0000000 | 00000 | |
| 14" | 22" | 0.188" | 26"-50" | 23" | Aluminum | PETG Plastic | Clear | 13" | 7 | 0000000 | 000000 | |
| 17" | 11" | 0.188" | 26"-50" | 12" | Aluminum | PETG Plastic | Clear | 11" | 5 | 0000000 | 000000 | |
| 22" | 14" | 0.188" | 26"-50" | 15" | Aluminum | PETG Plastic | Clear | 13" | 7 | 0000000 | 000000 | |
| 24" | 18" | 1/4" | 61" | 19" | Aluminum | PETG Plastic | Clear | 19" | 15 | 0000000 | 000000 | |
A-Frame Sign Holders
Display signs on sidewalks or other areas with high foot traffic, indoors and out. Holders are designed to fit two signs, one on each side. Slide a sign in from the top and down through the two tabs; there is a slot on the bottom to hold the sign in place. Holders fold flat for easy storage.
Steel Bolt-Together Framing and Fittings
Rails are drilled with consistently spaced holes for multiple mounting options that do not require machining. Use this bolt-together framing to build guards, tables, and racks.
For technical drawings and 3-D models, click on a part number.
Rails have bolt holes on all four sides. Connect multiple rails with brackets or slide one length of rail into the next larger size and bolt together using curved-bolt or locking-pin connectors. Select connectors based on the larger size rail in the connection.
Galvanized steel rails have good corrosion resistance in wet environments.
Steel rails are lightly oiled.
Rail | ||||||||
|---|---|---|---|---|---|---|---|---|
| Ht. | Wd. | Wall Thick. | 3 ft. | 4 ft. | 6 ft. | 8 ft. | 12 ft. | |
Galvanized Steel | ||||||||
| 1" | 1" | 0.083" | 00000000 | |||||
| 1" | 1" | 0.105" | 00000000 | |||||
| 1 1/4" | 1 1/4" | 0.083" | 00000000 | |||||
| 1 1/4" | 1 1/4" | 0.105" | 00000000 | |||||
| 1 1/2" | 1 1/2" | 0.083" | 00000000 | |||||
| 1 1/2" | 1 1/2" | 0.105" | 00000000 | |||||
| 1 3/4" | 1 3/4" | 0.105" | 00000000 | |||||
| 2" | 2" | 0.083" | 00000000 | |||||
| 2" | 2" | 0.105" | 00000000 | |||||
| 2 1/4" | 2 1/4" | 0.105" | 00000000 | |||||
| 2 1/2" | 2 1/2" | 0.105" | 00000000 | |||||
Steel | ||||||||
| 1 1/2" | 1 1/2" | 0.105" | 00000000 | |||||
| 1 3/4" | 1 3/4" | 0.105" | 00000000 | |||||
| 2" | 2" | 0.105" | 00000000 | |||||
| 2 1/4" | 2 1/4" | 0.105" | 00000000 | |||||
| 2 1/2" | 2 1/2" | 0.105" | 00000000 | |||||
Telescoping rail sets include two rails that can be nested and locked together.
Rail | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Outer Ht. | Outer Wd. | Inner Ht. | Inner Wd. | Wall Thick. | Material | Mounting Fasteners Included | Includes | 4 ft. | 6 ft. | 8 ft. | |
| 1 3/4" | 1 3/4" | 1 1/2" | 1 1/2" | 0.105" | Galvanized Steel | Yes | Locking Pin, Two Nestable Rails | 00000000 | |||
| 2" | 2" | 1 3/4" | 1 3/4" | 0.105" | Galvanized Steel | Yes | Locking Pin, Two Nestable Rails | 00000000 | |||
| 2 1/4" | 2 1/4" | 2" | 2" | 0.105" | Galvanized Steel | Yes | Locking Pin, Two Nestable Rails | 00000000 | |||
| 2 1/2" | 2 1/2" | 2 1/4" | 2 1/4" | 0.105" | Galvanized Steel | Yes | Locking Pin, Two Nestable Rails | 00000000 | |||
Aluminum Bolt-Together Framing and Fittings
Half the weight of steel, this aluminum framing resists corrosion in wet environments. Rails are drilled with consistently spaced holes for multiple mounting options that do not require machining. Use this bolt-together framing to build guards, tables, and racks.
For technical drawings and 3-D models, click on a part number.
Rails have bolt holes on all four sides. Connect multiple rails with brackets and connectors.
Flanged rails have flanges that run the length of the rail to mount panels, bins, conveyor stops, and other accessories.
Flat and L-Shaped Bolt-Together Framing and Fittings
Rails are drilled with consistently spaced holes for multiple mounting options that do not require machining. Use this bolt-together framing to build guards, tables, and racks.
For technical drawings and 3-D models, click on a part number.
Zinc-plated steel rails are more corrosion resistant in wet environments than powder-coated steel.
Galvanized steel rails have better corrosion resistance in wet environments than zinc-plated steel and can be used outdoors.
304 stainless steel rails are more corrosion resistant than galvanized steel. They also have good chemical resistance.
Wd. | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| (A) | (B) | Thick. | Material | Color | 1 ft. | 3 ft. | 4 ft. | 5 ft. | 6 ft. | 8 ft. | |
Flat | |||||||||||
| 1 3/8" | __ | 0.0781" | Galvanized Steel | __ | 0000000 | ||||||
| 1 3/8" | __ | 0.08" | Zinc-Plated Steel | __ | 0000000 | ||||||
| 1 3/8" | __ | 0.08" | 304 Stainless Steel | __ | 0000000 | ||||||
| 2 1/4" | __ | 0.0469" | Galvanized Steel | __ | 0000000 | ||||||
| 2 3/4" | __ | 0.0781" | Galvanized Steel | __ | 0000000 | ||||||
L-Shaped | |||||||||||
| 1 1/4" | 1 1/4" | 0.0469" | Galvanized Steel | __ | 0000000 | ||||||
| 1 1/4" | 1 1/4" | 0.07" | Powder-Coated Steel | Blue | 0000000 | ||||||
| 1 1/2" | 1 1/2" | 0.074" | Zinc-Plated Steel | __ | 0000000 | ||||||
| 1 1/2" | 1 1/2" | 0.074" | 304 Stainless Steel | __ | 0000000 | ||||||
| 1 1/2" | 1 1/2" | 0.0781" | Galvanized Steel | __ | 0000000 | ||||||
| 1 1/2" | 2 1/4" | 0.0781" | Galvanized Steel | __ | 0000000 | ||||||
| 1 7/8" | 1 7/8" | 0.078" | Powder-Coated Steel | Blue | 0000000 | ||||||
| Green Aerosol Touch-Up Paint for Powder-Coated Steel Rails (12 oz.) | 00000000 | Each | 000000 |
Telescoping Weld-Together Rails
Create posts of varying lengths. To telescope rails, slide one length of rail into the next larger size rail (for example, a 1 3/4" height rail fits into a 2" height rail and a 3/4" dia. rail fits into a 1" dia. rail). Weld the rails together at the desired length to create strong structures. These rails are not compatible with weld-together framing and fittings.
Carbon steel rails are lightly oiled.
Galvanized carbon steel rails have good corrosion resistance in wet environments and can be used outdoors.
Aluminum rails are about half the weight of steel and resist corrosion in wet environments.
304 stainless steel rails are more corrosion resistant than galvanized carbon steel. They also have good chemical resistance.
For technical drawings and 3-D models, click on a part number.
Rail | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Ht. | Wd. | Wall Thick. | Lg. Tolerance | 2 ft. | 4 ft. | 6 ft. | 8 ft. | 12 ft. | |
Carbon Steel | |||||||||
| 3/4" | 3/4" | 0.08" | 0" to +0.125" | 0000000 | |||||
| 1" | 1" | 0.08" | 0" to +0.125" | 0000000 | |||||
| 1 3/4" | 1 3/4" | 0.105" | 0.25" to +0.5" | 00000000 | |||||
| 2" | 2" | 0.105" | 0.25" to +0.5" | 00000000 | |||||
| 2 1/4" | 2 1/4" | 0.105" | 0.25" to +0.5" | 00000000 | |||||
| 2 1/2" | 2 1/2" | 0.105" | 0.25" to +0.5" | 00000000 | |||||
Galvanized Carbon Steel | |||||||||
| 1 3/4" | 1 3/4" | 0.105" | 0.25" to +0.5" | 00000000 | |||||
| 2" | 2" | 0.105" | 0.25" to +0.5" | 00000000 | |||||
| 2 1/4" | 2 1/4" | 0.105" | 0.25" to +0.5" | 00000000 | |||||
| 2 1/2" | 2 1/2" | 0.105" | 0.25" to +0.5" | 00000000 | |||||
6060 Aluminum | |||||||||
| 3/4" | 3/4" | 0.08" | -2" to +2" | 0000000 | |||||
| 1" | 1" | 0.08" | -2" to +2" | 0000000 | |||||
304 Stainless Steel | |||||||||
| 3/4" | 3/4" | 0.08" | 0" to +0.125" | 0000000 | |||||
| 1" | 1" | 0.08" | 0" to +0.125" | 0000000 | |||||
Weld-Together Framing and Fittings
Create strong structures by welding this framing together. Add metal panels to close off openings. Slide the rail into the fitting and weld in place.
For technical drawings and 3-D models, click on a part number.
